Commit Graph

1198 Commits

Author SHA1 Message Date
Tom Rini
caad316b31 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- mvebu bubt cmd: Add A38x support (Joel)
- Clearfog: Fix SCSI boot duplication (Joel)
- Armada-37xx: Fix DDR PHY clock divider values (Marek)
2020-04-22 13:00:21 -04:00
Tom Rini
2b63959e30 Merge tag 'mmc-2020-4-22' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- iproc_sdhci memory leak fix and enable R1B resp quirk
- more mmc cmds and several mmc updates from Heinirich
- Use bounce buffer for tmio sdhci
- Alignment check for tmio sdhci
2020-04-22 08:58:41 -04:00
Heinrich Schuchardt
453d21381b mmc: adjust Kconfig for mmc sub-commands
All sub-commands of the mmc command should be shown in the Kconfig menu
next to the mmc command. This includes:

* mmc bkops
* mmc rpmb
* mmc swrite

The mmc rpmb sub-command is not usable without CONFIG_SUPPORT_EMMC_RPMB.
Add the missing dependency.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-04-22 20:41:56 +08:00
Heinrich Schuchardt
0469d84636 cmd: mmc: provide boot area protection command
Provide command 'mmc wp' to power on write protect boot areas on eMMC
devices.

The B_PWR_WP_EN bit in the extended CSD register BOOT_WP is set. The boot
area are write protected until the next power cycle occurs.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22 20:41:55 +08:00
Heinrich Schuchardt
d5210e4589 cmd: mmc: display write protect state of boot partition
Boot partitions of eMMC devices can be power on or permanently write
protected. Let the 'mmc info' command display the protection state.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-22 20:41:55 +08:00
Joel Johnson
f60a66ef5d cmd: mvebu: bubt: show image boot device
When a mismatch is found trying to write an image for one boot method
to a different boot device, print an error message including the image
header marked target boot device type.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22 14:28:15 +02:00
Joel Johnson
658854a626 cmd: mvebu: bubt: verify A38x target device type
Ensure that the device to which an image is being written includes
header information indicating boot support for the destination
device.

This is derived from the support in the SolidRun master-a38x vendor
fork.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22 14:28:15 +02:00
Joel Johnson
f41b85ee6a cmd: mvebu: bubt: correct U-Boot spelling
Replace "U-BOOT" text with correct spelling

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22 14:28:15 +02:00
Joel Johnson
8ec6db7813 cmd: mvebu: bubt: add A38x support
Add support for Armada 38x devices in bubt flashing utility.
This is based on (and streamlined from) the support in the SolidRun
master-a38x vendor fork.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-22 14:28:15 +02:00
Tom Rini
1bf65142b3 Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c
i2c changes for 2020.07
- add new i2c driver for Broadcom iproc-based socs
- fix cmd: eeprom: Staticize eeprom_i2c_bus
- i2c: muxes: pca954x: add PCA9546 variant
2020-04-21 08:28:13 -04:00
Tom Rini
94c03c7c77 Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubi
new ubi command for renaming an UBI volume
2020-04-21 08:27:56 -04:00
Marek Vasut
ce97607154 cmd: eeprom: Staticize eeprom_i2c_bus
The eeprom_i2c_bus is not used outside of this file, make it static.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20 06:47:54 +02:00
Philippe Reynes
83f7078b68 cmd: ubi: add a command to rename volume
This commit adds the command ubi rename to rename an ubi volume.
The format of the command is: ubi rename <oldname> <newname>.
To enable this command, the option CMD_UBI_RENAME must be selected.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-20 06:34:56 +02:00
Heinrich Schuchardt
0563700672 Kconfig: fix typos in CMD_BEDBUG description
Fix documentation bug reported by 'make refcheckdocs'.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-17 12:32:36 -04:00
Atish Patra
414c34ed55 image: Add compressed Image parsing support in booti.
Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-17 12:32:36 -04:00
Stefan Roese
8e434cb705 cmd: mem: Add bitflip memory test to alternate mtest
This additional bitflip memory test is inspired by the bitflip test
in memtester v4.3.0. It show some errors on some problematic GARDENA
MT7688 based boards. The other memory tests usually don't show any
errors here.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17 12:32:36 -04:00
Stefan Roese
f14bfa7ec6 cmd: mem: Use IS_ENABLED instead of alt_test variable
This patch uses the IS_ENABLED() macro to check, which mtest variant
is enabled.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17 12:32:36 -04:00
Stefan Roese
54de244c47 cmd: mem: Drop eldk-4.2 workaround and use cast in unmap_sysmem()
Use a cast instead of the "eldk-4.2" workaround for unmap_sysmem().

Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17 12:32:36 -04:00
Stefan Roese
a8c708ea9f cmd: mem: Correctly count the errors in mtest
This patch changes mtest to correctly count the overall errors and
print them even in the abort (Ctrl-C) case.

Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17 12:32:36 -04:00
Heinrich Schuchardt
fd0e30b43b cmd: fat: remove unused includes
Remove unused includes from cmd/fat.c.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17 12:32:36 -04:00
Yusuke Ashiduka
a17322329b cmd: Add unlz4 command
This command is a new command called "unlz4" that decompresses from memory
into memory.
Used with the CONFIG_CMD_UNLZ4 optionenabled.

Signed-off-by: Yusuke Ashiduka <ashiduka@fujitsu.com>
[trini: Use %zd / %zX not %ld / %lX in printf]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-17 12:32:12 -04:00
Tom Rini
cf87f7cd8c Pull request for UEFI sub-system for efi-2020-07-rc1
This pull request
 
 * provides an implementation of UEFI secure booting
 * fixes a problem with the rsa_mod_exp driver which stops some boards
   from booting when CONFIG_RSA is enabled which is needed for UEFI
   secure booting
 * enables the EFI_RNG_PROTOCOL if DM_RNG is enabled
 * fixes some function comments
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl6YjlcACgkQxIHbvCwF
 GsQ6Jg/+KVRQF0Dn2jiag8Me9ZhafZx4xGTI3LEzFD7V9kG3dmUzbO3m8a5dEevW
 bcPNA6EmcKAjyP09AZY4C8ns4sU7wzPu/GQvApD4S5+vcuNbEqRHfW6zzReNXq09
 t89DrFH+XLhGnh4uSh0hmfjrlIPVi86hs/f57vKRayrBu8W2yGPci3SNTO5Y0AY1
 to7sxP3hGlDCUhqIABWp5ylpWWUSG1MsVNcMOnHpj+jl0iWWYP46EQrGr95egQor
 gcGgUOLdOLLOHPYUIOBmo9INnS2MbvE9Mfgh5Bw7JW8DIu/Xp7r1qePQyMLsngc1
 pO5yzwMq6EQy6OjuYnXdIBXtHOlZ8rnE9pbTgyUR8T/2CdL2hqr9ddpqa4ryDABX
 iaQF8FG+KhY0XQ5EIJV7pEkvf9TMwGguJNlOkmJPeub2n9i0k1tPk0Rwq5ZWWBIn
 rHcgZXwl0On3O3f0HvfL0Oas5u9KE1HhA12h/EVmu2Muy36x2WxAAzDnsH19HzqU
 QnWBAo8VMyp3qTIZjb3y+qrxcU/joPGt9+hxmur03hzmKOJ9JNOv6vExb+yUIyXQ
 4ML6jvTvSVZbvkP++0zMKOjT8ks3xv5q84oFD5Gp4cG8ZpHpA9dj3mXM92Waepo4
 pAkko5IGQ4SqaGIBltEQzrG+cCiHHezdD/raCwAo6DgYSmfZUvc=
 =+ZDZ
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-07-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-07-rc1

This pull request

* provides an implementation of UEFI secure booting
* fixes a problem with the rsa_mod_exp driver which stops some boards
  from booting when CONFIG_RSA is enabled which is needed for UEFI
  secure booting
* enables the EFI_RNG_PROTOCOL if DM_RNG is enabled
* fixes some function comments
2020-04-16 16:41:40 -04:00
Tom Warren
0688b758a2 fdt: Fix 'system' command
'fdt systemsetup' wasn't working, due to the fact that the 'set' command
was being parsed in do_fdt() by only testing for the leading 's' instead
of "se", which kept the "sys" test further down from executing. Changed
to test for "se" instead, now 'fdt systemsetup' works (to test the
ft_system_setup proc w/o having to boot a kernel).

Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-04-16 08:07:58 -06:00
AKASHI Takahiro
525fc06744 cmd: efidebug: add "test bootmgr" sub-command
This sub-command will be used to test image authentication,
in particular, a case where efi_load_image() failed with
EFI_SECURITY_VIOLATION but we still want to try efi_start_image().
We won't run such a case under normal bootmgr because it simply
refuses to call efi_start_image() if anything but EFI_SUCCESS
is returned when loading an image.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-04-16 08:12:47 +02:00
AKASHI Takahiro
e50e2878b2 cmd: env: add "-at" option to "env set -e" command
With "-at" option, EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS
will be passed to SetVariable() to authenticate the variable.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-04-16 08:12:47 +02:00
AKASHI Takahiro
f757d04598 cmd: env: use appropriate guid for authenticated UEFI variable
A signature database variable is associated with a specific guid.
For convenience, if user doesn't supply any guid info, "env set|print -e"
should complement it.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-04-16 08:12:47 +02:00
Tom Rini
8914831860 Merge branch 'next'
Pull in changes that have been pending in our 'next' branch.  This
includes:
- A large number of CI improvements including moving to gcc-9.2 for all
  platforms.
- amlogic, xilinx, stm32, TI SoC updates
- USB and i2c subsystem updtaes
- Re-sync Kbuild/etc logic with v4.19 of the Linux kernel.
- RSA key handling improvements
2020-04-13 11:27:00 -04:00
Sean Anderson
97c7ac214e cmd: Add test and fix bugs for dm drivers
Add a test for the dm drivers command. Also fix a null pointer dereference
revealed by said test.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-09 09:18:56 -04:00
Tom Rini
1f47e2aca4 Xilinx changes for v2020.07
common:
 - Align ENV_FAT_INTERFACE
 - Fix MAC address source print log
 - Improve based autodetection code
 
 xilinx:
 - Enable netconsole
 
 Microblaze:
 - Setup default ENV_OFFSET/ENV_SECT_SIZE
 
 Zynq:
 - Multiple DT updates/fixes
 - Use DEVICE_TREE environment variable for DTB selection
 - Switch to single zynq configuration
 - Enable NOR flash via DM
 - Minor SPL print removal
 - Enable i2c mux driver
 
 ZynqMP:
 - Print multiboot register
 - Enable cache commands in mini mtest
 - Multiple DT updates/fixes
 - Fix firmware probing when driver is not enabled
 - Specify 3rd backup RAM boot mode in SPL
 - Add SPL support for zcu102 v1.1 and zcu111 revA
 - Redesign debug uart enabling and psu_init delay
 - Enable full u-boot run from EL3
 - Enable u-boot.itb generation without ATF with U-Boot in EL3
 
 Versal:
 - Enable distro default
 - Enable others SPI flashes
 - Enable systems without DDR
 
 Drivers:
 - Gem:
   - Flush memory after freeing
   - Handle mdio bus separately
 - Watchdog:
   - Get rid of unused global data pointer
   - Enable window watchdog timer
 - Serial:
   - Change reinitialization logic in zynq serial driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXoxw9wAKCRDKSWXLKUoM
 IbQxAKCK23yTy4FoN8oTGTYsbmLOA9kVUQCbBx8lg4nBeA8ihSaAnY+HMDF37YI=
 =Lg54
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.07

common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code

xilinx:
- Enable netconsole

Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE

Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver

ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3

Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR

Drivers:
- Gem:
  - Flush memory after freeing
  - Handle mdio bus separately
- Watchdog:
  - Get rid of unused global data pointer
  - Enable window watchdog timer
- Serial:
  - Change reinitialization logic in zynq serial driver

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-07 17:13:35 -04:00
Tom Rini
2b18b89156 Merge branch 'next' of git://git.denx.de/u-boot-usb into next 2020-03-31 17:24:19 -04:00
Tom Rini
150db4264d Merge branch '2020-03-31-master-imports'
- mpc8xxx GPIO, SPI bugfixes
- Add VxWorks to FIT images
- macb ethernet driver bugfix
2020-03-31 10:07:01 -04:00
Heinrich Schuchardt
71a3e5c51c cmd: mmc: fix typo 'a EMMC'
%s/a EMMC/an eMMC/g

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-03-31 10:06:52 -04:00
Heinrich Schuchardt
4ef2b0d551 efi_loader: only reserve memory if fdt node enabled
Sub-nodes of /reserved-memory may be disabled. In this case we should not
reserve memory in the memory map.

Reported-by: Patrick DELAUNAY <patrick.delaunay@st.com>
Fixes: fef907b2e4 ("efi_loader: create reservations after
ft_board_setup")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-03-28 10:45:03 +01:00
Heinrich Schuchardt
6c0ef35cdc cmd: efidebug: fix int to pointer cast
On 32 bit systems fix
warning: cast to pointer from integer of different size
[-Wint-to-pointer-cast]

Fixes: a415d61eac ("cmd: map addresses to sysmem in efidebug memmap")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-28 10:45:03 +01:00
Tom Rini
2738f0edea Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next
K3 J721E:
* OSPI boot support
* Support for loading remote cores in R5 SPL
* PMIC ESM Support
* Minor fixes for R5F and C7x remoteproc drivers

K3 AM654:
* Update AVS class 0 voltages.
* Add I2C nodes

DRA7xx/AM57xx:
* Fixed Android boot on AM57xx

AM33/AM43/Davinci:
* switch to driver model for the net and mdio driver for baltos
* Add DM/DTS support for omap video driver
* Enable fastboot on am335x-evm
2020-03-17 11:59:58 -04:00
Atish Patra
7be64b885a cmd: bootefi: Parse reserved-memory node from DT
Currently, bootefi only parses memory reservation block to setup
EFI reserved memory mappings. However, it doesn't parse the
reserved-memory[1] device tree node that also can contain the
reserved memory regions.

Add capability to parse reserved-memory node and update the EFI memory
mappings accordingly.

1. <U-Boot source>/doc/device-tree-bindings/reserved-memory/reserved-memory.txt]

Signed-off-by: Atish Patra <atish.patra@wdc.com>

Fix an endless loop.

The /reserved-memory node may have children without reg property. Remove
a superfluous debug statement.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17 08:29:52 +01:00
Heinrich Schuchardt
a415d61eac cmd: map addresses to sysmem in efidebug memmap
Addresses in the sandbox's device tree are in the sandbox's virtual address
space. If we want to compare memory reservations in the device-tree with
the output of 'efidebug memmap', we need to convert back to this address
space.

Adjust the output of the 'efidebug memmap' command.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17 08:29:52 +01:00
Heinrich Schuchardt
fef907b2e4 efi_loader: create reservations after ft_board_setup
Some memory reservations are made in ft_board_setup(). Ensure that we
create reserved memory map entries after ft_board_setup().

The downside of this patch is that if bootefi is called multiple times with
an devicetree argument superfluous reservations for the old copies of the
device tree will exist. But that is still better than missing a reservation.

Deleting the superfluous reservations is not possible because reservations
in the memory map are rounded to page size and may be coallesced.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-17 08:29:52 +01:00
Alex Kiernan
4af2a33ee5 cmd: gpio: Make gpio input return pin value again
4dbc107f46 ("cmd: gpio: Correct do_gpio() return value") correctly
changed the behaviour of the gpio command to return CMD_RET_SUCCESS or
CMD_RET_FAILURE, but any existing script which expects the return value
to be the pin value is broken by this change.

Reinstate the legacy behaviour for `gpio input` only.

Fixes: 4dbc107f46 ("cmd: gpio: Correct do_gpio() return value")
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Alex Kiernan <alex.kiernan@hivehome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-13 09:30:30 -04:00
Heinrich Schuchardt
30efb5dd43 cmd: efidebug: correct error message
Add the missing line feed at the error message if the variable referred to
by 'efidebug boot rm' does not exist.

Shorten the format string by using the variable name instead of the number
of the boot variable.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-11 08:23:05 +01:00
AKASHI Takahiro
e8bced62b6 cmd: efidebug: fix a failure of "boot rm" sub-command
There is a wrong usage of utf8_utf16_strncpy() in "boot rm" command, and
then it will end up with a failure of this command due to a wrong
value of an interim variable ("var_name16").

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-03-11 08:23:05 +01:00
Keerthy
805b3cac1e lib: elf: Move the generic elf loading/validating functions to lib
Move the generic elf loading/validating functions to lib/
so that they can be re-used and accessed by code existing
outside cmd.

While at it remove the duplicate static version of load_elf_image_phdr
under arch/arm/mach-imx/imx_bootaux.c.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-03 13:08:14 +05:30
Ilias Apalodimas
ec80b4735a efi_loader: Implement FileLoad2 for initramfs loading
Following kernel's proposal for an arch-agnostic initrd loading
mechanism [1] let's implement the U-boot counterpart.
This new approach has a number of advantages compared to what we did up
to now. The file is loaded into memory only when requested limiting the
area of TOCTOU attacks. Users will be allowed to place the initramfs
file on any u-boot accessible partition instead of just the ESP one.
Finally this is an attempt of a generic interface across architectures
in the linux kernel so it makes sense to support that.

The file location is intentionally only supported as a config option
argument(CONFIG_EFI_INITRD_FILESPEC), in an effort to enhance security.
Although U-boot is not responsible for verifying the integrity of the
initramfs, we can enhance the offered security by only accepting a
built-in option, which will be naturally verified by UEFI Secure Boot.
This can easily change in the future if needed and configure that via ENV
or UEFI variable.

[1] https://lore.kernel.org/linux-efi/20200207202637.GA3464906@rani.riverdale.lan/T/#m4a25eb33112fab7a22faa0fd65d4d663209af32f

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-28 19:37:14 +01:00
Heinrich Schuchardt
76be687288 efi_loader: implement EFI_RT_PROPERTIES_TABLE
UEFI spec 2.8 errata A replaces the RuntimeServicesSupported variable
defined in UEFI spec 2.8 by the configuration table
EFI_RT_PROPERTIES_TABLE. So let's follow suit.

Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
2020-02-26 19:32:09 +01:00
Heinrich Schuchardt
7d4d551e7d efi_loader: fix efi_install_fdt() description
In the function description use the correct parameter name.

Mention EFI_FDT_USE_INTERNAL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-02-19 12:53:36 +01:00
Tom Rini
9a8942b53d sandbox conversion to SDL2
TPM TEE driver
 Various minor sandbox video enhancements
 New driver model core utility functions
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl48iogACgkQfxc6PpAI
 reaVzAf/an3/yKe6r3CVWlcRV6H/dVg1ApnnLpX7jS0p0b++oCVvOiy7z1WPXj3k
 b1SSgENDeeZ/8EHio+Gf7ZidH/TGEj7L6YEFwd1t60GMkZiWEkNf4Z53tw482YG+
 96hoPD+ySTW+ddIdVHWAFG2I4aEiKHANJAp/ItNdD+rLbrEwNQy+eiK5JTOk80B6
 /X8AJCLZeAC1s7vs+2+WolgjT78QGzA9HHalMiublcqh0ivKKk0QeQiOKKPe8JYJ
 om5YY1TxayQ60Xmo5f39/SBfzEEklxw83sU9o1tBeYzyVUpu7fQdkxiDbWdsij77
 DgwLdeYQJGbN+hdSWE0gjTqyhW+lWA==
 =KRoA
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

sandbox conversion to SDL2
TPM TEE driver
Various minor sandbox video enhancements
New driver model core utility functions
2020-02-11 10:58:41 -05:00
Joel Johnson
72732318a9 cmd: mdc/mwc: normalize disjoint MX_CYCLIC usage
Both CMD_MX_CYCLIC and MX_CYCLIC are in use and defined in Kconfig,
but only the non-CMD version currently does anything. This changes all
usages to prefer the CMD_MX_CYCLIC option (since it's only affecting
addition of the commands), and switches defconfigs using the non-CMD
version to use the CMD version.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-09 14:58:08 +01:00
Tom Rini
89789ebd71 cmd/elf.c: Add SPDX tag
Based on reading the text of the license comment this appears to be
the BSD-2-Clause license but with an imperfect word match as
BSD-2-Clause was not (as far as I recall) a common license choice at the
time the code was written.

Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-02-07 13:59:58 -05:00
Luka Kovacic
4dbc107f46 cmd: gpio: Correct do_gpio() return value
Use the correct return value in function do_gpio() and update
commands documentation with the return values from command_ret_t enum.

CMD_RET_SUCCESS is returned on command success and CMD_RET_FAILURE is
returned on command failure.

The command was returning the pin value, which caused confusion when
debugging (#define DEBUG).

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Tested-by: Robert Marko <robert.marko@sartura.hr>
2020-02-07 13:59:58 -05:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00