Commit Graph

885 Commits

Author SHA1 Message Date
Tom Rini
4edde96111 Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-01-14 21:51:32 -05:00
Stefan Roese
f4db6c976c arm: mvebu: Add runtime detection of UART (xmodem) boot-mode
This patch adds runtime detection of the Marvell UART boot-mode (xmodem
protocol). If this boot-mode is detected, SPL will return to the
BootROM to continue the UART booting.

With this patch its now possible, to generate a U-Boot image that
can be booted either from the strapped boot-device (e.g. SPI NOR, MMC,
etc) or via the xmodem protocol from the UART. In the UART case,
the kwboot tool will dynamically insert the UART boot-device type
into the image. And also patch the load address in the header, so
that the mkimage header will be skipped (as its not expected by the
Marvell BootROM).

This simplifies the development for Armada XP / 38x based boards.
As no special images need to be generated by selecting the
MVEBU_BOOTROM_UARTBOOT Kconfig option.

Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any
more, its now completely removed.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-01-14 14:08:59 +01:00
Stefan Roese
81e33f4b65 arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig
Until now, the SoC selection for the ARCH_MVEBU platforms has been done
in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As
it needed to get selected for AXP and A38x based boards. This patch
now changes this to move the SoC selection to Kconfig. And also
uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x.
This makes things a bit clearer - especially for new board additions.

Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and
CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available
CONFIG_ARMADA_38X and CONFIG_ARMADA_XP.

And CONFIG_DDR3 is removed, as its not referenced anywhere.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-01-14 14:08:59 +01:00
Bin Meng
aefba6f1b5 tools: microcode-tool: Support parsing header file with a license block
The microcode header files in the Intel Chief River FSP package have
a license comment block. Update the microcode-tool to support parsing
it and extract the license text to the .dtsi file.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Simon Glass
25525ebe31 rockchip: Drop a debug message when outputing SPI images
There is an unnecessary sector count displayed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-08 07:59:06 -07:00
Simon Glass
9b03701a10 rockchip: Enable generation of SPI images
This feature was dropped at some point. Restore it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-08 07:59:00 -07:00
Nathan Rossi
bc36605035 tools: zynqimage: Clean up check_params
Clean up the param checking, removing some code paths that will never
happen.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Tom Rini <trini@konsulko.com>
Reported-by: Coverity (CID 133251)
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-18 13:15:57 +01:00
Tom Rini
35065cdd94 Merge git://git.denx.de/u-boot-rockchip 2015-12-16 14:50:03 -05:00
Peter Robinson
69bf2d2faf tools: env: include compiler.h
With gcc 5.2 and later we get a bunch of "error: unknown type name" for
'uint8_t', 'uint32_t' and friends.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2015-12-13 20:22:00 -05:00
Jeffy Chen
7bf274b9ca rockchip: mkimage: use imagename to select spl hdr & spl size
Our chips may have different spl size and spl header, so
use imagename(passed by "mkimage -n") to select them now.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13 17:07:29 -07:00
Jeffy Chen
5cc5b901e6 Revert "rockchip: Add max spl size & spl header configs"
This reverts commit 10b4615f9d7e177ec7fe644fbb2616e0e0956f6e

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-13 17:07:06 -07:00
Thomas Chou
8951523c6a buildman: README: add links for toolchains not available on kernel.org
Add links for toolchains not available on kernel.org.

The sh4 toolchains from kernel.org dose not work for some boards,
so use the sh from Sourcery.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-12-10 20:34:23 -07:00
Marek Vasut
3463314125 mkimage: Fix warning from fix for generating multi and script images again
Seems 6ae6e160 broke creating images in certain cases, there
are two problems with that patch.

First is that the expression "!x == 4 || !x == 6" is ambiguous.  The
intention here was "!(x == 4) || !(x == 6)" based on reading further in
the file, where this was borrowed from.  This however is interpreted by
gcc as "(!x) == 4 || (!x) == 6" and always false.  gcc-5.x will warn
about this case.

The second problem is that we do not want to test for the case of "(NOT x
is 4) OR (NOT x is 6)" but instead "(x is not equal to 4) AND (x is not
equal to 6)".  This is because in those two cases we already execute the
code question in another part of the file.  Rewrite the expression and
add parenthesis for clarity.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Philippe De Swert <philippedeswert@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
[trini: Re-word Marek's explanation]
2015-12-07 13:28:09 -05:00
Philippe De Swert
6ae6e16005 mkimage : Fix generating multi and script images
Seems 92a655c3 broke creating multi and script type images.
Since the file1:file2:file3 string does not get split up,
it fails on trying to open an non-existing file.

mkimage -A arm -O linux -T multi -C none -d zImage:splash.bmp:device.dtb uimage
tools/mkimage: Can't open zImage:splash.bmp:device.dtb: No such file or directory

Since the sizes of the different parts seem to get added in the actual
routine that handles multi and script type images, we can probably skip the
bit of the code that causes the failure for that type of images.

Signed-off-by: Philippe De Swert <philippedeswert@gmail.com>
2015-12-05 18:22:35 -05:00
Jeffy Chen
3641339eff rockchip: Add support for rk's second level loader
The Rockchip boot ROM could load & run an initial spl loader,
and continue to load a second level boot-loader(which stored
right after the initial loader) when it returns.
Modify idblock generation code to support it.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 08:07:22 -07:00
Jeffy Chen
6ae5860942 rockchip: Add max spl size & spl header configs
Our chips may have different max spl size and spl header, so
we need to add configs for that.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Dropped CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
Added $(if...) to tools/Makefile to fix widespread build breakage
Signed-off-by: Simon Glass <sjg@chromium.org>

Series-changes: 8
- Drop CONFIG_ROCKCHIP_MAX_SPL_SIZE from rk3288_common.h,
- Add $(if...) to tools/Makefile to fix widespread build breakage
2015-12-01 08:07:22 -07:00
Reinhard Pfau
76b391cdee tools/kwbimage: fix size computations for v1 images
Fix computation of haeder size and binary header size.
Size of opt header and some 32bit values were not taken into account. This could
result in invalid boot images (due to the wrong binary header size, the image could
claim to have another extension header after the binary extension although there
is none).

Use "uint32_t" instead of "unsigned int" for header size computation.

Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-11-29 16:02:44 +01:00
Reinhard Pfau
a8840dced0 tools/kwbimage: fix endianess issue
KWB image header values are in little endian (LE).
So adding appropriate cpu_to_leXX() calls to allow building those images
on BE hosts, too.

Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
2015-11-29 16:02:44 +01:00
Stefan Roese
7772085930 tools/kwbimage.c: Make sure that the resulting image is 4-byte aligned
With the dtb added to the main U-Boot image, it can happen, that
the resulting image is not 4-byte aligned. As the dtb tends to
be unaligned. But the image needs to be 4-byte aligned. At least the
Marvell hdrparser tool complains if its unaligned. By returning 1 here
in kwbimage_generate(), called via tparams->vrec_header() in mkimage.c,
mkimage will automatically pad the resulting image to a 4-byte size
if necessary.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
2015-11-29 16:02:44 +01:00
Nathan Rossi
66eef1e780 tools: zynqimage: Add Xilinx Zynq boot header generation to mkimage
As with other platforms vendors love to create their own boot header
formats. Xilinx is no different and for the Zynq platform/SoC there
exists the "boot.bin" which is read by the platforms bootrom. This
format is described to a useful extent within the Xilinx Zynq TRM.

This implementation adds support for the 'zynqimage' to mkimage. The
implementation only considers the most common boot header which is
un-encrypted and packed directly after the boot header itself (no
XIP, etc.). However this implementation does take into consideration the
other fields of the header for image dumping use cases (vector table and
register initialization).

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-19 13:09:21 +01:00
Stefano Babic
2cb11b35e8 Allow fw env tools to be available as library
Sometimes it can be useful to link the fw_ tools instead
of having the fw_setenv/fw_printenv installed.
Patch exports the tool as library and allowes to link it
with own programs.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-18 08:47:03 -05:00
Michael Heimpold
9884f44cab tools/env: allow config filename to be passed via command line argument
When for example generating/manipulating SD card/eMMC images which
contain U-Boot and its environment(s), it is handy to use a given
configuration file instead of the compiled-in default one.
And since the default configuration file is expected under /etc
it's hard for an usual linux user account without special permissions
to use fw_printenv/fw_setenv for this purpose.
So allow to pass an optional filename via a new '-c' command
line argument.

Example:

$ ln -s fw_printenv tools/env/fw_setenv
$ cat fw_env.config
test.img 0x20000 0x20000
test.img 0x40000 0x20000

$ tools/env/fw_printenv -c ./fw_env.config fdt_file
fdt_file=imx28-duckbill.dtb

$ tools/env/fw_setenv -c ./fw_env.config fdt_file imx28-duckbill-spi.dtb

$ tools/env/fw_printenv -c ./fw_env.config fdt_file
fdt_file=imx28-duckbill-spi.dtb

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2015-11-18 08:47:02 -05:00
Stefan Roese
ea8b6877a8 tools/kwbimage.c: Fix generation of binary header
The binary header ends with one lword, defining if another header
follows this one. This additions 4 bytes need to be taken into
account in the generation of the header size. And the complete
4 bytes at the end of this binary header need to get cleared.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
2015-11-17 23:41:41 +01:00
Vincent Stehlé
1ca8f8818b tools/proftool: fix use-after-free
The read_trace_config() can dereference the line pointer after freeing
it on its error path. Avoid that.

This was found by Coverity Scan.

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Simon Glass <sjg@chromium.org>
2015-11-16 17:22:18 -05:00
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Simon Glass
f403914dfc fdtgrep: Simplify the alias generation code
We don't need to allocate a new region list when we run out of space.
The outer function can take care of this for us.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:51 +01:00
Thomas Huth
310ae37edb Fix bad return value checks (detected with Coccinelle)
In the "Getting Started with Coccinelle - KVM edition" presentation that
has been held by Julia Lawall at the KVM forum 2015 (see the slides at
http://events.linuxfoundation.org/sites/events/files/slides/tutorial_kvm_0.pdf),
she pointed out some bad return value checks in U-Boot that can be
detected with Coccinelle by using the following config file:

@@
identifier x,y;
identifier f;
statement S;
@@
x = f(...);
(
 if (x < 0) S
|
 if (
-     y
+     x
 < 0) S
)

This patch now fixes these issues.

Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2015-10-24 13:50:30 -04:00
Stefan Roese
9b163d8c4e kwbimage: Align payload size to 4 bytes
The MVEBU BootROM does not allow non word aligned payloads.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-21 02:25:01 +02:00
Tom Rini
297faccca2 Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-10-13 08:37:38 -04:00
Vagrant Cascadian
0219e4bfb4 Fix variation in timestamps caused by timezone differences.
When building with SOURCE_DATE_EPOCH set, avoid use of mktime in
default_image.c, which converts the timestamp into localtime. This
causes variation based on timezone when building u-boot.img and
u-boot-sunxi-with-spl.bin targets.

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Tested-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Paul Kocialkowski <contact@paulk.fr>
2015-10-11 17:12:12 -04:00
Tom Rini
354973076a tools/mkimage.c: Clarify help text for -D slightly
Try and make it clear that -D will replace all arguments passed to dtc
and is not appending them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-11 17:12:11 -04:00
Troy Kisky
61903b759a imximage: fix commands other than write_data
When CHECK_BITS_SET was added, they forgot to add
a new command table, and instead overwrote the
previous table.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-10-07 13:43:15 +02:00
Troy Kisky
835c30e368 imximage: header.length of 4 is valid
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2015-10-07 13:24:35 +02:00
Tom Rini
2959f936c5 Merge git://git.denx.de/u-boot-marvell 2015-09-30 20:20:59 -04:00
Stefan Roese
e29f1db3dd tools: kwboot: Add support for UART boot mode patching for Armada XP/38x
Currently, kwboot only allows dynamic UART boot mode patching for SoCs
with header version 0 (Orion, Kirkwood). This patch now enables this "-p"
feature also for SoCs with header version 1 (Armada XP / 38x etc). With
this its possible now to use the UART boot mode without on images that
are generated for other boot devices, like SPI. So no need to change
BOOT_FROM to "uart" for UART xmodem booting any more.

Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
2015-10-01 02:02:06 +02:00
Bernhard Nortmann
a188438175 sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant
This patch follows up on a discussion of ways to improve support
for the sunxi FEL ("USB boot") mechanism, especially with regard
to boot scripts, see:
https://groups.google.com/d/msg/linux-sunxi/wBEGUoLNRro/rHGq6nSYCQAJ

The idea is to convert the (currently unused) "pad" bytes in the
SPL header into an area where data can be passed to U-Boot. To
do this safely, we have to make sure that we're actually using
our "sunxi" flavor of the SPL, and not the Allwinner boot0.

The modified mksunxiboot introduces a special signature to the
SPL header in place of the "pub_head_size" field. This can be
used to reliably distinguish between compatible versions of sunxi
SPL and anything else (older variants or Allwinner's boot0).

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-29 11:50:07 +02:00
Bernhard Nortmann
e954eb8028 sunxi: move SPL-related definitions to platform-specific include
The sunxi platform currently doesn't seem to make any use of the
asm/arch-sunxi/spl.h file. This patch moves some declarations from
tools/mksunxiboot.c into it.

This enables us to reuse those definitions when extending the
sunxi board code (boards/sunxi/boards.c).

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-29 11:50:07 +02:00
Bin Meng
4440ececed tools: moveconfig: Update the URL for nds32 toolchain
Give a full URL for a working nds32 toolchain for U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-28 11:03:55 -04:00
Josh Wu
3e4dad5032 tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seed
As 'time(0) | getpid()' will have a lot of duplicated value. It is not a
expected behavior. We expect different value for the seed when when run
it in many times.

So this patch will left shift the getpid() and add to time(0). That
avoid duplicated value.

Test command is like:
  % RUN=0; while [ $RUN -lt 10000 ]; do
  tools/gen_eth_addr; RUN=$(($RUN+1)); done | sort | uniq | wc -l
  10000

This patch is incorporated with suggestions made by Wolfgang Denk and Andreas
Bießmann. Thanks them a lot.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Tested-by: Wolfgang Denk <wd@denx.de>
2015-09-28 10:48:25 -04:00
Michael Heimpold
b5e7586a73 mxs: mxsboot: fix endianess for sd boot images
Running mxsboot on a big-endian system produces a sd image which
cannot be started by the i.MX28 ROM. It complains on the debug
uart as following:
0x8020a009
          0x80502008
0x8020a009
          0x80502008
...

Enforcing all fields within the BCB to little-endian make
the image bootable again.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2015-09-13 10:19:40 +02:00
Tom Rini
b1fc3c56d2 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2015-09-11 13:05:05 -04:00
Siarhei Siamashka
bfb05d0187 sunxi: Ensure that 'mksunxiboot' tool produces deterministic output
Currently some uninitialized padding bytes are written to the output
file, as can be confirmed with valgrind:

$ valgrind tools/mksunxiboot spl/u-boot-spl.bin spl/sunxi-spl.bin

==5581== Syscall param write(buf) points to uninitialised byte(s)
==5581==    at 0x4F0F940: __write_nocancel (in /lib64/libc-2.20.so)
==5581==    by 0x400839: main (in /tmp/u-boot/tools/mksunxiboot)
==5581==  Address 0xffeff5d3c is on thread 1's stack
==5581==  in frame #1, created by main (???)

This patch fixes the problem by clearing the whole structure instead
of just a portion of it.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-10 20:20:45 +02:00
Simon Glass
8270e3c12e buildman: Improve the config comparison feature
At present buildman can compare configurations between commits but the
feature is less useful than it could be. There is no summary by architecture
and changes are not reported on a per-board basis.

Correct these deficiencies so that it is possible to see exactly what is
changing for any number of boards.

Note that 'buildman -b <branch> -C' is recommended for any build where you
will be comparing configuration. Without -C the correct configuration will
not be reported since changes will often not be picked up.

Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Masahiro Yamada
8d3595a42b Revert "patman: use -D option for git format-patch"
This reverts commit 19b4a33698.

Since that commit, patman generates useless patches for file removal;
"git format -D" prints only the header but not the diff when deleting
files, and "git am" always refuses such patches.

The following is the quotation from "man git-format-patch":

  -D, --irreversible-delete
    Omit the preimage for deletes, i.e. print only the header but
    not the diff between the preimage and /dev/null. The resulting
    patch is not meant to be applied with patch nor git apply; this
    is solely for people who want to just concentrate on reviewing
    the text after the change. In addition, the output obviously
    lack enough information to apply such a patch in reverse, even
    manually, hence the name of the option.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Bin Meng
e6378e1da2 x86: ifdtool: Support checking region overlap before U-Boot
We have the capability to check regions written after U-Boot that
do not overlap. Since regions can also be written before U-Boot,
add such check for these too.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Andy Pont <andy.pont@sdcsystems.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Tom Rini
c9feb427ab Merge git://git.denx.de/u-boot-rockchip 2015-09-03 14:57:09 -04:00
Sjoerd Simons
dd39bcaffb rockchip: Drop first 32kb of zeros from the rkSD image type
Instead of creating a rockchip SPL SD card image with 32KB of zeros
which can be written to the start of an SD card, create the images with
only the useful data that should be written to an offset of 32KB on the
SD card.

The first 32 kilobytes aren't needed for bootup and only serve as
convenient way of accidentally obliterating your partition table.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:25 -06:00
Simon Glass
10b84fe1b5 rockchip: Add support for the SPI image
The Rockchip boot ROM requires a particular file format for booting from SPI.
It consists of a 512-byte header encoded with RC4, some padding and then up
to 32KB of executable code in 2KB blocks, separated by 2KB empty blocks.

Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be
converted to this format. This allows booting from SPI flash on supported
machines.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00
Simon Glass
f9a3c278b9 rockchip: Add support for the SD image
The Rockchip boot ROM requires a particular file format. It consists of
64KB of zeroes, a 512-byte header encoded with RC4, and then some executable
code.

Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be
converted to this format.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00
Simon Glass
a131c1f442 rockchip: Add the rkimage format to mkimage
Rockchip SoCs require certain formats for code that they execute, The
simplest format is a 4-byte header at the start of a binary file. Add
support for this so that we can create images that the boot ROM understands.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02 21:28:23 -06:00