Commit Graph

8058 Commits

Author SHA1 Message Date
Wolfgang Denk
a3455c0051 TQM834x: use buffered writes to accelerate writing to flash
Also enable display of 'E'mpty sectors in "flinfo" output.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:39:52 +02:00
Wolfgang Denk
4681e673a5 TQM834x: add FDT support
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:39:52 +02:00
Wolfgang Denk
929b79a0b5 TQM834x: fix environment size; add redundant env.
Also reserve more space for U-Boot as it will probably grow soon.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-06-12 20:39:52 +02:00
Thomas Lange
2ae0f35fd6 ARM DaVinci: Reset with watchdog enabled
Once the Davinci watchdog has been enabled, the timeout
value cannot be changed. If the timeout in use is long,
it can take a long time for card to reset. By writing
an invalid service key, we can trigger an immediate reset.

Signed-off-by: Thomas Lange <thomas@corelatus.se>
2009-06-12 20:39:51 +02:00
Wolfgang Denk
6cc7ba9ed4 video: Add an option to skip video initialization
This patch adds an option to skip the video initialization on for all
video drivers. This is needed for the CPCI750 which can be built as
CPCI host and adapter/target board. And the adapter board can't
access the video cards located on the CompactPCI bus.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>

Rebased against simplifying patch.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-12 20:39:51 +02:00
Wolfgang Denk
f62f64692f drv_video_init(): simplify logic
Simplify nesting of drv_video_init() and use a consistent way of
indicating failure / success. Before, it took me some time to realize
which of the returns was due to an error condition and which of them
indicated success.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
2009-06-12 20:39:51 +02:00
Jean-Christophe PLAGNIOL-VILLARD
1699da6297 at91: regroup IP hw init in one file per soc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:51 +02:00
David Brownell
28b00324be dm355 evm support
Initial U-Boot support for the DaVinci DM355 EVM.  This is a board
from Spectrum Digital.  Board docs include schematic and firmware
for its microcontroller:

  http://c6000.spectrumdigital.com/evmdm355/revd/

Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:

  http://focus.ti.com/docs/prod/folders/print/tms320dm355.html

This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART).  In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:51 +02:00
Sanjeev Premi
136cf92dc9 OMAP3EVM: Set default bootfile
The current configuration doesn't define default
bootfile; leading to this warning at execution:

OMAP3_EVM # dhcp
...
...
DHCP client bound to address 192.168.1.11
*** Warning: no boot file name; using 'AC18BE16.img'
TFTP from server 0.0.0.0; our IP address is 192.168.1.11;
sending through gateway 192.168.1.1
Filename 'AC18BE16.img'.
Load address: 0x82000000
Loading: *
TFTP error: 'File not found' (1)

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-06-12 20:39:51 +02:00
s-paulraj@ti.com
1a09d05abf ARM DaVinci: Minor Updates to base addresses
Patch adds base addresses for DaVinci DM365. Updated patches for DM365
will be posted soon.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-06-12 20:39:50 +02:00
Tom Rix
de193e8e36 ZOOM2 Add support for debug board detection.
The logicpd web site is a good source for general information on this board.
Please start looking here if the below links are broken.
http://www.logicpd.com

This is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf

This is a pdf of the product quick start guide.
The debug board is described here.
http://support.logicpd.com/downloads/1165/

This is a wiki showing the debug board in use
https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP

The zoom2 has an auxillary board that contains the serial, net, jtag and
battery simulator.  This change supports a runtime check if the debug board is
connected.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:50 +02:00
Tom Rix
0c872ecd01 OMAP3 Port kernel omap gpio interface.
Port version 2.6.27 of the linux kernel's omap gpio interface to u-boot.
The orignal source is in linux/arch/arm/plat-omap/gpio.c

See doc/README.omap3 for instructions on use.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:50 +02:00
Tom Rix
376aee78dd ZOOM2 Add initial support for Zoom2
Zoom2 is a new board from Texas Instruments and LogicPD

The logicpd web site is a good source for general information on this board.
Please start looking here if the below links are broken.
http://www.logicpd.com

This is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
This is the product description web page
http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp

This patch provides a zoom2 base target by copying zoom1 and by making some
obvious changes.

To configure, run
make omap3_zoom2_config

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:50 +02:00
Sandeep Paulraj
53925acf1b ARM DaVinci:Consolidate common u-boot.lds
The u-boot.lds is common for all DaVinci boards. The patch removes
multiple instances and moves the u-boot.lds to /cpu/arm926ejs/davinci
folder. This addresses one of the comments i received while submitting
patches for DM3xx

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2009-06-12 20:39:49 +02:00
Tom Rix
68a531fd46 OMAP Consolidate common u-boot.lds to cpu layer.
The u-boot.lds file is common for all omap boards.
Move a cleaned up version to the cpu layer and add makefile logic to use it.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
65a76d4f94 arm/dcc: add xscale support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
66e8f9da68 arm/dcc: use static support to allow to use it at anytime
the dcc can be used at the start of the cpu

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
7893aa1eb6 ARM: Update mach-types
update against linux v2.6.29

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2907798926 arm920/926/926: remove non needed header
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:49 +02:00
David Brownell
269dfea017 davinci dm6446evm NAND update
This updates the optional (non-default!) NAND support for the
DaVinci DM6446 EVM:

 - include MTD partitioning, defaulting to what Linux uses

 - use a flash-based BBT, which among other things speeds bootup

This matches code that's now queued for mainline Linux, and might
even merge in an upcoming 2.6.30-rc; and the MTIDS are set up so
that the U-Boot $mtdparts environment variable can be passed as-is
on the kernel command line as a cmdlinepart override.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:49 +02:00
David Brownell
7a4f511b59 davinci: display correct clock info
Move the clock-rate dumping code into the cpu/.../davinci area
where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
updating the format and showing the DSP clock (where relevant).

Switch boards to use the cpuinfo() hook for this stuff.

Remove a few now-obsolete PLL #defines.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:49 +02:00
Tom Rix
daea928829 ZOOM1 Remove more legacy NAND defines.
These legacy NAND defines are no longer needed by this target.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:49 +02:00
Tom Rix
65fd21c80f LED Add documentation describing the status_led and colour led API.
This document describes the u-boot status LED API.
This allows common u-boot commands to use a board's leds to
provide status for activities like booting and downloading files.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:49 +02:00
Tom Rix
7cdf804f34 ARM Add blue colour LED to status_led.
There is exiting support for red,yellow,green but no blue.
The main LED on the zoom2 is a blue LED.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:49 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b54384e3ba arm: timer and interrupt init rework
actually the timer init use the interrupt_init as init callback
which make the interrupt and timer implementation difficult to follow

so now rename it as int timer_init(void) and use interrupt_init for interrupt

btw also remane the corresponding file to the functionnality implemented

as ixp arch implement two timer - one based on interrupt - so all the timer
related code is moved to timer.c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5b4bebe1d2 OMAP3: Reorganize Makefile style
Reformat COBJS handling.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b196698271 OMAP3: Remove dublicated interrupt code
Remove duplicated interrupt code. Original, identical code can be found
in lib_arm/interrupts.c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ac7260a419 at91rm9200: move reset code to reset.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
2c75c78d94 ixp/interrupts: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
8fc3bb4b06 arm: cleanup remaining CONFIG_INIT_CRITICAL
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
c20e28f49a arm946es: remove non used timer
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
David Brownell
f1d944e30e davinci: add basic dm355/dm350/dm335 support
Add some basic declarations for DaVinci DM355/DM350/DM335 support,
keyed on CONFIG_SOC_DM355.  (DM35X isn't quite right because the
DM357 is very different; while the DM355 is like a DM355 without
the MPEG/JPEG coprocessor).

These have different peripherals than the DM6446, and some of
the peripherals are at different addresses.  Notably for U-Boot,
there's no EMAC, and the NAND controller address is different

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:48 +02:00
David Brownell
bd36fdc146 davinci: fix dm644x buglets
Fix two buglets in the dm644x support:  don't set two must-be-zero
bits in the UART management register; and only include the I2C hooks
if the I2C driver is being included.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:48 +02:00
David Brownell
f79043681f davinci: split out some dm644x-specific bits from psc
Split out DaVinci DM6446-specific bits from more generic bits:

 - Add a CONFIG_SOC_DM644X.  All current boards use DM6446 chips;
   DM6443 and DM6441 chips differ in available peripherals.

 - Move most DM644X-specific bits from psc.c to a new dm644x.c file,
   which is conditionally built.  It provides device-specific setup.

Plus minor coding style and comment updates with respect to the PSC.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:48 +02:00
David Brownell
48ef572955 davinci: cpu-specific build uses conditional make syntax
Update cpu/arm926ejs/davinci/Makefile to use COBJ-y type syntax.
Add the first conditional: for EMAC driver support.  Not all
chips have an EMAC; and boards might not use it, anyway.

This doesn't touch PHY configuration; that should eventually
become conditional too.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:47 +02:00
David Brownell
7b7808ae6d davinci: move psc support board-->cpu
Move DaVinci PSC support from board/* to cpu/* where it belongs.
The PSC module manages clocks and resets for all DaVinci-family
SoCs, and isn't at all board-specific.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:47 +02:00
David Brownell
84f7411cb9 DaVinci now respects SKIP_LOWLEVEL_INIT
Don't needlessly include lowlevel init code; that's only really
needed with boot-from NOR (not boot-from-NAND).  The 2nd stage
loader (UBL) handles that before it loads U-Boot.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:47 +02:00
David Brownell
641e0925e4 DaVinci Ethernet cleanup
Chips without the EMAC controller won't need the utilities
it uses to read an Ethernet address from EEPROM; so don't
include them needlessly.

Use is_valid_ether() to validate the address from EEPROM.
All-zero addresses aren't the only invalid addresses.
A fully erased EEPROM returns all-ones, also invalid...

Switch those Ethernet utilities to use "%pM" for printing
MAC addresses; and not say ROM when they mean EEPROM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-12 20:39:47 +02:00
Stefan Roese
c790b04d23 lib_arch/board.c: Move malloc initialization before flash_init()
This patch moves the malloc initialization before calling flash_init().
Upcoming changes to the NOR FLASH common CFI driver with optional
MTD infrastructure and MTD concatenation support will call malloc().
And nothing really speaks against enabling malloc just a little earlier
in the boot stage. Some architectures already enable malloc before
calling flash_init() so they don't need any changes here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Scott McNutt <smcnutt@psyent.com>
Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:39:47 +02:00
Stefan Roese
d873133f2b ppc4xx: Add Sequoia RAM-booting target
This patch adds another build target for the AMCC Sequoia PPC440EPx
eval board. This RAM-booting version is targeted for boards without
NOR FLASH (NAND booting) which need a possibility to initially
program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000)
configured to setup the SDRAM, this debugger can load this RAM-
booting image to the target address in SDRAM (in this case 0x1000000)
and start it there. Then U-Boot's standard NAND commands can be
used to program the NAND FLASH (e.g. "nand write ...").

Here the commands to load and start this image from the BDI2000:

440EPX>reset halt
440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin
440EPX>go 0x1000000

Please note that this image automatically scans for an already
initialized SDRAM TLB (detected by EPN=0). This TLB will not be
cleared. This TLB doesn't need to be TLB #0, this RAM-booting
version will detect it and preserve it. So booting via BDI2000
will work and booting with a complete different TLB init via
U-Boot works as well.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Mike Frysinger
837db3d87f tools/envcrc: add --binary option to export embedded env
The --binary option to envcrc can be used to export the embedded env as a
binary blob so that it can be manipulated/examined/whatever externally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 20:39:47 +02:00
Ben Warren
18cc7afd9a Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
All in-tree PPC4xx boards now use CONFIG_NET_MULTI

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Matthias Fuchs
70be6c2d40 4xx: Add support for DP405 hardware variants
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Matthias Fuchs
de47a34d4d 4xx: Remove binary cpld bitstream from DP405 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on DP405 boards.

Because u-boot with an external cpld bitstream may not
take more space in flash than before the u-boot binary is
shrinked a little bit. Some unused featues have been
removed therefore.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Matthias Fuchs
700d553fd3 4xx: Remove binary cpld bitstream from VOM405 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on VOM405 boards.

Because u-boot with an external cpld bitstream may not
take more space in flash than before the u-boot binary is
shrinked a little bit.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:46 +02:00
Matthias Fuchs
0bb1063036 4xx: Remove binary cpld bitstream from PMC405 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on PMC405 boards.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:46 +02:00
Matthias Fuchs
7cc635fb35 4xx: Remove binary cpld bitstream from CMS700 board
This patch removes the cpld binary bitstream that is
used by esd's cpld command on CMS700 boards.

Because u-boot with an external cpld bitstream may not
take more space in flash than before the u-boot binary is
shrinked a little bit. Some unused featues have been
removed therefore.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:46 +02:00
Matthias Fuchs
c1b2f79788 esd/common: extend cpld command with address parameter
This patch adds support for an address parameter to esd's
cpld command. This is in preparation to remove compiled-in
binary cpld (xsvf) bitstreams.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:46 +02:00
Peter Tyser
9166b77635 cmd_i2c: Fix i2c help command output when CONFIG_I2C_MUX
When CONFIG_I2C_MUX was defined the output of 'help i2c' was not
correct, eg:

=> help i2c
i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes.
speed [speed] - show or set I2C bus speed
i2c dev [dev] - show or set current I2C bus
...

It has been changed to:
i2c speed [speed] - show or set I2C bus speed
i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes
i2c dev [dev] - show or set current I2C bus
...

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:46 +02:00
Peter Tyser
0a45a6357b cmd_i2c: Clean up trivial helper functions
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-06-12 20:39:46 +02:00