Commit Graph

828 Commits

Author SHA1 Message Date
Masahiro Yamada
19b4a33698 patman: use -D option for git format-patch
This allows Patman to generate smaller patches for file removal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-08-26 07:54:13 -07:00
Simon Glass
f86f0c1897 x86: ifdtool: Drop microcode from the device tree when collating
When ifdtool collates the microcode into one place it effectively creates
a copy of the 'data' properties in the device tree microcode nodes. This
is wasteful since we now have two copies of the microcode in the ROM.

To avoid this, remove the microcode data from the device tree and shrink it
down. This means that there is only one copy and the overall ROM space used
by the microcode does not increase.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:10 -07:00
Simon Glass
b098032387 x86: ifdtool: Support collating microcode into one place
The Intel Firmware Support Package (FSP) requires that microcode be provided
very early before the device tree can be scanned. We already support adding
a pointer to the microcode data in a place where early init code can access.

However this just points into the device tree and can only point to a single
lot of microcode. For boards which may have different CPU types we must
support multiple microcodes and pass all of them to the FSP in one place.

Enhance ifdtool to scan all the microcode, place it together in the ROM and
update the microcode pointer to point there. This allows us to pass multiple
microcode blocks to the FSP using its existing API.

Enable the flag in the Makefile so that this feature is used by default for
all boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:10 -07:00
Simon Glass
88cf322e44 x86: ifdtool: Split microcode linking into its own function
The code to set up the microcode pointer in the ROM shares almost nothing
with the write_uboot() function.

Move it into its own function so it will be easier to extend.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:10 -07:00
Simon Glass
3c7aab23a4 x86: ifdtool: Check that U-Boot does not overlap other regions
Since U-Boot and its device tree can grow we should check that it does not
overlap the regions above it. Track the ROM offset that U-Boot reaches and
check that other regions (written after U-Boot) do not interfere.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:10 -07:00
Stefan Agner
4fbe41c4af logos: add Toradex logo
Use the boot loader splash screen from WinCE which matches our
wallpapers position wise. Although the logo is an 8-bit indexed BMP as
well colours looked odd at first in U-Boot. After converting to full
RGB palette and converting back to an indexed BMP using imagemagick
the Logo showed up properly.

$ convert tools/logos/toradex-rgb.bmp -type Palette -colors 256 \
-compress none -verbose BMP3:tools/logos/toradex.bmp

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-08-13 07:19:37 -04:00
Bin Meng
0112432798 gitignore: Add defconfig and fdtgrep
Ignore defconfig and tools/fdtgrep.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:39 -06:00
Tom Rini
7a1af7a79b Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-08-02 07:40:37 -04:00
Simon Glass
9649e152cb patman: Don't run patman when it is imported as a module
Commit 488d19c (patman: add distutils based installer) has the side effect
of making patman run twice with each invocation. Fix this by checking for
'main program' invocation in patman.py. This is good practice in any case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
2015-07-31 07:31:12 -06:00
Chris Packham
488d19cbca patman: add distutils based installer
To make it easier to use patman on other projects add a distutils style
installer. Now patman can be installed with

  cd u-boot/tools/patman && python setup.py install

There are also the usual distutils options for creating source/binary
distributions of patman.

Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:25 -06:00
Bin Meng
9f244b27cf buildman: Correct '--fetch-arch' command documentation
The doc wrongly put sandbox in the '--fetch-arch' command. Remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:22 -06:00
Paul Kocialkowski
f3f431a712 Reproducible U-Boot build support, using SOURCE_DATE_EPOCH
In order to achieve reproducible builds in U-Boot, timestamps that are defined
at build-time have to be somewhat eliminated. The SOURCE_DATE_EPOCH environment
variable allows setting a fixed value for those timestamps.

Simply by setting SOURCE_DATE_EPOCH to a fixed value, a number of targets can be
built reproducibly. This is the case for e.g. sunxi devices.

However, some other devices might need some more tweaks, especially regarding
the image generation tools.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-27 15:03:14 -04:00
Masahiro Yamada
9c57487752 tools: remove mpc86x_clk tool
This is commented out in the Makefile for more than 10 years.
I assume it is proof that this tool is unused.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Pantelis Antoniou <panto@intracom.gr>
2015-07-27 15:03:13 -04:00
Adrian Alonso
0b7f7c339c imx: imximage: add new CHECK/CLR BIT command
* Extend imximage DCD version 2 to support DCD commands
  CMD_WRITE_CLR_BIT 4 [address] [mask bit] means:
    while ((*address & ~mask) != 0);
  CMD_CHECK_BITS_SET 4 [address] [mask bit] means:
    while ((*address & mask) != mask);
  CMD_CHECK_BITS_CLR 4 [address] [mask bit] means:
    *address = *address & ~mask;
* Add set_dcd_param_v2 helper function to set DCD
  command parameters

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-07-26 12:07:14 +02:00
Stefan Roese
7ddf8cfb0d kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS
To use this offset for other boot device (like SDIO/MMC), lets rename
it to a more generic name. This will be used be the SDIO/MMC SPL boot
support for the A38x.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
2015-07-24 09:46:21 +02:00
Stefan Roese
1bbe63c3f2 kwbimage: Add support for SDIO/MMC boot device selection
This patch adds support to select the "sdio" as boot device in the
kwbimage.cfg file. This line selects this SDIO device:

BOOT_FROM  sdio

Tested on Marvell DB-88F6820-GP board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <eibach@gdsys.de>
2015-07-24 09:45:56 +02:00
Simon Glass
92a655c326 mkimage: Set up a file size parameter and keep it updated
Some functions called by mkimage would like to know the output file size.
Initially this is the same as the input file size, but it may be affected by
adding headers, etc.

Add this information to the image parameters.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-07-21 17:39:29 -06:00
Simon Glass
1043d0a029 fdt: Add fdtgrep tool
This tool allows us to extract subsets of a device tree file. It is used by
the SPL vuild, which needs to cut down the device tree size for use in
limited memory.

This tool was originally written for libfdt but it has not been accepted
upstream, so for now, include it in U-Boot. Several utilfdt library
functions been included inline here.

If fdtgrep is eventually accepted in libfdt then we can bring that version
of libfdt in here, and drop fdtgrep (requiring that fdtgrep is provided by
the user).

If it is not accepted then another approach would be to write a special
tool for chopping down device tree files for SPL. While it would use the
same libfdt support, it would be less code than fdtgrep.c because it would
not have general-purpose functions.

Another approach (which was used with v1 of this series) is to sprinkler all
the device tree files with #ifdef. I don't like that idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:20 -06:00
Simon Glass
5b9d44df23 mkimage: Display a better list of available image types
Offer to display the available image types in help. Also, rather than
hacking the genimg_get_type_id() function to display a list of types,
do this in the tool. Also, sort the list.

The list of image types is quite long, and hard to discover. Print it out
when we show help information.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:20 -06:00
Stefano Babic
f448c5d320 Merge branch 'master' of git://git.denx.de/u-boot 2015-07-17 11:22:56 +02:00
Bin Meng
50e8a6bba0 tools: ifdtool: Write correct offset on 32-bit machine
On 32-bit machine strtol() returns LONG_MAX which is 0x7fffffff,
which is wrong for u-boot.rom components like u-boot-x86-16bit.bin.
Change to use strtoll() so that it works on both 32-bit and 64-bit
machines.

Reported-by: Fei Wang <wangfei.jimei@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:19 -06:00
Tom Rini
dd59211046 builderthread.py: Keep 'SPL'
On i.MX platforms the SPL binary is called "SPL" so make sure we keep
that.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Albert ARIBAUD \(3ADEV\)
699279cac0 tools: mkimage: fix imximage header size
imximage header size is 4-byte, not 8-byte aligned.
This produces .imx images that a Vybrid cannot boot
on.

Fix by adding a "padding" field in header.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-07-10 10:12:59 +02:00
Peter Robinson
0b367380a5 tools/env/fw_env.h: Correct include order
When building tools-only (or env) we need to be sure that we do use
<linux/kconfig.h> and do not use <generated/autoconf.h>.  This will fix
problems such as running 'make defconfig' or 'make sandbox_config' and
then 'make tools-only'.

Based on the responses below to the thread add linux/kconfig.h higher in
the includes and drop the now unneeded autoconf.h lower down to ensure
the default environment is included correctly

http://lists.denx.de/pipermail/u-boot/2015-June/216849.html

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2015-06-18 16:11:42 -04:00
Tom Rini
b48b69ba10 Merge git://git.denx.de/u-boot-marvell 2015-06-15 10:57:29 -04:00
Stefan Roese
1c0df9ef6e tools/kwboot: Add parameters to set delay and timeout via cmdline
To support the Armada 38x, new values for the request-delay and the
response-timeout are needed. As the values already implemented in
this tool (for Kirkwood and Armada XP) don't seem to work here.
To make this more flexible, lets add make those 2 parameters
configurable via the cmdline. Here the new parameters:

-q <req-delay>:  use specific request-delay
-s <resp-timeo>: use specific response-timeout

For the Marvell DB-88F6820 these values are known to work:

One board:
-q 2 -s 1

2nd board:
-q 5 -s 5

So this seems to be even board specific. But with this patch now
those values can be specified and tested via the cmdline.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-06-14 17:48:28 +02:00
Kevin Smith
a0aad12346 tools/kwbimage.c: Correct header size for SPI boot
If defined, the macro CONFIG_SYS_SPI_U_BOOT_OFFS allows a board
to specify the offset of the payload image into the kwb image
file.  This value was being used to locate the image, but was not
used in the "header size" field of the main header.  Move the
use of this macro into the function that returns the header size
so that the same value is used in all places.

Signed-off-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: Stefan Roese <sr@denx.de>
2015-06-14 17:48:28 +02:00
Masahiro Yamada
9d01b7872e kconfiglib: sync with the latest in Kconfiglib project
This commit imports some updates of kconfiglib.py from
https://github.com/ulfalizer/Kconfiglib

 - Warn about and ignore the "allnoconfig_y" Kconfig option
 - Statements in choices inherit menu/if deps
 - Add Symbol.is_allnoconfig_y()
 - Hint that modules are still supported despite warnings.
 - Add warning related to get_defconfig_filename().
 - Fix typo in docs.
 - Allow digits in $-references to symbols.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Philip Craig <philipjcraig@gmail.com>
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-12 12:43:06 -04:00
Bin Meng
6c4247e98e tools: ifdtool: Do not write region while its size is negative
We should ignore those regions whose size is negative. These are
typically optional and unused regions (like GbE and platform data).

Change-Id: I65ad01746144604a1dc0588b617af21f2722ebbf
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:02:57 -06:00
Daniel Kochmański
1f6f61fe4c sunxi/nand: change BLOCK_SIZE in mksunxiboot to match NAND block size
This change is necessary to calculate correct checksum for NAND
boot. Works both for MMC and NAND. Without it BROM rejects boot image
as invalid (bad checksum). (Changes block size from 0x200 to 0x2000).

Signed-off-by: Daniel Kochmański <dkochmanski@turtle-solutions.eu>
Signed-off-by: Roy Spliet <r.spliet@ultimaker.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29 13:46:36 +02:00
Thomas Petazzoni
4839836a12 tools: use pkg-config when available to get SSL flags
Instead of hardcoding -lssl -lcrypto as the flags needed to build
mkimage with FIT signature enabled, use pkg-config when
available. This allows to properly support cases where static linking
is used, which requires linking with -lz, since OpenSSL uses zlib
internally.

We gracefully fallback on the previous behavior of hardcoding -lssl
-lcrypto if pkg-config is not available or fails with an error.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-05-28 08:18:19 -04:00
Joe Hershberger
2e2ce6c0c8 moveconfig: Print status about the processed defconfigs
This gives a basic idea about progress.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:16 +09:00
Joe Hershberger
95bf9c7e34 moveconfig: Add a switch to enable printing errors
In some cases the build for the autoconf breaks. This outputs the errors
following the status so that action can be taken without building again
manually.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:16 +09:00
Joe Hershberger
25400090b1 moveconfig: Print a message for missing compiler
A common case for failed builds is a missing compiler. Print a message
for that case to tell the user concisely which compiler was expected
that was not found.

This patch also has the effect of not printing build errors any longer.
The next patch will add a switch to optionally bring that back.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:16 +09:00
Joe Hershberger
2559cd8961 moveconfig: Output a list of failed boards
If boards fail, output that list to a file so that it can easily be
passed back into moveconfig.py using the -d option.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:16 +09:00
Joe Hershberger
60727f5149 moveconfig: Cleanup headers in arch and board
Some config.h files live in arch and board directories. They will need
to be cleaned up as well, so run the same filters there.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:16 +09:00
Joe Hershberger
2144f88044 moveconfig: Add a switch to only cleanup headers
In some case you may want to only cleanup the headers. Make it possible
without waiting for all boards to compile.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:16 +09:00
Joe Hershberger
91040e8530 moveconfig: Add a parameter to accept a list to build
This is helpful to re-attempt to move failed boards from a previous run
without starting over.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:16 +09:00
Joe Hershberger
7740f653e6 moveconfig: Ignore duplicate configs when moving
When moving configs, it is important to know what was defined in the
config header even if it duplicates the configs coming from Kconfig.

This is specifically needed for the case where a config is set to
default 'y' in the Kconfig. This would previously cause the actual value
from the include config to be filtered out, and moveconfig.py would
think that it was 'n'... This means that the value that should be 'y'
is now (in every defconfig) set to 'not set'.

tools/moveconfig.py now defines KCONFIG_IGNORE_DUPLICATES to prevent the
filtering from happening and selecting wrong values for the defconfig.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:15 +09:00
Joe Hershberger
96464badc7 moveconfig: Always run savedefconfig on the moved config
This will ensure that the order of the defconfig entries will always
match that of the Kconfig files. After one slightly painful (but
still early in the process) pass over all boards, this should keep
the defconfigs clean from here on.

Users must edit the Kconfig first to add the menu entries and then run
moveconfig.py to update the defconfig files and the include configs.

As such, moveconfig.py cannot compare against the '.config' contents.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-27 08:39:15 +09:00
Masahiro Yamada
5a27c73433 tools: moveconfig: a tool to move CONFIGs from headers to defconfigs
This tool was originally written for my local use to ease the task
of tons of CONFIG moves, but there have been some requests for
mainlining it.
So, I have tidied up the code with nicer comments, and here it is.

See the comment block of the script for usage.

The first draft was
http://patchwork.ozlabs.org/patch/430422/

Main updates are:
  - Adapted to the single .config configuration
  - Support colored log
  - Support moving multiple options at once
    (and take configs via input file only)
  - Continue even if some boards fail
    (Idea provided by Joe Hershberger)
  - Add more options
  - More comments and code cleanups

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-27 08:39:15 +09:00
Jörg Krause
6121560d77 tools: mxsboot: Calculate ECC strength dynamically
Calculating the ECC strength dynamically to be aligned with the mxs NAND
driver and the Linux Kernel.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-24 14:26:54 -05:00
Jörg Krause
1fbdb70610 mtd: nand: mxs: Replace magic number for bits per ECC level with macro
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-05-24 14:26:54 -05:00
Fabio Estevam
d0285e0797 logos: Add Solidrun's logo
Let Solidrun's logo appear on Cuboxi and Hummingboard by default.

Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-05-15 19:20:47 +02:00
Jörg Krause
26e355d131 Fix musl build
This patch fixes cross-compiling U-Boot tools with the musl C library:
  * including <sys/types.h> is needed for ulong
  * defining _GNU_SOURCE is needed for loff_t

Tested for target at91sam9261ek_dataflash_cs3.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Tom Rini <trini@konsulko.com>
2015-05-08 17:24:17 -04:00
Max Krummenacher
1bfb9222ae fw_env.h: include autoconf.h
Without this, when CONFIG_ENV_VARS_UBOOT_CONFIG is active we get
a compile time error when doing 'make env'.
In file included from tools/env/fw_env.c:117:0:
include/env_default.h:110:11: error: expected ‘}’ before ‘CONFIG_SYS_ARCH’

When building U-Boot this is included indirectly by the compiler switch
-include
/home/trdx/git.toradex.com/u-boot-2014.10-toradex/include/linux/kconfig.h

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-05-05 19:52:07 -04:00
Wu, Josh
3871cd858f patman: check git format.subjectprefix setting when generate patches prefix
For the local project, we may specified format.subjectprefix setting.
Then the patch will be formated as [Project_prefix][PATCH].
But patman will not check this setting. It will remove the
format.subjectprefix.

So This patch will let patman check this setting and add it as a
project prefix.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-04-23 12:35:50 -06:00
Michal Simek
1246231c48 buildman: Add gcc 4.9.0 with Microblaze toolchain
Also read gcc 4.9.0 at kernel.org which also have Microblaze toolchain.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>

Fixed unit test failure by updating the test:
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23 12:31:54 -06:00
Wu, Josh
35ce2dc4d1 patman: cover letter shows like 00/xx if more than 10 patches
Make cover letter shows like 0/x, 00/xx and 000/xxx etc.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 16:24:25 -06:00
Tom Rini
f5e5ece0b7 buildman: Make -V (verbose_build) really be verbose
The help text for -V says we will pass V=1 but all it really did was not
pass in -s.  Change the logic to pass make V=1 with given to buildman -V or
-s to make otherwise.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 16:24:25 -06:00