Commit Graph

647 Commits

Author SHA1 Message Date
Simon Goldschmidt
65304aade8 lib: lmb: rename lmb_get_unreserved_size to lmb_get_free_size
As a follow-up, change the name of the newly introduced function
'lmb_get_unreserved_size' to 'lmb_get_free_size', which is more
appropriate.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Fix test/lib/lmb.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-26 08:13:57 -05:00
Chris Packham
67bb984249 net: remove CONFIG_MCAST_TFTP
No mainline board enables CONFIG_MCAST_TFTP and there have been
compilation issues with the code for some time. Additionally, it has a
potential buffer underrun issue (reported as a side note in
CVE-2018-18439).

Remove the multicast TFTP code but keep the driver API for the future
addition of IPv6.

Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-01-24 11:35:30 -06:00
Chris Packham
1a4af5c562 net: move ether_crc to tsec driver
ether_crc was added to the core net code in commit 53a5c424bf
("multicast tftp: RFC2090") so that other drivers could use it. However
the only current user of it is tsec.c so move it there.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-01-24 11:35:29 -06:00
Thomas RIENOESSL
a735e6e9d6 net: explicitly assign errno to return code in case of network failure
When dealing with two ethernet ports and having "netretry" set
to "once", it could occur that the connection (e.g. an ARP
request) failed, hence the status of the netloop was
"NETLOOP_FAIL". Due to the setting of "netretry", the network
logic would then switch to the other network interface,
assigning "ret" with the return value of "net_start_again()".
If this call succeeded we would return 0 (i.e. success) to
the caller when in reality the network action failed.

Signed-off-by: Thomas RIENOESSL <thomas.rienoessl@bachmann.info>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-01-24 11:35:28 -06:00
Simon Goldschmidt
a156c47e39 tftp: prevent overwriting reserved memory
This fixes CVE-2018-18439 ("insufficient boundary checks in network
image boot") by using lmb to check for a valid range to store
received blocks.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: Always build lib/lmb.o on LMB and lib/fdtdec.o on OF_LIBFDT]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-16 23:15:53 -05:00
Duncan Hare
5d457ecbef net: Consolidate UDP header functions
Make it possible to add TCP versions of the same, while reusing
IP portions. This patch should not change any behavior.

Signed-off-by: Duncan Hare <DH@Synoia.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-10-10 12:29:02 -05:00
Joe Hershberger
ac3f26cc15 net: Don't overwrite waiting packets with asynchronous replies
Peter originally sent a fix, but it breaks a number of other things.
This addresses the original reported issue in a different way.

That report was:

> U-Boot has 1 common buffer to send Ethernet frames, pointed to by
> net_tx_packet.  When sending to an IP address without knowing the MAC
> address, U-Boot makes an ARP request (using the arp_tx_packet buffer)
> to find out the MAC address of the IP addressr. When a matching ARP
> reply is received, U-Boot continues sending the frame stored in the
> net_tx_packet buffer.
>
> However, in the mean time, if U-Boot needs to send out any network
> packets (e.g. replying ping packets or ARP requests for its own IP
> address etc.), it will use the net_tx_packet buffer to prepare the
> new packet. Thus this buffer is no longer the original packet meant
> to be transmitted after the ARP reply. The original packet will be
> lost.

This instead uses the ARP tx buffer to send async replies in the case
where we are actively waiting for an ARP reply.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reported-by: Tran Tien Dat <peter.trantiendat@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:29:01 -05:00
Joe Hershberger
3f02c98bd1 net: Add an accessor to know if waiting for ARP
This single-sources the state of the ARP.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-10 12:28:58 -05:00
Jean-Jacques Hiblot
c3211708cf net: eth-uclass: Fix for DM USB ethernet support
When a USB ethernet device is halted, the device driver is removed. When
this happens the uclass private memory is freed and uclass_priv is set to
NULL. This causes a data abort when uclass_priv->state is then set to
ETH_STATE_PASSIVE.

Fix it by checking if uclass_priv is NULL before setting uclass_priv->state

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-08-21 16:21:37 +02:00
Joe Hershberger
6ab1283092 net: Consolidate the parsing of bootfile
The same basic parsing was implemented in tftp and nfs, so add a helper
function to do the work once.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:20 -05:00
Joe Hershberger
f43308fa0c net: Read bootfile from env on netboot_common()
Instead of depending on a env callback for bootfile, read it explicitly.

We do this because the bootfile can be specified on the command line and
if it is, we will overwrite the internal variable. If a netboot_common()
is called again with no bootfile parameter, we want to use the one in
the environment.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:20 -05:00
Joe Hershberger
16cf145fd6 net: Make copy_filename() accept NULL src
Rather than crashing, check the src ptr and set dst to empty string.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:20 -05:00
Joe Hershberger
3855cad623 net: Re-check prerequisites when autoloading
With net autoload, we check the prerequisites for the initial command,
but the greater prerequisites when autoloading are not checked.

If we would attempt to autoload, check those prerequisites too.

If we are not expecting a serverip from the server, then don't worry
about it not being set, but don't attempt to load if it isn't.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:20 -05:00
Joe Hershberger
3a66fcb7c3 net: When checking prerequisites, consider boot_file_name
For net_boot_common, we allow the serverip to be specified as part of
the boot file name. For net commands that require serverip, include that
source as a valid specification of serverip.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-07-26 14:08:19 -05:00
Joe Hershberger
faecf84ab1 net: Always print basic info for nfs, just like tftp
nfs was only printing basic info about the transfer in the case of a
DEBUG build. Print the same level of detail as tftp always.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:19 -05:00
Joe Hershberger
347e32b01d net: Check subnet against the actual ip address in use for nfs
The check for sending to the gateway was not using the correct variable
for comparison, so it was reporting that packets are sent to the gateway
when they were not.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:19 -05:00
Joe Hershberger
2d114b83a7 net: Correct size of NFS buffers
Reported-by: Coverity (CID: 152888)
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-26 14:08:19 -05:00
Joe Hershberger
68acb51f44 net: Only call halt on a driver that has been init'ed
With driver model, we were not checking if the state of the device was
marked as active before calling the halt function. Check that the device
is probed and also marked as active. This avoids the case where we were
calling halt on the first device in net_init() and the driver would
operate on bogus data structures causing problems. In this case, the
priv was all 0, so halt() would close STDIN.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26 14:08:17 -05:00
Alexander Graf
bdce340cc6 net: Add option to prefer bootp/dhcp serverip
Currently we can choose between 2 different types of behavior for the
serverip variable:

  1) Always overwrite it with the DHCP server IP address (default)
  2) Ignore what the DHCP server says (CONFIG_BOOTP_SERVERIP)

This patch adds a 3rd option:

  3) Use serverip from DHCP if no serverip is given
     (CONFIG_BOOTP_PREFER_SERVERIP)

With this new option, we can have the default case that a boot file gets
loaded from the DHCP provided TFTP server work while allowing users to
specify their own serverip variable to explicitly use a different tftp
server.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-02 14:14:21 -05:00
Alexander Graf
449312c1c0 net: Prefer command line arguments
We can call commands like dhcp and bootp without arguments or with
explicit command line arguments that really should tell the code where
to look for files instead.

Unfortunately, the current code simply overwrites command line arguments
in the dhcp case with dhcp values.

This patch allows the code to preserve the command line values if they
were set on the command line. That way the semantics are slightly more
intuitive.

The reason this patch does that by introducing a new variable is that we
can not rely on net_boot_file_name[0] being unset, as today it's
completely legal to call "dhcp" and afterwards run "tftp" and expect the
latter to repeat the same query as before. I would prefer not to break
that behavior in case anyone relies on it.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-02 14:14:20 -05:00
Lothar Felten
d8970dae27 net: Add new wol command - Wake on LAN
Add a new command 'wol': Wait for an incoming Wake-on-LAN packet or
time out if no WoL packed is received.
If the WoL packet contains a password, it is saved in the environment
variable 'wolpassword' using the etherwake format (dot or colon
separated decimals).

Intended use case: a networked device should boot an alternate image.
It's attached to a network on a client site, modifying the DHCP server
configuration or setup of a tftp server is not allowed.
After power on the device waits a few seconds for a WoL packet. If a
packet is received, the device boots the alternate image. Otherwise
it boots the default image.

This method is a simple way to interact with a system via network even
if only the MAC address is known. Tools to send WoL packets are
available on all common platforms.

Some Ethernet drivers seem to pad the incoming packet. The additional
padding bytes might be recognized as Wake-on-LAN password bytes.

By default enabled in pengwyn_defconfig.

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-02 14:14:20 -05:00
Alex Kiernan
6dc73df73b net: fastboot: Fix build when FASTBOOT_FLASH is disabled
When building without FASTBOOT_FLASH we don't include the intermediate
update callback to keep the client alive, so ensure we don't try setting
it here.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-02 14:14:20 -05:00
Vasily Khoruzhick
d48d40a091 net: nfs: don't fail when nfs_read_reply returns -NFS_RPC_DROP
That can happen if duplicate UDP packet arrived, and that's not uncommon.
Anyway, we ignore packets with rpc_id lower than last we sent for other
requests, so it makes sense to do that for read request as well.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-13 13:54:16 -05:00
Leonid Iziumtsev
60177b2617 net: Protect net_state from reentrant net_loop()
Global variable "net_state" is used in net_loop() state-machine.
But it happens that some times the net_loop() can be called
multiple times in the same call stack. For example when the
netconsole is enabled and we print the message while some other
net protocol is in action. Netconsole will overwrite the "net_state"
and that will break the logic for earlier started protocol.

To protect the state save and restore "net_state" variable each
time when we enter and exit net_loop().

Signed-off-by: Leonid Iziumtsev <leonid.iziumtsev@se.atlascopco.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-13 13:54:16 -05:00
Mario Six
3ce4304205 net: Initialize as many ethernet devices as possible
On devices that have their first network interface provided by a FPGA,
the initialization of further interfaces will fail if the FPGA is not
yet programmed. This leads to problems during factory setup when the
data is supposed to be loaded over secondary netowork interfaces.

To avoid this, use the uclass_{first,next}_device_check functions to
initialize as many ethernet devices as possible.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-13 13:54:15 -05:00
Mario Six
2d8f25ed7b net: Always align tx packets
Make sure that TX packets are always cache-aligned.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-06-13 13:54:15 -05:00
Alex Kiernan
f73a7df984 net: fastboot: Merge AOSP UDP fastboot
Merge UDP fastboot support from AOSP:

  https://android.googlesource.com/platform/external/u-boot/+/android-o-mr1-iot-preview-8

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Alex Deymo <deymo@google.com>
Signed-off-by: Jocelyn Bohr <bohr@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30 11:59:21 +02:00
Chris Packham
4b4dc5211e net: bootp: Fix compile error processing ntpserver option
When the following configuration is set

  # CONFIG_CMD_DHCP is not set
  CONFIG_CMD_BOOTP=y
  CONFIG_BOOTP_NTPSERVER=y

The following compile error is observed

  error: used struct type value where scalar is required
    if (net_ntp_server)
        ^~~~~~~~~~~~~~

Resolve this by checking net_ntp_server.s_addr instead.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-05-14 21:28:38 -04:00
Tom Rini
f739fcd831 SPDX: Convert a few files that were missed before
As part of the main conversion a few files were missed.  These files had
additional whitespace after the '*' and before the SPDX tag and my
previous regex was too strict.  This time I did a grep for all SPDX tags
and then filtered out anything that matched the correct styles.

Fixes: 83d290c56f ("SPDX: Convert all of our single license tags to Linux Kernel style")
Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-10 20:38:35 -04:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Joe Hershberger
5f967c0493 net: Make core net code depend on NET instead of CMD_NET
No commands are necessary to have a network stack.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:48:30 -05:00
Joe Hershberger
92fa44d58f net: Move net command options to the cmd menu
Options that controlled the tftp and bootp commands depended on their
commands, but lived in the net menu.

Move them so they are in a consistent location.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
2018-04-13 15:48:05 -05:00
Joe Hershberger
d7a45eafda net: Make CMD_NET a menuconfig
Previously, CMD_NET was an alias for 2 commands (bootp and tftpboot) and
they we not able to be disabled. Separate out those 2 commands and move
CMD_NET up to the menu level, which more accurately represents the code.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Duncan Hare <dh@synoia.com>
2018-04-13 15:47:57 -05:00
Alex Kiernan
9925f1dbc3 net: Move enetaddr env access code to env config instead of net config
In order that we can use eth_env_* even when CONFIG_NET isn't set, move
these functions to environment code from net code.

This fixes failures such as:

  board/ti/am335x/built-in.o: In function `board_late_init':
  board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr'
  u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr'

which caters for use cases such as:

commit f411b5cca4 ("board: am335x: Always set eth/eth1addr environment
variable")

when Ethernet is required in Linux, but not U-Boot.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-08 23:00:58 -04:00
Alexander Graf
a532e2f2e5 net: Only access network devices after init
In the efi_loader main loop we call eth_rx() occasionally. This rx function
might end up calling into devices that haven't been initialized yet,
potentially resulting in a lot of transfer timeouts.

Instead, let's make sure the ethernet device is actually initialized before
reading from or writing to it.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:31 -05:00
Leonid Iziumtsev
17d413b253 net: Fix netretry condition
The "net_try_count" counter starts from "1".
And the "retrycnt" contains requested amount of retries.

With current logic, that means that the actual retry amount
will be one time less then what we set in "netretry" env.
For example setting "netretry" to "once" will make "retrycnt"
equal "1", so no retries will be triggered at all.

Fix the logic by changing the statement of "if" condition.

Signed-off-by: Leonid Iziumtsev <leonid.iziumtsev@se.atlascopco.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:31 -05:00
Michal Simek
3b3ea2c56e Kconfig: cmd: Make networking command dependent on NET
Enable networking command only when NET is enabled.
And remove selecting NET for CMD_NET

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-27 16:25:30 -05:00
Adam Ford
d021e94210 Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTP_BOOTPATH
   CONFIG_BOOTP_DNS
   CONFIG_BOOTP_GATEWAY
   CONFIG_BOOTP_HOSTNAME
   CONFIG_BOOTP_PXE
   CONFIG_BOOTP_SUBNETMASK
   CONFIG_CMDLINE_EDITING
   CONFIG_AUTO_COMPLETE
   CONFIG_SYS_LONGHELP
   CONFIG_SUPPORT_RAW_INITRD
   CONFIG_ENV_VARS_UBOOT_CONFIG

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Re-run the migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-23 21:41:49 -05:00
Adam Ford
a5a37567c4 Convert CONFIG LIB_HW_RAND to Kconfig
config_fallbacks.h had some logic to automatically select
LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't
already selected.  By migrating LIB_HW_RAND to Kconfig, we can
remove this check from config_fallbacks.h and put it into Kconfig

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
[trini: Turn into a choice, add NET_RANDOM_ETHADDR]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08 12:48:22 -05:00
Joe Hershberger
2099b9f27c net: dhcp: Allow "MAY_FAIL" to still try each adapter
This change allows the "MAY_FAIL" DHCP option to still attempt to
contact a DHCP server on each adapter and only give up once each
adapter has failed once.  To get the existing behavior, set the
already-existing ethrotate=no variable.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Keng Soon Cheah <keng.soon.cheah@ni.com>
Cc: Chen Yee Chew <chen.yee.chew@ni.com>
2018-01-15 12:05:23 -06:00
Joe Hershberger
765a159cf5 net: Remove nfs.h include from bootp.c
Nothing from this header is used there, so remove it.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-01-15 12:05:15 -06:00
Jörg Krause
64b8d7a677 net/tftp: fix build if CMD_BOOTEFI is not set
Fixes:
net/tftp.c:811: undefined reference to `efi_set_bootdev'

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-22 07:40:05 -04:00
Tom Rini
0b1e580672 net: nfs: Drop CONFIG_NFS_READ_SIZE
In the general case, CONFIG_NFS_READ_SIZE is unchanged from the default
of 1024.  There are in fact no in-tree users that increase this size.
Adjust the comment to reflect what could be done in the future in
conjunction with CONFIG_IP_DEFRAG.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-09-07 13:23:52 -05:00
Simon Glass
723806cc5b env: Rename some other getenv()-related functions
We are now using an env_ prefix for environment functions. Rename these
other functions as well, for consistency:

   getenv_vlan()
   getenv_bootm_size()
   getenv_bootm_low()
   getenv_bootm_mapsize()
   env_get_default()

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:31:11 -04:00
Simon Glass
35affd7a2f env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()
Rename this function for consistency with env_get().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:44 -04:00
Simon Glass
bfebc8c965 env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()
We are now using an env_ prefix for environment functions. Rename these
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:32 -04:00
Simon Glass
00caae6d47 env: Rename getenv/_f() to env_get()
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:24 -04:00
Simon Glass
fd1e959e91 env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()
Rename this function for consistency with env_set().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:23:56 -04:00
Simon Glass
018f530323 env: Rename common functions related to setenv()
We are now using an env_ prefix for environment functions. Rename these
commonly used functions, for consistency. Also add function comments in
common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:23:32 -04:00