Commit Graph

39119 Commits

Author SHA1 Message Date
Sandy Patterson
2918d96728 rockchip: rockchip, sdram-channel 0xff fix remaining dts
Add an extra byte so that this data is not byteswapped.

Signed-off-by: Sandy Patterson <apatterson@sightlogix.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-08-05 17:56:07 -06:00
Xu Ziyuan
d2d763fa83 rockchip: add fastboot support for rk3036 board
Enable fastboot feature on rk3036, please refer to doc/README.rockchip
for more detailed usage.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 17:56:07 -06:00
Jaehoon Chung
89f69e5173 mmc: sdhci: fix the compiler warning when disable CONFIG_MMC_SDMA
When disabled CONFIG_MMC_SDMA, variable caps didn't use.
This patch fixes the compiler error for -Wunused-but-set-variable

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 20:48:01 +09:00
Tom Rini
7d106242d3 omap3, omap4: Enable USE_TINY_PRINTF for all
In the case of omap3 we have a number of platforms that are close to
exceeding SRAM limits, depending on compiler.  Move to USE_TINY_PRINTF
to give them more room.  OMAP4 will soon enough be in a similar place,
so enable that now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:29 -04:00
Tom Rini
a2ea62e826 omap3: Move to select SUPPORT_SPL for all
In reality all omap3 platforms support SPL so move the select for this
up a level.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:29 -04:00
Max Filippov
e379508435 cmd/bdinfo: extract print_std_bdinfo
print_std_bdinfo outputs typical set of board information entries:
boot params location, memory and flash addresses and sizes, network
interfaces information and configured serial baud rate.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 07:27:28 -04:00
Max Filippov
4e3fa7d8a1 cmd/bdinfo: extract print_baudrate
print_baudrate outputs serial baud rate.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 07:27:28 -04:00
Max Filippov
8752e260c4 cmd/bdinfo: extract print_eth_ip_addr
print_eth_ip_addr outputs eth configurations for up to 6 interfaces and
configured IP address.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-08-05 07:27:27 -04:00
Max Filippov
f80e535980 cmd/bdinfo: extract print_bi_flash
print_bi_flash outputs flashstart, flashsize and flashoffset lines.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 07:27:26 -04:00
Max Filippov
fd60e99f55 cmd/bdinfo: extract print_bi_dram
print_bi_dram outputs start address and size for each DRAM bank.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 07:27:26 -04:00
Max Filippov
12feb3647e cmd/bdinfo: extract print_bi_mem
print_bi_mem outputs memstart and memsize lines.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 07:27:26 -04:00
Max Filippov
171e53968c cmd/bdinfo: extract print_bi_boot_params
print_bi_boot_params outputs boot parameters structure location.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 07:27:25 -04:00
Masahiro Yamada
bb6b142fc1 treewide: move CONFIG_PHYS_64BIT to Kconfig
We need to ensure that CONFIG_PHYS_64BIT is configured via Kconfig so
that it is always available to the build system.  Otherwise we can run
into cases where we have inconsistent sizes of certain attributes.

Ravi Babu reported offset mismatch of struct dwc3 across files since
commit 95ebc253e6 ("types.h: move and redefine resource_size_t").
Since the commit, resource_addr_t points to phys_addr_t, whose size
is dependent on CONFIG_PHYS_64BIT for ARM architecture.

I tried my best to use "select" where possible (for example, ARMv8
architecture) because I think this kind of option is generally user-
unconfigurable.  However, I see some of PowerPC boards have 36BIT
defconfigs as well as 32BIT ones.  I moved CONFIG_PHYS_64BIT to the
defconfigs for such boards.

CONFIG_36BIT is no longer referenced, so all of the defines were
removed from CONFIG_SYS_EXTRA_OPTIONS.

Fixes: 95ebc253e6 ("types.h: move and redefine resource_size_t")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Ravi Babu <ravibabu@ti.com>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-08-05 07:27:25 -04:00
Masahiro Yamada
9ab0296a82 tools: moveconfig: support CONFIG_SYS_EXTRA_OPTIONS cleaning
We mostly move config options from board header files to Kconfig,
but sometimes config defines come from CONFIG_SYS_EXTRA_OPTIONS.

Historically, CONFIG_SYS_EXTRA_OPTIONS originates in boards.cfg,
which was used as a central database of configuration prior to the
Kconfig conversion.

Now, we want to migrate to primary entries in Kconfig rather than
option list in CONFIG_SYS_EXTRA_OPTIONS, so it should be helpful to
have the tool to cleanup CONFIG_SYS_EXTRA_OPTIONS automatically.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:18 -04:00
Masahiro Yamada
684c306ec4 tools: moveconfig: make getting all defconfigs into helper function
I want to reuse this routine in the next commit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:17 -04:00
Masahiro Yamada
a3a779f7f7 tools: moveconfig: fix cleanup of defines across multiple lines
Correct the clean-up of such defines that continue across multiple
lines, like follows:

  #define CONFIG_FOO "this continues to the next line " \
          "this line should be removed too" \
          "this line should be removed as well"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:17 -04:00
Masahiro Yamada
e9ea122159 tools: moveconfig: show diffs of cleaned headers in color
Show code diff in color if --color option is given.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:16 -04:00
Masahiro Yamada
f2f6981a14 tools: moveconfig: show result of header cleaning in unified diff
The header cleanup feature of this tool now removes empty ifdef's,
successive blank lines as well as moved option defines.  So, we
want to see a little more context to check which lines were deleted.

It is true that we can see it by "git diff", but it would not work
in the --dry-run mode.  So, here, this commit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-05 07:27:16 -04:00
Masahiro Yamada
8ba1f5de45 tools: moveconfig: trim garbage lines after header cleanups
The tools/moveconfig.py has a feature to cleanup #define/#undef's
of moved config options, but I want this tool to do a better job.

For example, when we are moving CONFIG_FOO and its define is
surrounded by #ifdef ... #endif, like follows:

  #ifdef CONFIG_BAR
  #  define CONFIG_FOO
  #endif

The header cleanup will leave empty #ifdef ... #endif:

  #ifdef CONFIG_BAR
  #endif

Likewise, if a define line between two blank lines

  <blank line>
  #define CONFIG_FOO
  <blank lines.

... is deleted, the result of the clean-up will be successive empty
lines, which is a coding-style violation.

It is tedious to remove left-over garbage lines manually, so I want
the tool to take care of this.  The tool's job is still not perfect,
so we should check the output of the tool, but I hope our life will
be much easier with this patch.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-05 07:27:16 -04:00
Masahiro Yamada
f7536f798d tools: moveconfig: do not check clean tree and compilers for -H option
The clean tree (make mrproper) and compilers are required when moving
config options, but not needed when we only cleanup headers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:15 -04:00
Masahiro Yamada
dc6de50bd6 tools: moveconfig: do not cleanup headers in include/generated
The files in include/generated are generated during build and removed
by "make mrproper", so it has no point to touch them by this tool.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:15 -04:00
Tom Rini
6f94ab6656 ext4: Refuse to mount filesystems with 64bit feature set
With e2fsprogs after 1.43 the 64bit and metadata_csum features are
enabled by default.  The metadata_csum feature changes how
ext4_group_desc->bg_checksum is calculated, which would break write
support.  The 64bit feature however introduces changes such that it
cannot be read by implementations that do not support it.  Since we do
not support this, we must not mount it.

Cc: Stephen Warren <swarren@nvidia.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stefan Roese <sr@denx.de>
Reported-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:27:14 -04:00
Tom Rini
a78cd86132 ARM: Rework and correct barrier definitions
As part of testing booting Linux kernels on Rockchip devices, it was
discovered by Ziyuan Xu and Sandy Patterson that we had multiple and for
some cases incomplete isb definitions.  This was causing a failure to
boot of the Linux kernel.

In order to solve this problem as well as cover any corner cases that we
may also have had a number of changes are made in order to consolidate
things.  First, <asm/barriers.h> now becomes the source of isb/dsb/dmb
definitions.  This however introduces another complexity.  Due to
needing to build SPL for 32bit tegra with -march=armv4 we need to borrow
the __LINUX_ARM_ARCH__ logic from the Linux Kernel in a more complete
form.  Move this from arch/arm/lib/Makefile to arch/arm/Makefile and add
a comment about it.  Now that we can always know what the target CPU is
capable off we can get always do the correct thing for the barrier.  The
final part of this is that need to be consistent everywhere and call
isb()/dsb()/dmb() and NOT call ISB/DSB/DMB in some cases and the
function names in others.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Sandy Patterson <apatterson@sightlogix.com>
Reported-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Reported-by: Sandy Patterson <apatterson@sightlogix.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-05 07:23:57 -04:00
Alexey Brodkin
65fcba1251 arc: Rename AXS101 board to more generic AXS10x
As of now we have 2 flavors of ARC SDP boards:
 1) AXS101 - with ARC770 in ASIC
 2) AXS103 - with ARC HS38 in FPGA

Both options share exactly the same base-board and only differ with
CPU-tiles in use. That means all peripherals are the same (they are
implemented in FPGA on the base-board) and so generic board could be
used for both.

While at it:
 * Recreated defconfigs with savedefconfig
 * In include/configs/axs10x.h numerical sizes replaced with
defines from linux/sizes.h for better readability.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05 12:50:33 +03:00
Alexey Brodkin
cc8be222d1 arc: Rename ARCangel4 board to nSIM
ARCangel was one of the main development boards back in the day but
now it's gone and replaced by other boards like ARC SDP.

But we also used to have simulation platform very similar to ARCangel4
in terms of CPU settings as well as basic IO like UART. Even though
ARCangel4 is long gone now we have a replacement for simulation which is
a plain or stand-alone nSIM and Free nSIM.

Note Free nSIM is available for download here:
https://www.synopsys.com/cgi-bin/dwarcnsim/req1.cgi

And while at it:
 * Finally switch hex numerical values in nsim.h to defines from
   include/linux/sizes.h
 * Add defconfigs with ARC HS38 cores
 * Recreated all defconfigs with savedefconfig

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-05 12:50:25 +03:00
Alexey Brodkin
9bef24d0de arc: No need in sections defined in sources with newer tools
Starting from arc-2016.03 GNU tools linker properly works with
symbols defined in linker script and so external declarations
are no longer required, dump them.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-05 12:50:25 +03:00
Alexey Brodkin
699c4e592b arc: Update exception & interrupt handling for ARCv2
Initially IVT for ARCv2 was simply copypasted from ARCompact
with some selected fixes so basic stuff works.

Now we update it with more ARCv2 specific vectors like
 * Software Interrupt
 * Division by zero
 * Data cache consistency error
 * Misaligned access

Also normal interrupts are now implemented properly and extened to
all possible 240 items.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-05 12:50:25 +03:00
Alexey Brodkin
ffffcd1594 arc: Add debug messages during relocation fixups
This might be useful to make sure relocation fixups really
happen. And since this info gets printed only in DEBUG
build it doesn't really hurt normal execution.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-05 12:50:25 +03:00
Jaehoon Chung
4587f53a58 mmc: dw_mmc: fix the wrong Mask bit boundary for fifo_count bit
According to DesignWare TRM, FIFO_COUNT is bit[29:17].
If get the correct fifo_count value, it has to  use the FIFO_MASK
as 0x1FFF, not 0x1FF.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Ziyuan Xu <xzy.xu@rock-chips.com>
2016-08-05 14:04:46 +09:00
Xu Ziyuan
720724d098 mmc: dw_mmc: fix data starvation by host timeout under FIFO mode
This patch fixes data starvation by host timeout(HTO) error interrupt
which occurred under FIFO mode transfer on rk3036 board.

The former implement, the actual bytes were transmitted may be less than
should be. The size will still subtract value of len in case of there is
no receive/transmit FIFO data request interrupt.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 14:04:36 +09:00
Xu Ziyuan
2990e07a33 mmc: dw_mmc: transfer proper bytes to FIFO
The former implement, dw_mmc will push and pop the redundant data to
FIFO, we should transfer it according to the real size.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 14:04:31 +09:00
Jaehoon Chung
14bed52d27 mmc: sdhci: remove the unnecessary arguments for sdhci_setup_cfg
Some arguments don't need to pass to sdhci_setup_cfg.
Generic variable can be used in sdhci_setup_cfg, and some arguments are
already included in sdhci_host struct.

It's enough that just pass the board specific things to sdhci_setup_cfg().
After removing the unnecessary arguments, it's more simpler than before.
It doesn't consider "Version" and "Capabilities" anymore in each SoC
driver.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:31:07 +09:00
Jaehoon Chung
6a879ec8e7 mmc: sdhci: remove the unused argument for sdhci_setup_cfg
buswidth isn't used anywhere in sdhci_setup_cfg.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
e1ea7c44d6 mmc: sdhci: revert "mmc: sdhci: Claer high speed if not supported"
This "commit 429790026021d522d51617217d4b86218cca5750" is wrong.
SDHCI_QUIRK_NO_HISPD_BIT is for skipping to set CTRL_HISPD bit.

For example, Exynos didn't have CTRL_HISPD. But Highspeed mode
is supported.
(This quirks doesn't mean  that driver didn't support the Highseepd mode.)

Note: If driver didn't support the Highspeed Mode, use or add the other
quirks.

After applied this patch, all Exynos SoCs are just running with 25MHz.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 11:21:25 +09:00
Xu Ziyuan
1bd4f92cdb mmc: display mmc list information like mmc_legacy type
It's nicer to see this:

=> mmc list
dwmmc@ff0c0000: 0
dwmmc@ff0f0000: 1 (eMMC)

than this:

=> mmc list
dwmmc@ff0c0000: 0dwmmc@ff0f0000: 1 (eMMC)

With the former, it's much clearer which mmc devices are on.

Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
915ffa5213 mmc: use the generic error number
Use the generic error number instead of specific error number.
If use the generic error number, it can debug more easier.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
70f862808e mmc: fsl_esdhc: remove the duplicated header file
"mmc.h" is already included. It's duplicated.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:21:25 +09:00
Jaehoon Chung
ccd60a8524 mmc: dw_mmc: remove the duplicated header file
<asm-generic/errno.h> is already included in <errno.h>.
It can use <errno.h> instead of <asm-generic/errno.h>

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-05 11:21:24 +09:00
Jaehoon Chung
a034ec06ff mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B
Unset the SDHCI_QUIRK_BROKEN_R1B for exynos SoC.
(Tested on Exynos4 Boards.)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2016-08-05 11:21:24 +09:00
Jaehoon Chung
17ea3c8628 mmc: sdhci: set to INT_DATA_END when there are data
There is no data, it doesn't needs to wait for completing data transfer.
(It seems that it can be removed.)
Almost all timeout error is occured from stop command without data.
After applied this patch, I hope that we don't need to increase timeout value anymore.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2016-08-05 11:21:24 +09:00
Masahiro Yamada
bae4a1fdf5 mmc: sdhci: clean up timeout detection
The current timeout detection logic is not very nice; it calls
get_timer(start) in the while() loop, and then calls it again after
the loop to check if a timeout error happened.

Because of the time difference between the two calls of get_timer(),
the timeout detected after the loop may not be true.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-08-05 11:21:24 +09:00
Stephen Warren
cb0ff4ccc0 ARM: tegra: call tegra_board_init on Tegra186
Introduce tegra_board_init() and call it from board_init(). Tegra wil use
tegra_board_init() for board-specific initialization, and board_init() for
SoC-specific initialization.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Bryan Wu
9e613de0e1 ARM: tegra: add I2C controllers to Tegra186 DT
Tegra186 has 8 I2C controllers including BPMP I2C. This patch adds the
other 7 generic controllers to Tegra186's DT.

Signed-off-by: Bryan Wu <pengw@nvidia.com>
(swarren, fixed DT node sort order, tweak patch description)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
20bbde0628 ARM: tegra: add PCIe controller to Tegra186 SoC DT
The Tegra186 PCIe DT content is almost identical to previous chips, except
that the:

- There are 3 ports instead of 2.
- Some physical addresses have moved.
- PHY programming is handled by firmware, so CCPLEX DTs don't need to
  reference any PHY.
- The power domain is explicitly represented in DT. This change is
  mandatory for Tegra186 since standard power domain APIs are used, and
  should be made to the DT for older SoCs, although we get away without
  doing so since U-Boot currently uses custom APIs that hard-code power
  domain IDs.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
23ab5bda7e ARM: tegra: add BPMP I2C to Tegra186 device tree
This allows the BPMP I2C device to be instantiated, which makes it
available to other drivers and the user.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
19014203c4 ARM: tegra: add BPMP and dependencies to Tegra186 DT
This adds the DT content that's needed to allow board DTs to enable use
of BPMP, clocks, resets, GPIOs, eMMC, and SD cards.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
6e7a11e64e dt-bindings: add Tegra186 BPMP I2C binding
In Tegra186, the BPMP (Boot and Power Management Processor) owns certain
HW devices, such as the I2C controller for the power management I2C bus.
Software running on other CPUs must perform IPC to the BPMP in order to
execute transactions on that I2C bus. This binding describes an I2C bus
that is accessed in such a fashion.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
390ae57c76 dt-bindings: allow child nodes inside the Tegra BPMP
The BPMP implements some services which must be represented by separate
nodes. For example, it can provide access to certain I2C controllers, and
the I2C bindings represent each I2C controller as a device tree node.
Update the binding to describe how the BPMP supports this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
7b9cb49405 ARM: tegra: add BPMP DT bindings
The Tegra BPMP (Boot and Power Management Processor) is a separate
auxiliary CPU embedded into Tegra to perform power management work, and
controls related features such as clocks, resets, power domains, PMIC I2C
bus, etc. These bindings dictate how to represent the BPMP in device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:58 -07:00
Stephen Warren
729c2db7a9 ARM: tegra: adapt to latest HSP DT binding
The DT binding for the Tegra186 HSP module apparently wasn't quite final
when I posted initial U-Boot support for it. Add the final DT binding doc
and adapt all code and DT files to match it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:58 -07:00