Commit Graph

13 Commits

Author SHA1 Message Date
Krzysztof Kozlowski
e3ee4be321 arm: exynos: Detect revision later, when all resources are ready
Detection of board revision is done early - before power setup.  In case of
Odroid XU3/XU4/HC1 family, the detection is done using ADC which
is supplied by LDO4/VDD_ADC regulator.  This regulator could be turned
off (e.g. by kernel before reboot).  If ADC is used early, the
regulators are not yet available and the detection won't work.

Split the revision detection out of set_board_type() into separate
function called later - either when displaying board info (in late mode)
or during misc_init_r.  The idea is that set_board_type() will be called
early so its method of detection are limited to flattened device tree
(exynos5-dt-types.c for Exynos5) or GPIO (odroid.c for Exynos4412).  The
newly added set_board_revision() can be called only later, when
resources like regulator are available.

This is necessary to fix the detection of Odroid HC1 after reboot, if
kernel turned off the LDO4 regulator.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11 15:53:19 +09:00
Simon Glass
a42ff927a7 exynos: Drop duplicate 'model' line
At present the model is shown twice, once in the generic code and once
in the exynos code. Drop the latter.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-09 12:50:21 -07:00
Dirk Meul
9cd97c5b04 ARM: Samsung: Add Exynos5422-based Odroid HC2 support
Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1.

The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used
for the Odroid HC2.

Resend because MUA changed whitespace.

Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-10-23 20:00:52 +09:00
Marek Szyprowski
7090ead3f2 ARM: Samsung: Add Exynos5422-based Odroid HC1 support
Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO
button. USB3.0 ports are used for build-in JMicron USB to SATA bridge
and Gigabit R8152 ethernet chips. HC1 uses only passive cooling.

This patch also updates Odroid's ADCmax array and reduces ADC tolerance
to 1% to ensure that XU4 and HC1 revisions are properly detected.

I've tested this with XU3, XU3-lite, XU4 and HC1 boards. In case of my test
boards I got following values from ADC register: 372, 370, 1281 and 1313.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-12-05 10:18:39 +09:00
Przemyslaw Marczak
1611c8cbcf exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.
This commit adds additional file with implementation of board
detection code for Odroid-XU3/XU4.

The detection depends on compatible found in fdt:
- "samsung,exynos5" - uses Exynos5 generic code
- "samsung,odroidxu3" - try detect XU3 revision

There are few revisions of Odroid XU3/XU4, each can be detected
by checking the value of channel 9 of built-in ADC:
 Rev   ADC  Board
 0.1     0  XU3 0.1
 0.2   372  XU3 0.2 | XU3L - no DISPLAYPORT
 0.3  1280  XU4 0.1

The detection code depends on the ADC+10% value.

Implementation of functions:
- set_board_type()     - read ADC and set type
- get_board_rev()      - returns board revision: 1..3
- get_board_type()     - returns board type string

Additional functions with return values of bool:
- board_is_generic()   - true if found compatible "samsung,exynos5"
                         but not "samsung,odroidxu3"
- board_is_odroidxu3() - true if found compatible "samsung,odroidxu3"
                         and one of XU3 revision.
- board_is_odroidxu4() - true if found compatible "samsung,odroidxu3"
                         and XU4 revision.

After I2C controller init, the get_board_type() can check
if the XU3 board is a "Lite" variant, by probing chip
0x40 on I2C0 (INA231 - exists only on non-lite).
This is useful for setting fdt file name at misc_init_r().

Enabled configs:
- CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- CONFIG_ODROID_REV_AIN
- CONFIG_REVISION_TAG
- CONFIG_BOARD_TYPES

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00
Przemyslaw Marczak
899a528215 dfu: samsung: move call to set_dfu_alt_info() to dfu common code
This common call can be used for setting proper entities based
on dfu command arguments.
The config: CONFIG_SET_DFU_ALT_INFO, was used only for few configs,
and now it is common.

The board file should implement:
- set_dfu_alt_info() function

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[Test HW: Odroid U3 (Exynos 4412)]
2015-02-25 17:47:02 +01:00
Przemyslaw Marczak
d50c41efcd samsung: board: enable support of multiple board types
This change adds declaration of functions:
- set_board_type() - called at board_early_init_f()
- get_board_type() - called at checkboard()

For supporting multiple board types in a one config - it is welcome
to display the current board model. This is what get_board_type()
should return.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 13:58:50 +09:00
Przemyslaw Marczak
1d07c1013c samsung: misc: add function for setting $dfu_alt_info
This change introduces new common function:
- set_dfu_alt_info() - put dfu system and bootloader setting
                       into $dfu_alt_info.
functions declaration:
- char *get_dfu_alt_system(void)
- char *get_dfu_alt_boot(void)
- void set_dfu_alt_info(void)
and new config:
- CONFIG_SET_DFU_ALT_INFO

This function can be used for auto setting dfu configuration on boot.
Such feature is useful for multi board support by one u-boot binary.
Each board should define two functions:
- get_dfu_alt_system()
- get_dfu_alt_boot()

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 13:58:49 +09:00
Inha Song
0954dd61ba samsung: misc: add env default option to lcd menu
This change allows reset device environment to default without using u-boot
console, which is useful for system developers.

Signed-off-by: Inha Song <ideal.song@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-07 19:40:39 +09:00
Przemyslaw Marczak
5c7b8a379f samsung: misc: add gpt restore option to lcd menu
This menu option allows restore gpt.
This is usefull and no needs access to the u-boot console.
For proper operation:
- each partition uuid should be set in environment or
- CONFIG_RANDOM_UUID should be defined for automatically uuid setting

After operation success device is going to be reset.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-07 19:40:39 +09:00
Piotr Wilczek
eee2fab0bd board:samsung:common: set envs with board unified information
This patch sets envs that describe board information.
The following envs are set: soc_id, soc_rev, board_rev.
Based on this information, if CONFIG_OF_LIBFDT is enabled,
the 'fdtfile' env is set as:
fdtfile=${soc_family}${soc_id}-${board}.dtb

The generated envs are intenionally not saved to persistent storage.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-02-07 10:06:24 +09:00
Przemyslaw Marczak
9d29a682a8 samsung: misc: Add LCD download menu.
This simple LCD menu allows run one of download mode on device
without writing on console or for fast and easy upgrade.

This feature check user keys combination at boot:
- power key + volume up - download menu
- power key + volume down - thor mode (without menu)

New configs:
- CONFIG_LCD_MENU
- CONFIG_LCD_MENU_BOARD

For proper effect this feature needs following definitions:

Power key:
- KEY_PWR_PMIC_NAME - (string) pmic which supports power key check

Register address:
- KEY_PWR_STATUS_REG
- KEY_PWR_INTERRUPT_REG

Register power key mask:
- KEY_PWR_STATUS_MASK
- KEY_PWR_INTERRUPT_MASK

Gpio numbers:
- KEY_PWR_INTERRUPT_MASK
- KEY_VOL_DOWN_GPIO

Functions needs to be called:
- keys_init() - for set proper gpio direction
- check_boot_mode() - menu - main function

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-02-03 15:36:14 +09:00
Przemyslaw Marczak
679549d180 samsung: common: Add file for common functions, draw_logo() cleanup.
Changes:

new file:
- board/samsung/common/misc.c
  depends on: CONFIG_MISC_COMMON
- move draw_logo() to misc.c

configs: trats, trats2, universal:
- enable CONFIG_MISC_COMMON,
- enable CONFIG_MISC_INIT_R,
- add misc_init_r() and call draw_logo() in it.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-02-03 15:36:14 +09:00