driver: net: consolidate ti's code in separate folder

Add drivers/net/ti/ folder and move all TI's code in this folder for better
maintenance.

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

arch/arm/mach-davinci/dp83848.c

@@ -12,7 +12,7 @@
 #include <net.h>
 #include <dp83848.h>
 #include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 #ifdef CONFIG_DRIVER_TI_EMAC
 

arch/arm/mach-davinci/et1011c.c

@@ -9,7 +9,7 @@
 #include <net.h>
 #include <miiphy.h>
 #include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 #ifdef CONFIG_DRIVER_TI_EMAC
 

arch/arm/mach-davinci/ksz8873.c

@@ -19,7 +19,7 @@
 #include <net.h>
 #include <asm/arch/emac_defs.h>
 #include <asm/io.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 int ksz8873_is_phy_connected(int phy_addr)
 {

arch/arm/mach-davinci/lxt972.c

@@ -13,7 +13,7 @@
 #include <miiphy.h>
 #include <lxt971a.h>
 #include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 #ifdef CONFIG_DRIVER_TI_EMAC
 

drivers/net/Kconfig

@@ -11,13 +11,6 @@ config DM_ETH
 	  This is currently implemented in net/eth-uclass.c
 	  Look in include/net.h for details.
 
-config DRIVER_TI_CPSW
-	bool "TI Common Platform Ethernet Switch"
-	select PHYLIB
-	help
-	  This driver supports the TI three port switch gigabit ethernet
-	  subsystem found in the TI SoCs.
-
 menuconfig NETDEVICES
 	bool "Network device support"
 	depends on NET
@@ -355,10 +348,7 @@ config SH_ETHER
 	help
 	  This driver supports the Ethernet for Renesas SH and ARM SoCs.
 
-config DRIVER_TI_EMAC
-	bool "TI Davinci EMAC"
-	help
-	   Support for davinci emac
+source "drivers/net/ti/Kconfig"
 
 config XILINX_AXIEMAC
 	depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)

drivers/net/Makefile

@@ -30,7 +30,6 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o
 obj-$(CONFIG_FTMAC110) += ftmac110.o
 obj-$(CONFIG_FTMAC100) += ftmac100.o
 obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o
-obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
 obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
 obj-$(CONFIG_LAN91C96) += lan91c96.o
 obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
@@ -57,9 +56,7 @@ obj-$(CONFIG_SH_ETHER) += sh_eth.o
 obj-$(CONFIG_RENESAS_RAVB) += ravb.o
 obj-$(CONFIG_SMC91111) += smc91111.o
 obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
 obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
-obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o
 obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o
 obj-$(CONFIG_ULI526X) += uli526x.o
 obj-$(CONFIG_VSC7385_ENET) += vsc7385.o
@@ -74,3 +71,4 @@ obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o
 obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
 obj-$(CONFIG_FSL_PFE) += pfe_eth/
 obj-$(CONFIG_SNI_AVE) += sni_ave.o
+obj-y += ti/

drivers/net/ti/Kconfig

@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+config DRIVER_TI_CPSW
+	bool "TI Common Platform Ethernet Switch"
+	select PHYLIB
+	help
+	  This driver supports the TI three port switch gigabit ethernet
+	  subsystem found in the TI SoCs.
+
+config DRIVER_TI_EMAC
+	bool "TI Davinci EMAC"
+	help
+	   Support for davinci emac

drivers/net/ti/Makefile

@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o
+obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
+obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o