From fd6e0b05252dd20579129d420442ef017287e89d Mon Sep 17 00:00:00 2001 From: Lars Povlsen Date: Tue, 8 Jan 2019 10:38:33 +0100 Subject: [PATCH] mips: spi: mscc: Add fast bitbang SPI driver This patch add a new SPI driver for MSCC SOCs that does not sport the designware SPI hardware controller. Performance gain: 7.664 seconds vs. 17.633 for 1 Mbyte write. Signed-off-by: Lars Povlsen Reviewed-by: Daniel Schwierzeck --- MAINTAINERS | 1 + arch/mips/mach-mscc/include/mach/common.h | 38 ++++ drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/mscc_bb_spi.c | 236 ++++++++++++++++++++++ 5 files changed, 283 insertions(+) create mode 100644 drivers/spi/mscc_bb_spi.c diff --git a/MAINTAINERS b/MAINTAINERS index d474dfa3d6..1039269676 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -524,6 +524,7 @@ F: arch/mips/dts/ocelot* F: board/mscc/ F: configs/mscc* F: drivers/gpio/mscc_sgpio.c +F: drivers/spi/mscc_bb_spi.c F: include/configs/vcoreiii.h MIPS JZ4780 diff --git a/arch/mips/mach-mscc/include/mach/common.h b/arch/mips/mach-mscc/include/mach/common.h index d18ae78bfd..7765c060ed 100644 --- a/arch/mips/mach-mscc/include/mach/common.h +++ b/arch/mips/mach-mscc/include/mach/common.h @@ -29,6 +29,44 @@ /* Common utility functions */ +/* + * Perform a number of NOP instructions, blocks of 8 instructions. + * The (inlined) function will not affect cache or processor state. + */ +static inline void mscc_vcoreiii_nop_delay(int delay) +{ + while (delay > 0) { +#define DELAY_8_NOPS() asm volatile("nop; nop; nop; nop; nop; nop; nop; nop;") + switch (delay) { + case 8: + DELAY_8_NOPS(); + /* fallthrough */ + case 7: + DELAY_8_NOPS(); + /* fallthrough */ + case 6: + DELAY_8_NOPS(); + /* fallthrough */ + case 5: + DELAY_8_NOPS(); + /* fallthrough */ + case 4: + DELAY_8_NOPS(); + /* fallthrough */ + case 3: + DELAY_8_NOPS(); + /* fallthrough */ + case 2: + DELAY_8_NOPS(); + /* fallthrough */ + case 1: + DELAY_8_NOPS(); + } + delay -= 8; +#undef DELAY_8_NOPS + } +} + int mscc_phy_rd_wr(u8 read, u32 miim_controller, u8 miim_addr, diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a7bb5b35c2..de4d62dd8f 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -294,6 +294,13 @@ config SOFT_SPI Enable Soft SPI driver. This driver is to use GPIO simulate the SPI protocol. +config MSCC_BB_SPI + bool "MSCC bitbang SPI driver" + depends on SOC_VCOREIII + help + Enable MSCC bitbang SPI driver. This driver can be used on + MSCC SOCs. + config CF_SPI bool "ColdFire SPI driver" help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 392a925795..4acec3ea17 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o obj-$(CONFIG_MTK_QSPI) += mtk_qspi.o obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o +obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o obj-$(CONFIG_MXC_SPI) += mxc_spi.o obj-$(CONFIG_MXS_SPI) += mxs_spi.o diff --git a/drivers/spi/mscc_bb_spi.c b/drivers/spi/mscc_bb_spi.c new file mode 100644 index 0000000000..c3c7b80426 --- /dev/null +++ b/drivers/spi/mscc_bb_spi.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Microsemi SoCs spi driver + * + * Copyright (c) 2018 Microsemi Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mscc_bb_priv { + void __iomem *regs; + u32 deactivate_delay_us; + bool cs_active; /* State flag as to whether CS is asserted */ + int cs_num; + u32 svalue; /* Value to start transfer with */ + u32 clk1; /* Clock value start */ + u32 clk2; /* Clock value 2nd phase */ +}; + +/* Delay 24 instructions for this particular application */ +#define hold_time_delay() mscc_vcoreiii_nop_delay(3) + +static int mscc_bb_spi_cs_activate(struct mscc_bb_priv *priv, int mode, int cs) +{ + if (!priv->cs_active) { + int cpha = mode & SPI_CPHA; + u32 cs_value; + + priv->cs_num = cs; + + if (cpha) { + /* Initial clock starts SCK=1 */ + priv->clk1 = ICPU_SW_MODE_SW_SPI_SCK; + priv->clk2 = 0; + } else { + /* Initial clock starts SCK=0 */ + priv->clk1 = 0; + priv->clk2 = ICPU_SW_MODE_SW_SPI_SCK; + } + + /* Enable bitbang, SCK_OE, SDO_OE */ + priv->svalue = (ICPU_SW_MODE_SW_PIN_CTRL_MODE | /* Bitbang */ + ICPU_SW_MODE_SW_SPI_SCK_OE | /* SCK_OE */ + ICPU_SW_MODE_SW_SPI_SDO_OE); /* SDO OE */ + + /* Add CS */ + if (cs >= 0) { + cs_value = + ICPU_SW_MODE_SW_SPI_CS_OE(BIT(cs)) | + ICPU_SW_MODE_SW_SPI_CS(BIT(cs)); + } else { + cs_value = 0; + } + + priv->svalue |= cs_value; + + /* Enable the CS in HW, Initial clock value */ + writel(priv->svalue | priv->clk2, priv->regs); + + priv->cs_active = true; + debug("Activated CS%d\n", priv->cs_num); + } + + return 0; +} + +static int mscc_bb_spi_cs_deactivate(struct mscc_bb_priv *priv, int deact_delay) +{ + if (priv->cs_active) { + /* Keep driving the CLK to its current value while + * actively deselecting CS. + */ + u32 value = readl(priv->regs); + + value &= ~ICPU_SW_MODE_SW_SPI_CS_M; + writel(value, priv->regs); + hold_time_delay(); + + /* Stop driving the clock, but keep CS with nCS == 1 */ + value &= ~ICPU_SW_MODE_SW_SPI_SCK_OE; + writel(value, priv->regs); + + /* Deselect hold time delay */ + if (deact_delay) + udelay(deact_delay); + + /* Drop everything */ + writel(0, priv->regs); + + priv->cs_active = false; + debug("Deactivated CS%d\n", priv->cs_num); + } + + return 0; +} + +int mscc_bb_spi_claim_bus(struct udevice *dev) +{ + return 0; +} + +int mscc_bb_spi_release_bus(struct udevice *dev) +{ + return 0; +} + +int mscc_bb_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev_get_parent(dev); + struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev); + struct mscc_bb_priv *priv = dev_get_priv(bus); + u32 i, count; + const u8 *txd = dout; + u8 *rxd = din; + + debug("spi_xfer: slave %s:%s cs%d mode %d, dout %p din %p bitlen %u\n", + dev->parent->name, dev->name, plat->cs, plat->mode, dout, + din, bitlen); + + if (flags & SPI_XFER_BEGIN) + mscc_bb_spi_cs_activate(priv, plat->mode, plat->cs); + + count = bitlen / 8; + for (i = 0; i < count; i++) { + u32 rx = 0, mask = 0x80, value; + + while (mask) { + /* Initial condition: CLK is low. */ + value = priv->svalue; + if (txd && txd[i] & mask) + value |= ICPU_SW_MODE_SW_SPI_SDO; + + /* Drive data while taking CLK low. The device + * we're accessing will sample on the + * following rising edge and will output data + * on this edge for us to be sampled at the + * end of this loop. + */ + writel(value | priv->clk1, priv->regs); + + /* Wait for t_setup. All devices do have a + * setup-time, so we always insert some delay + * here. Some devices have a very long + * setup-time, which can be adjusted by the + * user through vcoreiii_device->delay. + */ + hold_time_delay(); + + /* Drive the clock high. */ + writel(value | priv->clk2, priv->regs); + + /* Wait for t_hold. See comment about t_setup + * above. + */ + hold_time_delay(); + + /* We sample as close to the next falling edge + * as possible. + */ + value = readl(priv->regs); + if (value & ICPU_SW_MODE_SW_SPI_SDI) + rx |= mask; + mask >>= 1; + } + if (rxd) { + debug("Read 0x%02x\n", rx); + rxd[i] = (u8)rx; + } + debug("spi_xfer: byte %d/%d\n", i + 1, count); + } + + debug("spi_xfer: done\n"); + + if (flags & SPI_XFER_END) + mscc_bb_spi_cs_deactivate(priv, priv->deactivate_delay_us); + + return 0; +} + +int mscc_bb_spi_set_speed(struct udevice *dev, unsigned int speed) +{ + /* Accept any speed */ + return 0; +} + +int mscc_bb_spi_set_mode(struct udevice *dev, unsigned int mode) +{ + return 0; +} + +static const struct dm_spi_ops mscc_bb_ops = { + .claim_bus = mscc_bb_spi_claim_bus, + .release_bus = mscc_bb_spi_release_bus, + .xfer = mscc_bb_spi_xfer, + .set_speed = mscc_bb_spi_set_speed, + .set_mode = mscc_bb_spi_set_mode, +}; + +static const struct udevice_id mscc_bb_ids[] = { + { .compatible = "mscc,luton-bb-spi" }, + { } +}; + +static int mscc_bb_spi_probe(struct udevice *bus) +{ + struct mscc_bb_priv *priv = dev_get_priv(bus); + + debug("%s: loaded, priv %p\n", __func__, priv); + + priv->regs = (void __iomem *)dev_read_addr(bus); + + priv->deactivate_delay_us = + dev_read_u32_default(bus, "spi-deactivate-delay", 0); + + priv->cs_active = false; + + return 0; +} + +U_BOOT_DRIVER(mscc_bb) = { + .name = "mscc_bb", + .id = UCLASS_SPI, + .of_match = mscc_bb_ids, + .ops = &mscc_bb_ops, + .priv_auto_alloc_size = sizeof(struct mscc_bb_priv), + .probe = mscc_bb_spi_probe, +};