mxs: Convert sys_proto.h prefixes to 'mxs'

The sys_proto.h functions (except the boot modes) are compatible with
i.MX233 and i.MX28 so we use 'mxs' prefix for its methods.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This commit is contained in:
Otavio Salvador 2012-08-13 09:53:12 +00:00 committed by Albert ARIBAUD
parent af963ba8f4
commit fa7a51cb82
11 changed files with 44 additions and 44 deletions

View File

@ -41,8 +41,8 @@ DECLARE_GLOBAL_DATA_PTR;
/* 1 second delay should be plenty of time for block reset. */
#define RESET_MAX_TIMEOUT 1000000
#define MX28_BLOCK_SFTRST (1 << 31)
#define MX28_BLOCK_CLKGATE (1 << 30)
#define MXS_BLOCK_SFTRST (1 << 31)
#define MXS_BLOCK_CLKGATE (1 << 30)
/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
inline void lowlevel_init(void) {}
@ -81,7 +81,7 @@ void enable_caches(void)
#endif
}
int mx28_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, int timeout)
int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, int timeout)
{
while (--timeout) {
if ((readl(&reg->reg) & mask) == mask)
@ -92,7 +92,7 @@ int mx28_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, int timeout)
return !timeout;
}
int mx28_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, int timeout)
int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, int timeout)
{
while (--timeout) {
if ((readl(&reg->reg) & mask) == 0)
@ -103,34 +103,34 @@ int mx28_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, int timeout)
return !timeout;
}
int mx28_reset_block(struct mxs_register_32 *reg)
int mxs_reset_block(struct mxs_register_32 *reg)
{
/* Clear SFTRST */
writel(MX28_BLOCK_SFTRST, &reg->reg_clr);
writel(MXS_BLOCK_SFTRST, &reg->reg_clr);
if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
return 1;
/* Clear CLKGATE */
writel(MX28_BLOCK_CLKGATE, &reg->reg_clr);
writel(MXS_BLOCK_CLKGATE, &reg->reg_clr);
/* Set SFTRST */
writel(MX28_BLOCK_SFTRST, &reg->reg_set);
writel(MXS_BLOCK_SFTRST, &reg->reg_set);
/* Wait for CLKGATE being set */
if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
return 1;
/* Clear SFTRST */
writel(MX28_BLOCK_SFTRST, &reg->reg_clr);
writel(MXS_BLOCK_SFTRST, &reg->reg_clr);
if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
return 1;
/* Clear CLKGATE */
writel(MX28_BLOCK_CLKGATE, &reg->reg_clr);
writel(MXS_BLOCK_CLKGATE, &reg->reg_clr);
if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
return 1;
return 0;
@ -229,7 +229,7 @@ int print_cpuinfo(void)
get_cpu_type(),
get_cpu_rev(),
mxc_get_clock(MXC_ARM_CLK) / 1000000);
printf("BOOT: %s\n", mx28_boot_modes[data->boot_mode_idx].mode);
printf("BOOT: %s\n", mxs_boot_modes[data->boot_mode_idx].mode);
return 0;
}
#endif
@ -299,7 +299,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
MXS_OCOTP_MAX_TIMEOUT)) {
printf("MXS FEC: Can't get MAC from OCOTP\n");
return;

View File

@ -82,9 +82,9 @@ uint8_t mxs_get_bootmode_index(void)
bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4;
bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
for (i = 0; i < ARRAY_SIZE(mx28_boot_modes); i++) {
masked = bootmode & mx28_boot_modes[i].boot_mask;
if (masked == mx28_boot_modes[i].boot_pads)
for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) {
masked = bootmode & mxs_boot_modes[i].boot_mask;
if (masked == mxs_boot_modes[i].boot_pads)
break;
}

View File

@ -66,7 +66,7 @@ int timer_init(void)
(struct mxs_timrot_regs *)MXS_TIMROT_BASE;
/* Reset Timers and Rotary Encoder module */
mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
/* Set fixed_count to 0 */
writel(0, &timrot_regs->hw_timrot_fixed_count0);

View File

@ -1,5 +1,5 @@
/*
* Freescale i.MX28 MX28 specific functions
* Freescale i.MX233/i.MX28 specific functions
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
@ -20,14 +20,14 @@
*
*/
#ifndef __MX28_H__
#define __MX28_H__
#ifndef __SYS_PROTO_H__
#define __SYS_PROTO_H__
int mx28_reset_block(struct mxs_register_32 *reg);
int mx28_wait_mask_set(struct mxs_register_32 *reg,
int mxs_reset_block(struct mxs_register_32 *reg);
int mxs_wait_mask_set(struct mxs_register_32 *reg,
uint32_t mask,
int timeout);
int mx28_wait_mask_clr(struct mxs_register_32 *reg,
int mxs_wait_mask_clr(struct mxs_register_32 *reg,
uint32_t mask,
int timeout);
@ -39,13 +39,13 @@ void mxs_common_spl_init(const iomux_cfg_t *iomux_setup,
const unsigned int iomux_size);
#endif
struct mx28_pair {
struct mxs_pair {
uint8_t boot_pads;
uint8_t boot_mask;
const char *mode;
};
static const struct mx28_pair mx28_boot_modes[] = {
static const struct mxs_pair mxs_boot_modes[] = {
{ 0x00, 0x0f, "USB #0" },
{ 0x01, 0x1f, "I2C #0, master, 3V3" },
{ 0x11, 0x1f, "I2C #0, master, 1V8" },
@ -69,6 +69,6 @@ struct mxs_spl_data {
uint32_t mem_dram_size;
};
int mx28_dram_init(void);
int mxs_dram_init(void);
#endif /* __MX28_H__ */
#endif /* __SYS_PROTO_H__ */

View File

@ -130,7 +130,7 @@ void get_board_serial(struct tag_serialnr *serialnr)
writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
MXS_OCOTP_MAX_TIMEOUT)) {
printf("MXS: Can't get serial number from OCOTP\n");
return;

View File

@ -512,7 +512,7 @@ static int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan)
if (ret)
return ret;
if (mx28_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg,
if (mxs_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg,
1 << chan, timeout)) {
ret = -ETIMEDOUT;
mxs_dma_reset(chan);
@ -557,7 +557,7 @@ void mxs_dma_init(void)
struct mxs_apbh_regs *apbh_regs =
(struct mxs_apbh_regs *)MXS_APBH_BASE;
mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg);
mxs_reset_block(&apbh_regs->hw_apbh_ctrl0_reg);
#ifdef CONFIG_APBH_DMA_BURST8
writel(APBH_CTRL0_AHB_BURST8_EN,

View File

@ -41,7 +41,7 @@ void mxs_i2c_reset(void)
struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE;
int ret;
ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg);
ret = mxs_reset_block(&i2c_regs->hw_i2c_ctrl0_reg);
if (ret) {
debug("MXS I2C: Block reset timeout\n");
return;

View File

@ -336,7 +336,7 @@ static int mxsmmc_init(struct mmc *mmc)
struct mxs_ssp_regs *ssp_regs = priv->regs;
/* Reset SSP */
mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
/* 8 bits word length in MMC mode */
clrsetbits_le32(&ssp_regs->hw_ssp_ctrl1,

View File

@ -237,7 +237,7 @@ static int mxs_nand_wait_for_bch_complete(void)
int timeout = MXS_NAND_BCH_TIMEOUT;
int ret;
ret = mx28_wait_mask_set(&bch_regs->hw_bch_ctrl_reg,
ret = mxs_wait_mask_set(&bch_regs->hw_bch_ctrl_reg,
BCH_CTRL_COMPLETE_IRQ, timeout);
writel(BCH_CTRL_COMPLETE_IRQ, &bch_regs->hw_bch_ctrl_clr);
@ -972,7 +972,7 @@ static int mxs_nand_scan_bbt(struct mtd_info *mtd)
uint32_t tmp;
/* Configure BCH and set NFC geometry */
mx28_reset_block(&bch_regs->hw_bch_ctrl_reg);
mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);
/* Configure layout 0 */
tmp = (mxs_nand_ecc_chunk_cnt(mtd->writesize) - 1)
@ -1080,7 +1080,7 @@ int mxs_nand_init(struct mxs_nand_info *info)
}
/* Reset the GPMI block. */
mx28_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg);
mxs_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg);
/*
* Choose NAND mode, set IRQ polarity, disable write protection and

View File

@ -41,7 +41,7 @@ int mxs_rtc_set_time(uint32_t secs)
* is taken from the linux kernel driver for the STMP37xx RTC since
* documentation doesn't mention it.
*/
ret = mx28_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg,
ret = mxs_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg,
0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT);
if (ret)
@ -80,7 +80,7 @@ void rtc_reset(void)
mxs_rtc_set_time(0);
/* Reset the RTC block */
ret = mx28_reset_block(&rtc_regs->hw_rtc_ctrl_reg);
ret = mxs_reset_block(&rtc_regs->hw_rtc_ctrl_reg);
if (ret)
printf("MXS RTC: Block reset timeout\n");
}

View File

@ -139,7 +139,7 @@ int spi_claim_bus(struct spi_slave *slave)
struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
uint32_t reg = 0;
mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
@ -193,7 +193,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
if (mxs_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for start\n");
return -ETIMEDOUT;
@ -205,7 +205,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
if (!write) {
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for data\n");
return -ETIMEDOUT;
@ -215,7 +215,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
data++;
}
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for finish\n");
return -ETIMEDOUT;