sunxi: emac: Prepare for driver-model support

Split all the core functionality out into functions taking a
struct emac_eth_dev *priv argument as preparation for adding driver-model
support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Hans de Goede 2015-04-18 14:44:38 +02:00
parent 8145dea468
commit f9f62d2dac

View File

@ -309,9 +309,9 @@ static void emac_setup(struct emac_eth_dev *priv)
writel(EMAC_MAC_MFL, &regs->mac_maxf);
}
static void emac_reset(struct eth_device *dev)
static void emac_reset(struct emac_eth_dev *priv)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
struct emac_regs *regs = priv->regs;
debug("resetting device\n");
@ -323,10 +323,9 @@ static void emac_reset(struct eth_device *dev)
udelay(200);
}
static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
static int _sunxi_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
struct emac_eth_dev *priv = dev->priv;
struct emac_regs *regs = priv->regs;
int ret;
/* Init EMAC */
@ -347,14 +346,14 @@ static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
/* Set up EMAC */
emac_setup(priv);
writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
dev->enetaddr[2], &regs->mac_a1);
writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
dev->enetaddr[5], &regs->mac_a0);
writel(enetaddr[0] << 16 | enetaddr[1] << 8 | enetaddr[2],
&regs->mac_a1);
writel(enetaddr[3] << 16 | enetaddr[4] << 8 | enetaddr[5],
&regs->mac_a0);
mdelay(1);
emac_reset(dev);
emac_reset(priv);
/* PHY POWER UP */
ret = phy_startup(priv->phydev);
@ -390,14 +389,9 @@ static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
return 0;
}
static void sunxi_emac_eth_halt(struct eth_device *dev)
static int _sunxi_emac_eth_recv(struct emac_eth_dev *priv, void *packet)
{
/* Nothing to do here */
}
static int sunxi_emac_eth_recv(struct eth_device *dev)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
struct emac_regs *regs = priv->regs;
struct emac_rxhdr rxhdr;
u32 rxcount;
u32 reg_val;
@ -415,7 +409,7 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
/* Had one stuck? */
rxcount = readl(&regs->rx_fbc);
if (!rxcount)
return 0;
return -EAGAIN;
}
reg_val = readl(&regs->rx_io_data);
@ -431,7 +425,7 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
/* Enable RX */
setbits_le32(&regs->ctl, 0x1 << 2);
return 0;
return -EAGAIN;
}
/* A packet ready now
@ -463,22 +457,19 @@ static int sunxi_emac_eth_recv(struct eth_device *dev)
if (good_packet) {
if (rx_len > DMA_CPU_TRRESHOLD) {
printf("Received packet is too big (len=%d)\n", rx_len);
} else {
emac_inblk_32bit((void *)&regs->rx_io_data,
net_rx_packets[0], rx_len);
/* Pass to upper layer */
net_process_received_packet(net_rx_packets[0], rx_len);
return rx_len;
return -EMSGSIZE;
}
emac_inblk_32bit((void *)&regs->rx_io_data, packet, rx_len);
return rx_len;
}
return 0;
return -EIO; /* Bad packet */
}
static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
static int _sunxi_emac_eth_send(struct emac_eth_dev *priv, void *packet,
int len)
{
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
struct emac_regs *regs = priv->regs;
/* Select channel 0 */
writel(0, &regs->tx_ins);
@ -495,17 +486,64 @@ static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
return 0;
}
int sunxi_emac_initialize(void)
static void sunxi_emac_board_setup(struct emac_eth_dev *priv)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_sramc_regs *sram =
(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
struct emac_regs *regs = priv->regs;
int pin;
/* Map SRAM to EMAC */
setbits_le32(&sram->ctrl1, 0x5 << 2);
/* Configure pin mux settings for MII Ethernet */
for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
/* Set up clock gating */
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
/* Set MII clock */
clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
}
static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bis)
{
return _sunxi_emac_eth_init(dev->priv, dev->enetaddr);
}
static void sunxi_emac_eth_halt(struct eth_device *dev)
{
/* Nothing to do here */
}
static int sunxi_emac_eth_recv(struct eth_device *dev)
{
int rx_len;
rx_len = _sunxi_emac_eth_recv(dev->priv, net_rx_packets[0]);
if (rx_len <= 0)
return 0;
/* Pass to upper layer */
net_process_received_packet(net_rx_packets[0], rx_len);
return rx_len;
}
static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int length)
{
return _sunxi_emac_eth_send(dev->priv, packet, length);
}
int sunxi_emac_initialize(void)
{
struct emac_regs *regs =
(struct emac_regs *)SUNXI_EMAC_BASE;
struct eth_device *dev;
struct emac_eth_dev *priv;
int pin;
dev = malloc(sizeof(*dev));
if (dev == NULL)
@ -520,19 +558,6 @@ int sunxi_emac_initialize(void)
memset(dev, 0, sizeof(*dev));
memset(priv, 0, sizeof(struct emac_eth_dev));
/* Map SRAM to EMAC */
setbits_le32(&sram->ctrl1, 0x5 << 2);
/* Configure pin mux settings for MII Ethernet */
for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
/* Set up clock gating */
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
/* Set MII clock */
clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
priv->regs = regs;
dev->iobase = (int)regs;
dev->priv = priv;
@ -542,6 +567,8 @@ int sunxi_emac_initialize(void)
dev->recv = sunxi_emac_eth_recv;
strcpy(dev->name, "emac");
sunxi_emac_board_setup(priv);
eth_register(dev);
return sunxi_emac_init_phy(priv, dev);