virtio: Add net driver support
This adds virtio net device driver support. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Tuomas Tynkkynen
Simon Glass
parent
fdc4aca89e
commit
f371ad3064
|
|
@ -29,4 +29,11 @@ config VIRTIO_MMIO
|
|||
This driver provides support for memory mapped virtio
|
||||
platform device driver.
|
||||
|
||||
config VIRTIO_NET
|
||||
bool "virtio net driver"
|
||||
depends on VIRTIO
|
||||
help
|
||||
This is the virtual net driver for virtio. It can be used with
|
||||
QEMU based targets.
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -5,3 +5,4 @@
|
|||
|
||||
obj-y += virtio-uclass.o virtio_ring.o
|
||||
obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
|
||||
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,218 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2018, Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
|
||||
* Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <net.h>
|
||||
#include <virtio_types.h>
|
||||
#include <virtio.h>
|
||||
#include <virtio_ring.h>
|
||||
#include "virtio_net.h"
|
||||
|
||||
/* Amount of buffers to keep in the RX virtqueue */
|
||||
#define VIRTIO_NET_NUM_RX_BUFS 32
|
||||
|
||||
/*
|
||||
* This value comes from the VirtIO spec: 1500 for maximum packet size,
|
||||
* 14 for the Ethernet header, 12 for virtio_net_hdr. In total 1526 bytes.
|
||||
*/
|
||||
#define VIRTIO_NET_RX_BUF_SIZE 1526
|
||||
|
||||
struct virtio_net_priv {
|
||||
union {
|
||||
struct virtqueue *vqs[2];
|
||||
struct {
|
||||
struct virtqueue *rx_vq;
|
||||
struct virtqueue *tx_vq;
|
||||
};
|
||||
};
|
||||
|
||||
char rx_buff[VIRTIO_NET_NUM_RX_BUFS][VIRTIO_NET_RX_BUF_SIZE];
|
||||
bool rx_running;
|
||||
};
|
||||
|
||||
/*
|
||||
* For simplicity, the driver only negotiates the VIRTIO_NET_F_MAC feature.
|
||||
* For the VIRTIO_NET_F_STATUS feature, we don't negotiate it, hence per spec
|
||||
* we should assume the link is always active.
|
||||
*/
|
||||
static const u32 feature[] = {
|
||||
VIRTIO_NET_F_MAC
|
||||
};
|
||||
|
||||
static const u32 feature_legacy[] = {
|
||||
VIRTIO_NET_F_MAC
|
||||
};
|
||||
|
||||
static int virtio_net_start(struct udevice *dev)
|
||||
{
|
||||
struct virtio_net_priv *priv = dev_get_priv(dev);
|
||||
struct virtio_sg sg;
|
||||
struct virtio_sg *sgs[] = { &sg };
|
||||
int i;
|
||||
|
||||
if (!priv->rx_running) {
|
||||
/* receive buffer length is always 1526 */
|
||||
sg.length = VIRTIO_NET_RX_BUF_SIZE;
|
||||
|
||||
/* setup the receive buffer address */
|
||||
for (i = 0; i < VIRTIO_NET_NUM_RX_BUFS; i++) {
|
||||
sg.addr = priv->rx_buff[i];
|
||||
virtqueue_add(priv->rx_vq, sgs, 0, 1);
|
||||
}
|
||||
|
||||
virtqueue_kick(priv->rx_vq);
|
||||
|
||||
/* setup the receive queue only once */
|
||||
priv->rx_running = true;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int virtio_net_send(struct udevice *dev, void *packet, int length)
|
||||
{
|
||||
struct virtio_net_priv *priv = dev_get_priv(dev);
|
||||
struct virtio_net_hdr hdr;
|
||||
struct virtio_sg hdr_sg = { &hdr, sizeof(hdr) };
|
||||
struct virtio_sg data_sg = { packet, length };
|
||||
struct virtio_sg *sgs[] = { &hdr_sg, &data_sg };
|
||||
int ret;
|
||||
|
||||
memset(&hdr, 0, sizeof(struct virtio_net_hdr));
|
||||
|
||||
ret = virtqueue_add(priv->tx_vq, sgs, 2, 0);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
virtqueue_kick(priv->tx_vq);
|
||||
|
||||
while (1) {
|
||||
if (virtqueue_get_buf(priv->tx_vq, NULL))
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int virtio_net_recv(struct udevice *dev, int flags, uchar **packetp)
|
||||
{
|
||||
struct virtio_net_priv *priv = dev_get_priv(dev);
|
||||
unsigned int len;
|
||||
void *buf;
|
||||
|
||||
buf = virtqueue_get_buf(priv->rx_vq, &len);
|
||||
if (!buf)
|
||||
return -EAGAIN;
|
||||
|
||||
*packetp = buf + sizeof(struct virtio_net_hdr);
|
||||
return len - sizeof(struct virtio_net_hdr);
|
||||
}
|
||||
|
||||
static int virtio_net_free_pkt(struct udevice *dev, uchar *packet, int length)
|
||||
{
|
||||
struct virtio_net_priv *priv = dev_get_priv(dev);
|
||||
void *buf = packet - sizeof(struct virtio_net_hdr);
|
||||
struct virtio_sg sg = { buf, VIRTIO_NET_RX_BUF_SIZE };
|
||||
struct virtio_sg *sgs[] = { &sg };
|
||||
|
||||
/* Put the buffer back to the rx ring */
|
||||
virtqueue_add(priv->rx_vq, sgs, 0, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void virtio_net_stop(struct udevice *dev)
|
||||
{
|
||||
/*
|
||||
* There is no way to stop the queue from running, unless we issue
|
||||
* a reset to the virtio device, and re-do the queue initialization
|
||||
* from the beginning.
|
||||
*/
|
||||
}
|
||||
|
||||
static int virtio_net_write_hwaddr(struct udevice *dev)
|
||||
{
|
||||
struct virtio_dev_priv *uc_priv = dev_get_uclass_priv(dev->parent);
|
||||
struct eth_pdata *pdata = dev_get_platdata(dev);
|
||||
int i;
|
||||
|
||||
/*
|
||||
* v1.0 compliant device's MAC address is set through control channel,
|
||||
* which we don't support for now.
|
||||
*/
|
||||
if (!uc_priv->legacy)
|
||||
return -ENOSYS;
|
||||
|
||||
for (i = 0; i < sizeof(pdata->enetaddr); i++) {
|
||||
virtio_cwrite8(dev,
|
||||
offsetof(struct virtio_net_config, mac) + i,
|
||||
pdata->enetaddr[i]);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int virtio_net_read_rom_hwaddr(struct udevice *dev)
|
||||
{
|
||||
struct eth_pdata *pdata = dev_get_platdata(dev);
|
||||
|
||||
if (!pdata)
|
||||
return -ENOSYS;
|
||||
|
||||
if (virtio_has_feature(dev, VIRTIO_NET_F_MAC)) {
|
||||
virtio_cread_bytes(dev,
|
||||
offsetof(struct virtio_net_config, mac),
|
||||
pdata->enetaddr, sizeof(pdata->enetaddr));
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int virtio_net_bind(struct udevice *dev)
|
||||
{
|
||||
struct virtio_dev_priv *uc_priv = dev_get_uclass_priv(dev->parent);
|
||||
|
||||
/* Indicate what driver features we support */
|
||||
virtio_driver_features_init(uc_priv, feature, ARRAY_SIZE(feature),
|
||||
feature_legacy, ARRAY_SIZE(feature_legacy));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int virtio_net_probe(struct udevice *dev)
|
||||
{
|
||||
struct virtio_net_priv *priv = dev_get_priv(dev);
|
||||
int ret;
|
||||
|
||||
ret = virtio_find_vqs(dev, 2, priv->vqs);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct eth_ops virtio_net_ops = {
|
||||
.start = virtio_net_start,
|
||||
.send = virtio_net_send,
|
||||
.recv = virtio_net_recv,
|
||||
.free_pkt = virtio_net_free_pkt,
|
||||
.stop = virtio_net_stop,
|
||||
.write_hwaddr = virtio_net_write_hwaddr,
|
||||
.read_rom_hwaddr = virtio_net_read_rom_hwaddr,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(virtio_net) = {
|
||||
.name = VIRTIO_NET_DRV_NAME,
|
||||
.id = UCLASS_ETH,
|
||||
.bind = virtio_net_bind,
|
||||
.probe = virtio_net_probe,
|
||||
.remove = virtio_reset,
|
||||
.ops = &virtio_net_ops,
|
||||
.priv_auto_alloc_size = sizeof(struct virtio_net_priv),
|
||||
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
||||
.flags = DM_FLAG_ACTIVE_DMA,
|
||||
};
|
||||
|
|
@ -0,0 +1,268 @@
|
|||
/* SPDX-License-Identifier: BSD-3-Clause */
|
||||
/*
|
||||
* Copyright (C) 2018, Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
|
||||
* Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
|
||||
*
|
||||
* From Linux kernel include/uapi/linux/virtio_net.h
|
||||
*/
|
||||
|
||||
#ifndef _LINUX_VIRTIO_NET_H
|
||||
#define _LINUX_VIRTIO_NET_H
|
||||
|
||||
/* TODO: needs to be removed! */
|
||||
#define ETH_ALEN 6
|
||||
|
||||
/* The feature bitmap for virtio net */
|
||||
|
||||
/* Host handles pkts w/ partial csum */
|
||||
#define VIRTIO_NET_F_CSUM 0
|
||||
/* Guest handles pkts w/ partial csum */
|
||||
#define VIRTIO_NET_F_GUEST_CSUM 1
|
||||
/* Dynamic offload configuration */
|
||||
#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2
|
||||
/* Initial MTU advice */
|
||||
#define VIRTIO_NET_F_MTU 3
|
||||
/* Host has given MAC address */
|
||||
#define VIRTIO_NET_F_MAC 5
|
||||
/* Guest can handle TSOv4 in */
|
||||
#define VIRTIO_NET_F_GUEST_TSO4 7
|
||||
/* Guest can handle TSOv6 in */
|
||||
#define VIRTIO_NET_F_GUEST_TSO6 8
|
||||
/* Guest can handle TSO[6] w/ ECN in */
|
||||
#define VIRTIO_NET_F_GUEST_ECN 9
|
||||
/* Guest can handle UFO in */
|
||||
#define VIRTIO_NET_F_GUEST_UFO 10
|
||||
/* Host can handle TSOv4 in */
|
||||
#define VIRTIO_NET_F_HOST_TSO4 11
|
||||
/* Host can handle TSOv6 in */
|
||||
#define VIRTIO_NET_F_HOST_TSO6 12
|
||||
/* Host can handle TSO[6] w/ ECN in */
|
||||
#define VIRTIO_NET_F_HOST_ECN 13
|
||||
/* Host can handle UFO in */
|
||||
#define VIRTIO_NET_F_HOST_UFO 14
|
||||
/* Host can merge receive buffers */
|
||||
#define VIRTIO_NET_F_MRG_RXBUF 15
|
||||
/* virtio_net_config.status available */
|
||||
#define VIRTIO_NET_F_STATUS 16
|
||||
/* Control channel available */
|
||||
#define VIRTIO_NET_F_CTRL_VQ 17
|
||||
/* Control channel RX mode support */
|
||||
#define VIRTIO_NET_F_CTRL_RX 18
|
||||
/* Control channel VLAN filtering */
|
||||
#define VIRTIO_NET_F_CTRL_VLAN 19
|
||||
/* Extra RX mode control support */
|
||||
#define VIRTIO_NET_F_CTRL_RX_EXTRA 20
|
||||
/* Guest can announce device on the network */
|
||||
#define VIRTIO_NET_F_GUEST_ANNOUNCE 21
|
||||
/* Device supports receive flow steering */
|
||||
#define VIRTIO_NET_F_MQ 22
|
||||
/* Set MAC address */
|
||||
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23
|
||||
/* Device set linkspeed and duplex */
|
||||
#define VIRTIO_NET_F_SPEED_DUPLEX 63
|
||||
|
||||
#ifndef VIRTIO_NET_NO_LEGACY
|
||||
/* Host handles pkts w/ any GSO type */
|
||||
#define VIRTIO_NET_F_GSO 6
|
||||
#endif /* VIRTIO_NET_NO_LEGACY */
|
||||
|
||||
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
|
||||
#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
|
||||
|
||||
struct __packed virtio_net_config {
|
||||
/* The config defining mac address (if VIRTIO_NET_F_MAC) */
|
||||
__u8 mac[ETH_ALEN];
|
||||
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
|
||||
__u16 status;
|
||||
/*
|
||||
* Maximum number of each of transmit and receive queues;
|
||||
* see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
|
||||
* Legal values are between 1 and 0x8000
|
||||
*/
|
||||
__u16 max_virtqueue_pairs;
|
||||
/* Default maximum transmit unit advice */
|
||||
__u16 mtu;
|
||||
/*
|
||||
* speed, in units of 1Mb. All values 0 to INT_MAX are legal.
|
||||
* Any other value stands for unknown.
|
||||
*/
|
||||
__u32 speed;
|
||||
/*
|
||||
* 0x00 - half duplex
|
||||
* 0x01 - full duplex
|
||||
* Any other value stands for unknown.
|
||||
*/
|
||||
__u8 duplex;
|
||||
};
|
||||
|
||||
/*
|
||||
* This header comes first in the scatter-gather list. If you don't
|
||||
* specify GSO or CSUM features, you can simply ignore the header.
|
||||
*
|
||||
* This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
|
||||
* only flattened.
|
||||
*/
|
||||
struct virtio_net_hdr_v1 {
|
||||
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 0x01 /* Use csum_start, csum_offset */
|
||||
#define VIRTIO_NET_HDR_F_DATA_VALID 0x02 /* Csum is valid */
|
||||
__u8 flags;
|
||||
#define VIRTIO_NET_HDR_GSO_NONE 0x00 /* Not a GSO frame */
|
||||
#define VIRTIO_NET_HDR_GSO_TCPV4 0x01 /* GSO frame, IPv4 TCP (TSO) */
|
||||
#define VIRTIO_NET_HDR_GSO_UDP 0x03 /* GSO frame, IPv4 UDP (UFO) */
|
||||
#define VIRTIO_NET_HDR_GSO_TCPV6 0x04 /* GSO frame, IPv6 TCP */
|
||||
#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */
|
||||
__u8 gso_type;
|
||||
__virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
|
||||
__virtio16 gso_size; /* Bytes to append to hdr_len per frame */
|
||||
__virtio16 csum_start; /* Position to start checksumming from */
|
||||
__virtio16 csum_offset; /* Offset after that to place checksum */
|
||||
__virtio16 num_buffers; /* Number of merged rx buffers */
|
||||
};
|
||||
|
||||
#ifndef VIRTIO_NET_NO_LEGACY
|
||||
/*
|
||||
* This header comes first in the scatter-gather list.
|
||||
*
|
||||
* For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
|
||||
* be the first element of the scatter-gather list. If you don't
|
||||
* specify GSO or CSUM features, you can simply ignore the header.
|
||||
*/
|
||||
struct virtio_net_hdr {
|
||||
/* See VIRTIO_NET_HDR_F_* */
|
||||
__u8 flags;
|
||||
/* See VIRTIO_NET_HDR_GSO_* */
|
||||
__u8 gso_type;
|
||||
__virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
|
||||
__virtio16 gso_size; /* Bytes to append to hdr_len per frame */
|
||||
__virtio16 csum_start; /* Position to start checksumming from */
|
||||
__virtio16 csum_offset; /* Offset after that to place checksum */
|
||||
};
|
||||
|
||||
/*
|
||||
* This is the version of the header to use when the MRG_RXBUF
|
||||
* feature has been negotiated.
|
||||
*/
|
||||
struct virtio_net_hdr_mrg_rxbuf {
|
||||
struct virtio_net_hdr hdr;
|
||||
__virtio16 num_buffers; /* Number of merged rx buffers */
|
||||
};
|
||||
#endif /* ...VIRTIO_NET_NO_LEGACY */
|
||||
|
||||
/*
|
||||
* Control virtqueue data structures
|
||||
*
|
||||
* The control virtqueue expects a header in the first sg entry
|
||||
* and an ack/status response in the last entry. Data for the
|
||||
* command goes in between.
|
||||
*/
|
||||
struct __packed virtio_net_ctrl_hdr {
|
||||
__u8 class;
|
||||
__u8 cmd;
|
||||
};
|
||||
|
||||
typedef __u8 virtio_net_ctrl_ack;
|
||||
|
||||
#define VIRTIO_NET_OK 0
|
||||
#define VIRTIO_NET_ERR 1
|
||||
|
||||
/*
|
||||
* Control the RX mode, ie. promisucous, allmulti, etc...
|
||||
*
|
||||
* All commands require an "out" sg entry containing a 1 byte state value,
|
||||
* zero = disable, non-zero = enable.
|
||||
*
|
||||
* Commands 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
|
||||
* Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
|
||||
*/
|
||||
#define VIRTIO_NET_CTRL_RX 0
|
||||
#define VIRTIO_NET_CTRL_RX_PROMISC 0
|
||||
#define VIRTIO_NET_CTRL_RX_ALLMULTI 1
|
||||
#define VIRTIO_NET_CTRL_RX_ALLUNI 2
|
||||
#define VIRTIO_NET_CTRL_RX_NOMULTI 3
|
||||
#define VIRTIO_NET_CTRL_RX_NOUNI 4
|
||||
#define VIRTIO_NET_CTRL_RX_NOBCAST 5
|
||||
|
||||
/*
|
||||
* Control the MAC
|
||||
*
|
||||
* The MAC filter table is managed by the hypervisor, the guest should assume
|
||||
* the size is infinite. Filtering should be considered non-perfect, ie. based
|
||||
* on hypervisor resources, the guest may received packets from sources not
|
||||
* specified in the filter list.
|
||||
*
|
||||
* In addition to the class/cmd header, the TABLE_SET command requires two
|
||||
* out scatterlists. Each contains a 4 byte count of entries followed by a
|
||||
* concatenated byte stream of the ETH_ALEN MAC addresses. The first sg list
|
||||
* contains unicast addresses, the second is for multicast. This functionality
|
||||
* is present if the VIRTIO_NET_F_CTRL_RX feature is available.
|
||||
*
|
||||
* The ADDR_SET command requests one out scatterlist, it contains a 6 bytes MAC
|
||||
* address. This functionality is present if the VIRTIO_NET_F_CTRL_MAC_ADDR
|
||||
* feature is available.
|
||||
*/
|
||||
struct __packed virtio_net_ctrl_mac {
|
||||
__virtio32 entries;
|
||||
__u8 macs[][ETH_ALEN];
|
||||
};
|
||||
|
||||
#define VIRTIO_NET_CTRL_MAC 1
|
||||
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
|
||||
#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
|
||||
|
||||
/*
|
||||
* Control VLAN filtering
|
||||
*
|
||||
* The VLAN filter table is controlled via a simple ADD/DEL interface. VLAN IDs
|
||||
* not added may be filterd by the hypervisor. Del is the opposite of add. Both
|
||||
* commands expect an out entry containing a 2 byte VLAN ID. VLAN filterting is
|
||||
* available with the VIRTIO_NET_F_CTRL_VLAN feature bit.
|
||||
*/
|
||||
#define VIRTIO_NET_CTRL_VLAN 2
|
||||
#define VIRTIO_NET_CTRL_VLAN_ADD 0
|
||||
#define VIRTIO_NET_CTRL_VLAN_DEL 1
|
||||
|
||||
/*
|
||||
* Control link announce acknowledgment
|
||||
*
|
||||
* The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that driver has
|
||||
* recevied the notification; device would clear the VIRTIO_NET_S_ANNOUNCE bit
|
||||
* in the status field after it receives this command.
|
||||
*/
|
||||
#define VIRTIO_NET_CTRL_ANNOUNCE 3
|
||||
#define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
|
||||
|
||||
/*
|
||||
* Control receive flow steering
|
||||
*
|
||||
* The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET enables receive flow steering,
|
||||
* specifying the number of the transmit and receive queues that will be used.
|
||||
* After the command is consumed and acked by the device, the device will not
|
||||
* steer new packets on receive virtqueues other than specified nor read from
|
||||
* transmit virtqueues other than specified. Accordingly, driver should not
|
||||
* transmit new packets on virtqueues other than specified.
|
||||
*/
|
||||
struct virtio_net_ctrl_mq {
|
||||
__virtio16 virtqueue_pairs;
|
||||
};
|
||||
|
||||
#define VIRTIO_NET_CTRL_MQ 4
|
||||
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
|
||||
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
|
||||
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
|
||||
|
||||
/*
|
||||
* Control network offloads
|
||||
*
|
||||
* Reconfigures the network offloads that guest can handle.
|
||||
*
|
||||
* Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit.
|
||||
*
|
||||
* Command data format matches the feature bit mask exactly.
|
||||
*
|
||||
* See VIRTIO_NET_F_GUEST_* for the list of offloads
|
||||
* that can be enabled/disabled.
|
||||
*/
|
||||
#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5
|
||||
#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0
|
||||
|
||||
#endif /* _LINUX_VIRTIO_NET_H */
|
||||
Loading…
Reference in New Issue