brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

arm: Remove mx31pdk board

Browse Source 
DM, OF_CONTROL, DM_SPI and other driver model migration
deadlines are expired for this board.

Remove it.

Acked-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki 2020-07-09 00:22:35 +05:30
parent 5d1281296f
commit f247354708
8 changed files with 0 additions and 409 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/mach-imx/mx3/Kconfig
View File

@ -29,6 +29,5 @@ config MX31_CLK32
Frequency in Hz of the low frequency input clock. Typically
32768 or 32000 Hz.
source "board/freescale/mx31pdk/Kconfig"
endif

15
board/freescale/mx31pdk/Kconfig
View File

@ -1,15 +0,0 @@
if TARGET_MX31PDK
config SYS_BOARD
default "mx31pdk"
config SYS_VENDOR
default "freescale"
config SYS_SOC
default "mx31"
config SYS_CONFIG_NAME
default "mx31pdk"
endif

6
board/freescale/mx31pdk/MAINTAINERS
View File

@ -1,6 +0,0 @@
MX31PDK BOARD
M: Magnus Lilja <lilja.magnus@gmail.com>
S: Maintained
F: board/freescale/mx31pdk/
F: include/configs/mx31pdk.h
F: configs/mx31pdk_defconfig

11
board/freescale/mx31pdk/Makefile
View File

@ -1,11 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifdef CONFIG_SPL_BUILD
obj-y += lowlevel_init.o
endif
obj-y += mx31pdk.o

76
board/freescale/mx31pdk/lowlevel_init.S
View File

@ -1,76 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
*/
#include <config.h>
#include <asm/arch/imx-regs.h>
#include <asm/macro.h>
.globl lowlevel_init
lowlevel_init:
/* Also setup the Peripheral Port Remap register inside the core */
ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */
mcr p15, 0, r0, c15, c2, 4
write32 IPU_CONF, IPU_CONF_DI_EN
write32 CCM_CCMR, CCM_CCMR_SETUP
wait_timer 0x40000
write32 CCM_CCMR, CCM_CCMR_SETUP | CCMR_MPE
write32 CCM_CCMR, (CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS
/* Set up clock to 532MHz */
write32 CCM_PDR0, CCM_PDR0_SETUP_532MHZ
write32 CCM_MPCTL, CCM_MPCTL_SETUP_532MHZ
write32 CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
/* Set up MX31 DDR pins */
write32 IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B, 0
write32 IOMUXC_SW_PAD_CTL_CAS_SDWE_SDCKE0, 0
write32 IOMUXC_SW_PAD_CTL_BCLK_RW_RAS, 0
write32 IOMUXC_SW_PAD_CTL_CS2_CS3_CS4, 0x1000
write32 IOMUXC_SW_PAD_CTL_DQM3_EB0_EB1, 0
write32 IOMUXC_SW_PAD_CTL_DQM0_DQM1_DQM2, 0
write32 IOMUXC_SW_PAD_CTL_SD29_SD30_SD31, 0
write32 IOMUXC_SW_PAD_CTL_SD26_SD27_SD28, 0
write32 IOMUXC_SW_PAD_CTL_SD23_SD24_SD25, 0
write32 IOMUXC_SW_PAD_CTL_SD20_SD21_SD22, 0
write32 IOMUXC_SW_PAD_CTL_SD17_SD18_SD19, 0
write32 IOMUXC_SW_PAD_CTL_SD14_SD15_SD16, 0
write32 IOMUXC_SW_PAD_CTL_SD11_SD12_SD13, 0
write32 IOMUXC_SW_PAD_CTL_SD8_SD9_SD10, 0
write32 IOMUXC_SW_PAD_CTL_SD5_SD6_SD7, 0
write32 IOMUXC_SW_PAD_CTL_SD2_SD3_SD4, 0
write32 IOMUXC_SW_PAD_CTL_SDBA0_SD0_SD1, 0
write32 IOMUXC_SW_PAD_CTL_A24_A25_SDBA1, 0
write32 IOMUXC_SW_PAD_CTL_A21_A22_A23, 0
write32 IOMUXC_SW_PAD_CTL_A18_A19_A20, 0
write32 IOMUXC_SW_PAD_CTL_A15_A16_A17, 0
write32 IOMUXC_SW_PAD_CTL_A12_A13_A14, 0
write32 IOMUXC_SW_PAD_CTL_A10_MA10_A11, 0
write32 IOMUXC_SW_PAD_CTL_A7_A8_A9, 0
write32 IOMUXC_SW_PAD_CTL_A4_A5_A6, 0
write32 IOMUXC_SW_PAD_CTL_A1_A2_A3, 0
write32 IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0, 0
/* Set up MX31 DDR Memory Controller */
write32 WEIM_ESDMISC, ESDMISC_MDDR_SETUP
write32 WEIM_ESDCFG0, ESDCFG0_MDDR_SETUP
/* Perform DDR init sequence */
write32 WEIM_ESDCTL0, ESDCTL_PRECHARGE
write32 CSD0_BASE | 0x0f00, 0x12344321
write32 WEIM_ESDCTL0, ESDCTL_AUTOREFRESH
write32 CSD0_BASE, 0x12344321
write32 CSD0_BASE, 0x12344321
write32 WEIM_ESDCTL0, ESDCTL_LOADMODEREG
write8 CSD0_BASE | 0x00000033, 0xda
write8 CSD0_BASE | 0x01000000, 0xff
write32 WEIM_ESDCTL0, ESDCTL_RW
write32 CSD0_BASE, 0xDEADBEEF
write32 WEIM_ESDMISC, ESDMISC_MDDR_RESET_DL
mov pc, lr

119
board/freescale/mx31pdk/mx31pdk.c
View File

@ -1,119 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
*
* (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*/
#include <common.h>
#include <init.h>
#include <net.h>
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong bootflag)
{
/*
* copy ourselves from where we are running to where we were
* linked at. Use ulong pointers as all addresses involved
* are 4-byte-aligned.
*/
ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
for (dst = start_ptr; dst < end_ptr; dst++)
*dst = *(dst+(run_ptr-link_ptr));
/*
* branch to nand_boot's link-time address.
*/
asm volatile("ldr pc, =nand_boot");
}
#endif
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
int board_early_init_f(void)
{
/* CS5: CPLD incl. network controller */
static const struct mxc_weimcs cs5 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(5, &cs5);
/* Setup UART1 and SPI2 pins */
mx31_uart1_hw_init();
mx31_spi2_hw_init();
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int board_late_init(void)
{
u32 val;
struct pmic *p;
int ret;
ret = pmic_init(CONFIG_FSL_PMIC_BUS);
if (ret)
return ret;
p = pmic_get("FSL_PMIC");
if (!p)
return -ENODEV;
/* Enable RTC battery */
pmic_reg_read(p, REG_POWER_CTL0, &val);
pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI);
#ifdef CONFIG_HW_WATCHDOG
hw_watchdog_init();
#endif
return 0;
}
int checkboard(void)
{
printf("Board: MX31PDK\n");
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}

40
configs/mx31pdk_defconfig
View File

@ -1,40 +0,0 @@
CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_MX31=y
CONFIG_SPL_LDSCRIPT="arch/arm/cpu/u-boot-spl.lds"
CONFIG_SYS_TEXT_BASE=0x87e00000
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x40000
CONFIG_TARGET_MX31PDK=y
CONFIG_SPL_TEXT_BASE=0x87dc0000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x60000
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_NAND_SUPPORT=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_SPI=y
CONFIG_DEFAULT_SPI_BUS=1
CONFIG_DEFAULT_SPI_MODE=4
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_DATE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_MXC_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_MXC=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0xB6000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y

141
include/configs/mx31pdk.h
View File

@ -1,141 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
*
* (C) Copyright 2004
* Texas Instruments.
* Richard Woodruff <r-woodruff2@ti.com>
* Kshitij Gupta <kshitij@ti.com>
*
* Configuration settings for the Freescale i.MX31 PDK board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_SIZE 2048
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
/*
* Hardware drivers
*/
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
/* PMIC Controller */
#define CONFIG_POWER
#define CONFIG_POWER_SPI
#define CONFIG_POWER_FSL
#define CONFIG_FSL_PMIC_BUS 1
#define CONFIG_FSL_PMIC_CS 2
#define CONFIG_FSL_PMIC_CLK 1000000
#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_FSL_PMIC_BITLEN 32
#define CONFIG_RTC_MC13XXX
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
"bootcmd=run bootcmd_net\0" \
"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; " \
"tftpboot 0x81000000 uImage-mx31; bootm\0" \
"prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; " \
"nand erase 0x0 0x40000; " \
"nand write 0x81000000 0x0 0x40000\0"
/*
* Miscellaneous configurable options
*/
/* memtest works on */
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x81000000
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define PHYS_SDRAM_1 CSD0_BASE
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE)
/*
* environment organization
*/
/*
* NAND driver
*/
#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
#define CONFIG_MXC_NAND_HWECC
#define CONFIG_SYS_NAND_LARGEPAGE
/* NAND configuration for the NAND_SPL */
/* Start copying real U-Boot from the second page */
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x3f800
/* Load U-Boot to this address */
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
/* Configuration of lowlevel_init.S (clocks and SDRAM) */
#define CCM_CCMR_SETUP 0x074B0BF5
#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | \
PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | \
PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \
PLL_MFN(12))
#define ESDMISC_MDDR_SETUP 0x00000004
#define ESDMISC_MDDR_RESET_DL 0x0000000c
#define ESDCFG0_MDDR_SETUP 0x006ac73a
#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
ESDCTL_DSIZ(2) | ESDCTL_BL(1))
#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
#define ESDCTL_RW ESDCTL_SETTINGS
#endif /* __CONFIG_H */