Merge branch 'master' of git://git.denx.de/u-boot-arc

This commit is contained in:
Tom Rini 2014-05-27 11:44:19 -04:00
commit f23adc9f21
4 changed files with 154 additions and 0 deletions

View File

@ -0,0 +1,7 @@
#
# (C) Copyright 2014 Pierrick Hascoet, Abilis Systems
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += tb100.o

View File

@ -0,0 +1,23 @@
/*
* (C) Copyright 2014 Pierrick Hascoet, Abilis Systems
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
void reset_cpu(ulong addr)
{
#define CRM_SWRESET 0xff101044
writel(0x1, (void *)CRM_SWRESET);
}
int board_eth_init(bd_t *bis)
{
if (designware_initialize(ETH0_BASE_ADDRESS, 0) >= 0)
return 1;
return 0;
}

View File

@ -47,6 +47,7 @@ Active aarch64 armv8 - armltd vexpress64
Active arc arc700 - synopsys - axs101 - Alexey Brodkin <abrodkin@synopsys.com>
Active arc arc700 - synopsys <none> arcangel4 - Alexey Brodkin <abrodkin@synopsys.com>
Active arc arc700 - synopsys <none> arcangel4-be - Alexey Brodkin <abrodkin@synopsys.com>
Active arc arc700 - abilis - tb100 - Alexey Brodkin <abrodkin@synopsys.com>
Active arm arm1136 - armltd integrator integratorcp_cm1136 integratorcp:CM1136 Linus Walleij <linus.walleij@linaro.org>
Active arm arm1136 mx31 - - imx31_phycore - -
Active arm arm1136 mx31 davedenx - qong - Wolfgang Denk <wd@denx.de>

123
include/configs/tb100.h Normal file
View File

@ -0,0 +1,123 @@
/*
* Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_TB100_H_
#define _CONFIG_TB100_H_
#include <linux/sizes.h>
/*
* CPU configuration
*/
#define CONFIG_ARC700
#define CONFIG_ARC_MMU_VER 3
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_CLK_FREQ 500000000
#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ
/*
* Board configuration
*/
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_ARCH_EARLY_INIT_R
/*
* Memory configuration
*/
#define CONFIG_SYS_TEXT_BASE 0x84000000
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE SZ_128M
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN SZ_128K
#define CONFIG_SYS_BOOTM_LEN SZ_32M
#define CONFIG_SYS_LOAD_ADDR 0x82000000
#define CONFIG_SYS_NO_FLASH
/*
* UART configuration
*/
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK 166666666
#define CONFIG_SYS_NS16550_COM1 0xFF100000
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_BAUDRATE 115200
/*
* Ethernet PHY configuration
*/
#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
/*
* Even though the board houses Realtek RTL8211E PHY
* corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
* In particular "parse_status" reports link is down.
*
* Until Realtek PHY driver is fixed fall back to generic PHY driver
* which implements all required functionality and behaves much more stable.
*
* #define CONFIG_PHY_REALTEK
*
*/
/*
* Ethernet configuration
*/
#define CONFIG_DESIGNWARE_ETH
#define ETH0_BASE_ADDRESS 0xFE100000
#define ETH1_BASE_ADDRESS 0xFE110000
/*
* Command line configuration
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_PING
#define CONFIG_OF_LIBFDT
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 16
/*
* Environment settings
*/
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE SZ_2K
#define CONFIG_ENV_OFFSET 0
/*
* Environment configuration
*/
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTARGS "console=ttyS0,115200n8"
#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
/*
* Console configuration
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT "[tb100]:~# "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#endif /* _CONFIG_TB100_H_ */