Kirkwood: add lschlv2 and lsxhl board support
This patch adds support for both the Linkstation Live (LS-CHLv2) and Linkstation Pro (LS-XHL) by Buffalo. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com>
This commit is contained in:
Michael Walle
Albert ARIBAUD
parent
03c1b04f86
commit
f214a20e7e
|
|
@ -904,6 +904,11 @@ Prafulla Wadaskar <prafulla@marvell.com>
|
|||
rd6281a ARM926EJS (Kirkwood SoC)
|
||||
sheevaplug ARM926EJS (Kirkwood SoC)
|
||||
|
||||
Michael Walle <michael@walle.cc>
|
||||
|
||||
lschlv2 ARM926EJS (Kirkwood SoC)
|
||||
lsxhl ARM926EJS (Kirkwood SoC)
|
||||
|
||||
Tom Warren <twarren@nvidia.com>
|
||||
|
||||
harmony Tegra2 (ARM7 & A9 Dual Core)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,44 @@
|
|||
#
|
||||
# Copyright (c) 2012 Michael Walle
|
||||
# Michael Walle <michael@walle.cc>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
# MA 02110-1301 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS := lsxl.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,229 @@
|
|||
#
|
||||
# Copyright (c) 2012 Michael Walle
|
||||
# Michael Walle <michael@walle.cc>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
# MA 02110-1301 USA
|
||||
#
|
||||
# Refer docs/README.kwimage for more details about how-to configure
|
||||
# and create kirkwood boot image
|
||||
#
|
||||
|
||||
# Boot Media configurations
|
||||
BOOT_FROM spi
|
||||
|
||||
# SOC registers configuration using bootrom header extension
|
||||
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
|
||||
|
||||
# Configure RGMII-0/1 interface pad voltage to 1.8V
|
||||
DATA 0xFFD100E0 0x1B1B1B9B
|
||||
|
||||
# L2 RAM Timing 0
|
||||
DATA 0xFFD20134 0xBBBBBBBB
|
||||
# not further specified in HW manual, timing taken from original vendor port
|
||||
|
||||
# L2 RAM Timing 1
|
||||
DATA 0xFFD20138 0x00BBBBBB
|
||||
# not further specified in HW manual, timing taken from original vendor port
|
||||
|
||||
# DDR Configuration register
|
||||
DATA 0xFFD01400 0x43000618
|
||||
# bit13-0: 0x618, 1560 DDR2 clks refresh rate
|
||||
# bit23-14: 0 required
|
||||
# bit24: 1, enable exit self refresh mode on DDR access
|
||||
# bit25: 1 required
|
||||
# bit29-26: 0 required
|
||||
# bit31-30: 0b01 required
|
||||
|
||||
# DDR Controller Control Low
|
||||
DATA 0xFFD01404 0x39543000
|
||||
# bit3-0: 0 required
|
||||
# bit4: 0, addr/cmd in same cycle
|
||||
# bit5: 0, clk is driven during self refresh, we don't care for APX
|
||||
# bit6: 0, use recommended falling edge of clk for addr/cmd
|
||||
# bit11-7: 0 required
|
||||
# bit12: 1 required
|
||||
# bit13: 1 required
|
||||
# bit14: 0, input buffer always powered up
|
||||
# bit17-15: 0 required
|
||||
# bit18: 1, cpu lock transaction enabled
|
||||
# bit19: 0 required
|
||||
# bit23-20: 5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
|
||||
# bit27-24: 9, CL+4, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
|
||||
# bit30-28: 3 required
|
||||
# bit31: 0, no additional STARTBURST delay
|
||||
|
||||
# DDR Timing (Low)
|
||||
DATA 0xFFD01408 0x3302444F
|
||||
# bit3-0: 0xf, 16 cycle tRAS (tRAS[3-0])
|
||||
# bit7-4: 4, 5 cycle tRCD
|
||||
# bit11-8: 4, 5 cyle tRP
|
||||
# bit15-12: 4, 5 cyle tWR
|
||||
# bit19-16: 2, 3 cyle tWTR
|
||||
# bit20: 0, 16 cycle tRAS (tRAS[4])
|
||||
# bit23-21: 0 required
|
||||
# bit27-24: 3, 4 cycle tRRD
|
||||
# bit31-28: 3, 4 cyle tRTP
|
||||
|
||||
# DDR Timing (High)
|
||||
DATA 0xFFD0140C 0x00000823
|
||||
# bit6-0: 0x23, 35 cycle tRFC
|
||||
# bit8-7: 0, 1 cycle tR2R
|
||||
# bit10-9: 0, 1 cyle tR2W
|
||||
# bit12-11: 1, 2 cylce tW2W
|
||||
# bit31-13: 0 required
|
||||
|
||||
# DDR Address Control
|
||||
DATA 0xFFD01410 0x00000009
|
||||
# bit1-0: 1, Cs0width=x16
|
||||
# bit3-2: 2, Cs0size=512Mbit
|
||||
# bit5-4: 0, Cs1width=nonexistent
|
||||
# bit7-6: 0, Cs1size=nonexistent
|
||||
# bit9-8: 0, Cs2width=nonexistent
|
||||
# bit11-10: 0, Cs2size=nonexistent
|
||||
# bit13-12: 0, Cs3width=nonexistent
|
||||
# bit15-14: 0, Cs3size=nonexistent
|
||||
# bit16: 0, Cs0AddrSel
|
||||
# bit17: 0, Cs1AddrSel
|
||||
# bit18: 0, Cs2AddrSel
|
||||
# bit19: 0, Cs3AddrSel
|
||||
# bit31-20: 0 required
|
||||
|
||||
# DDR Open Pages Control
|
||||
DATA 0xFFD01414 0x00000000
|
||||
# bit0: 0, OPEn=OpenPage enabled
|
||||
# bit31-1: 0 required
|
||||
|
||||
# DDR Operation
|
||||
DATA 0xFFD01418 0x00000000
|
||||
# bit3-0: 0, Cmd=Normal SDRAM Mode
|
||||
# bit31-4: 0 required
|
||||
|
||||
# DDR Mode
|
||||
DATA 0xFFD0141C 0x00000652
|
||||
# bit2-0: 2, Burst Length (2 required)
|
||||
# bit3: 0, Burst Type (0 required)
|
||||
# bit6-4: 5, CAS Latency (CL) 5
|
||||
# bit7: 0, (Test Mode) Normal operation
|
||||
# bit8: 0, (Reset DLL) Normal operation
|
||||
# bit11-9: 3, Write recovery for auto-precharge (3 required)
|
||||
# bit12: 0, Fast Active power down exit time (0 required)
|
||||
# bit31-13: 0 required
|
||||
|
||||
# DDR Extended Mode
|
||||
DATA 0xFFD01420 0x00000042
|
||||
# bit0: 0, DRAM DLL enabled
|
||||
# bit1: 1, DRAM drive strength reduced
|
||||
# bit2: 0, ODT control Rtt[0] (Rtt=2, 150 ohm termination)
|
||||
# bit5-3: 0 required
|
||||
# bit6: 1, ODT control Rtt[1] (Rtt=2, 150 ohm termination)
|
||||
# bit9-7: 0 required
|
||||
# bit10: 0, differential DQS enabled
|
||||
# bit11: 0 required
|
||||
# bit12: 0, DRAM output buffer enabled
|
||||
# bit31-13: 0 required
|
||||
|
||||
# DDR Controller Control High
|
||||
DATA 0xFFD01424 0x0000F17F
|
||||
# bit2-0: 0x7 required
|
||||
# bit3: 1, MBUS Burst Chop disabled
|
||||
# bit6-4: 0x7 required
|
||||
# bit7: 0 required (???)
|
||||
# bit8: 1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
|
||||
# bit9: 0, no half clock cycle addition to dataout
|
||||
# bit10: 0, 1/4 clock cycle skew enabled for addr/ctl signals
|
||||
# bit11: 0, 1/4 clock cycle skew disabled for write mesh
|
||||
# bit15-12: 0xf required
|
||||
# bit31-16: 0 required
|
||||
|
||||
# DDR2 ODT Read Timing (default values)
|
||||
DATA 0xFFD01428 0x00085520
|
||||
# bit3-0: 0 required
|
||||
# bit7-4: 2, 2 cycles from read command to assertion of M_ODT signal
|
||||
# bit11-8: 5, 5 cycles from read command to de-assertion of M_ODT signal
|
||||
# bit15-12: 5, 5 cycles from read command to assertion of internal ODT signal
|
||||
# bit19-16: 8, 8 cycles from read command to de-assertion of internal ODT signal
|
||||
# bit31-20: 0 required
|
||||
|
||||
# DDR2 ODT Write Timing (default values)
|
||||
DATA 0xFFD0147C 0x00008552
|
||||
# bit3-0: 2, 2 cycles from write comand to assertion of M_ODT signal
|
||||
# bit7-4: 5, 5 cycles from write command to de-assertion of M_ODT signal
|
||||
# bit15-12: 5, 5 cycles from write command to assertion of internal ODT signal
|
||||
# bit19-16: 8, 8 cycles from write command to de-assertion of internal ODT signal
|
||||
# bit31-16: 0 required
|
||||
|
||||
# CS[0]n Base address
|
||||
DATA 0xFFD01500 0x00000000
|
||||
# at 0x0
|
||||
|
||||
# CS[0]n Size
|
||||
DATA 0xFFD01504 0x03FFFFF1
|
||||
# bit0: 1, Window enabled
|
||||
# bit1: 0, Write Protect disabled
|
||||
# bit3-2: 0x0, CS0 hit selected
|
||||
# bit23-4: 0xfffff required
|
||||
# bit31-24: 0x03, Size (i.e. 64MB)
|
||||
|
||||
# CS[1]n Size
|
||||
DATA 0xFFD0150C 0x00000000
|
||||
# window disabled
|
||||
|
||||
# CS[2]n Size
|
||||
DATA 0xFFD01514 0x00000000
|
||||
# window disabled
|
||||
|
||||
# CS[3]n Size
|
||||
DATA 0xFFD0151C 0x00000000
|
||||
# window disabled
|
||||
|
||||
# DDR ODT Control (Low)
|
||||
DATA 0xFFD01494 0x003C0000
|
||||
# bit3-0: 0b0000, (read) M_ODT[0] is not asserted during read from DRAM
|
||||
# bit7-4: 0b0000, (read) M_ODT[1] is not asserted during read from DRAM
|
||||
# bit15-8: 0 required
|
||||
# bit19-16: 0b1100, (write) M_ODT[0] is asserted during write to DRAM CS2, CS3
|
||||
# bit23-20: 0b0011, (write) M_ODT[1] is asserted during write to DRAM CS0, CS1
|
||||
# bit31-24: 0 required
|
||||
|
||||
# DDR ODT Control (High)
|
||||
DATA 0xFFD01498 0x00000000
|
||||
# bit1-0: 0, M_ODT[0] assertion is controlled by ODT Control Low register
|
||||
# bit3-2: 0, M_ODT[1] assertion is controlled by ODT Control Low register
|
||||
# bit31-4 0 required
|
||||
|
||||
# CPU ODT Control
|
||||
DATA 0xFFD0149C 0x0000E80F
|
||||
# bit3-0: 0b1111, internal ODT is asserted during read from DRAM bank 0-3
|
||||
# bit7-4: 0b0000, internal ODT is not asserted during write to DRAM bank 0-3
|
||||
# bit9-8: 0, Internal ODT assertion is controlled by fiels
|
||||
# bit11-10: 2, M_DQ, M_DM, and M_DQS I/O buffer ODT 75 ohm
|
||||
# bit13-12: 2, M_STARTBURST_IN I/O buffer ODT 75 ohm
|
||||
# bit14: 1, M_STARTBURST_IN ODT enabled
|
||||
# bit15: 1, DDR IO ODT Unit: Drive ODT calibration values
|
||||
# bit20-16: 0, Pad N channel driving strength for ODT
|
||||
# bit25-21: 0, Pad P channel driving strength for ODT
|
||||
# bit31-26: 0 required
|
||||
|
||||
# DDR Initialization Control
|
||||
DATA 0xFFD01480 0x00000001
|
||||
# bit0: 1, enable DDR init upon this register write
|
||||
# bit31-1: 0, required
|
||||
|
||||
# End of Header extension
|
||||
DATA 0x0 0x0
|
||||
|
|
@ -0,0 +1,229 @@
|
|||
#
|
||||
# Copyright (c) 2012 Michael Walle
|
||||
# Michael Walle <michael@walle.cc>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
# MA 02110-1301 USA
|
||||
#
|
||||
# Refer docs/README.kwimage for more details about how-to configure
|
||||
# and create kirkwood boot image
|
||||
#
|
||||
|
||||
# Boot Media configurations
|
||||
BOOT_FROM spi
|
||||
|
||||
# SOC registers configuration using bootrom header extension
|
||||
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
|
||||
|
||||
# Configure RGMII-0/1 interface pad voltage to 1.8V
|
||||
DATA 0xFFD100E0 0x1B1B9B9B
|
||||
|
||||
# L2 RAM Timing 0
|
||||
DATA 0xFFD20134 0xBBBBBBBB
|
||||
# not further specified in HW manual, timing taken from original vendor port
|
||||
|
||||
# L2 RAM Timing 1
|
||||
DATA 0xFFD20138 0x00BBBBBB
|
||||
# not further specified in HW manual, timing taken from original vendor port
|
||||
|
||||
# DDR Configuration register
|
||||
DATA 0xFFD01400 0x43000618
|
||||
# bit13-0: 0x618, 1560 DDR2 clks refresh rate
|
||||
# bit23-14: 0 required
|
||||
# bit24: 1, enable exit self refresh mode on DDR access
|
||||
# bit25: 1 required
|
||||
# bit29-26: 0 required
|
||||
# bit31-30: 0b01 required
|
||||
|
||||
# DDR Controller Control Low
|
||||
DATA 0xFFD01404 0x39543010
|
||||
# bit3-0: 0 required
|
||||
# bit4: 1, T2 mode, addr/cmd are driven for two cycles
|
||||
# bit5: 0, clk is driven during self refresh, we don't care for APX
|
||||
# bit6: 0, use recommended falling edge of clk for addr/cmd
|
||||
# bit11-7: 0 required
|
||||
# bit12: 1 required
|
||||
# bit13: 1 required
|
||||
# bit14: 0, input buffer always powered up
|
||||
# bit17-15: 0 required
|
||||
# bit18: 1, cpu lock transaction enabled
|
||||
# bit19: 0 required
|
||||
# bit23-20: 5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
|
||||
# bit27-24: 9, CL+4, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
|
||||
# bit30-28: 3 required
|
||||
# bit31: 0, no additional STARTBURST delay
|
||||
|
||||
# DDR Timing (Low)
|
||||
DATA 0xFFD01408 0x22125441
|
||||
# bit3-0: 0x1, 18 cycle tRAS (tRAS[3-0])
|
||||
# bit7-4: 4, 5 cycle tRCD
|
||||
# bit11-8: 4, 5 cyle tRP
|
||||
# bit15-12: 5, 6 cyle tWR
|
||||
# bit19-16: 2, 3 cyle tWTR
|
||||
# bit20: 1, 18 cycle tRAS (tRAS[4])
|
||||
# bit23-21: 0 required
|
||||
# bit27-24: 2, 3 cycle tRRD
|
||||
# bit31-28: 2, 3 cyle tRTP
|
||||
|
||||
# DDR Timing (High)
|
||||
DATA 0xFFD0140C 0x00000832
|
||||
# bit6-0: 0x32, 50 cycle tRFC
|
||||
# bit8-7: 0, 1 cycle tR2R
|
||||
# bit10-9: 0, 1 cyle tR2W
|
||||
# bit12-11: 1, 2 cylce tW2W
|
||||
# bit31-13: 0 required
|
||||
|
||||
# DDR Address Control
|
||||
DATA 0xFFD01410 0x0000000C
|
||||
# bit1-0: 0, Cs0width=x8
|
||||
# bit3-2: 3, Cs0size=1Gbit
|
||||
# bit5-4: 0, Cs1width=nonexistent
|
||||
# bit7-6: 0, Cs1size=nonexistent
|
||||
# bit9-8: 0, Cs2width=nonexistent
|
||||
# bit11-10: 0, Cs2size=nonexistent
|
||||
# bit13-12: 0, Cs3width=nonexistent
|
||||
# bit15-14: 0, Cs3size=nonexistent
|
||||
# bit16: 0, Cs0AddrSel
|
||||
# bit17: 0, Cs1AddrSel
|
||||
# bit18: 0, Cs2AddrSel
|
||||
# bit19: 0, Cs3AddrSel
|
||||
# bit31-20: 0 required
|
||||
|
||||
# DDR Open Pages Control
|
||||
DATA 0xFFD01414 0x00000000
|
||||
# bit0: 0, OPEn=OpenPage enabled
|
||||
# bit31-1: 0 required
|
||||
|
||||
# DDR Operation
|
||||
DATA 0xFFD01418 0x00000000
|
||||
# bit3-0: 0, Cmd=Normal SDRAM Mode
|
||||
# bit31-4: 0 required
|
||||
|
||||
# DDR Mode
|
||||
DATA 0xFFD0141C 0x00000652
|
||||
# bit2-0: 2, Burst Length (2 required)
|
||||
# bit3: 0, Burst Type (0 required)
|
||||
# bit6-4: 5, CAS Latency (CL) 5
|
||||
# bit7: 0, (Test Mode) Normal operation
|
||||
# bit8: 0, (Reset DLL) Normal operation
|
||||
# bit11-9: 3, Write recovery for auto-precharge (3 required)
|
||||
# bit12: 0, Fast Active power down exit time (0 required)
|
||||
# bit31-13: 0 required
|
||||
|
||||
# DDR Extended Mode
|
||||
DATA 0xFFD01420 0x00000006
|
||||
# bit0: 0, DRAM DLL enabled
|
||||
# bit1: 1, DRAM drive strength reduced
|
||||
# bit2: 1, ODT control Rtt[0] (Rtt=1, 75 ohm termination)
|
||||
# bit5-3: 0 required
|
||||
# bit6: 0, ODT control Rtt[1] (Rtt=1, 75 ohm termination)
|
||||
# bit9-7: 0 required
|
||||
# bit10: 0, differential DQS enabled
|
||||
# bit11: 0 required
|
||||
# bit12: 0, DRAM output buffer enabled
|
||||
# bit31-13: 0 required
|
||||
|
||||
# DDR Controller Control High
|
||||
DATA 0xFFD01424 0x0000F17F
|
||||
# bit2-0: 0x7 required
|
||||
# bit3: 1, MBUS Burst Chop disabled
|
||||
# bit6-4: 0x7 required
|
||||
# bit7: 0 required (???)
|
||||
# bit8: 1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
|
||||
# bit9: 0, no half clock cycle addition to dataout
|
||||
# bit10: 0, 1/4 clock cycle skew enabled for addr/ctl signals
|
||||
# bit11: 0, 1/4 clock cycle skew disabled for write mesh
|
||||
# bit15-12: 0xf required
|
||||
# bit31-16: 0 required
|
||||
|
||||
# DDR2 ODT Read Timing (default values)
|
||||
DATA 0xFFD01428 0x00085520
|
||||
# bit3-0: 0 required
|
||||
# bit7-4: 2, 2 cycles from read command to assertion of M_ODT signal
|
||||
# bit11-8: 5, 5 cycles from read command to de-assertion of M_ODT signal
|
||||
# bit15-12: 5, 5 cycles from read command to assertion of internal ODT signal
|
||||
# bit19-16: 8, 8 cycles from read command to de-assertion of internal ODT signal
|
||||
# bit31-20: 0 required
|
||||
|
||||
# DDR2 ODT Write Timing (default values)
|
||||
DATA 0xFFD0147C 0x00008552
|
||||
# bit3-0: 2, 2 cycles from write comand to assertion of M_ODT signal
|
||||
# bit7-4: 5, 5 cycles from write command to de-assertion of M_ODT signal
|
||||
# bit15-12: 5, 5 cycles from write command to assertion of internal ODT signal
|
||||
# bit19-16: 8, 8 cycles from write command to de-assertion of internal ODT signal
|
||||
# bit31-16: 0 required
|
||||
|
||||
# CS[0]n Base address
|
||||
DATA 0xFFD01500 0x00000000
|
||||
# at 0x0
|
||||
|
||||
# CS[0]n Size
|
||||
DATA 0xFFD01504 0x0FFFFFF1
|
||||
# bit0: 1, Window enabled
|
||||
# bit1: 0, Write Protect disabled
|
||||
# bit3-2: 0x0, CS0 hit selected
|
||||
# bit23-4: 0xfffff required
|
||||
# bit31-24: 0x0f, Size (i.e. 256MB)
|
||||
|
||||
# CS[1]n Size
|
||||
DATA 0xFFD0150C 0x00000000
|
||||
# window disabled
|
||||
|
||||
# CS[2]n Size
|
||||
DATA 0xFFD01514 0x00000000
|
||||
# window disabled
|
||||
|
||||
# CS[3]n Size
|
||||
DATA 0xFFD0151C 0x00000000
|
||||
# window disabled
|
||||
|
||||
# DDR ODT Control (Low)
|
||||
DATA 0xFFD01494 0x00010000
|
||||
# bit3-0: 0b0000, (read) M_ODT[0] is not asserted during read from DRAM
|
||||
# bit7-4: 0b0000, (read) M_ODT[1] is not asserted during read from DRAM
|
||||
# bit15-8: 0 required
|
||||
# bit19-16: 0b0001, (write) M_ODT[0] is asserted during write to DRAM CS0
|
||||
# bit23-20: 0b0000, (write) M_ODT[1] is not asserted during write to DRAM
|
||||
# bit31-24: 0 required
|
||||
|
||||
# DDR ODT Control (High)
|
||||
DATA 0xFFD01498 0x00000000
|
||||
# bit1-0: 0, M_ODT[0] assertion is controlled by ODT Control Low register
|
||||
# bit3-2: 0, M_ODT[1] assertion is controlled by ODT Control Low register
|
||||
# bit31-4 0 required
|
||||
|
||||
# CPU ODT Control
|
||||
DATA 0xFFD0149C 0x0000E80F
|
||||
# bit3-0: 0b1111, internal ODT is asserted during read from DRAM bank 0-3
|
||||
# bit7-4: 0b0000, internal ODT is not asserted during write to DRAM bank 0-3
|
||||
# bit9-8: 0, Internal ODT assertion is controlled by fiels
|
||||
# bit11-10: 2, M_DQ, M_DM, and M_DQS I/O buffer ODT 75 ohm
|
||||
# bit13-12: 2, M_STARTBURST_IN I/O buffer ODT 75 ohm
|
||||
# bit14: 1, M_STARTBURST_IN ODT enabled
|
||||
# bit15: 1, DDR IO ODT Unit: Drive ODT calibration values
|
||||
# bit20-16: 0, Pad N channel driving strength for ODT
|
||||
# bit25-21: 0, Pad P channel driving strength for ODT
|
||||
# bit31-26: 0 required
|
||||
|
||||
# DDR Initialization Control
|
||||
DATA 0xFFD01480 0x00000001
|
||||
# bit0: 1, enable DDR init upon this register write
|
||||
# bit31-1: 0, required
|
||||
|
||||
# End of Header extension
|
||||
DATA 0x0 0x0
|
||||
|
|
@ -0,0 +1,283 @@
|
|||
/*
|
||||
* Copyright (c) 2012 Michael Walle
|
||||
* Michael Walle <michael@walle.cc>
|
||||
*
|
||||
* Based on sheevaplug/sheevaplug.c by
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <net.h>
|
||||
#include <malloc.h>
|
||||
#include <netdev.h>
|
||||
#include <miiphy.h>
|
||||
#include <asm/arch/kirkwood.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/mpp.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <spi_flash.h>
|
||||
|
||||
#include "lsxl.h"
|
||||
|
||||
/*
|
||||
* Rescue mode
|
||||
*
|
||||
* Selected by holding the push button for 3 seconds, while powering on
|
||||
* the device.
|
||||
*
|
||||
* These linkstations don't have a (populated) serial port. There is no
|
||||
* way to access an (unmodified) board other than using the netconsole. If
|
||||
* you want to recover from a bad environment setting or an empty environment,
|
||||
* you can do this only with a working network connection. Therefore, a random
|
||||
* ethernet address is generated if none is set and a DHCP request is sent.
|
||||
* After a successful DHCP response is received, the network settings are
|
||||
* configured and the ncip parameter is set to the serverip. Eg. for a working
|
||||
* resuce mode, you should set 'next-server' to the host where the netconsole
|
||||
* client is started.
|
||||
* Additionally, the bootsource is set to 'rescue'.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_ENV_OVERWRITE
|
||||
# error "You need to set CONFIG_ENV_OVERWRITE"
|
||||
#endif
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/*
|
||||
* default gpio configuration
|
||||
* There are maximum 64 gpios controlled through 2 sets of registers
|
||||
* the below configuration configures mainly initial LED status
|
||||
*/
|
||||
kw_config_gpio(LSXL_OE_VAL_LOW,
|
||||
LSXL_OE_VAL_HIGH,
|
||||
LSXL_OE_LOW, LSXL_OE_HIGH);
|
||||
|
||||
/*
|
||||
* Multi-Purpose Pins Functionality configuration
|
||||
* These strappings are taken from the original vendor uboot port.
|
||||
*/
|
||||
u32 kwmpp_config[] = {
|
||||
MPP0_SPI_SCn,
|
||||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP4_UART0_RXD,
|
||||
MPP5_UART0_TXD,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO,
|
||||
MPP8_GPIO,
|
||||
MPP9_GPIO,
|
||||
MPP10_GPO, /* HDD power */
|
||||
MPP11_GPIO, /* USB Vbus enable */
|
||||
MPP12_SD_CLK,
|
||||
MPP13_SD_CMD,
|
||||
MPP14_SD_D0,
|
||||
MPP15_SD_D1,
|
||||
MPP16_SD_D2,
|
||||
MPP17_SD_D3,
|
||||
MPP18_GPO, /* fan speed high */
|
||||
MPP19_GPO, /* fan speed low */
|
||||
MPP20_GE1_0,
|
||||
MPP21_GE1_1,
|
||||
MPP22_GE1_2,
|
||||
MPP23_GE1_3,
|
||||
MPP24_GE1_4,
|
||||
MPP25_GE1_5,
|
||||
MPP26_GE1_6,
|
||||
MPP27_GE1_7,
|
||||
MPP28_GPIO,
|
||||
MPP29_GPIO,
|
||||
MPP30_GE1_10,
|
||||
MPP31_GE1_11,
|
||||
MPP32_GE1_12,
|
||||
MPP33_GE1_13,
|
||||
MPP34_GPIO,
|
||||
MPP35_GPIO,
|
||||
MPP36_GPIO, /* function LED */
|
||||
MPP37_GPIO, /* alarm LED */
|
||||
MPP38_GPIO, /* info LED */
|
||||
MPP39_GPIO, /* power LED */
|
||||
MPP40_GPIO, /* fan alarm */
|
||||
MPP41_GPIO, /* funtion button */
|
||||
MPP42_GPIO, /* power switch */
|
||||
MPP43_GPIO, /* power auto switch */
|
||||
MPP44_GPIO,
|
||||
MPP45_GPIO,
|
||||
MPP46_GPIO,
|
||||
MPP47_GPIO,
|
||||
MPP48_GPIO, /* function red LED */
|
||||
MPP49_GPIO,
|
||||
0
|
||||
};
|
||||
|
||||
kirkwood_mpp_conf(kwmpp_config, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define LED_OFF 0
|
||||
#define LED_ALARM_ON 1
|
||||
#define LED_ALARM_BLINKING 2
|
||||
#define LED_POWER_ON 3
|
||||
#define LED_POWER_BLINKING 4
|
||||
#define LED_INFO_ON 5
|
||||
#define LED_INFO_BLINKING 6
|
||||
|
||||
static void __set_led(int blink_alarm, int blink_info, int blink_power,
|
||||
int value_alarm, int value_info, int value_power)
|
||||
{
|
||||
kw_gpio_set_blink(GPIO_ALARM_LED, blink_alarm);
|
||||
kw_gpio_set_blink(GPIO_INFO_LED, blink_info);
|
||||
kw_gpio_set_blink(GPIO_POWER_LED, blink_power);
|
||||
kw_gpio_set_value(GPIO_ALARM_LED, value_alarm);
|
||||
kw_gpio_set_value(GPIO_INFO_LED, value_info);
|
||||
kw_gpio_set_value(GPIO_POWER_LED, value_power);
|
||||
}
|
||||
|
||||
static void set_led(int state)
|
||||
{
|
||||
switch (state) {
|
||||
case LED_OFF:
|
||||
__set_led(0, 0, 0, 0, 0, 0);
|
||||
break;
|
||||
case LED_ALARM_ON:
|
||||
__set_led(0, 0, 0, 0, 1, 1);
|
||||
break;
|
||||
case LED_ALARM_BLINKING:
|
||||
__set_led(1, 0, 0, 1, 1, 1);
|
||||
break;
|
||||
case LED_INFO_ON:
|
||||
__set_led(0, 0, 0, 1, 0, 1);
|
||||
break;
|
||||
case LED_INFO_BLINKING:
|
||||
__set_led(0, 1, 0, 1, 1, 1);
|
||||
break;
|
||||
case LED_POWER_ON:
|
||||
__set_led(0, 0, 0, 1, 1, 0);
|
||||
break;
|
||||
case LED_POWER_BLINKING:
|
||||
__set_led(0, 0, 1, 1, 1, 1);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* address of boot parameters */
|
||||
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
|
||||
|
||||
set_led(LED_POWER_BLINKING);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MISC_INIT_R
|
||||
void check_enetaddr(void)
|
||||
{
|
||||
uchar enetaddr[6];
|
||||
|
||||
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
|
||||
/* signal unset/invalid ethaddr to user */
|
||||
set_led(LED_INFO_BLINKING);
|
||||
}
|
||||
}
|
||||
|
||||
static void erase_environment(void)
|
||||
{
|
||||
struct spi_flash *flash;
|
||||
|
||||
printf("Erasing environment..\n");
|
||||
flash = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
|
||||
if (!flash) {
|
||||
printf("Erasing flash failed\n");
|
||||
return;
|
||||
}
|
||||
|
||||
spi_flash_erase(flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE);
|
||||
spi_flash_free(flash);
|
||||
do_reset(NULL, 0, 0, NULL);
|
||||
}
|
||||
|
||||
static void rescue_mode(void)
|
||||
{
|
||||
uchar enetaddr[6];
|
||||
|
||||
printf("Entering rescue mode..\n");
|
||||
#ifdef CONFIG_RANDOM_MACADDR
|
||||
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
|
||||
eth_random_enetaddr(enetaddr);
|
||||
if (eth_setenv_enetaddr("ethaddr", enetaddr)) {
|
||||
printf("Failed to set ethernet address\n");
|
||||
set_led(LED_ALARM_BLINKING);
|
||||
return;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
setenv("bootsource", "rescue");
|
||||
}
|
||||
|
||||
static void check_push_button(void)
|
||||
{
|
||||
int i = 0;
|
||||
|
||||
while (!kw_gpio_get_value(GPIO_FUNC_BUTTON)) {
|
||||
udelay(100000);
|
||||
i++;
|
||||
|
||||
if (i == 10)
|
||||
set_led(LED_INFO_ON);
|
||||
|
||||
if (i >= 100) {
|
||||
set_led(LED_INFO_BLINKING);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (i >= 100)
|
||||
erase_environment();
|
||||
else if (i >= 10)
|
||||
rescue_mode();
|
||||
}
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
check_enetaddr();
|
||||
check_push_button();
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SHOW_BOOT_PROGRESS
|
||||
void show_boot_progress(int progress)
|
||||
{
|
||||
if (progress > 0)
|
||||
return;
|
||||
|
||||
/* this is not an error, eg. bootp with autoload=no will trigger this */
|
||||
if (progress == -BOOTSTAGE_ID_NET_LOADED)
|
||||
return;
|
||||
|
||||
set_led(LED_ALARM_BLINKING);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -0,0 +1,75 @@
|
|||
/*
|
||||
* Copyright (c) 2012 Michael Walle
|
||||
* Michael Walle <michael@walle.cc>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef __LSXL_H
|
||||
#define __LSXL_H
|
||||
|
||||
#define GPIO_HDD_POWER 10
|
||||
#define GPIO_USB_VBUS 11
|
||||
#define GPIO_FAN_HIGH 18
|
||||
#define GPIO_FAN_LOW 19
|
||||
#define GPIO_FUNC_LED 36
|
||||
#define GPIO_ALARM_LED 37
|
||||
#define GPIO_INFO_LED 38
|
||||
#define GPIO_POWER_LED 39
|
||||
#define GPIO_FAN_LOCK 40
|
||||
#define GPIO_FUNC_BUTTON 41
|
||||
#define GPIO_POWER_SWITCH 42
|
||||
#define GPIO_POWER_AUTO_SWITCH 43
|
||||
#define GPIO_FUNC_RED_LED 48
|
||||
|
||||
#define _BIT(x) (1<<(x))
|
||||
|
||||
#define LSXL_OE_LOW (~(_BIT(GPIO_HDD_POWER) \
|
||||
| _BIT(GPIO_USB_VBUS) \
|
||||
| _BIT(GPIO_FAN_HIGH) \
|
||||
| _BIT(GPIO_FAN_LOW)))
|
||||
|
||||
#define LSXL_OE_HIGH (~(_BIT(GPIO_FUNC_LED - 32) \
|
||||
| _BIT(GPIO_ALARM_LED - 32) \
|
||||
| _BIT(GPIO_INFO_LED - 32) \
|
||||
| _BIT(GPIO_POWER_LED - 32) \
|
||||
| _BIT(GPIO_FUNC_RED_LED - 32)))
|
||||
|
||||
#define LSXL_OE_VAL_LOW (_BIT(GPIO_HDD_POWER) \
|
||||
| _BIT(GPIO_USB_VBUS))
|
||||
|
||||
#define LSXL_OE_VAL_HIGH (_BIT(GPIO_FUNC_LED - 32) \
|
||||
| _BIT(GPIO_ALARM_LED - 32) \
|
||||
| _BIT(GPIO_INFO_LED - 32) \
|
||||
| _BIT(GPIO_POWER_LED - 32) \
|
||||
| _BIT(GPIO_FUNC_RED_LED - 32))
|
||||
|
||||
#define LSXL_POL_VAL_LOW (_BIT(GPIO_FAN_HIGH) \
|
||||
| _BIT(GPIO_FAN_LOW))
|
||||
|
||||
#define LSXL_POL_VAL_HIGH (_BIT(GPIO_FUNC_LED - 32) \
|
||||
| _BIT(GPIO_ALARM_LED - 32) \
|
||||
| _BIT(GPIO_INFO_LED - 32) \
|
||||
| _BIT(GPIO_POWER_LED - 32) \
|
||||
| _BIT(GPIO_FUNC_BUTTON - 32) \
|
||||
| _BIT(GPIO_POWER_SWITCH - 32) \
|
||||
| _BIT(GPIO_POWER_AUTO_SWITCH - 32) \
|
||||
| _BIT(GPIO_FUNC_RED_LED - 32))
|
||||
|
||||
#endif /* __LSXL_H */
|
||||
|
|
@ -138,6 +138,8 @@ enbw_cmc arm arm926ejs enbw_cmc enbw
|
|||
calimain arm arm926ejs calimain omicron davinci
|
||||
pogo_e02 arm arm926ejs - cloudengines kirkwood
|
||||
dns325 arm arm926ejs - d-link kirkwood
|
||||
lschlv2 arm arm926ejs lsxl buffalo kirkwood lsxl:LSCHLV2
|
||||
lsxhl arm arm926ejs lsxl buffalo kirkwood lsxl:LSXHL
|
||||
km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD,KM_DISABLE_PCI
|
||||
km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD_PCI,KM_RECONFIG_XLX
|
||||
mgcoge3un arm arm926ejs km_arm keymile kirkwood
|
||||
|
|
|
|||
|
|
@ -0,0 +1,182 @@
|
|||
/*
|
||||
* Copyright (c) 2012 Michael Walle
|
||||
* Michael Walle <michael@walle.cc>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||
* MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_LSXL_H
|
||||
#define _CONFIG_LSXL_H
|
||||
|
||||
/*
|
||||
* Version number information
|
||||
*/
|
||||
#if defined(CONFIG_LSCHLV2)
|
||||
#define CONFIG_IDENT_STRING " LS-CHLv2"
|
||||
#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
|
||||
#define CONFIG_MACH_TYPE 3006
|
||||
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
|
||||
#elif defined(CONFIG_LSXHL)
|
||||
#define CONFIG_IDENT_STRING " LS-XHL"
|
||||
#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
|
||||
#define CONFIG_MACH_TYPE 2663
|
||||
/* CONFIG_SYS_TCLK is 200000000 by default */
|
||||
#else
|
||||
#error "unknown board"
|
||||
#endif
|
||||
|
||||
/*
|
||||
* General configuration options
|
||||
*/
|
||||
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
||||
#define CONFIG_KIRKWOOD /* SOC Family Name */
|
||||
#define CONFIG_KW88F6281 /* SOC Name */
|
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||
#define CONFIG_MISC_INIT_R
|
||||
#define CONFIG_SHOW_BOOT_PROGRESS
|
||||
|
||||
#define CONFIG_RANDOM_MACADDR
|
||||
#define CONFIG_KIRKWOOD_GPIO
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET
|
||||
|
||||
/*
|
||||
* Enable u-boot API for standalone programs.
|
||||
*/
|
||||
#define CONFIG_API
|
||||
|
||||
/*
|
||||
* Commands configuration
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_ELF
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_IDE
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_CMD_SPI
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_EFI_PARTITION
|
||||
|
||||
/*
|
||||
* mv-common.h should be defined after CMD configs since it used them
|
||||
* to enable certain macros
|
||||
*/
|
||||
#include "mv-common.h"
|
||||
|
||||
/* ST M25P40 */
|
||||
#undef CONFIG_SPI_FLASH_MACRONIX
|
||||
#define CONFIG_SPI_FLASH_STMICRO
|
||||
#undef CONFIG_ENV_SPI_MAX_HZ
|
||||
#define CONFIG_ENV_SPI_MAX_HZ 25000000
|
||||
#undef CONFIG_SF_DEFAULT_SPEED
|
||||
#define CONFIG_SF_DEFAULT_SPEED 25000000
|
||||
|
||||
|
||||
#undef CONFIG_SYS_PROMPT
|
||||
#define CONFIG_SYS_PROMPT "=> "
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
|
||||
/*
|
||||
* Environment variables configurations
|
||||
*/
|
||||
#ifdef CONFIG_SPI_FLASH
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 8
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH 1
|
||||
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
|
||||
#else
|
||||
#define CONFIG_ENV_IS_NOWHERE
|
||||
#endif
|
||||
|
||||
#define CONFIG_ENV_SIZE 0x10000 /* 64k */
|
||||
#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
|
||||
|
||||
/*
|
||||
* Default environment variables
|
||||
*/
|
||||
#define CONFIG_LOADADDR 0x00800000
|
||||
#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"bootsource=hdd\0" \
|
||||
"hdpart=0:1\0" \
|
||||
"bootcmd_net=bootp 0x00100000 uImage " \
|
||||
"&& tftpboot 0x00800000 uInitrd " \
|
||||
"&& bootm 0x00100000 0x00800000\0" \
|
||||
"bootcmd_hdd=ide reset " \
|
||||
"&& ext2load ide ${hdpart} 0x00100000 /uImage " \
|
||||
"&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \
|
||||
"&& bootm 0x00100000 0x00800000\0" \
|
||||
"bootcmd_usb=usb start " \
|
||||
"&& fatload usb 0:1 0x00100000 /uImage " \
|
||||
"&& fatload usb 0:1 0x00800000 /uInitrd " \
|
||||
"&& bootm 0x00100000 0x00800000\0" \
|
||||
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
|
||||
"eraseenv=sf probe 0 " \
|
||||
"&& sf erase " MK_STR(CONFIG_ENV_OFFSET) \
|
||||
" +" MK_STR(CONFIG_ENV_SIZE) "\0" \
|
||||
"config_nc_dhcp=setenv autoload_old ${autoload}; " \
|
||||
"setenv autoload no " \
|
||||
"&& bootp " \
|
||||
"&& setenv ncip ${serverip} " \
|
||||
"&& setenv autoload ${autoload_old}; " \
|
||||
"setenv autoload_old\0" \
|
||||
"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
|
||||
"setenv ncip; setenv gatewayip; setenv ethact; " \
|
||||
"setenv bootfile; setenv dnsip; " \
|
||||
"setenv bootsource hdd; run ser\0" \
|
||||
"restore_env=run standard_env; saveenv; reset\0" \
|
||||
"ser=setenv stdin serial; setenv stdout serial; " \
|
||||
"setenv stderr serial\0" \
|
||||
"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
|
||||
"stdin=serial\0" \
|
||||
"stdout=serial\0" \
|
||||
"stderr=serial\0"
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
|
||||
#define CONFIG_PHY_BASE_ADR 7
|
||||
#undef CONFIG_RESET_PHY_R
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
#ifdef CONFIG_CMD_IDE
|
||||
#undef CONFIG_IDE_LED
|
||||
#undef CONFIG_SYS_IDE_MAXBUS
|
||||
#define CONFIG_SYS_IDE_MAXBUS 1
|
||||
#undef CONFIG_SYS_IDE_MAXDEVICE
|
||||
#define CONFIG_SYS_IDE_MAXDEVICE 1
|
||||
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
||||
#endif
|
||||
|
||||
#endif /* _CONFIG_LSXL_H */
|
||||
Loading…
Reference in New Issue