From f0236b7015283da3d7c9cb9e91b8b94a7e46c5e6 Mon Sep 17 00:00:00 2001 From: MarkLee Date: Fri, 19 Jun 2020 19:17:16 +0800 Subject: [PATCH] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver The sgmii mode init flow is almost the same for all mediatek SoC, the only difference is the register offset(SGMSYS_GEN2_SPEED) is 0x2028 in the old chip(mt7622) but changed to 0x128 for the newer chip(mt7629 and the following chips). Signed-off-by: MarkLee --- drivers/net/mtk_eth.c | 3 ++- drivers/net/mtk_eth.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/mtk_eth.c b/drivers/net/mtk_eth.c index a06a15772c..5183c08e14 100644 --- a/drivers/net/mtk_eth.c +++ b/drivers/net/mtk_eth.c @@ -1094,7 +1094,8 @@ static int mtk_phy_probe(struct udevice *dev) static void mtk_sgmii_init(struct mtk_eth_priv *priv) { /* Set SGMII GEN2 speed(2.5G) */ - clrsetbits_le32(priv->sgmii_base + SGMSYS_GEN2_SPEED, + clrsetbits_le32(priv->sgmii_base + ((priv->soc == SOC_MT7622) ? + SGMSYS_GEN2_SPEED : SGMSYS_GEN2_SPEED_V2), SGMSYS_SPEED_2500, SGMSYS_SPEED_2500); /* Disable SGMII AN */ diff --git a/drivers/net/mtk_eth.h b/drivers/net/mtk_eth.h index be74ac27ea..057ecfaabf 100644 --- a/drivers/net/mtk_eth.h +++ b/drivers/net/mtk_eth.h @@ -46,6 +46,7 @@ #define SGMII_PHYA_PWD BIT(4) #define SGMSYS_GEN2_SPEED 0x2028 +#define SGMSYS_GEN2_SPEED_V2 0x128 #define SGMSYS_SPEED_2500 BIT(2) /* Frame Engine Registers */