m68k: Drop unreferenced CONFIG_* defines

The following config symbols are only defined once and never referenced
anywhere else:

CONFIG_AMCORE
CONFIG_ASTRO5373L
CONFIG_M52277EVB
CONFIG_M5253DEMO
CONFIG_M5253EVBE
CONFIG_M5275EVB
CONFIG_M54418TWR
CONFIG_STMARK2

Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
This commit is contained in:
Tuomas Tynkkynen 2018-01-12 03:11:52 +02:00 committed by Tom Rini
parent 557017386b
commit e6e5ecc5e2
12 changed files with 0 additions and 22 deletions

View File

@ -67,7 +67,6 @@ Changed files:
1.2 Configuration settings for M52277EVB Development Board
CONFIG_MCF5227x -- define for all MCF5227x CPUs
CONFIG_M52277 -- define for all Freescale MCF52277 CPUs
CONFIG_M52277EVB -- define for M52277EVB board
CONFIG_MCFUART -- define to use common CF Uart driver
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2

View File

@ -27,7 +27,6 @@ Created 06/05/2007
3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h
CONFIG_MCF52x2 Processor family
CONFIG_MCF5253 MCF5253 specific
CONFIG_M5253EVBE Amadeus Plus board specific
CONFIG_SYS_CLK Define Amadeus Plus CPU Clock
CONFIG_SYS_MBAR MBAR base address
CONFIG_SYS_MBAR2 MBAR2 base address

View File

@ -63,7 +63,6 @@ Changed files:
1.2 Configuration settings for M54418TWR Development Board
CONFIG_MCF5441x -- define for all MCF5441x CPUs
CONFIG_M54418 -- define for all Freescale MCF54418 CPUs
CONFIG_M54418TWR -- define for M54418TWR board
CONFIG_MCFUART -- define to use common CF Uart driver
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2

View File

@ -18,7 +18,6 @@
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_M52277EVB /* M52277EVB board */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)

View File

@ -7,8 +7,6 @@
#ifndef _M5253DEMO_H
#define _M5253DEMO_H
#define CONFIG_M5253DEMO /* define board type */
#define CONFIG_MCFTMR
#define CONFIG_MCFUART

View File

@ -8,8 +8,6 @@
#ifndef _M5253EVBE_H
#define _M5253EVBE_H
#define CONFIG_M5253EVBE /* define board type */
#define CONFIG_MCFTMR
#define CONFIG_MCFUART

View File

@ -21,7 +21,6 @@
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_M5275EVB /* define board type */
#define CONFIG_MCFTMR

View File

@ -18,7 +18,6 @@
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_M54418TWR /* M54418TWR board */
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)

View File

@ -9,7 +9,6 @@
#ifndef __AMCORE_CONFIG_H
#define __AMCORE_CONFIG_H
#define CONFIG_AMCORE
#define CONFIG_HOSTNAME AMCORE
#define CONFIG_MCFTMR

View File

@ -39,8 +39,6 @@
#error No card type defined!
#endif
#define CONFIG_ASTRO5373L /* define board type */
/* Command line configuration */
/*
* CONFIG_RAM defines if u-boot is loaded via BDM (or started from

View File

@ -9,7 +9,6 @@
#ifndef __STMARK2_CONFIG_H
#define __STMARK2_CONFIG_H
#define CONFIG_STMARK2
#define CONFIG_HOSTNAME stmark2
#define CONFIG_MCFUART

View File

@ -29,7 +29,6 @@ CONFIG_AM335X_USB0_MODE
CONFIG_AM335X_USB1
CONFIG_AM335X_USB1_MODE
CONFIG_AM437X_USB2PHY2_HOST
CONFIG_AMCORE
CONFIG_ANDES_PCU
CONFIG_ANDES_PCU_BASE
CONFIG_APBH_DMA
@ -72,7 +71,6 @@ CONFIG_ARM_PL180_MMCI_BASE
CONFIG_ARM_PL180_MMCI_CLOCK_FREQ
CONFIG_ARM_THUMB
CONFIG_ARP_TIMEOUT
CONFIG_ASTRO5373L
CONFIG_ASTRO_COFDMDUOS2
CONFIG_ASTRO_TWIN7S2
CONFIG_ASTRO_V512
@ -1275,12 +1273,7 @@ CONFIG_LSXHL
CONFIG_LYNXKDI
CONFIG_M41T94_SPI_CS
CONFIG_M520x
CONFIG_M52277EVB
CONFIG_M5253DEMO
CONFIG_M5253EVBE
CONFIG_M5275EVB
CONFIG_M5301x
CONFIG_M54418TWR
CONFIG_M54451EVB
CONFIG_M54455EVB
CONFIG_MACB0_PHY
@ -2165,7 +2158,6 @@ CONFIG_STM32_GPIO
CONFIG_STM32_HSE_HZ
CONFIG_STM32_HZ
CONFIG_STM32_SERIAL
CONFIG_STMARK2
CONFIG_STRIDER
CONFIG_STRIDER_CON
CONFIG_STRIDER_CON_DP