brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

dm: ppc: T4240: add i2c DM support

Browse Source 
This supports i2c DM for SoC T4240

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
This commit is contained in:
Biwen Li 2020-05-01 20:04:17 +08:00 committed by Priyanka Jain
parent 1321aef8cd
commit e6bd72f880
5 changed files with 320 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
arch/powerpc/dts/t4240.dtsi
View File

@ -3,7 +3,7 @@
* T4240 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2013 Freescale Semiconductor Inc.
* Copyright 2019 NXP
* Copyright 2019-2020 NXP
*/
/dts-v1/;
@ -125,6 +125,9 @@
reg = <0x114000 0x1000>;
clock-frequency = <0>;
};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
};
pcie@ffe240000 {

258
board/freescale/common/vsc3316_3308.c
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2020 NXP
*/
#include "vsc3316_3308.h"
@ -32,7 +33,22 @@ int vsc_if_enable(unsigned int vsc_addr)
/* enable 2-wire Serial InterFace (I2C) */
data = 0x02;
#ifdef CONFIG_DM_I2C
int ret, bus_num = 0;
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
return dm_i2c_write(dev, INTERFACE_MODE_REG, &data, 1);
#else
return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
#endif
}
int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
@ -45,6 +61,66 @@ int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
" for Tx\n", vsc_addr);
#ifdef CONFIG_DM_I2C
int bus_num = 0;
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
ret = dm_i2c_read(dev, REVISION_ID_REG, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
vsc_addr);
return ret;
}
if (rev_id != 0xab) {
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
vsc_addr);
return -ENODEV;
}
ret = vsc_if_enable(vsc_addr);
if (ret) {
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
vsc_addr);
return ret;
}
/* config connections - page 0x00 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
/* Making crosspoint connections, by connecting required
* input to output
*/
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][1], con_arr[i][0]);
/* input state - page 0x13 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
/* Configuring the required input of the switch */
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][0], 0x80);
/* Setting Global Input LOS threshold value */
dm_i2c_reg_write(dev, GLOBAL_INPUT_LOS, 0x60);
/* config output mode - page 0x23 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
/* Turn ON the Output driver correspond to required output*/
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][1], 0);
/* configure global core control register, Turn on Global core power */
dm_i2c_reg_write(dev, GLOBAL_CORE_CNTRL, 0);
#else
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
@ -90,6 +166,7 @@ int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
/* configure global core control register, Turn on Global core power */
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
#endif
vsc_wp_config(vsc_addr);
@ -107,6 +184,105 @@ int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
debug("VSC:Initializing VSC3308 at I2C address 0x%x for Tx\n",
vsc_addr);
#ifdef CONFIG_DM_I2C
int bus_num = 0;
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
ret = dm_i2c_read(dev, REVISION_ID_REG, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
vsc_addr);
return ret;
}
if (rev_id != 0xab) {
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
vsc_addr);
return -ENODEV;
}
ret = vsc_if_enable(vsc_addr);
if (ret) {
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
vsc_addr);
return ret;
}
/* config connections - page 0x00 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
/* Configure Global Input ISE */
dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE1, 0);
dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE2, 0);
/* Configure Tx/Rx Global Output PE1 */
dm_i2c_reg_write(dev, GLOBAL_OUTPUT_PE1, 0);
/* Configure Tx/Rx Global Output PE2 */
dm_i2c_reg_write(dev, GLOBAL_OUTPUT_PE2, 0);
/* Configure Tx/Rx Global Input GAIN */
dm_i2c_reg_write(dev, GLOBAL_INPUT_GAIN, 0x3F);
/* Setting Global Input LOS threshold value */
dm_i2c_reg_write(dev, GLOBAL_INPUT_LOS, 0xE0);
/* Setting Global output termination */
dm_i2c_reg_write(dev, GLOBAL_OUTPUT_TERMINATION, 0);
/* Configure Tx/Rx Global Output level */
if (vsc_addr == VSC3308_TX_ADDRESS)
dm_i2c_reg_write(dev, GLOBAL_OUTPUT_LEVEL, 4);
else
dm_i2c_reg_write(dev, GLOBAL_OUTPUT_LEVEL, 2);
/* Making crosspoint connections, by connecting required
* input to output
*/
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][1], con_arr[i][0]);
/* input state - page 0x13 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
/* Turning off all the required input of the switch */
for (i = 0; i < num_con; i++)
dm_i2c_reg_write(dev, con_arr[i][0], 1);
/* only turn on specific Tx/Rx requested by the XFI erratum */
if (vsc_addr == VSC3308_TX_ADDRESS) {
dm_i2c_reg_write(dev, 2, 0);
dm_i2c_reg_write(dev, 3, 0);
} else {
dm_i2c_reg_write(dev, 0, 0);
dm_i2c_reg_write(dev, 1, 0);
}
/* config output mode - page 0x23 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
/* Turn off the Output driver correspond to required output*/
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][1], 1);
/* only turn on specific Tx/Rx requested by the XFI erratum */
if (vsc_addr == VSC3308_TX_ADDRESS) {
dm_i2c_reg_write(dev, 0, 0);
dm_i2c_reg_write(dev, 1, 0);
} else {
dm_i2c_reg_write(dev, 3, 0);
dm_i2c_reg_write(dev, 4, 0);
}
/* configure global core control register, Turn on Global core power */
dm_i2c_reg_write(dev, GLOBAL_CORE_CNTRL, 0);
#else
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
@ -192,7 +368,7 @@ int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
/* configure global core control register, Turn on Global core power */
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
#endif
vsc_wp_config(vsc_addr);
return 0;
@ -208,7 +384,69 @@ int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
debug("VSC:Initializing VSC3308 at I2C address 0x%x"
" for Tx\n", vsc_addr);
#ifdef CONFIG_DM_I2C
int bus_num = 0;
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
ret = dm_i2c_read(dev, REVISION_ID_REG, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
vsc_addr);
return ret;
}
if (rev_id != 0xab) {
printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
vsc_addr);
return -ENODEV;
}
ret = vsc_if_enable(vsc_addr);
if (ret) {
printf("VSC:0x%x could not configured for 2-wire I/F.\n",
vsc_addr);
return ret;
}
/* config connections - page 0x00 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
/* Making crosspoint connections, by connecting required
* input to output
*/
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][1], con_arr[i][0]);
/*Configure Global Input ISE and gain */
dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE1, 0x12);
dm_i2c_reg_write(dev, GLOBAL_INPUT_ISE2, 0x12);
/* input state - page 0x13 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
/* Turning ON the required input of the switch */
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][0], 0);
/* Setting Global Input LOS threshold value */
dm_i2c_reg_write(dev, GLOBAL_INPUT_LOS, 0x60);
/* config output mode - page 0x23 */
dm_i2c_reg_write(dev, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
/* Turn ON the Output driver correspond to required output*/
for (i = 0; i < num_con ; i++)
dm_i2c_reg_write(dev, con_arr[i][1], 0);
/* configure global core control register, Turn on Global core power */
dm_i2c_reg_write(dev, GLOBAL_CORE_CNTRL, 0);
#else
ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
if (ret < 0) {
printf("VSC:0x%x could not read REV_ID from device.\n",
@ -258,7 +496,7 @@ int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
/* configure global core control register, Turn on Global core power */
i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
#endif
vsc_wp_config(vsc_addr);
return 0;
@ -270,6 +508,22 @@ void vsc_wp_config(unsigned int vsc_addr)
/* For new crosspoint configuration to occur, WP bit of
* CORE_CONFIG_REG should be set 1 and then reset to 0 */
#ifdef CONFIG_DM_I2C
int ret, bus_num = 0;
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, vsc_addr,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return;
}
dm_i2c_reg_write(dev, CORE_CONFIG_REG, 0x01);
dm_i2c_reg_write(dev, CORE_CONFIG_REG, 0x0);
#else
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
#endif
}

45
board/freescale/t4qds/t4240qds.c
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2012 Freescale Semiconductor, Inc.
* Copyright 2020 NXP
*/
#include <common.h>
@ -91,11 +92,25 @@ int checkboard(void)
return 0;
}
int select_i2c_ch_pca9547(u8 ch)
int select_i2c_ch_pca9547(u8 ch, int bus_num)
{
int ret;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
ret = dm_i2c_write(dev, 0, &ch, 1);
#else
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
@ -115,10 +130,28 @@ static inline int read_voltage(void)
{
int i, ret, voltage_read = 0;
u16 vol_mon;
#ifdef CONFIG_DM_I2C
struct udevice *dev;
int bus_num = 0;
#endif
for (i = 0; i < NUM_READINGS; i++) {
#ifdef CONFIG_DM_I2C
ret = i2c_get_chip_for_busnum(bus_num, I2C_VOL_MONITOR_ADDR,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
bus_num);
return ret;
}
ret = dm_i2c_read(dev,
I2C_VOL_MONITOR_BUS_V_OFFSET,
(void *)&vol_mon, 2);
#else
ret = i2c_read(I2C_VOL_MONITOR_ADDR,
I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
#endif
if (ret) {
printf("VID: failed to read core voltage\n");
return ret;
@ -250,7 +283,7 @@ static int adjust_vdd(ulong vdd_override)
unsigned voltage;
};
ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR);
ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR, 0);
if (ret) {
debug("VID: I2c failed to switch channel\n");
ret = -1;
@ -348,7 +381,7 @@ int config_frontside_crossbar_vsc3316(void)
u32 srds_prtcl_s1, srds_prtcl_s2;
int ret;
ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS);
ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS, 0);
if (ret)
return ret;
@ -567,7 +600,7 @@ int board_early_init_r(void)
/* Configure board SERDES ports crossbar */
config_frontside_crossbar_vsc3316();
config_backside_crossbar_mux();
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
return 0;
}
@ -732,11 +765,11 @@ void board_detail(void)
}
/* Voltage secion */
if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) {
if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR, 0)) {
vdd = read_voltage();
if (vdd > 0)
printf("Core voltage= %d mV\n", vdd);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
}
printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);

13
include/configs/T4240QDS.h
View File

@ -280,6 +280,19 @@ unsigned long get_board_ddr_clk(void);
#endif
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
#else
#undef CONFIG_SYS_I2C
#undef CONFIG_SYS_FSL_I2C2_OFFSET
#undef CONFIG_SYS_FSL_I2C2_SLAVE
#undef CONFIG_SYS_FSL_I2C2_SPEED
#undef CONFIG_SYS_FSL_I2C_SLAVE
#undef CONFIG_SYS_FSL_I2C_SPEED
#undef CONFIG_SYS_FSL_I2C_OFFSET
#endif
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */
#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */
#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */

9
include/configs/T4240RDB.h
View File

@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Copyright 2020 NXP
*/
/*
@ -159,12 +160,18 @@
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
/* I2C */
#ifndef CONFIG_DM_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
#else
#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
#endif
#define CONFIG_SYS_I2C_FSL
/*
* General PCI