mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTB
This commit enabled support for fitImage on mccmon6 when we switch to DT/DTS (including falcon mode). Signed-off-by: Lukasz Majewski <lukma@denx.de>
This commit is contained in:
Lukasz Majewski
Stefano Babic
parent
a4a16c9181
commit
e4417ed03e
|
|
@ -332,6 +332,13 @@ void board_boot_order(u32 *spl_boot_list)
|
|||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SPL_LOAD_FIT
|
||||
int board_fit_config_name_match(const char *name)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SPL_OS_BOOT
|
||||
int spl_start_uboot(void)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -11,12 +11,18 @@ CONFIG_SPL=y
|
|||
CONFIG_SPL_TEXT_BASE=0x00908000
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_nor.cfg"
|
||||
# CONFIG_USE_BOOTCOMMAND is not set
|
||||
CONFIG_BOUNCE_BUFFER=y
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_NOR_SUPPORT=y
|
||||
CONFIG_SPL_OS_BOOT=y
|
||||
CONFIG_SYS_OS_BASE=0x8180000
|
||||
CONFIG_CMD_SPL=y
|
||||
CONFIG_CMD_SPL_NOR_OFS=0x09600000
|
||||
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
|
||||
CONFIG_CMD_CLK=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
|
|
@ -29,7 +35,7 @@ CONFIG_CMD_REGULATOR=y
|
|||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor),128k@0x1980000(kernel-dtb.nor),128k@0x19C0000(swupdate-kernel-dtb.nor)"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor)"
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx6q-mccmon6"
|
||||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
|
|
|
|||
|
|
@ -12,12 +12,16 @@ CONFIG_SPL=y
|
|||
CONFIG_SPL_TEXT_BASE=0x00908000
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/liebherr/mccmon6/mon6_imximage_sd.cfg"
|
||||
# CONFIG_USE_BOOTCOMMAND is not set
|
||||
CONFIG_BOUNCE_BUFFER=y
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_NOR_SUPPORT=y
|
||||
CONFIG_CMD_SPL=y
|
||||
CONFIG_CMD_SPL_NOR_OFS=0x09600000
|
||||
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
|
||||
CONFIG_CMD_CLK=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
|
|
@ -30,7 +34,7 @@ CONFIG_CMD_REGULATOR=y
|
|||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_MTDPARTS=y
|
||||
CONFIG_MTDIDS_DEFAULT="nor0=8000000.nor"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor),128k@0x1980000(kernel-dtb.nor),128k@0x19C0000(swupdate-kernel-dtb.nor)"
|
||||
CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nor:32m@0x0(mccmon6-image.nor),256k@0x40000(u-boot-env.nor),1m@0x80000(u-boot.nor),8m@0x180000(kernel.nor),8m@0x980000(swupdate-kernel.nor),8m@0x1180000(swupdate-rootfs.nor)"
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx6q-mccmon6"
|
||||
CONFIG_ENV_IS_IN_FLASH=y
|
||||
|
|
|
|||
|
|
@ -14,10 +14,6 @@
|
|||
|
||||
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
|
||||
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
|
||||
#define CONFIG_SPL_OS_BOOT
|
||||
#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + 0x180000)
|
||||
#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + 0x1980000)
|
||||
#define CONFIG_SYS_FDT_SIZE (48 * SZ_1K)
|
||||
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
|
||||
|
||||
/*
|
||||
|
|
@ -28,8 +24,7 @@
|
|||
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
|
||||
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
|
||||
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
|
||||
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
|
||||
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6q-mccmon.dtb"
|
||||
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
||||
|
|
@ -61,14 +56,13 @@
|
|||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"console=ttymxc0,115200 quiet\0" \
|
||||
"fdtfile=imx6q-mccmon6.dtb\0" \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0" \
|
||||
"boot_os=yes\0" \
|
||||
"kernelsize=0x300000\0" \
|
||||
"disable_giga=yes\0" \
|
||||
"download_kernel=" \
|
||||
"tftpboot ${kernel_addr} ${kernel_file};" \
|
||||
"tftpboot ${fdt_addr} ${fdtfile};\0" \
|
||||
"tftpboot ${loadaddr} ${kernel_file};\0" \
|
||||
"get_boot_medium=" \
|
||||
"setenv boot_medium nor;" \
|
||||
"setexpr.l _src_sbmr1 *0x020d8004;" \
|
||||
|
|
@ -76,10 +70,7 @@
|
|||
"if test ${_b_medium} = 40; then " \
|
||||
"setenv boot_medium sdcard;" \
|
||||
"fi\0" \
|
||||
"kernel_file=uImage\0" \
|
||||
"load_kernel=" \
|
||||
"load mmc ${bootdev}:${bootpart} ${kernel_addr} uImage;" \
|
||||
"load mmc ${bootdev}:${bootpart} ${fdt_addr} ${fdtfile};\0" \
|
||||
"kernel_file=fitImage\0" \
|
||||
"boot_sd=" \
|
||||
"echo '#######################';" \
|
||||
"echo '# Factory SDcard Boot #';" \
|
||||
|
|
@ -90,12 +81,11 @@
|
|||
"run factory_flash_img;\0" \
|
||||
"boot_nor=" \
|
||||
"setenv kernelnor 0x08180000;" \
|
||||
"setenv dtbnor 0x09980000;" \
|
||||
"setenv bootargs console=${console} " \
|
||||
CONFIG_MTDPARTS_DEFAULT " " \
|
||||
"root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
|
||||
"cp.l ${dtbnor} ${dtbloadaddr} 0x8000;" \
|
||||
"bootm ${kernelnor} - ${dtbloadaddr};\0" \
|
||||
"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
|
||||
"bootm ${loadaddr};reset;\0" \
|
||||
"boot_recovery=" \
|
||||
"echo '#######################';" \
|
||||
"echo '# RECOVERY SWU Boot #';" \
|
||||
|
|
@ -103,14 +93,13 @@
|
|||
"setenv rootfsloadaddr 0x13000000;" \
|
||||
"setenv swukernelnor 0x08980000;" \
|
||||
"setenv swurootfsnor 0x09180000;" \
|
||||
"setenv swudtbnor 0x099A0000;" \
|
||||
"setenv bootargs console=${console} " \
|
||||
CONFIG_MTDPARTS_DEFAULT " " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}::off root=/dev/ram rw;" \
|
||||
"cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
|
||||
"cp.l ${swudtbnor} ${dtbloadaddr} 0x8000;" \
|
||||
"bootm ${swukernelnor} ${rootfsloadaddr} ${dtbloadaddr};\0" \
|
||||
"cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
|
||||
"bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
|
||||
"boot_tftp=" \
|
||||
"echo '#######################';" \
|
||||
"echo '# TFTP Boot #';" \
|
||||
|
|
@ -118,7 +107,7 @@
|
|||
"if run download_kernel; then " \
|
||||
"setenv bootargs console=${console} " \
|
||||
"root=/dev/mmcblk0p2 rootwait;" \
|
||||
"bootm ${kernel_addr} - ${fdt_addr};" \
|
||||
"bootm $loadaddr};reset;" \
|
||||
"fi\0" \
|
||||
"bootcmd=" \
|
||||
"if test -n ${recovery_status}; then " \
|
||||
|
|
@ -138,13 +127,10 @@
|
|||
"fi;" \
|
||||
"fi\0" \
|
||||
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
||||
"fdt_addr=0x18000000\0" \
|
||||
"bootdev=1\0" \
|
||||
"bootpart=1\0" \
|
||||
"kernel_addr=" __stringify(CONFIG_LOADADDR) "\0" \
|
||||
"netdev=eth0\0" \
|
||||
"load_addr=0x11000000\0" \
|
||||
"dtbloadaddr=0x12000000\0" \
|
||||
"uboot_file=u-boot.img\0" \
|
||||
"SPL_file=SPL\0" \
|
||||
"load_uboot=tftp ${load_addr} ${uboot_file}\0" \
|
||||
|
|
@ -171,6 +157,7 @@
|
|||
"device ${mmcdev};" \
|
||||
"run factory_nor_img;" \
|
||||
"run factory_eMMC_img;" \
|
||||
"run factory_SPL_falcon_setup;" \
|
||||
"fi\0" \
|
||||
"factory_eMMC_img="\
|
||||
"echo 'Update mccmon6 eMMC image'; " \
|
||||
|
|
@ -192,6 +179,16 @@
|
|||
"erase ${nor_bank_start} +${nor_img_size};" \
|
||||
"setexpr nor_img_size ${nor_img_size} / 4; " \
|
||||
"cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
|
||||
"factory_SPL_falcon_setup="\
|
||||
"echo 'Write Falcon boot data'; " \
|
||||
"setenv kernelnor 0x08180000;" \
|
||||
"cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
|
||||
"spl export fdt ${loadaddr};" \
|
||||
"setenv nor_img_addr ${fdtargsaddr};" \
|
||||
"setenv nor_img_size 0x20000;" \
|
||||
"setenv nor_bank_start " \
|
||||
__stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
|
||||
"run nor_update\0" \
|
||||
"tftp_nor_uboot="\
|
||||
"echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
|
||||
"setenv nor_img_file u-boot.img; " \
|
||||
|
|
@ -200,22 +197,14 @@
|
|||
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
|
||||
"run nor_update;" \
|
||||
"fi\0" \
|
||||
"tftp_nor_uImg="\
|
||||
"echo 'Update mccmon6 NOR uImage via TFTP'; " \
|
||||
"setenv nor_img_file uImage; " \
|
||||
"tftp_nor_fitImg="\
|
||||
"echo 'Update mccmon6 NOR fitImage via TFTP'; " \
|
||||
"setenv nor_img_file fitImage; " \
|
||||
"setenv nor_img_size 0x500000; " \
|
||||
"setenv nor_bank_start 0x08180000; " \
|
||||
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
|
||||
"run nor_update;" \
|
||||
"fi\0" \
|
||||
"tftp_nor_dtb="\
|
||||
"echo 'Update mccmon6 NOR DTB via TFTP'; " \
|
||||
"setenv nor_img_file imx6q-mccmon6.dtb; " \
|
||||
"setenv nor_img_size 0x20000; " \
|
||||
"setenv nor_bank_start 0x09980000; " \
|
||||
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
|
||||
"run nor_update;" \
|
||||
"fi\0" \
|
||||
"tftp_nor_img="\
|
||||
"echo 'Update mccmon6 NOR image via TFTP'; " \
|
||||
"if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user