mpc83xx: PCIe: Don't start bus enumeration at 0

Currently we assign first_busno = 0 for the first PCIe hose, but this
scheme won't work if we have ordinary PCI hose already registered (its
first_busno value is 0 too).

The old code worked fine only because we have PCI disabled on
MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92
"mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards").
But on MPC837XERDB boards we have PCI and PCIe, so the bug actually
triggers.

So, to fix the issue, we should use pci_last_busno() + 1 for the
first_busno (i.e. last available busno).

Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
This commit is contained in:
Anton Vorontsov 2009-02-19 18:20:42 +03:00 committed by Kim Phillips
parent cc2a8c7751
commit e2d72ba543

View File

@ -86,7 +86,6 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
{
extern void disable_addr_trans(void); /* start.S */
static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
static int max_bus;
struct pci_controller *hose = &pcie_hose[bus];
int i;
@ -117,7 +116,7 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
hose->regions[i].size = 0x100000;
hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
hose->first_busno = max_bus;
hose->first_busno = pci_last_busno() + 1;
hose->last_busno = 0xff;
if (bus == 0)
@ -145,7 +144,6 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
* Hose scan.
*/
hose->last_busno = pci_hose_scan(hose);
max_bus = hose->last_busno + 1;
}
#else