usb: ehci-hcd: Add IAA handshake for removing async QH

According to EHCI spec, software needs to do handshake with HC for
safely removing QH from async list. This handshake is implemented by
setting IAAD (Interrupt on Async Advance Doorbell) bit in USB_USBCMD
register and poll the IAA (Interrupt on Async Advance bit) in the
USB_USBSTS to ensure the HC has released all on-chip state that may
potentially reference one of the data structures just removed.

Current codes only check active status of the last QTD, but this can't
ensure the QH is released from HC. We can meet unrecoverable
"EHCI timed out on TD" errors when running UEFI SCT tests on USB disk.
The USB_ASYNCLISTADDR register is changed to a invalid address when the
issue happens. It is fixed after adding the IAA handshake.

Steps to reproduce the issue:
1. Build the UEFI SCT from https://github.com/tianocore/edk2-test
2. Build the EDK2 UEFI Shell from https://github.com/tianocore/edk2
3. Copy SCT files and Shell.efi to USB disk FAT partition
4. Load the Shell.efi from USB FAT, and run bootefi to execute it
5. After booting into Shell, enter the SCT directory and run "sct -a"
   to execute all tests.
6. Tests run about 1 hour and stop with many EHCI timeout errors like
   EHCI timed out on TD - token=0x801f8c80

Signed-off-by: Ye Li <ye.li@nxp.com>
This commit is contained in:
Ye Li 2021-03-08 19:26:57 -08:00 committed by Marek Vasut
parent 275a4490fd
commit e1769da17e
2 changed files with 28 additions and 0 deletions

View File

@ -346,6 +346,28 @@ static int ehci_disable_async(struct ehci_ctrl *ctrl)
return ret;
}
static int ehci_iaa_cycle(struct ehci_ctrl *ctrl)
{
u32 cmd, status;
int ret;
/* Enable Interrupt on Async Advance Doorbell. */
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
cmd |= CMD_IAAD;
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
ret = handshake(&ctrl->hcor->or_usbsts, STS_IAA, STS_IAA,
10 * 1000); /* 10ms timeout */
if (ret < 0)
printf("EHCI fail timeout STS_IAA set\n");
status = ehci_readl(&ctrl->hcor->or_usbsts);
if (status & STS_IAA)
ehci_writel(&ctrl->hcor->or_usbsts, STS_IAA);
return ret;
}
static int
ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
@ -631,6 +653,11 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
flush_dcache_range((unsigned long)&ctrl->qh_list,
ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1));
/* Set IAAD, poll IAA */
ret = ehci_iaa_cycle(ctrl);
if (ret)
goto fail;
/*
* Invalidate the memory area occupied by buffer
* Don't try to fix the buffer alignment, if it isn't properly

View File

@ -44,6 +44,7 @@ struct ehci_hcor {
#define STS_ASS (1 << 15)
#define STS_PSS (1 << 14)
#define STS_HALT (1 << 12)
#define STS_IAA (1 << 5)
uint32_t or_usbintr;
#define INTR_UE (1 << 0) /* USB interrupt enable */
#define INTR_UEE (1 << 1) /* USB error interrupt enable */