Exynos5420: Add base patch for SMDK5420

Adding the base patch for Exynos based SMDK5420.
This shall enable compilation and basic boot support for
SMDK5420.

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Rajeshwari Birje 2013-12-26 09:44:24 +05:30 committed by Minkyu Kang
parent 5af4a4f74a
commit e106bd9b9d
8 changed files with 229 additions and 1 deletions

View File

@ -149,6 +149,7 @@ struct cros_ec_dev *board_get_cros_ec_dev(void)
return local.cros_ec_dev;
}
#ifdef CONFIG_CROS_EC
static int board_init_cros_ec_devices(const void *blob)
{
local.cros_ec_err = cros_ec_init(blob, &local.cros_ec_dev);
@ -157,6 +158,7 @@ static int board_init_cros_ec_devices(const void *blob)
return 0;
}
#endif
#if defined(CONFIG_POWER)
#ifdef CONFIG_POWER_MAX77686

View File

@ -0,0 +1,11 @@
#
# Copyright (C) 2013 Samsung Electronics
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += smdk5420_spl.o
ifndef CONFIG_SPL_BUILD
obj-y += smdk5420.o
endif

View File

@ -0,0 +1,159 @@
/*
* Copyright (C) 2013 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <i2c.h>
#include <lcd.h>
#include <spi.h>
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/dp_info.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_EHCI_EXYNOS
static int board_usb_vbus_init(void)
{
struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
samsung_get_base_gpio_part1();
/* Enable VBUS power switch */
s5p_gpio_direction_output(&gpio1->x2, 6, 1);
/* VBUS turn ON time */
mdelay(3);
return 0;
}
#endif
int exynos_init(void)
{
#ifdef CONFIG_USB_EHCI_EXYNOS
board_usb_vbus_init();
#endif
return 0;
}
#ifdef CONFIG_LCD
void cfg_lcd_gpio(void)
{
struct exynos5_gpio_part1 *gpio1 =
(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
/* For Backlight */
s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->b2, 0, 1);
/* LCD power on */
s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->x1, 5, 1);
/* Set Hotplug detect for DP */
s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
}
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 2560,
.vl_row = 1600,
.vl_width = 2560,
.vl_height = 1600,
.vl_clkp = CONFIG_SYS_LOW,
.vl_hsp = CONFIG_SYS_LOW,
.vl_vsp = CONFIG_SYS_LOW,
.vl_dp = CONFIG_SYS_LOW,
.vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */
/* wDP panel timing infomation */
.vl_hspw = 32,
.vl_hbpd = 80,
.vl_hfpd = 48,
.vl_vspw = 6,
.vl_vbpd = 37,
.vl_vfpd = 3,
.vl_cmd_allow_len = 0xf,
.win_id = 3,
.cfg_gpio = cfg_lcd_gpio,
.backlight_on = NULL,
.lcd_power_on = NULL,
.reset_lcd = NULL,
.dual_lcd_enabled = 0,
.init_delay = 0,
.power_on_delay = 0,
.reset_delay = 0,
.interface_mode = FIMD_RGB_INTERFACE,
.dp_enabled = 1,
};
static struct edp_device_info edp_info = {
.disp_info = {
.h_res = 2560,
.h_sync_width = 32,
.h_back_porch = 80,
.h_front_porch = 48,
.v_res = 1600,
.v_sync_width = 6,
.v_back_porch = 37,
.v_front_porch = 3,
.v_sync_rate = 60,
},
.lt_info = {
.lt_status = DP_LT_NONE,
},
.video_info = {
.master_mode = 0,
.bist_mode = DP_DISABLE,
.bist_pattern = NO_PATTERN,
.h_sync_polarity = 0,
.v_sync_polarity = 0,
.interlaced = 0,
.color_space = COLOR_RGB,
.dynamic_range = VESA,
.ycbcr_coeff = COLOR_YCBCR601,
.color_depth = COLOR_8,
},
};
static struct exynos_dp_platform_data dp_platform_data = {
.phy_enable = set_dp_phy_ctrl,
.edp_dev_info = &edp_info,
};
void init_panel_info(vidinfo_t *vid)
{
vid->rgb_mode = MODE_RGB_P;
exynos_set_dp_platform_data(&dp_platform_data);
}
#endif
int board_get_revision(void)
{
return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
const char *board_name;
board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
if (board_name == NULL)
printf("\nUnknown Board\n");
else
printf("\nBoard: %s\n", board_name);
return 0;
}
#endif

View File

@ -0,0 +1,52 @@
/*
* Copyright (C) 2013 The Chromium OS Authors.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/spl.h>
#include <asm/arch/clk.h>
#define SIGNATURE 0xdeadbeef
/* Parameters of early board initialization in SPL */
static struct spl_machine_param machine_param
__attribute__((section(".machine_param"))) = {
.signature = SIGNATURE,
.version = 1,
.params = "vmubfasirM",
.size = sizeof(machine_param),
.mem_iv_size = 0x1f,
.mem_type = DDR_MODE_DDR3,
/*
* Set uboot_size to 0x100000 bytes.
*
* This is an overly conservative value chosen to accommodate all
* possible U-Boot image. You are advised to set this value to a
* smaller realistic size via scripts that modifies the .machine_param
* section of output U-Boot image.
*/
.uboot_size = 0x100000,
.boot_source = BOOT_MODE_OM,
.frequency_mhz = 800,
.arm_freq_mhz = 900,
.serial_base = 0x12c30000,
.i2c_base = 0x12c60000,
.mem_manuf = MEM_MANUF_SAMSUNG,
};
struct spl_machine_param *spl_get_machine_params(void)
{
if (machine_param.signature != SIGNATURE) {
/* Will hang if SIGNATURE dont match */
while (1)
;
}
return &machine_param;
}

View File

@ -276,6 +276,7 @@ Active arm armv7 exynos samsung arndale
Active arm armv7 exynos samsung origen origen - Chander Kashyap <k.chander@samsung.com>
Active arm armv7 exynos samsung smdk5250 smdk5250 - Chander Kashyap <k.chander@samsung.com>
Active arm armv7 exynos samsung smdk5250 snow - Rajeshwari Shinde <rajeshwari.s@samsung.com>
Active arm armv7 exynos samsung smdk5420 smdk5420 - Rajeshwari Shinde <rajeshwari.s@samsung.com>
Active arm armv7 exynos samsung smdkv310 smdkv310 - Chander Kashyap <k.chander@samsung.com>
Active arm armv7 exynos samsung trats trats - Lukasz Majewski <l.majewski@samsung.com>
Active arm armv7 exynos samsung trats2 trats2 - Piotr Wilczek <p.wilczek@samsung.com>

View File

@ -117,6 +117,7 @@
#define CONFIG_USB_STORAGE
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030

View File

@ -155,6 +155,7 @@
#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030

View File

@ -53,6 +53,7 @@ BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
BIN_FILES-y += mkenvimage$(SFX)
BIN_FILES-y += mkimage$(SFX)
BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX)
BIN_FILES-$(CONFIG_EXYNOS5420) += mk$(BOARD)spl$(SFX)
BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
@ -87,7 +88,7 @@ NOPED_OBJ_FILES-y += ublimage.o
OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc.o
OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o
OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o
OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o
OBJ_FILES-$(CONFIG_EXYNOS_SPL) += mkexynosspl.o
OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o
OBJ_FILES-$(CONFIG_LCD_LOGO) += bmp_logo.o
OBJ_FILES-$(CONFIG_MX23) += mxsboot.o