From dd1033e4e0254bd2d19debe433921d9a71bdf674 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 14 Dec 2018 16:16:47 +0100 Subject: [PATCH] MSCC: add support for Ocelot SoCs This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT --- MAINTAINERS | 7 + arch/mips/Kconfig | 6 + arch/mips/Makefile | 1 + arch/mips/mach-mscc/Kconfig | 69 ++ arch/mips/mach-mscc/Makefile | 5 + arch/mips/mach-mscc/cpu.c | 90 +++ arch/mips/mach-mscc/dram.c | 71 ++ arch/mips/mach-mscc/include/ioremap.h | 49 ++ arch/mips/mach-mscc/include/mach/common.h | 24 + arch/mips/mach-mscc/include/mach/ddr.h | 708 ++++++++++++++++++ .../mach-mscc/include/mach/ocelot/ocelot.h | 24 + .../include/mach/ocelot/ocelot_devcpu_gcb.h | 21 + .../include/mach/ocelot/ocelot_icpu_cfg.h | 274 +++++++ arch/mips/mach-mscc/include/mach/tlb.h | 55 ++ arch/mips/mach-mscc/lowlevel_init.S | 23 + arch/mips/mach-mscc/reset.c | 30 + 16 files changed, 1457 insertions(+) create mode 100644 arch/mips/mach-mscc/Kconfig create mode 100644 arch/mips/mach-mscc/Makefile create mode 100644 arch/mips/mach-mscc/cpu.c create mode 100644 arch/mips/mach-mscc/dram.c create mode 100644 arch/mips/mach-mscc/include/ioremap.h create mode 100644 arch/mips/mach-mscc/include/mach/common.h create mode 100644 arch/mips/mach-mscc/include/mach/ddr.h create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot.h create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h create mode 100644 arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h create mode 100644 arch/mips/mach-mscc/include/mach/tlb.h create mode 100644 arch/mips/mach-mscc/lowlevel_init.S create mode 100644 arch/mips/mach-mscc/reset.c diff --git a/MAINTAINERS b/MAINTAINERS index 0fb089807c..9841d0db3e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -512,6 +512,13 @@ S: Maintained T: git git://git.denx.de/u-boot-mips.git F: arch/mips/ +MIPS MSCC +M: Gregory CLEMENT +M: Lars Povlsen +M: Horatiu Vultur +S: Maintained +F: arch/mips/mach-mscc/ + MMC M: Jaehoon Chung S: Maintained diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 355d3b4d91..fe041f0b78 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -59,6 +59,11 @@ config ARCH_ATH79 select OF_CONTROL imply CMD_DM +config ARCH_MSCC + bool "Support MSCC VCore-III" + select OF_CONTROL + select DM + config ARCH_BMIPS bool "Support BMIPS SoCs" select CLK @@ -138,6 +143,7 @@ source "board/imgtec/xilfpga/Kconfig" source "board/micronas/vct/Kconfig" source "board/qemu-mips/Kconfig" source "arch/mips/mach-ath79/Kconfig" +source "arch/mips/mach-mscc/Kconfig" source "arch/mips/mach-bmips/Kconfig" source "arch/mips/mach-pic32/Kconfig" source "arch/mips/mach-mt7620/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 802244a06e..124e93fa26 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -15,6 +15,7 @@ machine-$(CONFIG_ARCH_ATH79) += ath79 machine-$(CONFIG_ARCH_BMIPS) += bmips machine-$(CONFIG_MACH_PIC32) += pic32 machine-$(CONFIG_ARCH_MT7620) += mt7620 +machine-$(CONFIG_ARCH_MSCC) += mscc machdirs := $(patsubst %,arch/mips/mach-%/,$(machine-y)) libs-y += $(machdirs) diff --git a/arch/mips/mach-mscc/Kconfig b/arch/mips/mach-mscc/Kconfig new file mode 100644 index 0000000000..7f1b270207 --- /dev/null +++ b/arch/mips/mach-mscc/Kconfig @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +menu "MSCC VCore-III platforms" + depends on ARCH_MSCC + +config SOC_VCOREIII + select MIPS_TUNE_24KC + select ROM_EXCEPTION_VECTORS + select SUPPORTS_BIG_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_LITTLE_ENDIAN + bool + +config SYS_SOC + default "mscc" + +config SOC_OCELOT + bool + select SOC_VCOREIII + help + This supports MSCC Ocelot family of SOCs. + +config SYS_CONFIG_NAME + default "vcoreiii" + +choice + prompt "Board select" + +config TARGET_OCELOT_PCB120 + bool "MSCC PCB120 Reference Board (aka VSC5635EV)" + select SOC_OCELOT + help + When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to + ocelot_pcb120 + +config TARGET_OCELOT_PCB123 + bool "MSCC PCB123 Reference Board (aka VSC7514EV))" + select SOC_OCELOT + help + When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to + ocelot_pcb123 + +endchoice + +choice + prompt "DDR type" + +config DDRTYPE_H5TQ4G63MFR + bool "Hynix H5TQ4G63MFR-PBC (4Gbit, DDR3-800, 256Mbitx16)" + +config DDRTYPE_MT41K256M16 + bool "Micron MT41K256M16 (4Gbit, DDR3L-800, 256Mbitx16)" + +config DDRTYPE_H5TQ1G63BFA + bool "Hynix H5TQ1G63BFA (1Gbit DDR3, x16)" + +config DDRTYPE_MT41J128M16HA + bool "Micron MT41J128M16HA-15E:D (2Gbit DDR3, x16)" + +config DDRTYPE_MT41K128M16JT + bool "Micron MT41K128M16JT-125 (2Gbit DDR3L, 128Mbitx16)" + +config DDRTYPE_MT47H128M8HQ + bool "Micron MT47H128M8-3 (1Gbit, DDR-533@CL4 @ 4.80ns 16Mbisx8x8)" + +endchoice + +endmenu diff --git a/arch/mips/mach-mscc/Makefile b/arch/mips/mach-mscc/Makefile new file mode 100644 index 0000000000..d14ec33838 --- /dev/null +++ b/arch/mips/mach-mscc/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +CFLAGS_cpu.o += -finline-limit=64000 + +obj-y += cpu.o dram.o reset.o lowlevel_init.o diff --git a/arch/mips/mach-mscc/cpu.c b/arch/mips/mach-mscc/cpu.c new file mode 100644 index 0000000000..b503e1407b --- /dev/null +++ b/arch/mips/mach-mscc/cpu.c @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#include + +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if CONFIG_SYS_SDRAM_SIZE <= SZ_64M +#define MSCC_RAM_TLB_SIZE SZ_64M +#define MSCC_ATTRIB2 MMU_REGIO_INVAL +#elif CONFIG_SYS_SDRAM_SIZE <= SZ_128M +#define MSCC_RAM_TLB_SIZE SZ_64M +#define MSCC_ATTRIB2 MMU_REGIO_RW +#elif CONFIG_SYS_SDRAM_SIZE <= SZ_256M +#define MSCC_RAM_TLB_SIZE SZ_256M +#define MSCC_ATTRIB2 MMU_REGIO_INVAL +#elif CONFIG_SYS_SDRAM_SIZE <= SZ_512M +#define MSCC_RAM_TLB_SIZE SZ_256M +#define MSCC_ATTRIB2 MMU_REGIO_RW +#else +#define MSCC_RAM_TLB_SIZE SZ_512M +#define MSCC_ATTRIB2 MMU_REGIO_RW +#endif + +/* NOTE: lowlevel_init() function does not have access to the + * stack. Thus, all called functions must be inlined, and (any) local + * variables must be kept in registers. + */ +void vcoreiii_tlb_init(void) +{ + register int tlbix = 0; + + /* + * Unlike most of the MIPS based SoCs, the IO register address + * are not in KSEG0. The mainline linux kernel built in legacy + * mode needs to access some of the registers very early in + * the boot and make the assumption that the bootloader has + * already configured them, so we have to match this + * expectation. + */ + create_tlb(tlbix++, MSCC_IO_ORIGIN1_OFFSET, SZ_16M, MMU_REGIO_RW, + MMU_REGIO_RW); + +#if CONFIG_SYS_TEXT_BASE == MSCC_FLASH_TO + /* + * If U-Boot is located in NOR then we want to be able to use + * the data cache in order to boot in a decent duration + */ + create_tlb(tlbix++, MSCC_FLASH_TO, SZ_16M, MMU_REGIO_RO_C, + MMU_REGIO_RO_C); + create_tlb(tlbix++, MSCC_FLASH_TO + SZ_32M, SZ_16M, MMU_REGIO_RO_C, + MMU_REGIO_RO_C); + + /* + * Using cache for RAM also helps to improve boot time. Thanks + * to this the time to relocate U-Boot in RAM went from 2.092 + * secs to 0.104 secs. + */ + create_tlb(tlbix++, MSCC_DDR_TO, MSCC_RAM_TLB_SIZE, MMU_REGIO_RW, + MSCC_ATTRIB2); + + /* Enable caches by clearing the bit ERL, which is set on reset */ + write_c0_status(read_c0_status() & ~BIT(2)); +#endif /* CONFIG_SYS_TEXT_BASE */ +} + +int mach_cpu_init(void) +{ + /* Speed up NOR flash access */ + writel(ICPU_SPI_MST_CFG_CS_DESELECT_TIME(0x19) + + ICPU_SPI_MST_CFG_CLK_DIV(9), BASE_CFG + ICPU_SPI_MST_CFG); + /* + * Legacy and mainline linux kernel expect that the + * interruption map was set as it was done by redboot. + */ + writel(~0, BASE_CFG + ICPU_DST_INTR_MAP(0)); + writel(0, BASE_CFG + ICPU_DST_INTR_MAP(1)); + writel(0, BASE_CFG + ICPU_DST_INTR_MAP(2)); + writel(0, BASE_CFG + ICPU_DST_INTR_MAP(3)); + + return 0; +} diff --git a/arch/mips/mach-mscc/dram.c b/arch/mips/mach-mscc/dram.c new file mode 100644 index 0000000000..5acee6f918 --- /dev/null +++ b/arch/mips/mach-mscc/dram.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#include + +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static inline int vcoreiii_train_bytelane(void) +{ + int ret; + + ret = hal_vcoreiii_train_bytelane(0); + + if (ret) + return ret; + ret = hal_vcoreiii_train_bytelane(1); + + return ret; +} + +int vcoreiii_ddr_init(void) +{ + int res; + + if (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT) + & ICPU_MEMCTRL_STAT_INIT_DONE)) { + hal_vcoreiii_init_memctl(); + hal_vcoreiii_wait_memctl(); + if (hal_vcoreiii_init_dqs() || vcoreiii_train_bytelane()) + hal_vcoreiii_ddr_failed(); + } +#if (CONFIG_SYS_TEXT_BASE != 0x20000000) + res = dram_check(); + if (res == 0) + hal_vcoreiii_ddr_verified(); + else + hal_vcoreiii_ddr_failed(); + + /* Clear boot-mode and read-back to activate/verify */ + clrbits_le32(BASE_CFG + ICPU_GENERAL_CTRL, + ICPU_GENERAL_CTRL_BOOT_MODE_ENA); + readl(BASE_CFG + ICPU_GENERAL_CTRL); +#else + res = 0; +#endif + return res; +} + +int print_cpuinfo(void) +{ + printf("MSCC VCore-III MIPS 24Kec\n"); + + return 0; +} + +int dram_init(void) +{ + while (vcoreiii_ddr_init()) + ; + + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + return 0; +} diff --git a/arch/mips/mach-mscc/include/ioremap.h b/arch/mips/mach-mscc/include/ioremap.h new file mode 100644 index 0000000000..9024364a57 --- /dev/null +++ b/arch/mips/mach-mscc/include/ioremap.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef __ASM_MACH_MSCC_IOREMAP_H +#define __ASM_MACH_MSCC_IOREMAP_H + +#include +#include + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, + phys_addr_t size) +{ + return phys_addr; +} + +static inline int is_vcoreiii_internal_registers(phys_addr_t offset) +{ + if ((offset >= MSCC_IO_ORIGIN1_OFFSET && + offset < (MSCC_IO_ORIGIN1_OFFSET + MSCC_IO_ORIGIN1_SIZE)) || + (offset >= MSCC_IO_ORIGIN2_OFFSET && + offset < (MSCC_IO_ORIGIN2_OFFSET + MSCC_IO_ORIGIN2_SIZE))) + return 1; + + return 0; +} + +static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size, + unsigned long flags) +{ + if (is_vcoreiii_internal_registers(offset)) + return (void __iomem *)offset; + + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return is_vcoreiii_internal_registers((unsigned long)addr); +} + +#define _page_cachable_default _CACHE_CACHABLE_NONCOHERENT + +#endif /* __ASM_MACH_MSCC_IOREMAP_H */ diff --git a/arch/mips/mach-mscc/include/mach/common.h b/arch/mips/mach-mscc/include/mach/common.h new file mode 100644 index 0000000000..842462aeed --- /dev/null +++ b/arch/mips/mach-mscc/include/mach/common.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef __ASM_MACH_COMMON_H +#define __ASM_MACH_COMMON_H + +#if defined(CONFIG_SOC_OCELOT) +#include +#include +#include +#else +#error Unsupported platform +#endif + +#define MSCC_DDR_TO 0x20000000 /* DDR RAM base offset */ +#define MSCC_MEMCTL1_TO 0x40000000 /* SPI/PI base offset */ +#define MSCC_MEMCTL2_TO 0x50000000 /* SPI/PI base offset */ +#define MSCC_FLASH_TO MSCC_MEMCTL1_TO /* Flash base offset */ + +#define VCOREIII_TIMER_DIVIDER 25 /* Clock tick ~ 0.1 us */ + +#endif /* __ASM_MACH_COMMON_H */ diff --git a/arch/mips/mach-mscc/include/mach/ddr.h b/arch/mips/mach-mscc/include/mach/ddr.h new file mode 100644 index 0000000000..262985c8c9 --- /dev/null +++ b/arch/mips/mach-mscc/include/mach/ddr.h @@ -0,0 +1,708 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef __ASM_MACH_DDR_H +#define __ASM_MACH_DDR_H + +#include +#include +#include +#include + +#define MIPS_VCOREIII_MEMORY_DDR3 +#define MIPS_VCOREIII_DDR_SIZE CONFIG_SYS_SDRAM_SIZE + +#if defined(CONFIG_DDRTYPE_H5TQ1G63BFA) /* Serval1 Refboard */ + +/* Hynix H5TQ1G63BFA (1Gbit DDR3, x16) @ 3.20ns */ +#define VC3_MPAR_bank_addr_cnt 3 +#define VC3_MPAR_row_addr_cnt 13 +#define VC3_MPAR_col_addr_cnt 10 +#define VC3_MPAR_tREFI 2437 +#define VC3_MPAR_tRAS_min 12 +#define VC3_MPAR_CL 6 +#define VC3_MPAR_tWTR 4 +#define VC3_MPAR_tRC 16 +#define VC3_MPR_tFAW 16 +#define VC3_MPAR_tRP 5 +#define VC3_MPAR_tRRD 4 +#define VC3_MPAR_tRCD 5 +#define VC3_MPAR_tMRD 4 +#define VC3_MPAR_tRFC 35 +#define VC3_MPAR_CWL 5 +#define VC3_MPAR_tXPR 38 +#define VC3_MPAR_tMOD 12 +#define VC3_MPAR_tDLLK 512 +#define VC3_MPAR_tWR 5 + +#elif defined(CONFIG_DDRTYPE_MT41J128M16HA) /* Validation board */ + +/* Micron MT41J128M16HA-15E:D (2Gbit DDR3, x16) @ 3.20ns */ +#define VC3_MPAR_bank_addr_cnt 3 +#define VC3_MPAR_row_addr_cnt 14 +#define VC3_MPAR_col_addr_cnt 10 +#define VC3_MPAR_tREFI 2437 +#define VC3_MPAR_tRAS_min 12 +#define VC3_MPAR_CL 5 +#define VC3_MPAR_tWTR 4 +#define VC3_MPAR_tRC 16 +#define VC3_MPAR_tFAW 16 +#define VC3_MPAR_tRP 5 +#define VC3_MPAR_tRRD 4 +#define VC3_MPAR_tRCD 5 +#define VC3_MPAR_tMRD 4 +#define VC3_MPAR_tRFC 50 +#define VC3_MPAR_CWL 5 +#define VC3_MPAR_tXPR 54 +#define VC3_MPAR_tMOD 12 +#define VC3_MPAR_tDLLK 512 +#define VC3_MPAR_tWR 5 + +#elif defined(CONFIG_DDRTYPE_MT41K256M16) /* JR2 Validation board */ + +/* Micron MT41K256M16 (4Gbit, DDR3L-800, 256Mbitx16) @ 3.20ns */ +#define VC3_MPAR_bank_addr_cnt 3 +#define VC3_MPAR_row_addr_cnt 15 +#define VC3_MPAR_col_addr_cnt 10 +#define VC3_MPAR_tREFI 2437 +#define VC3_MPAR_tRAS_min 12 +#define VC3_MPAR_CL 5 +#define VC3_MPAR_tWTR 4 +#define VC3_MPAR_tRC 16 +#define VC3_MPAR_tFAW 16 +#define VC3_MPAR_tRP 5 +#define VC3_MPAR_tRRD 4 +#define VC3_MPAR_tRCD 5 +#define VC3_MPAR_tMRD 4 +#define VC3_MPAR_tRFC 82 +#define VC3_MPAR_CWL 5 +#define VC3_MPAR_tXPR 85 +#define VC3_MPAR_tMOD 12 +#define VC3_MPAR_tDLLK 512 +#define VC3_MPAR_tWR 5 + +#elif defined(CONFIG_DDRTYPE_H5TQ4G63MFR) /* JR2 Reference board */ + +/* Hynix H5TQ4G63MFR-PBC (4Gbit, DDR3-800, 256Mbitx16) - 2kb pages @ 3.20ns */ +#define VC3_MPAR_bank_addr_cnt 3 +#define VC3_MPAR_row_addr_cnt 15 +#define VC3_MPAR_col_addr_cnt 10 +#define VC3_MPAR_tREFI 2437 +#define VC3_MPAR_tRAS_min 12 +#define VC3_MPAR_CL 6 +#define VC3_MPAR_tWTR 4 +#define VC3_MPAR_tRC 17 +#define VC3_MPAR_tFAW 16 +#define VC3_MPAR_tRP 5 +#define VC3_MPAR_tRRD 4 +#define VC3_MPAR_tRCD 5 +#define VC3_MPAR_tMRD 4 +#define VC3_MPAR_tRFC 82 +#define VC3_MPAR_CWL 5 +#define VC3_MPAR_tXPR 85 +#define VC3_MPAR_tMOD 12 +#define VC3_MPAR_tDLLK 512 +#define VC3_MPAR_tWR 5 + +#elif defined(CONFIG_DDRTYPE_MT41K128M16JT) + +/* Micron Micron MT41K128M16JT-125 (2Gbit DDR3L, 128Mbitx16) @ 3.20ns */ +#define VC3_MPAR_bank_addr_cnt 3 +#define VC3_MPAR_row_addr_cnt 14 +#define VC3_MPAR_col_addr_cnt 10 +#define VC3_MPAR_tREFI 2437 +#define VC3_MPAR_tRAS_min 12 +#define VC3_MPAR_CL 6 +#define VC3_MPAR_tWTR 4 +#define VC3_MPAR_tRC 16 +#define VC3_MPAR_tFAW 16 +#define VC3_MPAR_tRP 5 +#define VC3_MPAR_tRRD 4 +#define VC3_MPAR_tRCD 5 +#define VC3_MPAR_tMRD 4 +#define VC3_MPAR_tRFC 82 +#define VC3_MPAR_CWL 5 +#define VC3_MPAR_tXPR 85 +#define VC3_MPAR_tMOD 12 +#define VC3_MPAR_tDLLK 512 +#define VC3_MPAR_tWR 5 + +#elif defined(CONFIG_DDRTYPE_MT47H128M8HQ) /* Luton10/26 Refboards */ + +/* Micron 1Gb MT47H128M8-3 16Meg x 8 x 8 banks, DDR-533@CL4 @ 4.80ns */ +#define VC3_MPAR_bank_addr_cnt 3 +#define VC3_MPAR_row_addr_cnt 14 +#define VC3_MPAR_col_addr_cnt 10 +#define VC3_MPAR_tREFI 1625 +#define VC3_MPAR_tRAS_min 9 +#define VC3_MPAR_CL 4 +#define VC3_MPAR_tWTR 2 +#define VC3_MPAR_tRC 12 +#define VC3_MPAR_tFAW 8 +#define VC3_MPAR_tRP 4 +#define VC3_MPAR_tRRD 2 +#define VC3_MPAR_tRCD 4 + +#define VC3_MPAR_tRPA 4 +#define VC3_MPAR_tRP 4 + +#define VC3_MPAR_tMRD 2 +#define VC3_MPAR_tRFC 27 + +#define VC3_MPAR__400_ns_dly 84 + +#define VC3_MPAR_tWR 4 +#undef MIPS_VCOREIII_MEMORY_DDR3 +#else + +#error Unknown DDR system configuration - please add! + +#endif + +#ifdef CONFIG_SOC_OCELOT +#define MIPS_VCOREIII_MEMORY_16BIT 1 +#endif + +#define MIPS_VCOREIII_MEMORY_SSTL_ODT 7 +#define MIPS_VCOREIII_MEMORY_SSTL_DRIVE 7 +#define VCOREIII_DDR_DQS_MODE_CALIBRATE + +#ifdef MIPS_VCOREIII_MEMORY_16BIT +#define VC3_MPAR_16BIT 1 +#else +#define VC3_MPAR_16BIT 0 +#endif + +#ifdef MIPS_VCOREIII_MEMORY_DDR3 +#define VC3_MPAR_DDR3_MODE 1 /* DDR3 */ +#define VC3_MPAR_BURST_LENGTH 8 /* Always 8 (1) for DDR3 */ +#ifdef MIPS_VCOREIII_MEMORY_16BIT +#define VC3_MPAR_BURST_SIZE 1 /* Always 1 for DDR3/16bit */ +#else +#define VC3_MPAR_BURST_SIZE 0 +#endif +#else +#define VC3_MPAR_DDR3_MODE 0 /* DDR2 */ +#ifdef MIPS_VCOREIII_MEMORY_16BIT +#define VC3_MPAR_BURST_LENGTH 4 /* in DDR2 16-bit mode, use burstlen 4 */ +#else +#define VC3_MPAR_BURST_LENGTH 8 /* For 8-bit IF we must run burst-8 */ +#endif +#define VC3_MPAR_BURST_SIZE 0 /* Always 0 for DDR2 */ +#endif + +#define VC3_MPAR_RL VC3_MPAR_CL +#if !defined(MIPS_VCOREIII_MEMORY_DDR3) +#define VC3_MPAR_WL (VC3_MPAR_RL - 1) +#define VC3_MPAR_MD VC3_MPAR_tMRD +#define VC3_MPAR_ID VC3_MPAR__400_ns_dly +#define VC3_MPAR_SD VC3_MPAR_tXSRD +#define VC3_MPAR_OW (VC3_MPAR_WL - 2) +#define VC3_MPAR_OR (VC3_MPAR_WL - 3) +#define VC3_MPAR_RP (VC3_MPAR_bank_addr_cnt < 3 ? VC3_MPAR_tRP : VC3_MPAR_tRPA) +#define VC3_MPAR_FAW (VC3_MPAR_bank_addr_cnt < 3 ? 1 : VC3_MPAR_tFAW) +#define VC3_MPAR_BL (VC3_MPAR_BURST_LENGTH == 4 ? 2 : 4) +#define MSCC_MEMPARM_MR0 \ + (VC3_MPAR_BURST_LENGTH == 8 ? 3 : 2) | (VC3_MPAR_CL << 4) | \ + ((VC3_MPAR_tWR - 1) << 9) +/* DLL-on, Full-OD, AL=0, RTT=off, nDQS-on, RDQS-off, out-en */ +#define MSCC_MEMPARM_MR1 0x382 +#define MSCC_MEMPARM_MR2 0 +#define MSCC_MEMPARM_MR3 0 +#else +#define VC3_MPAR_WL VC3_MPAR_CWL +#define VC3_MPAR_MD VC3_MPAR_tMOD +#define VC3_MPAR_ID VC3_MPAR_tXPR +#define VC3_MPAR_SD VC3_MPAR_tDLLK +#define VC3_MPAR_OW 2 +#define VC3_MPAR_OR 2 +#define VC3_MPAR_RP VC3_MPAR_tRP +#define VC3_MPAR_FAW VC3_MPAR_tFAW +#define VC3_MPAR_BL 4 +#define MSCC_MEMPARM_MR0 ((VC3_MPAR_RL - 4) << 4) | ((VC3_MPAR_tWR - 4) << 9) +/* ODT_RTT: “0x0040” for 120ohm, and “0x0004” for 60ohm. */ +#define MSCC_MEMPARM_MR1 0x0040 +#define MSCC_MEMPARM_MR2 ((VC3_MPAR_WL - 5) << 3) +#define MSCC_MEMPARM_MR3 0 +#endif /* MIPS_VCOREIII_MEMORY_DDR3 */ + +#define MSCC_MEMPARM_MEMCFG \ + ((MIPS_VCOREIII_DDR_SIZE > SZ_512M) ? \ + ICPU_MEMCTRL_CFG_DDR_512MBYTE_PLUS : 0) | \ + (VC3_MPAR_16BIT ? ICPU_MEMCTRL_CFG_DDR_WIDTH : 0) | \ + (VC3_MPAR_DDR3_MODE ? ICPU_MEMCTRL_CFG_DDR_MODE : 0) | \ + (VC3_MPAR_BURST_SIZE ? ICPU_MEMCTRL_CFG_BURST_SIZE : 0) | \ + (VC3_MPAR_BURST_LENGTH == 8 ? ICPU_MEMCTRL_CFG_BURST_LEN : 0) | \ + (VC3_MPAR_bank_addr_cnt == 3 ? ICPU_MEMCTRL_CFG_BANK_CNT : 0) | \ + ICPU_MEMCTRL_CFG_MSB_ROW_ADDR(VC3_MPAR_row_addr_cnt - 1) | \ + ICPU_MEMCTRL_CFG_MSB_COL_ADDR(VC3_MPAR_col_addr_cnt - 1) + +#ifdef CONFIG_SOC_OCELOT +#define MSCC_MEMPARM_PERIOD \ + ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(8) | \ + ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(VC3_MPAR_tREFI) + +#define MSCC_MEMPARM_TIMING0 \ + ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY(VC3_MPAR_RL + VC3_MPAR_BL + 1 - \ + VC3_MPAR_WL) | \ + ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY(VC3_MPAR_BL - 1) | \ + ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY(VC3_MPAR_BL) | \ + ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(VC3_MPAR_tRAS_min - 1) | \ + ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(VC3_MPAR_WL + \ + VC3_MPAR_BL + \ + VC3_MPAR_tWR - 1) | \ + ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(VC3_MPAR_BL - 1) | \ + ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(VC3_MPAR_WL - 1) | \ + ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(VC3_MPAR_RL - 3) + +#define MSCC_MEMPARM_TIMING1 \ + ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(VC3_MPAR_tRC - 1) | \ + ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(VC3_MPAR_FAW - 1) | \ + ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(VC3_MPAR_RP - 1) | \ + ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(VC3_MPAR_tRRD - 1) | \ + ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(VC3_MPAR_tRCD - 1) | \ + ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(VC3_MPAR_WL + \ + VC3_MPAR_BL + \ + VC3_MPAR_tWTR - 1) + +#define MSCC_MEMPARM_TIMING2 \ + ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(VC3_MPAR_RP - 1) | \ + ICPU_MEMCTRL_TIMING2_MDSET_DLY(VC3_MPAR_MD - 1) | \ + ICPU_MEMCTRL_TIMING2_REF_DLY(VC3_MPAR_tRFC - 1) | \ + ICPU_MEMCTRL_TIMING2_INIT_DLY(VC3_MPAR_ID - 1) + +#define MSCC_MEMPARM_TIMING3 \ + ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(VC3_MPAR_WL + \ + VC3_MPAR_tWTR - 1) |\ + ICPU_MEMCTRL_TIMING3_ODT_RD_DLY(VC3_MPAR_OR - 1) | \ + ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(VC3_MPAR_OW - 1) | \ + ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(VC3_MPAR_RL - 3) + +#else +#define MSCC_MEMPARM_PERIOD \ + ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(1) | \ + ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(VC3_MPAR_tREFI) + +#define MSCC_MEMPARM_TIMING0 \ + ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(VC3_MPAR_tRAS_min - 1) | \ + ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(VC3_MPAR_CL + \ + (VC3_MPAR_BURST_LENGTH == 8 ? 2 : 0) + \ + VC3_MPAR_tWR) | \ + ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(VC3_MPAR_BURST_LENGTH == 8 ? 3 : 1) | \ + ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(VC3_MPAR_CL - 3) | \ + ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(VC3_MPAR_CL - 3) + +#define MSCC_MEMPARM_TIMING1 \ + ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(VC3_MPAR_tRC - 1) | \ + ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(VC3_MPAR_tFAW - 1) | \ + ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(VC3_MPAR_tRP - 1) | \ + ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(VC3_MPAR_tRRD - 1) | \ + ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(VC3_MPAR_tRCD - 1) | \ + ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(VC3_MPAR_CL + \ + (VC3_MPAR_BURST_LENGTH == 8 ? 2 : 0) + \ + VC3_MPAR_tWTR) +#define MSCC_MEMPARM_TIMING2 \ + ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(VC3_MPAR_tRPA - 1) | \ + ICPU_MEMCTRL_TIMING2_MDSET_DLY(VC3_MPAR_tMRD - 1) | \ + ICPU_MEMCTRL_TIMING2_REF_DLY(VC3_MPAR_tRFC - 1) | \ + ICPU_MEMCTRL_TIMING2_FOUR_HUNDRED_NS_DLY(VC3_MPAR__400_ns_dly) + +#define MSCC_MEMPARM_TIMING3 \ + ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(VC3_MPAR_CL - 1) | \ + ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(VC3_MPAR_CL - 1) | \ + ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(VC3_MPAR_CL - 1) + +#endif + +enum { + DDR_TRAIN_OK, + DDR_TRAIN_CONTINUE, + DDR_TRAIN_ERROR, +}; + +/* + * We actually have very few 'pause' possibilities apart from + * these assembly nops (at this very early stage). + */ +#define PAUSE() asm volatile("nop; nop; nop; nop; nop; nop; nop; nop") + +/* NB: Assumes inlining as no stack is available! */ +static inline void set_dly(u32 bytelane, u32 dly) +{ + register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)); + + r &= ~ICPU_MEMCTRL_DQS_DLY_DQS_DLY_M; + r |= ICPU_MEMCTRL_DQS_DLY_DQS_DLY(dly); + writel(r, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)); +} + +static inline bool incr_dly(u32 bytelane) +{ + register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)); + + if (ICPU_MEMCTRL_DQS_DLY_DQS_DLY(r) < 31) { + writel(r + 1, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)); + return true; + } + + return false; +} + +static inline bool adjust_dly(int adjust) +{ + register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(0)); + + if (ICPU_MEMCTRL_DQS_DLY_DQS_DLY(r) < 31) { + writel(r + adjust, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(0)); + return true; + } + + return false; +} + +/* NB: Assumes inlining as no stack is available! */ +static inline void center_dly(u32 bytelane, u32 start) +{ + register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)) - start; + + writel(start + (r >> 1), BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)); +} + +static inline void memphy_soft_reset(void) +{ + setbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_FIFO_RST); + PAUSE(); + clrbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_FIFO_RST); + PAUSE(); +} + +#ifdef CONFIG_SOC_OCELOT +static u8 training_data[] = { 0xfe, 0x11, 0x33, 0x55, 0x77, 0x99, 0xbb, 0xdd }; + +static inline void sleep_100ns(u32 val) +{ + /* Set the timer tick generator to 100 ns */ + writel(VCOREIII_TIMER_DIVIDER - 1, BASE_CFG + ICPU_TIMER_TICK_DIV); + + /* Set the timer value */ + writel(val, BASE_CFG + ICPU_TIMER_VALUE(0)); + + /* Enable timer 0 for one-shot */ + writel(ICPU_TIMER_CTRL_ONE_SHOT_ENA | ICPU_TIMER_CTRL_TIMER_ENA, + BASE_CFG + ICPU_TIMER_CTRL(0)); + + /* Wait for timer 0 to reach 0 */ + while (readl(BASE_CFG + ICPU_TIMER_VALUE(0)) != 0) + ; +} + +static inline void hal_vcoreiii_ddr_reset_assert(void) +{ + /* DDR has reset pin on GPIO 19 toggle Low-High to release */ + setbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19)); + writel(BIT(19), BASE_DEVCPU_GCB + PERF_GPIO_OUT_CLR); + sleep_100ns(10000); +} + +static inline void hal_vcoreiii_ddr_reset_release(void) +{ + /* DDR has reset pin on GPIO 19 toggle Low-High to release */ + setbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19)); + writel(BIT(19), BASE_DEVCPU_GCB + PERF_GPIO_OUT_SET); + sleep_100ns(10000); +} + +/* + * DDR memory sanity checking failed, tally and do hard reset + * + * NB: Assumes inlining as no stack is available! + */ +static inline void hal_vcoreiii_ddr_failed(void) +{ + register u32 reset; + + writel(readl(BASE_CFG + ICPU_GPR(6)) + 1, BASE_CFG + ICPU_GPR(6)); + + clrbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19)); + + /* We have to execute the reset function from cache. Indeed, + * the reboot workaround in _machine_restart() will change the + * SPI NOR into SW bitbang. + * + * This will render the CPU unable to execute directly from + * the NOR, which is why the reset instructions are prefetched + * into the I-cache. + * + * When failing the DDR initialization we are executing from + * NOR. + * + * The last instruction in _machine_restart() will reset the + * MIPS CPU (and the cache), and the CPU will start executing + * from the reset vector. + */ + reset = KSEG0ADDR(_machine_restart); + icache_lock((void *)reset, 128); + asm volatile ("jr %0"::"r" (reset)); + + panic("DDR init failed\n"); +} + +/* + * DDR memory sanity checking done, possibly enable ECC. + * + * NB: Assumes inlining as no stack is available! + */ +static inline void hal_vcoreiii_ddr_verified(void) +{ +#ifdef MIPS_VCOREIII_MEMORY_ECC + /* Finally, enable ECC */ + register u32 val = readl(BASE_CFG + ICPU_MEMCTRL_CFG); + + val |= ICPU_MEMCTRL_CFG_DDR_ECC_ERR_ENA; + val &= ~ICPU_MEMCTRL_CFG_BURST_SIZE; + + writel(val, BASE_CFG + ICPU_MEMCTRL_CFG); +#endif + + /* Reset Status register - sticky bits */ + writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT), BASE_CFG + ICPU_MEMCTRL_STAT); +} + +/* NB: Assumes inlining as no stack is available! */ +static inline int look_for(u32 bytelane) +{ + register u32 i; + + /* Reset FIFO in case any previous access failed */ + for (i = 0; i < sizeof(training_data); i++) { + register u32 byte; + + memphy_soft_reset(); + /* Reset sticky bits */ + writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT), + BASE_CFG + ICPU_MEMCTRL_STAT); + /* Read data */ + byte = __raw_readb((void __iomem *)MSCC_DDR_TO + bytelane + + (i * 4)); + + /* + * Prevent the compiler reordering the instruction so + * the read of RAM happens after the check of the + * errors. + */ + rmb(); + if (readl(BASE_CFG + ICPU_MEMCTRL_STAT) & + (ICPU_MEMCTRL_STAT_RDATA_MASKED | + ICPU_MEMCTRL_STAT_RDATA_DUMMY)) { + /* Noise on the line */ + goto read_error; + } + /* If mismatch, increment DQS - if possible */ + if (byte != training_data[i]) { + read_error: + if (!incr_dly(bytelane)) + return DDR_TRAIN_ERROR; + return DDR_TRAIN_CONTINUE; + } + } + return DDR_TRAIN_OK; +} + +/* NB: Assumes inlining as no stack is available! */ +static inline int look_past(u32 bytelane) +{ + register u32 i; + + /* Reset FIFO in case any previous access failed */ + for (i = 0; i < sizeof(training_data); i++) { + register u32 byte; + + memphy_soft_reset(); + /* Ack sticky bits */ + writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT), + BASE_CFG + ICPU_MEMCTRL_STAT); + byte = __raw_readb((void __iomem *)MSCC_DDR_TO + bytelane + + (i * 4)); + /* + * Prevent the compiler reordering the instruction so + * the read of RAM happens after the check of the + * errors. + */ + rmb(); + if (readl(BASE_CFG + ICPU_MEMCTRL_STAT) & + (ICPU_MEMCTRL_STAT_RDATA_MASKED | + ICPU_MEMCTRL_STAT_RDATA_DUMMY)) { + /* Noise on the line */ + goto read_error; + } + /* Bail out when we see first mismatch */ + if (byte != training_data[i]) { + read_error: + return DDR_TRAIN_OK; + } + } + /* All data compares OK, increase DQS and retry */ + if (!incr_dly(bytelane)) + return DDR_TRAIN_ERROR; + + return DDR_TRAIN_CONTINUE; +} + +static inline int hal_vcoreiii_train_bytelane(u32 bytelane) +{ + register int res; + register u32 dqs_s; + + set_dly(bytelane, 0); /* Start training at DQS=0 */ + while ((res = look_for(bytelane)) == DDR_TRAIN_CONTINUE) + ; + if (res != DDR_TRAIN_OK) + return res; + + dqs_s = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)); + while ((res = look_past(bytelane)) == DDR_TRAIN_CONTINUE) + ; + if (res != DDR_TRAIN_OK) + return res; + /* Reset FIFO - for good measure */ + memphy_soft_reset(); + /* Adjust to center [dqs_s;cur] */ + center_dly(bytelane, dqs_s); + return DDR_TRAIN_OK; +} + +/* This algorithm is converted from the TCL training algorithm used + * during silicon simulation. + * NB: Assumes inlining as no stack is available! + */ +static inline int hal_vcoreiii_init_dqs(void) +{ +#define MAX_DQS 32 + register u32 i, j; + + for (i = 0; i < MAX_DQS; i++) { + set_dly(0, i); /* Byte-lane 0 */ + for (j = 0; j < MAX_DQS; j++) { + __maybe_unused register u32 byte; + + set_dly(1, j); /* Byte-lane 1 */ + /* Reset FIFO in case any previous access failed */ + memphy_soft_reset(); + writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT), + BASE_CFG + ICPU_MEMCTRL_STAT); + byte = __raw_readb((void __iomem *)MSCC_DDR_TO); + byte = __raw_readb((void __iomem *)(MSCC_DDR_TO + 1)); + if (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT) & + (ICPU_MEMCTRL_STAT_RDATA_MASKED | + ICPU_MEMCTRL_STAT_RDATA_DUMMY))) + return 0; + } + } + return -1; +} + +static inline int dram_check(void) +{ + register u32 i; + + for (i = 0; i < 8; i++) { + __raw_writel(~i, (void __iomem *)(MSCC_DDR_TO + (i * 4))); + if (__raw_readl((void __iomem *)(MSCC_DDR_TO + (i * 4))) != ~i) + return 1; + } + return 0; +} + +/* + * NB: Called *early* to init memory controller - assumes inlining as + * no stack is available! + */ +static inline void hal_vcoreiii_init_memctl(void) +{ + /* Ensure DDR is in reset */ + hal_vcoreiii_ddr_reset_assert(); + + /* Wait maybe not needed, but ... */ + PAUSE(); + + /* Drop sys ctl memory controller forced reset */ + clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_MEM_RST_FORCE); + + PAUSE(); + + /* Drop Reset, enable SSTL */ + writel(ICPU_MEMPHY_CFG_PHY_SSTL_ENA, BASE_CFG + ICPU_MEMPHY_CFG); + PAUSE(); + + /* Start the automatic SSTL output and ODT drive-strength calibration */ + writel(ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT(MIPS_VCOREIII_MEMORY_SSTL_ODT) | + /* drive strength */ + ICPU_MEMPHY_ZCAL_ZCAL_PROG(MIPS_VCOREIII_MEMORY_SSTL_DRIVE) | + /* Start calibration process */ + ICPU_MEMPHY_ZCAL_ZCAL_ENA, BASE_CFG + ICPU_MEMPHY_ZCAL); + + /* Wait for ZCAL to clear */ + while (readl(BASE_CFG + ICPU_MEMPHY_ZCAL) & ICPU_MEMPHY_ZCAL_ZCAL_ENA) + ; + + /* Check no ZCAL_ERR */ + if (readl(BASE_CFG + ICPU_MEMPHY_ZCAL_STAT) + & ICPU_MEMPHY_ZCAL_STAT_ZCAL_ERR) + hal_vcoreiii_ddr_failed(); + + /* Drive CL, CK, ODT */ + setbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_ODT_OE | + ICPU_MEMPHY_CFG_PHY_CK_OE | ICPU_MEMPHY_CFG_PHY_CL_OE); + + /* Initialize memory controller */ + writel(MSCC_MEMPARM_MEMCFG, BASE_CFG + ICPU_MEMCTRL_CFG); + writel(MSCC_MEMPARM_PERIOD, BASE_CFG + ICPU_MEMCTRL_REF_PERIOD); + + writel(MSCC_MEMPARM_TIMING0, BASE_CFG + ICPU_MEMCTRL_TIMING0); + + writel(MSCC_MEMPARM_TIMING1, BASE_CFG + ICPU_MEMCTRL_TIMING1); + writel(MSCC_MEMPARM_TIMING2, BASE_CFG + ICPU_MEMCTRL_TIMING2); + writel(MSCC_MEMPARM_TIMING3, BASE_CFG + ICPU_MEMCTRL_TIMING3); + writel(MSCC_MEMPARM_MR0, BASE_CFG + ICPU_MEMCTRL_MR0_VAL); + writel(MSCC_MEMPARM_MR1, BASE_CFG + ICPU_MEMCTRL_MR1_VAL); + writel(MSCC_MEMPARM_MR2, BASE_CFG + ICPU_MEMCTRL_MR2_VAL); + writel(MSCC_MEMPARM_MR3, BASE_CFG + ICPU_MEMCTRL_MR3_VAL); + + /* Termination setup - enable ODT */ + writel(ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_ENA | + /* Assert ODT0 for any write */ + ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA(3), + BASE_CFG + ICPU_MEMCTRL_TERMRES_CTRL); + + /* Release Reset from DDR */ + hal_vcoreiii_ddr_reset_release(); + + writel(readl(BASE_CFG + ICPU_GPR(7)) + 1, BASE_CFG + ICPU_GPR(7)); +} + +static inline void hal_vcoreiii_wait_memctl(void) +{ + /* Now, rip it! */ + writel(ICPU_MEMCTRL_CTRL_INITIALIZE, BASE_CFG + ICPU_MEMCTRL_CTRL); + + while (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT) + & ICPU_MEMCTRL_STAT_INIT_DONE)) + ; + + /* Settle...? */ + sleep_100ns(10000); + + /* Establish data contents in DDR RAM for training */ + + __raw_writel(0xcacafefe, ((void __iomem *)MSCC_DDR_TO)); + __raw_writel(0x22221111, ((void __iomem *)MSCC_DDR_TO + 0x4)); + __raw_writel(0x44443333, ((void __iomem *)MSCC_DDR_TO + 0x8)); + __raw_writel(0x66665555, ((void __iomem *)MSCC_DDR_TO + 0xC)); + __raw_writel(0x88887777, ((void __iomem *)MSCC_DDR_TO + 0x10)); + __raw_writel(0xaaaa9999, ((void __iomem *)MSCC_DDR_TO + 0x14)); + __raw_writel(0xccccbbbb, ((void __iomem *)MSCC_DDR_TO + 0x18)); + __raw_writel(0xeeeedddd, ((void __iomem *)MSCC_DDR_TO + 0x1C)); +} +#endif /* __ASM_MACH_DDR_H */ diff --git a/arch/mips/mach-mscc/include/mach/ocelot/ocelot.h b/arch/mips/mach-mscc/include/mach/ocelot/ocelot.h new file mode 100644 index 0000000000..2cb2135d37 --- /dev/null +++ b/arch/mips/mach-mscc/include/mach/ocelot/ocelot.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Microsemi Ocelot Switch driver + * + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef _MSCC_OCELOT_H_ +#define _MSCC_OCELOT_H_ + +#include +#include + +/* + * Target offset base(s) + */ +#define MSCC_IO_ORIGIN1_OFFSET 0x70000000 +#define MSCC_IO_ORIGIN1_SIZE 0x00200000 +#define MSCC_IO_ORIGIN2_OFFSET 0x71000000 +#define MSCC_IO_ORIGIN2_SIZE 0x01000000 +#define BASE_CFG ((void __iomem *)0x70000000) +#define BASE_DEVCPU_GCB ((void __iomem *)0x71070000) + +#endif diff --git a/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h new file mode 100644 index 0000000000..f8aa97ba26 --- /dev/null +++ b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef _MSCC_OCELOT_DEVCPU_GCB_H_ +#define _MSCC_OCELOT_DEVCPU_GCB_H_ + +#define PERF_SOFT_RST 0x8 + +#define PERF_SOFT_RST_SOFT_NON_CFG_RST BIT(2) +#define PERF_SOFT_RST_SOFT_SWC_RST BIT(1) +#define PERF_SOFT_RST_SOFT_CHIP_RST BIT(0) + +#define PERF_GPIO_OUT_SET 0x34 + +#define PERF_GPIO_OUT_CLR 0x38 + +#define PERF_GPIO_OE 0x44 + +#endif diff --git a/arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h new file mode 100644 index 0000000000..04cf70bec3 --- /dev/null +++ b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h @@ -0,0 +1,274 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef _MSCC_OCELOT_ICPU_CFG_H_ +#define _MSCC_OCELOT_ICPU_CFG_H_ + +#define ICPU_GPR(x) (0x4 * (x)) +#define ICPU_GPR_RSZ 0x4 + +#define ICPU_RESET 0x20 + +#define ICPU_RESET_CORE_RST_CPU_ONLY BIT(3) +#define ICPU_RESET_CORE_RST_PROTECT BIT(2) +#define ICPU_RESET_CORE_RST_FORCE BIT(1) +#define ICPU_RESET_MEM_RST_FORCE BIT(0) + +#define ICPU_GENERAL_CTRL 0x24 + +#define ICPU_GENERAL_CTRL_CPU_BUSIF_SLEEP_DIS BIT(14) +#define ICPU_GENERAL_CTRL_CPU_BUSIF_WERR_ENA BIT(13) +#define ICPU_GENERAL_CTRL_CPU_8051_IROM_ENA BIT(12) +#define ICPU_GENERAL_CTRL_CPU_MIPS_DIS BIT(11) +#define ICPU_GENERAL_CTRL_IF_MIIM_SLV_ADDR_SEL BIT(10) +#define ICPU_GENERAL_CTRL_IF_MIIM_SLV_ENA BIT(9) +#define ICPU_GENERAL_CTRL_IF_PI_SLV_DONEPOL BIT(8) +#define ICPU_GENERAL_CTRL_IF_PI_MST_ENA BIT(7) +#define ICPU_GENERAL_CTRL_IF_PI_SLV_ENA BIT(6) +#define ICPU_GENERAL_CTRL_IF_SI_OWNER(x) (((x) << 4) & GENMASK(5, 4)) +#define ICPU_GENERAL_CTRL_IF_SI_OWNER_M GENMASK(5, 4) +#define ICPU_GENERAL_CTRL_IF_SI_OWNER_X(x) (((x) & GENMASK(5, 4)) >> 4) +#define ICPU_GENERAL_CTRL_SSI_MST_CONTENTION BIT(3) +#define ICPU_GENERAL_CTRL_CPU_BE_ENA BIT(2) +#define ICPU_GENERAL_CTRL_CPU_DIS BIT(1) +#define ICPU_GENERAL_CTRL_BOOT_MODE_ENA BIT(0) +#define ICPU_SPI_MST_CFG 0x3c + +#define ICPU_SPI_MST_CFG_A32B_ENA BIT(11) +#define ICPU_SPI_MST_CFG_FAST_READ_ENA BIT(10) +#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME(x) (((x) << 5) & GENMASK(9, 5)) +#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME_M GENMASK(9, 5) +#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME_X(x) (((x) & GENMASK(9, 5)) >> 5) +#define ICPU_SPI_MST_CFG_CLK_DIV(x) ((x) & GENMASK(4, 0)) +#define ICPU_SPI_MST_CFG_CLK_DIV_M GENMASK(4, 0) + +#define ICPU_SW_MODE 0x50 + +#define ICPU_SW_MODE_SW_PIN_CTRL_MODE BIT(13) +#define ICPU_SW_MODE_SW_SPI_SCK BIT(12) +#define ICPU_SW_MODE_SW_SPI_SCK_OE BIT(11) +#define ICPU_SW_MODE_SW_SPI_SDO BIT(10) +#define ICPU_SW_MODE_SW_SPI_SDO_OE BIT(9) +#define ICPU_SW_MODE_SW_SPI_CS(x) (((x) << 5) & GENMASK(8, 5)) +#define ICPU_SW_MODE_SW_SPI_CS_M GENMASK(8, 5) +#define ICPU_SW_MODE_SW_SPI_CS_X(x) (((x) & GENMASK(8, 5)) >> 5) +#define ICPU_SW_MODE_SW_SPI_CS_OE(x) (((x) << 1) & GENMASK(4, 1)) +#define ICPU_SW_MODE_SW_SPI_CS_OE_M GENMASK(4, 1) +#define ICPU_SW_MODE_SW_SPI_CS_OE_X(x) (((x) & GENMASK(4, 1)) >> 1) +#define ICPU_SW_MODE_SW_SPI_SDI BIT(0) + +#define ICPU_INTR_ENA 0x88 + +#define ICPU_DST_INTR_MAP(x) (0x98 + 0x4 * (x)) +#define ICPU_DST_INTR_MAP_RSZ 0x4 + +#define ICPU_DST_INTR_IDENT 0xa8 +#define ICPU_DST_INTR_IDENT_RSZ 0x4 + +#define ICPU_TIMER_TICK_DIV 0xe8 +#define ICPU_TIMER_VALUE(x) (0xec + 0x4 * (x)) + +#define ICPU_TIMER_CTRL(x) (0x104 + 0x4 * (x)) +#define ICPU_TIMER_CTRL_MAX_FREQ_ENA BIT(3) +#define ICPU_TIMER_CTRL_ONE_SHOT_ENA BIT(2) +#define ICPU_TIMER_CTRL_TIMER_ENA BIT(1) +#define ICPU_TIMER_CTRL_FORCE_RELOAD BIT(0) + +#define ICPU_MEMCTRL_CTRL 0x110 +#define ICPU_MEMCTRL_CTRL_PWR_DOWN BIT(3) +#define ICPU_MEMCTRL_CTRL_MDSET BIT(2) +#define ICPU_MEMCTRL_CTRL_STALL_REF_ENA BIT(1) +#define ICPU_MEMCTRL_CTRL_INITIALIZE BIT(0) + +#define ICPU_MEMCTRL_CFG 0x114 + +#define ICPU_MEMCTRL_CFG_DDR_512MBYTE_PLUS BIT(16) +#define ICPU_MEMCTRL_CFG_DDR_ECC_ERR_ENA BIT(15) +#define ICPU_MEMCTRL_CFG_DDR_ECC_COR_ENA BIT(14) +#define ICPU_MEMCTRL_CFG_DDR_ECC_ENA BIT(13) +#define ICPU_MEMCTRL_CFG_DDR_WIDTH BIT(12) +#define ICPU_MEMCTRL_CFG_DDR_MODE BIT(11) +#define ICPU_MEMCTRL_CFG_BURST_SIZE BIT(10) +#define ICPU_MEMCTRL_CFG_BURST_LEN BIT(9) +#define ICPU_MEMCTRL_CFG_BANK_CNT BIT(8) +#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR(x) (((x) << 4) & GENMASK(7, 4)) +#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR_M GENMASK(7, 4) +#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR_X(x) (((x) & GENMASK(7, 4)) >> 4) +#define ICPU_MEMCTRL_CFG_MSB_COL_ADDR(x) ((x) & GENMASK(3, 0)) +#define ICPU_MEMCTRL_CFG_MSB_COL_ADDR_M GENMASK(3, 0) + +#define ICPU_MEMCTRL_STAT 0x118 + +#define ICPU_MEMCTRL_STAT_RDATA_MASKED BIT(5) +#define ICPU_MEMCTRL_STAT_RDATA_DUMMY BIT(4) +#define ICPU_MEMCTRL_STAT_RDATA_ECC_ERR BIT(3) +#define ICPU_MEMCTRL_STAT_RDATA_ECC_COR BIT(2) +#define ICPU_MEMCTRL_STAT_PWR_DOWN_ACK BIT(1) +#define ICPU_MEMCTRL_STAT_INIT_DONE BIT(0) + +#define ICPU_MEMCTRL_REF_PERIOD 0x11c + +#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(x) (((x) << 16) & GENMASK(19, 16)) +#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF_M GENMASK(19, 16) +#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF_X(x) (((x) & GENMASK(19, 16)) >> 16) +#define ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(x) ((x) & GENMASK(15, 0)) +#define ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD_M GENMASK(15, 0) + +#define ICPU_MEMCTRL_TIMING0 0x124 + +#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY(x) (((x) << 28) & GENMASK(31, 28)) +#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY_M GENMASK(31, 28) +#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY_X(x) (((x) & GENMASK(31, 28)) >> 28) +#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY(x) (((x) << 24) & GENMASK(27, 24)) +#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY_M GENMASK(27, 24) +#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY_X(x) (((x) & GENMASK(27, 24)) >> 24) +#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY(x) (((x) << 20) & GENMASK(23, 20)) +#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY_M GENMASK(23, 20) +#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY_X(x) (((x) & GENMASK(23, 20)) >> 20) +#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(x) (((x) << 16) & GENMASK(19, 16)) +#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY_M GENMASK(19, 16) +#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY_X(x) (((x) & GENMASK(19, 16)) >> 16) +#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(x) (((x) << 12) & GENMASK(15, 12)) +#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY_M GENMASK(15, 12) +#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY_X(x) (((x) & GENMASK(15, 12)) >> 12) +#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(x) (((x) << 8) & GENMASK(11, 8)) +#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY_M GENMASK(11, 8) +#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY_X(x) (((x) & GENMASK(11, 8)) >> 8) +#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(x) (((x) << 4) & GENMASK(7, 4)) +#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY_M GENMASK(7, 4) +#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY_X(x) (((x) & GENMASK(7, 4)) >> 4) +#define ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(x) ((x) & GENMASK(3, 0)) +#define ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY_M GENMASK(3, 0) + +#define ICPU_MEMCTRL_TIMING1 0x128 + +#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(x) (((x) << 24) & GENMASK(31, 24)) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY_M GENMASK(31, 24) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY_X(x) (((x) & GENMASK(31, 24)) >> 24) +#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(x) (((x) << 16) & GENMASK(23, 16)) +#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY_M GENMASK(23, 16) +#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY_X(x) (((x) & GENMASK(23, 16)) >> 16) +#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(x) (((x) << 12) & GENMASK(15, 12)) +#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY_M GENMASK(15, 12) +#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY_X(x) (((x) & GENMASK(15, 12)) >> 12) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(x) (((x) << 8) & GENMASK(11, 8)) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY_M GENMASK(11, 8) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY_X(x) (((x) & GENMASK(11, 8)) >> 8) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(x) (((x) << 4) & GENMASK(7, 4)) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY_M GENMASK(7, 4) +#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY_X(x) (((x) & GENMASK(7, 4)) >> 4) +#define ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(x) ((x) & GENMASK(3, 0)) +#define ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY_M GENMASK(3, 0) + +#define ICPU_MEMCTRL_TIMING2 0x12c + +#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(x) (((x) << 28) & GENMASK(31, 28)) +#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY_M GENMASK(31, 28) +#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY_X(x) (((x) & GENMASK(31, 28)) >> 28) +#define ICPU_MEMCTRL_TIMING2_MDSET_DLY(x) (((x) << 24) & GENMASK(27, 24)) +#define ICPU_MEMCTRL_TIMING2_MDSET_DLY_M GENMASK(27, 24) +#define ICPU_MEMCTRL_TIMING2_MDSET_DLY_X(x) (((x) & GENMASK(27, 24)) >> 24) +#define ICPU_MEMCTRL_TIMING2_REF_DLY(x) (((x) << 16) & GENMASK(23, 16)) +#define ICPU_MEMCTRL_TIMING2_REF_DLY_M GENMASK(23, 16) +#define ICPU_MEMCTRL_TIMING2_REF_DLY_X(x) (((x) & GENMASK(23, 16)) >> 16) +#define ICPU_MEMCTRL_TIMING2_INIT_DLY(x) ((x) & GENMASK(15, 0)) +#define ICPU_MEMCTRL_TIMING2_INIT_DLY_M GENMASK(15, 0) + +#define ICPU_MEMCTRL_TIMING3 0x130 + +#define ICPU_MEMCTRL_TIMING3_RMW_DLY(x) (((x) << 16) & GENMASK(19, 16)) +#define ICPU_MEMCTRL_TIMING3_RMW_DLY_M GENMASK(19, 16) +#define ICPU_MEMCTRL_TIMING3_RMW_DLY_X(x) (((x) & GENMASK(19, 16)) >> 16) +#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY(x) (((x) << 12) & GENMASK(15, 12)) +#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY_M GENMASK(15, 12) +#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY_X(x) (((x) & GENMASK(15, 12)) >> 12) +#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(x) (((x) << 8) & GENMASK(11, 8)) +#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY_M GENMASK(11, 8) +#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY_X(x) (((x) & GENMASK(11, 8)) >> 8) +#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(x) (((x) << 4) & GENMASK(7, 4)) +#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY_M GENMASK(7, 4) +#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY_X(x) (((x) & GENMASK(7, 4)) >> 4) +#define ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(x) ((x) & GENMASK(3, 0)) +#define ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY_M GENMASK(3, 0) + +#define ICPU_MEMCTRL_MR0_VAL 0x138 + +#define ICPU_MEMCTRL_MR1_VAL 0x13c + +#define ICPU_MEMCTRL_MR2_VAL 0x140 + +#define ICPU_MEMCTRL_MR3_VAL 0x144 + +#define ICPU_MEMCTRL_TERMRES_CTRL 0x148 + +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_EXT BIT(11) +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA(x) (((x) << 7) & GENMASK(10, 7)) +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA_M GENMASK(10, 7) +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA_X(x) (((x) & GENMASK(10, 7)) >> 7) +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_EXT BIT(6) +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA(x) (((x) << 2) & GENMASK(5, 2)) +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA_M GENMASK(5, 2) +#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA_X(x) (((x) & GENMASK(5, 2)) >> 2) +#define ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_EXT BIT(1) +#define ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_ENA BIT(0) + +#define ICPU_MEMCTRL_DQS_DLY(x) (0x150 + 0x4 * (x)) +#define ICPU_MEMCTRL_DQS_DLY_RSZ 0x4 + +#define ICPU_MEMCTRL_DQS_DLY_TRAIN_DQ_ENA BIT(11) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1(x) (((x) << 8) & GENMASK(10, 8)) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1_M GENMASK(10, 8) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1_X(x) (((x) & GENMASK(10, 8)) >> 8) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0(x) (((x) << 5) & GENMASK(7, 5)) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0_M GENMASK(7, 5) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0_X(x) (((x) & GENMASK(7, 5)) >> 5) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY(x) ((x) & GENMASK(4, 0)) +#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_M GENMASK(4, 0) + +#define ICPU_MEMPHY_CFG 0x160 + +#define ICPU_MEMPHY_CFG_PHY_FLUSH_DIS BIT(10) +#define ICPU_MEMPHY_CFG_PHY_RD_ADJ_DIS BIT(9) +#define ICPU_MEMPHY_CFG_PHY_DQS_EXT BIT(8) +#define ICPU_MEMPHY_CFG_PHY_FIFO_RST BIT(7) +#define ICPU_MEMPHY_CFG_PHY_DLL_BL_RST BIT(6) +#define ICPU_MEMPHY_CFG_PHY_DLL_CL_RST BIT(5) +#define ICPU_MEMPHY_CFG_PHY_ODT_OE BIT(4) +#define ICPU_MEMPHY_CFG_PHY_CK_OE BIT(3) +#define ICPU_MEMPHY_CFG_PHY_CL_OE BIT(2) +#define ICPU_MEMPHY_CFG_PHY_SSTL_ENA BIT(1) +#define ICPU_MEMPHY_CFG_PHY_RST BIT(0) + +#define ICPU_MEMPHY_ZCAL 0x188 + +#define ICPU_MEMPHY_ZCAL_ZCAL_CLK_SEL BIT(9) +#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT(x) (((x) << 5) & GENMASK(8, 5)) +#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT_M GENMASK(8, 5) +#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT_X(x) (((x) & GENMASK(8, 5)) >> 5) +#define ICPU_MEMPHY_ZCAL_ZCAL_PROG(x) (((x) << 1) & GENMASK(4, 1)) +#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_M GENMASK(4, 1) +#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_X(x) (((x) & GENMASK(4, 1)) >> 1) +#define ICPU_MEMPHY_ZCAL_ZCAL_ENA BIT(0) + +#define ICPU_MEMPHY_ZCAL_STAT 0x18c + +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL(x) (((x) << 12) & GENMASK(31, 12)) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL_M GENMASK(31, 12) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL_X(x) (((x) & GENMASK(31, 12)) >> 12) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU(x) (((x) << 8) & GENMASK(9, 8)) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU_M GENMASK(9, 8) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU_X(x) (((x) & GENMASK(9, 8)) >> 8) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD(x) (((x) << 6) & GENMASK(7, 6)) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD_M GENMASK(7, 6) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD_X(x) (((x) & GENMASK(7, 6)) >> 6) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU(x) (((x) << 4) & GENMASK(5, 4)) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU_M GENMASK(5, 4) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU_X(x) (((x) & GENMASK(5, 4)) >> 4) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD(x) (((x) << 2) & GENMASK(3, 2)) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD_M GENMASK(3, 2) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD_X(x) (((x) & GENMASK(3, 2)) >> 2) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ERR BIT(1) +#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_DONE BIT(0) +#endif diff --git a/arch/mips/mach-mscc/include/mach/tlb.h b/arch/mips/mach-mscc/include/mach/tlb.h new file mode 100644 index 0000000000..fdb554f551 --- /dev/null +++ b/arch/mips/mach-mscc/include/mach/tlb.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef __ASM_MACH_TLB_H +#define __ASM_MACH_TLB_H + +#include +#include +#include + +#define TLB_HI_MASK 0xffffe000 +#define TLB_LO_MASK 0x3fffffff /* Masks off Fill bits */ +#define TLB_LO_SHIFT 6 /* PFN Start bit */ + +#define PAGEMASK_SHIFT 13 + +#define MMU_PAGE_CACHED (3 << 3) /* C(5:3) Cache Coherency Attributes */ +#define MMU_PAGE_UNCACHED (2 << 3) /* C(5:3) Cache Coherency Attributes */ +#define MMU_PAGE_DIRTY BIT(2) /* = Writeable */ +#define MMU_PAGE_VALID BIT(1) +#define MMU_PAGE_GLOBAL BIT(0) +#define MMU_REGIO_RO_C (MMU_PAGE_CACHED | MMU_PAGE_VALID | MMU_PAGE_GLOBAL) +#define MMU_REGIO_RO (MMU_PAGE_UNCACHED | MMU_PAGE_VALID | MMU_PAGE_GLOBAL) +#define MMU_REGIO_RW (MMU_PAGE_DIRTY | MMU_REGIO_RO) +#define MMU_REGIO_INVAL (MMU_PAGE_GLOBAL) + +#define TLB_COUNT_MASK GENMASK(5, 0) +#define TLB_COUNT_OFF 25 + +static inline u32 get_tlb_count(void) +{ + register u32 config1; + + config1 = read_c0_config1(); + config1 >>= TLB_COUNT_OFF; + config1 &= TLB_COUNT_MASK; + + return 1 + config1; +} + +static inline void create_tlb(int index, u32 offset, u32 size, u32 tlb_attrib1, + u32 tlb_attrib2) +{ + register u32 tlb_mask, tlb_lo0, tlb_lo1; + + tlb_mask = ((size >> 12) - 1) << PAGEMASK_SHIFT; + tlb_lo0 = tlb_attrib1 | (offset >> TLB_LO_SHIFT); + tlb_lo1 = tlb_attrib2 | ((offset + size) >> TLB_LO_SHIFT); + + write_one_tlb(index, tlb_mask, offset & TLB_HI_MASK, + tlb_lo0 & TLB_LO_MASK, tlb_lo1 & TLB_LO_MASK); +} +#endif /* __ASM_MACH_TLB_H */ diff --git a/arch/mips/mach-mscc/lowlevel_init.S b/arch/mips/mach-mscc/lowlevel_init.S new file mode 100644 index 0000000000..f8f14adf61 --- /dev/null +++ b/arch/mips/mach-mscc/lowlevel_init.S @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#include +#include + + .set noreorder + .extern vcoreiii_tlb_init + +LEAF(lowlevel_init) + /* + * As we have no stack yet, we can assume the restricted + * luxury of the sX-registers without saving them + */ + move s0,ra + + jal vcoreiii_tlb_init + nop + jr s0 + nop + END(lowlevel_init) diff --git a/arch/mips/mach-mscc/reset.c b/arch/mips/mach-mscc/reset.c new file mode 100644 index 0000000000..390bbd086a --- /dev/null +++ b/arch/mips/mach-mscc/reset.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#include + +#include +#include + +#include + +void _machine_restart(void) +{ + register u32 resetbits = PERF_SOFT_RST_SOFT_CHIP_RST; + (void)readl(BASE_DEVCPU_GCB + PERF_SOFT_RST); + + /* Make sure VCore is NOT protected from reset */ + clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_CORE_RST_PROTECT); + + /* Change to SPI bitbang for SPI reset workaround... */ + writel(ICPU_SW_MODE_SW_SPI_CS_OE(1) | ICPU_SW_MODE_SW_SPI_CS(1) | + ICPU_SW_MODE_SW_PIN_CTRL_MODE, BASE_CFG + ICPU_SW_MODE); + + /* Do the global reset */ + writel(resetbits, BASE_DEVCPU_GCB + PERF_SOFT_RST); + + while (1) + ; /* NOP */ +}