mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-30 00:20:44 +09:00
ppc4xx: remove PCI405 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
This commit is contained in:
parent
cc6e715f1b
commit
dbe7bb0d21
@ -125,9 +125,6 @@ config TARGET_CPCI405AB
|
|||||||
config TARGET_CPCI405DT
|
config TARGET_CPCI405DT
|
||||||
bool "Support CPCI405DT"
|
bool "Support CPCI405DT"
|
||||||
|
|
||||||
config TARGET_PCI405
|
|
||||||
bool "Support PCI405"
|
|
||||||
|
|
||||||
config TARGET_PLU405
|
config TARGET_PLU405
|
||||||
bool "Support PLU405"
|
bool "Support PLU405"
|
||||||
|
|
||||||
@ -226,7 +223,6 @@ source "board/csb472/Kconfig"
|
|||||||
source "board/dave/PPChameleonEVB/Kconfig"
|
source "board/dave/PPChameleonEVB/Kconfig"
|
||||||
source "board/esd/cpci2dp/Kconfig"
|
source "board/esd/cpci2dp/Kconfig"
|
||||||
source "board/esd/cpci405/Kconfig"
|
source "board/esd/cpci405/Kconfig"
|
||||||
source "board/esd/pci405/Kconfig"
|
|
||||||
source "board/esd/plu405/Kconfig"
|
source "board/esd/plu405/Kconfig"
|
||||||
source "board/esd/pmc405/Kconfig"
|
source "board/esd/pmc405/Kconfig"
|
||||||
source "board/esd/pmc405de/Kconfig"
|
source "board/esd/pmc405de/Kconfig"
|
||||||
|
@ -1,12 +0,0 @@
|
|||||||
if TARGET_PCI405
|
|
||||||
|
|
||||||
config SYS_BOARD
|
|
||||||
default "pci405"
|
|
||||||
|
|
||||||
config SYS_VENDOR
|
|
||||||
default "esd"
|
|
||||||
|
|
||||||
config SYS_CONFIG_NAME
|
|
||||||
default "PCI405"
|
|
||||||
|
|
||||||
endif
|
|
@ -1,6 +0,0 @@
|
|||||||
PCI405 BOARD
|
|
||||||
M: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
||||||
S: Maintained
|
|
||||||
F: board/esd/pci405/
|
|
||||||
F: include/configs/PCI405.h
|
|
||||||
F: configs/PCI405_defconfig
|
|
@ -1,9 +0,0 @@
|
|||||||
#
|
|
||||||
# (C) Copyright 2000-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
obj-y = pci405.o flash.o ../common/misc.o cmd_pci405.o
|
|
||||||
obj-y += writeibm.o
|
|
@ -1,97 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2002-2004
|
|
||||||
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <command.h>
|
|
||||||
#include <malloc.h>
|
|
||||||
#include <net.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
#include <pci.h>
|
|
||||||
#include <asm/4xx_pci.h>
|
|
||||||
#include <asm/processor.h>
|
|
||||||
|
|
||||||
#include "pci405.h"
|
|
||||||
|
|
||||||
#if defined(CONFIG_CMD_BSP)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command loadpci: wait for signal from host and boot image.
|
|
||||||
*/
|
|
||||||
int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
||||||
{
|
|
||||||
unsigned int *ptr;
|
|
||||||
int count = 0;
|
|
||||||
int count2 = 0;
|
|
||||||
int i;
|
|
||||||
char addr[16];
|
|
||||||
char str[] = "\\|/-";
|
|
||||||
char *local_args[2];
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Mark sync address
|
|
||||||
*/
|
|
||||||
ptr = 0;
|
|
||||||
/* cppcheck-suppress nullPointer */
|
|
||||||
*ptr = 0xffffffff;
|
|
||||||
puts("\nWaiting for image from pci host -");
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Wait for host to write the start address
|
|
||||||
*/
|
|
||||||
/* cppcheck-suppress nullPointer */
|
|
||||||
while (*ptr == 0xffffffff) {
|
|
||||||
count++;
|
|
||||||
if (!(count % 100)) {
|
|
||||||
count2++;
|
|
||||||
putc(0x08); /* backspace */
|
|
||||||
putc(str[count2 % 4]);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Abort if ctrl-c was pressed */
|
|
||||||
if (ctrlc()) {
|
|
||||||
puts("\nAbort\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
udelay(1000);
|
|
||||||
}
|
|
||||||
|
|
||||||
if (*ptr == PCI_RECONFIG_MAGIC) {
|
|
||||||
/*
|
|
||||||
* Save own pci configuration in PRAM
|
|
||||||
*/
|
|
||||||
memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN);
|
|
||||||
ptr = (unsigned int *)PCI_REGS_ADDR + 1;
|
|
||||||
for (i=0; i<0x40; i+=4) {
|
|
||||||
pci_read_config_dword(PCIDEVID_405GP, i, ptr++);
|
|
||||||
}
|
|
||||||
ptr = (unsigned int *)PCI_REGS_ADDR;
|
|
||||||
*ptr = crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4);
|
|
||||||
|
|
||||||
printf("\nStoring PCI Configuration Regs...\n");
|
|
||||||
} else {
|
|
||||||
sprintf(addr, "%08x", *ptr);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Boot image via bootm
|
|
||||||
*/
|
|
||||||
printf("\nBooting Image at addr 0x%s ...\n", addr);
|
|
||||||
setenv("loadaddr", addr);
|
|
||||||
|
|
||||||
local_args[0] = argv[0];
|
|
||||||
local_args[1] = NULL;
|
|
||||||
do_bootm (cmdtp, 0, 1, local_args);
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
U_BOOT_CMD(
|
|
||||||
loadpci, 1, 1, do_loadpci,
|
|
||||||
"Wait for pci-image and boot it",
|
|
||||||
""
|
|
||||||
);
|
|
||||||
#endif
|
|
@ -1,85 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2001
|
|
||||||
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <asm/ppc4xx.h>
|
|
||||||
#include <asm/processor.h>
|
|
||||||
|
|
||||||
/*
|
|
||||||
* include common flash code (for esd boards)
|
|
||||||
*/
|
|
||||||
#include "../common/flash.c"
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Functions
|
|
||||||
*/
|
|
||||||
static ulong flash_get_size (vu_long * addr, flash_info_t * info);
|
|
||||||
static void flash_get_offsets (ulong base, flash_info_t * info);
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
*/
|
|
||||||
|
|
||||||
unsigned long flash_init (void)
|
|
||||||
{
|
|
||||||
unsigned long size_b0;
|
|
||||||
int i;
|
|
||||||
uint pbcr;
|
|
||||||
unsigned long base_b0;
|
|
||||||
int size_val = 0;
|
|
||||||
|
|
||||||
/* Init: no FLASHes known */
|
|
||||||
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
|
|
||||||
flash_info[i].flash_id = FLASH_UNKNOWN;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Static FLASH Bank configuration here - FIXME XXX */
|
|
||||||
|
|
||||||
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
|
|
||||||
|
|
||||||
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
|
|
||||||
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
|
|
||||||
size_b0, size_b0<<20);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Setup offsets */
|
|
||||||
flash_get_offsets (-size_b0, &flash_info[0]);
|
|
||||||
|
|
||||||
/* Re-do sizing to get full correct info */
|
|
||||||
mtdcr(EBC0_CFGADDR, PB0CR);
|
|
||||||
pbcr = mfdcr(EBC0_CFGDATA);
|
|
||||||
mtdcr(EBC0_CFGADDR, PB0CR);
|
|
||||||
base_b0 = -size_b0;
|
|
||||||
switch (size_b0) {
|
|
||||||
case 1 << 20:
|
|
||||||
size_val = 0;
|
|
||||||
break;
|
|
||||||
case 2 << 20:
|
|
||||||
size_val = 1;
|
|
||||||
break;
|
|
||||||
case 4 << 20:
|
|
||||||
size_val = 2;
|
|
||||||
break;
|
|
||||||
case 8 << 20:
|
|
||||||
size_val = 3;
|
|
||||||
break;
|
|
||||||
case 16 << 20:
|
|
||||||
size_val = 4;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
|
|
||||||
mtdcr(EBC0_CFGDATA, pbcr);
|
|
||||||
|
|
||||||
/* Monitor protection ON by default */
|
|
||||||
(void)flash_protect(FLAG_PROTECT_SET,
|
|
||||||
-monitor_flash_len,
|
|
||||||
0xffffffff,
|
|
||||||
&flash_info[0]);
|
|
||||||
|
|
||||||
flash_info[0].size = size_b0;
|
|
||||||
|
|
||||||
return (size_b0);
|
|
||||||
}
|
|
File diff suppressed because it is too large
Load Diff
@ -1,366 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2001-2004
|
|
||||||
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <asm/processor.h>
|
|
||||||
#include <command.h>
|
|
||||||
#include <malloc.h>
|
|
||||||
#include <pci.h>
|
|
||||||
#include <asm/4xx_pci.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
|
|
||||||
#include "pci405.h"
|
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR;
|
|
||||||
|
|
||||||
/* Prototypes */
|
|
||||||
unsigned long fpga_done_state(void);
|
|
||||||
unsigned long fpga_init_state(void);
|
|
||||||
|
|
||||||
#if 0
|
|
||||||
#define FPGA_DEBUG
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* predefine these here */
|
|
||||||
#define FPGA_DONE_STATE (fpga_done_state())
|
|
||||||
#define FPGA_INIT_STATE (fpga_init_state())
|
|
||||||
|
|
||||||
/* fpga configuration data - generated by bin2cc */
|
|
||||||
const unsigned char fpgadata[] =
|
|
||||||
{
|
|
||||||
#include "fpgadata.c"
|
|
||||||
};
|
|
||||||
|
|
||||||
/*
|
|
||||||
* include common fpga code (for esd boards)
|
|
||||||
*/
|
|
||||||
#include "../common/fpga.c"
|
|
||||||
|
|
||||||
#define FPGA_DONE_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE)
|
|
||||||
#define FPGA_DONE_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12)
|
|
||||||
|
|
||||||
#define FPGA_INIT_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT)
|
|
||||||
#define FPGA_INIT_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12)
|
|
||||||
|
|
||||||
|
|
||||||
int board_revision(void)
|
|
||||||
{
|
|
||||||
unsigned long CPC0_CR0Reg;
|
|
||||||
unsigned long value;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Get version of PCI405 board from GPIO's
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
|
|
||||||
*/
|
|
||||||
CPC0_CR0Reg = mfdcr(CPC0_CR0);
|
|
||||||
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
|
|
||||||
out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200);
|
|
||||||
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200);
|
|
||||||
udelay(1000); /* wait some time before reading input */
|
|
||||||
value = in_be32((void*)GPIO0_IR) & 0x00100200; /* get config bits */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Restore GPIO settings
|
|
||||||
*/
|
|
||||||
mtdcr(CPC0_CR0, CPC0_CR0Reg);
|
|
||||||
|
|
||||||
switch (value) {
|
|
||||||
case 0x00100200:
|
|
||||||
/* CS2==1 && IRQ5==1 -> version 1.0 and 1.1 */
|
|
||||||
return 1;
|
|
||||||
case 0x00000200:
|
|
||||||
/* CS2==0 && IRQ5==1 -> version 1.2 */
|
|
||||||
return 2;
|
|
||||||
case 0x00000000:
|
|
||||||
/* CS2==0 && IRQ5==0 -> version 1.3 */
|
|
||||||
return 3;
|
|
||||||
#if 0 /* not yet manufactured ! */
|
|
||||||
case 0x00100000:
|
|
||||||
/* CS2==1 && IRQ5==0 -> version 1.4 */
|
|
||||||
return 4;
|
|
||||||
#endif
|
|
||||||
default:
|
|
||||||
/* should not be reached! */
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
unsigned long fpga_done_state(void)
|
|
||||||
{
|
|
||||||
if (gd->board_type < 2) {
|
|
||||||
return FPGA_DONE_STATE_V11;
|
|
||||||
} else {
|
|
||||||
return FPGA_DONE_STATE_V12;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
unsigned long fpga_init_state(void)
|
|
||||||
{
|
|
||||||
if (gd->board_type < 2) {
|
|
||||||
return FPGA_INIT_STATE_V11;
|
|
||||||
} else {
|
|
||||||
return FPGA_INIT_STATE_V12;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
int board_early_init_f (void)
|
|
||||||
{
|
|
||||||
unsigned long CPC0_CR0Reg;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board)
|
|
||||||
*/
|
|
||||||
out_be32((void*)GPIO0_ODR, 0x00000000); /* no open drain pins */
|
|
||||||
out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */
|
|
||||||
out_be32((void*)GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */
|
|
||||||
out_be32((void*)GPIO0_OR, 0); /* pull prg low */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
||||||
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
||||||
* IRQ 17-24 RESERVED
|
|
||||||
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
||||||
* IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
|
|
||||||
* IRQ 27 (EXT IRQ 2) CAN2; active low; level sensitive
|
|
||||||
* IRQ 28 (EXT IRQ 3) CAN3; active low; level sensitive
|
|
||||||
* IRQ 29 (EXT IRQ 4) unused; active low; level sensitive
|
|
||||||
* IRQ 30 (EXT IRQ 5) FPGA Timestamp; active low; level sensitive
|
|
||||||
* IRQ 31 (EXT IRQ 6) PCI Reset; active low; level sensitive
|
|
||||||
*/
|
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
||||||
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
||||||
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
|
|
||||||
mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
|
|
||||||
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
|
|
||||||
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
|
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Setup GPIO pins (IRQ4/GPIO21 as GPIO)
|
|
||||||
*/
|
|
||||||
CPC0_CR0Reg = mfdcr(CPC0_CR0);
|
|
||||||
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00008000);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Setup GPIO pins (CS6+CS7 as GPIO)
|
|
||||||
*/
|
|
||||||
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 25 us
|
|
||||||
*/
|
|
||||||
mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int misc_init_r (void)
|
|
||||||
{
|
|
||||||
unsigned char *dst;
|
|
||||||
ulong len = sizeof(fpgadata);
|
|
||||||
int status;
|
|
||||||
int index;
|
|
||||||
int i;
|
|
||||||
unsigned int *ptr;
|
|
||||||
unsigned int *magic;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* On PCI-405 the environment is saved in eeprom!
|
|
||||||
* FPGA can be gzip compressed (malloc) and booted this late.
|
|
||||||
*/
|
|
||||||
|
|
||||||
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
|
|
||||||
if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
|
|
||||||
printf ("GUNZIP ERROR - must RESET board to recover\n");
|
|
||||||
do_reset (NULL, 0, 0, NULL);
|
|
||||||
}
|
|
||||||
|
|
||||||
status = fpga_boot(dst, len);
|
|
||||||
if (status != 0) {
|
|
||||||
printf("\nFPGA: Booting failed ");
|
|
||||||
switch (status) {
|
|
||||||
case ERROR_FPGA_PRG_INIT_LOW:
|
|
||||||
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
|
|
||||||
break;
|
|
||||||
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
||||||
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
|
|
||||||
break;
|
|
||||||
case ERROR_FPGA_PRG_DONE:
|
|
||||||
printf("(Timeout: DONE not high after programming FPGA)\n ");
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* display infos on fpgaimage */
|
|
||||||
index = 15;
|
|
||||||
for (i=0; i<4; i++) {
|
|
||||||
len = dst[index];
|
|
||||||
printf("FPGA: %s\n", &(dst[index+1]));
|
|
||||||
index += len+3;
|
|
||||||
}
|
|
||||||
putc ('\n');
|
|
||||||
/* delayed reboot */
|
|
||||||
for (i=20; i>0; i--) {
|
|
||||||
printf("Rebooting in %2d seconds \r",i);
|
|
||||||
for (index=0;index<1000;index++)
|
|
||||||
udelay(1000);
|
|
||||||
}
|
|
||||||
putc ('\n');
|
|
||||||
do_reset(NULL, 0, 0, NULL);
|
|
||||||
}
|
|
||||||
|
|
||||||
puts("FPGA: ");
|
|
||||||
|
|
||||||
/* display infos on fpgaimage */
|
|
||||||
index = 15;
|
|
||||||
for (i=0; i<4; i++) {
|
|
||||||
len = dst[index];
|
|
||||||
printf("%s ", &(dst[index+1]));
|
|
||||||
index += len+3;
|
|
||||||
}
|
|
||||||
putc ('\n');
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Reset FPGA via FPGA_DATA pin
|
|
||||||
*/
|
|
||||||
SET_FPGA(FPGA_PRG | FPGA_CLK);
|
|
||||||
udelay(1000); /* wait 1ms */
|
|
||||||
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
|
|
||||||
udelay(1000); /* wait 1ms */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Check if magic for pci reconfig is written
|
|
||||||
*/
|
|
||||||
magic = (unsigned int *)0x00000004;
|
|
||||||
if (*magic == PCI_RECONFIG_MAGIC) {
|
|
||||||
/*
|
|
||||||
* Rewrite pci config regs (only after soft-reset with magic set)
|
|
||||||
*/
|
|
||||||
ptr = (unsigned int *)PCI_REGS_ADDR;
|
|
||||||
if (crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4) == *ptr) {
|
|
||||||
puts("Restoring PCI Configurations Regs!\n");
|
|
||||||
ptr = (unsigned int *)PCI_REGS_ADDR + 1;
|
|
||||||
for (i=0; i<0x40; i+=4) {
|
|
||||||
pci_write_config_dword(PCIDEVID_405GP, i, *ptr++);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
||||||
|
|
||||||
*magic = 0; /* clear pci reconfig magic again */
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Decrease PLB latency timeout and reduce priority of the PCI bridge master
|
|
||||||
*/
|
|
||||||
#define PCI0_BRDGOPT1 0x4a
|
|
||||||
pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Enable fairness and high bus utilization
|
|
||||||
*/
|
|
||||||
mtdcr(PLB0_ACR, 0x98000000);
|
|
||||||
|
|
||||||
free(dst);
|
|
||||||
return (0);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Check Board Identity:
|
|
||||||
*/
|
|
||||||
int checkboard (void)
|
|
||||||
{
|
|
||||||
char str[64];
|
|
||||||
int i = getenv_f("serial#", str, sizeof(str));
|
|
||||||
|
|
||||||
puts ("Board: ");
|
|
||||||
|
|
||||||
if (i == -1) {
|
|
||||||
puts ("### No HW ID - assuming PCI405");
|
|
||||||
} else {
|
|
||||||
puts (str);
|
|
||||||
}
|
|
||||||
|
|
||||||
gd->board_type = board_revision();
|
|
||||||
printf(" (Rev 1.%ld", gd->board_type);
|
|
||||||
|
|
||||||
if (gd->board_type >= 2) {
|
|
||||||
unsigned long CPC0_CR0Reg;
|
|
||||||
unsigned long value;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Setup GPIO pins (Trace/GPIO1 to GPIO)
|
|
||||||
*/
|
|
||||||
CPC0_CR0Reg = mfdcr(CPC0_CR0);
|
|
||||||
mtdcr(CPC0_CR0, CPC0_CR0Reg & ~0x08000000);
|
|
||||||
out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000);
|
|
||||||
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000);
|
|
||||||
udelay(1000); /* wait some time before reading input */
|
|
||||||
value = in_be32((void*)GPIO0_IR) & 0x40000000; /* get config bits */
|
|
||||||
if (value) {
|
|
||||||
puts(", 33 MHz PCI");
|
|
||||||
} else {
|
|
||||||
puts(", 66 MHz PCI");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
puts(")\n");
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* ------------------------------------------------------------------------- */
|
|
||||||
#define UART1_MCR 0xef600404
|
|
||||||
int wpeeprom(int wp)
|
|
||||||
{
|
|
||||||
int wp_state = wp;
|
|
||||||
|
|
||||||
if (wp == 1) {
|
|
||||||
out_8((void *)UART1_MCR, in_8((void *)UART1_MCR) & ~0x02);
|
|
||||||
} else if (wp == 0) {
|
|
||||||
out_8((void *)UART1_MCR, in_8((void *)UART1_MCR) | 0x02);
|
|
||||||
} else {
|
|
||||||
if (in_8((void *)UART1_MCR) & 0x02) {
|
|
||||||
wp_state = 0;
|
|
||||||
} else {
|
|
||||||
wp_state = 1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return wp_state;
|
|
||||||
}
|
|
||||||
|
|
||||||
int do_wpeeprom(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
||||||
{
|
|
||||||
int wp = -1;
|
|
||||||
if (argc >= 2) {
|
|
||||||
if (argv[1][0] == '1') {
|
|
||||||
wp = 1;
|
|
||||||
} else if (argv[1][0] == '0') {
|
|
||||||
wp = 0;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
wp = wpeeprom(wp);
|
|
||||||
printf("EEPROM write protection %s\n", wp ? "ENABLED" : "DISABLED");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
U_BOOT_CMD(
|
|
||||||
wpeeprom, 2, 1, do_wpeeprom,
|
|
||||||
"Check/Enable/Disable I2C EEPROM write protection",
|
|
||||||
"wpeeprom\n"
|
|
||||||
" - check I2C EEPROM write protection state\n"
|
|
||||||
"wpeeprom 1\n"
|
|
||||||
" - enable I2C EEPROM write protection\n"
|
|
||||||
"wpeeprom 0\n"
|
|
||||||
" - disable I2C EEPROM write protection"
|
|
||||||
);
|
|
@ -1,16 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2003
|
|
||||||
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef _PCI405_H_
|
|
||||||
#define _PCI405_H_
|
|
||||||
|
|
||||||
#define PCI_REGS_LEN 0x100
|
|
||||||
#define PCI_REGS_ADDR ((unsigned long)0x01000000 - PCI_REGS_LEN)
|
|
||||||
|
|
||||||
#define PCI_RECONFIG_MAGIC 0x07081967
|
|
||||||
|
|
||||||
#endif /* _PCI405_H_ */
|
|
@ -1,205 +0,0 @@
|
|||||||
/*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0 IBM-pibs
|
|
||||||
*/
|
|
||||||
/*----------------------------------------------------------------------------- */
|
|
||||||
/* Function: ext_bus_cntlr_init */
|
|
||||||
/* Description: Initializes the External Bus Controller for the external */
|
|
||||||
/* peripherals. IMPORTANT: For pass1 this code must run from */
|
|
||||||
/* cache since you can not reliably change a peripheral banks */
|
|
||||||
/* timing register (pbxap) while running code from that bank. */
|
|
||||||
/* For ex., since we are running from ROM on bank 0, we can NOT */
|
|
||||||
/* execute the code that modifies bank 0 timings from ROM, so */
|
|
||||||
/* we run it from cache. */
|
|
||||||
/* Bank 0 - Flash and SRAM */
|
|
||||||
/* Bank 1 - NVRAM/RTC */
|
|
||||||
/* Bank 2 - Keyboard/Mouse controller */
|
|
||||||
/* Bank 3 - IR controller */
|
|
||||||
/* Bank 4 - not used */
|
|
||||||
/* Bank 5 - not used */
|
|
||||||
/* Bank 6 - not used */
|
|
||||||
/* Bank 7 - FPGA registers */
|
|
||||||
/*----------------------------------------------------------------------------- */
|
|
||||||
#include <asm/ppc4xx.h>
|
|
||||||
|
|
||||||
#include <ppc_asm.tmpl>
|
|
||||||
#include <ppc_defs.h>
|
|
||||||
|
|
||||||
#include <asm/cache.h>
|
|
||||||
#include <asm/mmu.h>
|
|
||||||
|
|
||||||
|
|
||||||
.globl write_without_sync
|
|
||||||
write_without_sync:
|
|
||||||
/*
|
|
||||||
* Write one values to host via pci busmastering
|
|
||||||
* ptr = 0xc0000000 -> 0x01000000 (PCI)
|
|
||||||
* *ptr = 0x01234567;
|
|
||||||
*/
|
|
||||||
addi r31,0,0
|
|
||||||
lis r31,0xc000
|
|
||||||
|
|
||||||
start1:
|
|
||||||
lis r0,0x0123
|
|
||||||
ori r0,r0,0x4567
|
|
||||||
stw r0,0(r31)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Read one value back
|
|
||||||
* ptr = (volatile unsigned long *)addr;
|
|
||||||
* val = *ptr;
|
|
||||||
*/
|
|
||||||
|
|
||||||
lwz r0,0(r31)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* One pci config write
|
|
||||||
* ibmPciConfigWrite(0x2e, 2, 0x1234);
|
|
||||||
*/
|
|
||||||
/* subsystem id */
|
|
||||||
|
|
||||||
li r4,0x002C
|
|
||||||
oris r4,r4,0x8000
|
|
||||||
lis r3,0xEEC0
|
|
||||||
stwbrx r4,0,r3
|
|
||||||
|
|
||||||
li r5,0x1234
|
|
||||||
ori r3,r3,0x4
|
|
||||||
stwbrx r5,0,r3
|
|
||||||
|
|
||||||
b start1
|
|
||||||
|
|
||||||
blr /* never reached !!!! */
|
|
||||||
|
|
||||||
.globl write_with_sync
|
|
||||||
write_with_sync:
|
|
||||||
/*
|
|
||||||
* Write one values to host via pci busmastering
|
|
||||||
* ptr = 0xc0000000 -> 0x01000000 (PCI)
|
|
||||||
* *ptr = 0x01234567;
|
|
||||||
*/
|
|
||||||
addi r31,0,0
|
|
||||||
lis r31,0xc000
|
|
||||||
|
|
||||||
start2:
|
|
||||||
lis r0,0x0123
|
|
||||||
ori r0,r0,0x4567
|
|
||||||
stw r0,0(r31)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Read one value back
|
|
||||||
* ptr = (volatile unsigned long *)addr;
|
|
||||||
* val = *ptr;
|
|
||||||
*/
|
|
||||||
|
|
||||||
lwz r0,0(r31)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* One pci config write
|
|
||||||
* ibmPciConfigWrite(0x2e, 2, 0x1234);
|
|
||||||
*/
|
|
||||||
/* subsystem id */
|
|
||||||
|
|
||||||
li r4,0x002C
|
|
||||||
oris r4,r4,0x8000
|
|
||||||
lis r3,0xEEC0
|
|
||||||
stwbrx r4,0,r3
|
|
||||||
sync
|
|
||||||
|
|
||||||
li r5,0x1234
|
|
||||||
ori r3,r3,0x4
|
|
||||||
stwbrx r5,0,r3
|
|
||||||
sync
|
|
||||||
|
|
||||||
b start2
|
|
||||||
|
|
||||||
blr /* never reached !!!! */
|
|
||||||
|
|
||||||
.globl write_with_less_sync
|
|
||||||
write_with_less_sync:
|
|
||||||
/*
|
|
||||||
* Write one values to host via pci busmastering
|
|
||||||
* ptr = 0xc0000000 -> 0x01000000 (PCI)
|
|
||||||
* *ptr = 0x01234567;
|
|
||||||
*/
|
|
||||||
addi r31,0,0
|
|
||||||
lis r31,0xc000
|
|
||||||
|
|
||||||
start2b:
|
|
||||||
lis r0,0x0123
|
|
||||||
ori r0,r0,0x4567
|
|
||||||
stw r0,0(r31)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Read one value back
|
|
||||||
* ptr = (volatile unsigned long *)addr;
|
|
||||||
* val = *ptr;
|
|
||||||
*/
|
|
||||||
|
|
||||||
lwz r0,0(r31)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* One pci config write
|
|
||||||
* ibmPciConfigWrite(0x2e, 2, 0x1234);
|
|
||||||
*/
|
|
||||||
/* subsystem id */
|
|
||||||
|
|
||||||
li r4,0x002C
|
|
||||||
oris r4,r4,0x8000
|
|
||||||
lis r3,0xEEC0
|
|
||||||
stwbrx r4,0,r3
|
|
||||||
sync
|
|
||||||
|
|
||||||
li r5,0x1234
|
|
||||||
ori r3,r3,0x4
|
|
||||||
stwbrx r5,0,r3
|
|
||||||
/* sync */
|
|
||||||
|
|
||||||
b start2b
|
|
||||||
|
|
||||||
blr /* never reached !!!! */
|
|
||||||
|
|
||||||
.globl write_with_more_sync
|
|
||||||
write_with_more_sync:
|
|
||||||
/*
|
|
||||||
* Write one values to host via pci busmastering
|
|
||||||
* ptr = 0xc0000000 -> 0x01000000 (PCI)
|
|
||||||
* *ptr = 0x01234567;
|
|
||||||
*/
|
|
||||||
addi r31,0,0
|
|
||||||
lis r31,0xc000
|
|
||||||
|
|
||||||
start3:
|
|
||||||
lis r0,0x0123
|
|
||||||
ori r0,r0,0x4567
|
|
||||||
stw r0,0(r31)
|
|
||||||
sync
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Read one value back
|
|
||||||
* ptr = (volatile unsigned long *)addr;
|
|
||||||
* val = *ptr;
|
|
||||||
*/
|
|
||||||
|
|
||||||
lwz r0,0(r31)
|
|
||||||
sync
|
|
||||||
|
|
||||||
/*
|
|
||||||
* One pci config write
|
|
||||||
* ibmPciConfigWrite(0x2e, 2, 0x1234);
|
|
||||||
*/
|
|
||||||
/* subsystem id (PCIC0_SBSYSVID)*/
|
|
||||||
|
|
||||||
li r4,0x002C
|
|
||||||
oris r4,r4,0x8000
|
|
||||||
lis r3,0xEEC0
|
|
||||||
stwbrx r4,0,r3
|
|
||||||
sync
|
|
||||||
|
|
||||||
li r5,0x1234
|
|
||||||
ori r3,r3,0x4
|
|
||||||
stwbrx r5,0,r3
|
|
||||||
sync
|
|
||||||
|
|
||||||
b start3
|
|
||||||
|
|
||||||
blr /* never reached !!!! */
|
|
@ -1,3 +0,0 @@
|
|||||||
CONFIG_PPC=y
|
|
||||||
CONFIG_4xx=y
|
|
||||||
CONFIG_TARGET_PCI405=y
|
|
@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
|
|||||||
|
|
||||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||||
=================================================================================================
|
=================================================================================================
|
||||||
|
PCI405 ppc4xx 405gp - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||||
OCRTC ppc4xx 405gpr - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
OCRTC ppc4xx 405gpr - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||||
HUB405 ppc4xx 405ep - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
HUB405 ppc4xx 405ep - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||||
HH405 ppc4xx 405ep - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
HH405 ppc4xx 405ep - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||||
|
@ -1,294 +0,0 @@
|
|||||||
/*
|
|
||||||
* (C) Copyright 2007
|
|
||||||
* Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
|
|
||||||
*
|
|
||||||
* (C) Copyright 2001-2004
|
|
||||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* board/config.h - configuration options, board specific
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __CONFIG_H
|
|
||||||
#define __CONFIG_H
|
|
||||||
|
|
||||||
/*
|
|
||||||
* High Level Configuration Options
|
|
||||||
* (easy to change)
|
|
||||||
*/
|
|
||||||
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
|
|
||||||
#define CONFIG_PCI405 1 /* ...on a PCI405 board */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_TEXT_BASE 0xFFFD0000
|
|
||||||
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
|
|
||||||
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
|
|
||||||
|
|
||||||
#define CONFIG_BOARD_TYPES 1 /* support board types */
|
|
||||||
|
|
||||||
#define CONFIG_BAUDRATE 115200
|
|
||||||
#define CONFIG_BOOTDELAY 0 /* autoboot after 0 seconds */
|
|
||||||
|
|
||||||
#undef CONFIG_BOOTARGS
|
|
||||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
||||||
"mem_linux=14336k\0" \
|
|
||||||
"optargs=panic=0\0" \
|
|
||||||
"ramargs=setenv bootargs mem=$mem_linux root=/dev/ram rw\0" \
|
|
||||||
"addcons=setenv bootargs $bootargs console=ttyS0,$baudrate $optargs\0" \
|
|
||||||
""
|
|
||||||
#define CONFIG_BOOTCOMMAND "run ramargs;run addcons;loadpci"
|
|
||||||
|
|
||||||
#define CONFIG_PREBOOT /* enable preboot variable */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration.
|
|
||||||
*/
|
|
||||||
#include <config_cmd_default.h>
|
|
||||||
|
|
||||||
#undef CONFIG_CMD_IMLS
|
|
||||||
#undef CONFIG_CMD_ITEST
|
|
||||||
#undef CONFIG_CMD_LOADB
|
|
||||||
#undef CONFIG_CMD_LOADS
|
|
||||||
#undef CONFIG_CMD_NET
|
|
||||||
#undef CONFIG_CMD_NFS
|
|
||||||
|
|
||||||
#define CONFIG_CMD_PCI
|
|
||||||
#define CONFIG_CMD_ELF
|
|
||||||
#define CONFIG_CMD_I2C
|
|
||||||
#define CONFIG_CMD_BSP
|
|
||||||
#define CONFIG_CMD_EEPROM
|
|
||||||
|
|
||||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
||||||
|
|
||||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
|
||||||
|
|
||||||
#define CONFIG_PRAM 2048 /* reserve 2 MB "protected RAM" */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous configurable options
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
|
||||||
|
|
||||||
#if defined(CONFIG_CMD_KGDB)
|
|
||||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
||||||
#else
|
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
||||||
#endif
|
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
|
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
||||||
|
|
||||||
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
||||||
#define CONFIG_SYS_NS16550
|
|
||||||
#define CONFIG_SYS_NS16550_SERIAL
|
|
||||||
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
||||||
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
|
|
||||||
|
|
||||||
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
|
|
||||||
#define CONFIG_SYS_BASE_BAUD 691200
|
|
||||||
|
|
||||||
/* The following table includes the supported baudrates */
|
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
||||||
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
|
|
||||||
57600, 115200, 230400, 460800, 921600 }
|
|
||||||
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
||||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
|
||||||
|
|
||||||
#undef CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
|
||||||
|
|
||||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* PCI stuff
|
|
||||||
*-----------------------------------------------------------------------
|
|
||||||
*/
|
|
||||||
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
|
|
||||||
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
|
||||||
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
|
||||||
|
|
||||||
#define CONFIG_PCI /* include pci support */
|
|
||||||
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
|
|
||||||
#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci host function */
|
|
||||||
#undef CONFIG_PCI_PNP /* no pci plug-and-play */
|
|
||||||
/* resource configuration */
|
|
||||||
|
|
||||||
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
|
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0407 /* PCI Device ID: PCI-405 */
|
|
||||||
#define CONFIG_SYS_PCI_CLASSCODE 0x0280 /* PCI Class Code: Network/Other*/
|
|
||||||
#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1MS 0xff000001 /* 16MB, enable hard-wired to 1 */
|
|
||||||
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_PCI_PTM2LA 0xef600000 /* point to internal regs */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2MS 0xffe00001 /* 2MB, enable */
|
|
||||||
#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Start addresses for the final memory configuration
|
|
||||||
* (Set up by the startup code)
|
|
||||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
||||||
#define CONFIG_SYS_FLASH_BASE 0xFFFD0000
|
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
||||||
#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
|
|
||||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* For booting Linux, the board info and command line data
|
|
||||||
* have to be in the first 8 MB of memory, since this is
|
|
||||||
* the maximum mapped by the Linux kernel during initialization.
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FLASH organization
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
||||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
|
|
||||||
#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
|
|
||||||
#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
|
|
||||||
/*
|
|
||||||
* The following defines are added for buggy IOP480 byte interface.
|
|
||||||
* All other boards should use the standard values (CPCI405 etc.)
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
|
|
||||||
#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
|
|
||||||
#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
|
||||||
|
|
||||||
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
|
||||||
#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
|
|
||||||
#define CONFIG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars*/
|
|
||||||
/* total size of a CAT24WC08 is 1024 bytes */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
|
|
||||||
#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* I2C EEPROM (CAT24WC16) for environment
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_I2C
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_CH0
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
|
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
|
|
||||||
|
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
|
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
|
||||||
/* mask of address bits that overflow into the "EEPROM chip address" */
|
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
|
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
|
|
||||||
/* 16 byte page write mode using*/
|
|
||||||
/* last 4 bits of the address */
|
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Init Memory Controller:
|
|
||||||
*
|
|
||||||
* BR0/1 and OR0/1 (FLASH)
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define FLASH_BASE0_PRELIM 0xFFE00000 /* FLASH bank #0 */
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* External Bus Controller (EBC) Setup
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* Memory Bank 0 (Flash Bank 0) initialization */
|
|
||||||
#define CONFIG_SYS_EBC_PB0AP 0x92015480
|
|
||||||
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
|
|
||||||
|
|
||||||
/* Memory Bank 1 (NVRAM/RTC) initialization */
|
|
||||||
#define CONFIG_SYS_EBC_PB1AP 0x01005280 /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1 */
|
|
||||||
#define CONFIG_SYS_EBC_PB1CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
|
|
||||||
|
|
||||||
/* Memory Bank 2 (CAN0, 1) initialization */
|
|
||||||
#define CONFIG_SYS_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
|
||||||
/*#define CONFIG_SYS_EBC_PB2AP 0x038056C0 / * BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
|
||||||
#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
|
|
||||||
|
|
||||||
/* Memory Bank 3 (FPGA internal) initialization */
|
|
||||||
#define CONFIG_SYS_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
|
||||||
#define CONFIG_SYS_EBC_PB3CR 0xF041C000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=32bit */
|
|
||||||
#define CONFIG_SYS_FPGA_BASE_ADDR 0xF0400000
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FPGA stuff
|
|
||||||
*/
|
|
||||||
/* FPGA internal regs */
|
|
||||||
#define CONFIG_SYS_FPGA_MODE 0x00
|
|
||||||
#define CONFIG_SYS_FPGA_STATUS 0x02
|
|
||||||
#define CONFIG_SYS_FPGA_TS 0x04
|
|
||||||
#define CONFIG_SYS_FPGA_TS_LOW 0x06
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP0 0x10
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP0_LOW 0x12
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP1 0x14
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP1_LOW 0x16
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP2 0x18
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP2_LOW 0x1a
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP3 0x1c
|
|
||||||
#define CONFIG_SYS_FPGA_TS_CAP3_LOW 0x1e
|
|
||||||
|
|
||||||
/* FPGA Mode Reg */
|
|
||||||
#define CONFIG_SYS_FPGA_MODE_CF_RESET 0x0001
|
|
||||||
#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100
|
|
||||||
#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR 0x1000
|
|
||||||
#define CONFIG_SYS_FPGA_MODE_TS_CLEAR 0x2000
|
|
||||||
|
|
||||||
/* FPGA Status Reg */
|
|
||||||
#define CONFIG_SYS_FPGA_STATUS_DIP0 0x0001
|
|
||||||
#define CONFIG_SYS_FPGA_STATUS_DIP1 0x0002
|
|
||||||
#define CONFIG_SYS_FPGA_STATUS_DIP2 0x0004
|
|
||||||
#define CONFIG_SYS_FPGA_STATUS_FLASH 0x0008
|
|
||||||
#define CONFIG_SYS_FPGA_STATUS_TS_IRQ 0x1000
|
|
||||||
|
|
||||||
#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
|
|
||||||
#define CONFIG_SYS_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for XC2S15 */
|
|
||||||
|
|
||||||
/* FPGA program pin configuration */
|
|
||||||
#define CONFIG_SYS_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
|
|
||||||
#define CONFIG_SYS_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
|
|
||||||
#define CONFIG_SYS_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
|
|
||||||
#define CONFIG_SYS_FPGA_INIT 0x00400000 /* FPGA init pin (ppc input) */
|
|
||||||
#define CONFIG_SYS_FPGA_DONE 0x00800000 /* FPGA done pin (ppc input) */
|
|
||||||
/* new INIT and DONE pins since board revision 1.2 (for PPC405GPr support) */
|
|
||||||
#define CONFIG_SYS_FPGA_INIT_V12 0x00008000 /* FPGA init pin (ppc input) */
|
|
||||||
#define CONFIG_SYS_FPGA_DONE_V12 0x00010000 /* FPGA done pin (ppc input) */
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Definitions for initial stack pointer and data area (in data cache)
|
|
||||||
*/
|
|
||||||
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
|
|
||||||
#define CONFIG_SYS_TEMP_STACK_OCM 1
|
|
||||||
/* On Chip Memory location */
|
|
||||||
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
|
|
||||||
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
|
|
||||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
|
|
||||||
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
||||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
||||||
|
|
||||||
#endif /* __CONFIG_H */
|
|
Loading…
Reference in New Issue
Block a user