Make DDR interleaving mode work correctly

Fix some bugs:
  1. Correctly set intlv_ctl in cs_config.
  2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
  3. Set base_address and total memory for each ddr controller in memory
     controller interleaving mode.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
This commit is contained in:
Haiying Wang 2008-10-03 12:36:39 -04:00 committed by Wolfgang Denk
parent 1c9aa76bf9
commit dbbbb3abef
3 changed files with 66 additions and 12 deletions

View File

@ -95,16 +95,10 @@ static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
col_bits_cs_n = dimm_params[i/2].n_col_addr - 8;
}
/* FIXME: intlv_en, intlv_ctl only on CS0_CONFIG */
if (i != 0) {
intlv_en = 0;
intlv_ctl = 0;
}
ddr->cs[i].config = (0
| ((cs_n_en & 0x1) << 31)
| ((intlv_en & 0x3) << 29)
| ((intlv_en & 0xf) << 24)
| ((intlv_ctl & 0xf) << 24)
| ((ap_n_en & 0x1) << 23)
/* XXX: some implementation only have 1 bit starting at left */
@ -874,8 +868,13 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
phys_size_t sa = 0;
phys_size_t ea = 0;
if (popts->ba_intlv_ctl && i > 0) {
/* Don't set up boundaries if bank interleaving */
if (popts->ba_intlv_ctl && (i > 0) &&
((popts->ba_intlv_ctl & 0x60) != FSL_DDR_CS2_CS3 )) {
/* Don't set up boundaries for other CS
* other than CS0, if bank interleaving
* is enabled and not CS2+CS3 interleaved.
*/
break;
}
@ -894,7 +893,9 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
* on each controller is twice the amount present on
* each controller.
*/
ea = (2 * common_dimm->total_mem >> dbw_cap_adj) - 1;
unsigned long long rank_density
= dimm_params[0].capacity;
ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
}
else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) {
/*
@ -906,8 +907,44 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
* controller needs to be programmed into its
* respective CS0_BNDS.
*/
sa = common_dimm->base_address;
ea = sa + (common_dimm->total_mem >> dbw_cap_adj) - 1;
unsigned long long rank_density
= dimm_params[i/2].rank_density;
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
/* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS
* needs to be set.
*/
sa = common_dimm->base_address;
ea = sa + (4 * (rank_density >> dbw_cap_adj))-1;
break;
case FSL_DDR_CS0_CS1_AND_CS2_CS3:
/* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS
* and CS2_CNDS need to be set.
*/
if (!(i&1)) {
sa = dimm_params[i/2].base_address;
ea = sa + (i * (rank_density >>
dbw_cap_adj)) - 1;
}
break;
case FSL_DDR_CS0_CS1:
/* CS0+CS1 interleaving, CS0_CNDS needs
* to be set
*/
sa = common_dimm->base_address;
ea = sa + (2 * (rank_density >> dbw_cap_adj))-1;
break;
case FSL_DDR_CS2_CS3:
/* CS2+CS3 interleaving*/
if (i == 2) {
sa = dimm_params[i/2].base_address;
ea = sa + (2 * (rank_density >>
dbw_cap_adj)) - 1;
}
break;
default: /* No bank(chip-select) interleaving */
break;
}
}
else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) {
/*

View File

@ -179,6 +179,7 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo,
if (*memctl_interleaving) {
phys_addr_t addr;
phys_size_t total_mem_per_ctlr = 0;
/*
* If interleaving between memory controllers,
@ -197,14 +198,18 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo,
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
addr = 0;
pinfo->common_timing_params[i].base_address =
(phys_addr_t)addr;
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
unsigned long long cap
= pinfo->dimm_params[i][j].capacity;
pinfo->dimm_params[i][j].base_address = addr;
addr += (phys_addr_t)(cap >> dbw_cap_adj[i]);
total_mem_per_ctlr += cap >> dbw_cap_adj[i];
}
}
pinfo->common_timing_params[0].total_mem = total_mem_per_ctlr;
} else {
/*
* Simple linear assignment if memory

View File

@ -36,6 +36,18 @@ typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#endif
/* define bank(chip select) interleaving mode */
#define FSL_DDR_CS0_CS1 0x40
#define FSL_DDR_CS2_CS3 0x20
#define FSL_DDR_CS0_CS1_AND_CS2_CS3 (FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3)
#define FSL_DDR_CS0_CS1_CS2_CS3 (FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04)
/* define memory controller interleaving mode */
#define FSL_DDR_CACHE_LINE_INTERLEAVING 0x0
#define FSL_DDR_PAGE_INTERLEAVING 0x1
#define FSL_DDR_BANK_INTERLEAVING 0x2
#define FSL_DDR_SUPERBANK_INTERLEAVING 0x3
/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
struct {