mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-28 15:40:29 +09:00
ARM: dts: sync amlogic G12A/G12B/SM1 DT from Linux 5.8-rc1
This imports the changes and the new Odroid-C4 board from the Linux commit b3a9e3b9622a ("Linux 5.8-rc1"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
This commit is contained in:
parent
6de936b011
commit
da77a787ff
@ -161,6 +161,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
|||||||
meson-g12b-odroid-n2.dtb \
|
meson-g12b-odroid-n2.dtb \
|
||||||
meson-g12b-a311d-khadas-vim3.dtb \
|
meson-g12b-a311d-khadas-vim3.dtb \
|
||||||
meson-sm1-khadas-vim3l.dtb \
|
meson-sm1-khadas-vim3l.dtb \
|
||||||
|
meson-sm1-odroid-c4.dtb \
|
||||||
meson-sm1-sei610.dtb
|
meson-sm1-sei610.dtb
|
||||||
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
|
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
|
||||||
tegra20-medcom-wide.dtb \
|
tegra20-medcom-wide.dtb \
|
||||||
|
@ -250,6 +250,17 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
acodec: audio-controller@32000 {
|
||||||
|
compatible = "amlogic,t9015";
|
||||||
|
reg = <0x0 0x32000 0x0 0x14>;
|
||||||
|
#sound-dai-cells = <0>;
|
||||||
|
sound-name-prefix = "ACODEC";
|
||||||
|
clocks = <&clkc CLKID_AUDIO_CODEC>;
|
||||||
|
clock-names = "pclk";
|
||||||
|
resets = <&reset RESET_AUDIO_CODEC>;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
periphs: bus@34400 {
|
periphs: bus@34400 {
|
||||||
compatible = "simple-bus";
|
compatible = "simple-bus";
|
||||||
reg = <0x0 0x34400 0x0 0x400>;
|
reg = <0x0 0x34400 0x0 0x400>;
|
||||||
@ -2319,7 +2330,7 @@
|
|||||||
reg = <0x0 0xff400000 0x0 0x40000>;
|
reg = <0x0 0xff400000 0x0 0x40000>;
|
||||||
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
|
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
|
||||||
clock-names = "ddr";
|
clock-names = "otg";
|
||||||
phys = <&usb2_phy1>;
|
phys = <&usb2_phy1>;
|
||||||
phy-names = "usb2-phy";
|
phy-names = "usb2-phy";
|
||||||
dr_mode = "peripheral";
|
dr_mode = "peripheral";
|
||||||
|
@ -343,6 +343,15 @@
|
|||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
toacodec: audio-controller@740 {
|
||||||
|
compatible = "amlogic,g12a-toacodec";
|
||||||
|
reg = <0x0 0x740 0x0 0x4>;
|
||||||
|
#sound-dai-cells = <1>;
|
||||||
|
sound-name-prefix = "TOACODEC";
|
||||||
|
resets = <&clkc_audio AUD_RESET_TOACODEC>;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
tohdmitx: audio-controller@744 {
|
tohdmitx: audio-controller@744 {
|
||||||
compatible = "amlogic,g12a-tohdmitx";
|
compatible = "amlogic,g12a-tohdmitx";
|
||||||
reg = <0x0 0x744 0x0 0x4>;
|
reg = <0x0 0x744 0x0 0x4>;
|
||||||
@ -354,29 +363,6 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&cpu_thermal {
|
|
||||||
cooling-maps {
|
|
||||||
map0 {
|
|
||||||
trip = <&cpu_passive>;
|
|
||||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
||||||
};
|
|
||||||
map1 {
|
|
||||||
trip = <&cpu_hot>;
|
|
||||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
||||||
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
ðmac {
|
ðmac {
|
||||||
power-domains = <&pwrc PWRC_G12A_ETH_ID>;
|
power-domains = <&pwrc PWRC_G12A_ETH_ID>;
|
||||||
};
|
};
|
||||||
|
@ -51,11 +51,11 @@
|
|||||||
sound {
|
sound {
|
||||||
compatible = "amlogic,axg-sound-card";
|
compatible = "amlogic,axg-sound-card";
|
||||||
model = "G12B-KHADAS-VIM3";
|
model = "G12B-KHADAS-VIM3";
|
||||||
audio-aux-devs = <&tdmout_b>;
|
audio-aux-devs = <&tdmout_a>;
|
||||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
|
||||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
|
||||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
|
||||||
"TDM_B Playback", "TDMOUT_B OUT";
|
"TDM_A Playback", "TDMOUT_A OUT";
|
||||||
|
|
||||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||||
<&clkc CLKID_MPLL0>,
|
<&clkc CLKID_MPLL0>,
|
||||||
@ -80,7 +80,7 @@
|
|||||||
|
|
||||||
/* 8ch hdmi interface */
|
/* 8ch hdmi interface */
|
||||||
dai-link-3 {
|
dai-link-3 {
|
||||||
sound-dai = <&tdmif_b>;
|
sound-dai = <&tdmif_a>;
|
||||||
dai-format = "i2s";
|
dai-format = "i2s";
|
||||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||||
@ -89,7 +89,7 @@
|
|||||||
mclk-fs = <256>;
|
mclk-fs = <256>;
|
||||||
|
|
||||||
codec {
|
codec {
|
||||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -154,6 +154,10 @@
|
|||||||
clock-latency = <50000>;
|
clock-latency = <50000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&frddr_a {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
&frddr_b {
|
&frddr_b {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
@ -178,11 +182,11 @@
|
|||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
&tdmif_b {
|
&tdmif_a {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
&tdmout_b {
|
&tdmout_a {
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -65,6 +65,11 @@
|
|||||||
opp-hz = /bits/ 64 <1896000000>;
|
opp-hz = /bits/ 64 <1896000000>;
|
||||||
opp-microvolt = <981000>;
|
opp-microvolt = <981000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
opp-1992000000 {
|
||||||
|
opp-hz = /bits/ 64 <1992000000>;
|
||||||
|
opp-microvolt = <1001000>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
cpub_opp_table_1: opp-table-1 {
|
cpub_opp_table_1: opp-table-1 {
|
||||||
@ -120,5 +125,15 @@
|
|||||||
opp-hz = /bits/ 64 <1704000000>;
|
opp-hz = /bits/ 64 <1704000000>;
|
||||||
opp-microvolt = <891000>;
|
opp-microvolt = <891000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
opp-1800000000 {
|
||||||
|
opp-hz = /bits/ 64 <1800000000>;
|
||||||
|
opp-microvolt = <981000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
opp-1908000000 {
|
||||||
|
opp-hz = /bits/ 64 <1908000000>;
|
||||||
|
opp-microvolt = <1022000>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
@ -113,3 +113,25 @@
|
|||||||
compatible = "amlogic,g12b-clkc";
|
compatible = "amlogic,g12b-clkc";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&cpu_thermal {
|
||||||
|
cooling-maps {
|
||||||
|
map0 {
|
||||||
|
trip = <&cpu_passive>;
|
||||||
|
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||||
|
};
|
||||||
|
map1 {
|
||||||
|
trip = <&cpu_hot>;
|
||||||
|
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
@ -39,13 +39,13 @@
|
|||||||
leds {
|
leds {
|
||||||
compatible = "gpio-leds";
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
white {
|
led-white {
|
||||||
label = "vim3:white:sys";
|
label = "vim3:white:sys";
|
||||||
gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
|
||||||
linux,default-trigger = "heartbeat";
|
linux,default-trigger = "heartbeat";
|
||||||
};
|
};
|
||||||
|
|
||||||
red {
|
led-red {
|
||||||
label = "vim3:red";
|
label = "vim3:red";
|
||||||
gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
402
arch/arm/dts/meson-sm1-odroid-c4.dts
Normal file
402
arch/arm/dts/meson-sm1-odroid-c4.dts
Normal file
@ -0,0 +1,402 @@
|
|||||||
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include "meson-sm1.dtsi"
|
||||||
|
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||||
|
#include <dt-bindings/leds/common.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
|
||||||
|
model = "Hardkernel ODROID-C4";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &uart_AO;
|
||||||
|
ethernet0 = ðmac;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
memory@0 {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x0 0x0 0x0 0x40000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
emmc_pwrseq: emmc-pwrseq {
|
||||||
|
compatible = "mmc-pwrseq-emmc";
|
||||||
|
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led-blue {
|
||||||
|
color = <LED_COLOR_ID_BLUE>;
|
||||||
|
function = LED_FUNCTION_STATUS;
|
||||||
|
gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
|
||||||
|
linux,default-trigger = "heartbeat";
|
||||||
|
panic-indicator;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
tflash_vdd: regulator-tflash_vdd {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
|
||||||
|
regulator-name = "TFLASH_VDD";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
|
||||||
|
gpio = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
tf_io: gpio-regulator-tf_io {
|
||||||
|
compatible = "regulator-gpio";
|
||||||
|
|
||||||
|
regulator-name = "TF_IO";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
|
||||||
|
gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
|
||||||
|
gpios-states = <0>;
|
||||||
|
|
||||||
|
states = <3300000 0>,
|
||||||
|
<1800000 1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
flash_1v8: regulator-flash_1v8 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "FLASH_1V8";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
vin-supply = <&vcc_3v3>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
main_12v: regulator-main_12v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "12V";
|
||||||
|
regulator-min-microvolt = <12000000>;
|
||||||
|
regulator-max-microvolt = <12000000>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
vcc_5v: regulator-vcc_5v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "5V";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
regulator-always-on;
|
||||||
|
vin-supply = <&main_12v>;
|
||||||
|
};
|
||||||
|
|
||||||
|
vcc_1v8: regulator-vcc_1v8 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "VCC_1V8";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
vin-supply = <&vcc_3v3>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
vcc_3v3: regulator-vcc_3v3 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "VCC_3V3";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
vin-supply = <&vddao_3v3>;
|
||||||
|
regulator-always-on;
|
||||||
|
/* FIXME: actually controlled by VDDCPU_B_EN */
|
||||||
|
};
|
||||||
|
|
||||||
|
vddcpu: regulator-vddcpu {
|
||||||
|
/*
|
||||||
|
* MP8756GD Regulator.
|
||||||
|
*/
|
||||||
|
compatible = "pwm-regulator";
|
||||||
|
|
||||||
|
regulator-name = "VDDCPU";
|
||||||
|
regulator-min-microvolt = <721000>;
|
||||||
|
regulator-max-microvolt = <1022000>;
|
||||||
|
|
||||||
|
vin-supply = <&main_12v>;
|
||||||
|
|
||||||
|
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||||
|
pwm-dutycycle-range = <100 0>;
|
||||||
|
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
hub_5v: regulator-hub_5v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "HUB_5V";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
vin-supply = <&vcc_5v>;
|
||||||
|
|
||||||
|
/* Connected to the Hub CHIPENABLE, LOW sets low power state */
|
||||||
|
gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
};
|
||||||
|
|
||||||
|
usb_pwr_en: regulator-usb_pwr_en {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "USB_PWR_EN";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
vin-supply = <&vcc_5v>;
|
||||||
|
|
||||||
|
/* Connected to the microUSB port power enable */
|
||||||
|
gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
};
|
||||||
|
|
||||||
|
vddao_1v8: regulator-vddao_1v8 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "VDDAO_1V8";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
vin-supply = <&vddao_3v3>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
vddao_3v3: regulator-vddao_3v3 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "VDDAO_3V3";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
vin-supply = <&main_12v>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
hdmi-connector {
|
||||||
|
compatible = "hdmi-connector";
|
||||||
|
type = "a";
|
||||||
|
|
||||||
|
port {
|
||||||
|
hdmi_connector_in: endpoint {
|
||||||
|
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&cpu0 {
|
||||||
|
cpu-supply = <&vddcpu>;
|
||||||
|
operating-points-v2 = <&cpu_opp_table>;
|
||||||
|
clocks = <&clkc CLKID_CPU_CLK>;
|
||||||
|
clock-latency = <50000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&cpu1 {
|
||||||
|
cpu-supply = <&vddcpu>;
|
||||||
|
operating-points-v2 = <&cpu_opp_table>;
|
||||||
|
clocks = <&clkc CLKID_CPU1_CLK>;
|
||||||
|
clock-latency = <50000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&cpu2 {
|
||||||
|
cpu-supply = <&vddcpu>;
|
||||||
|
operating-points-v2 = <&cpu_opp_table>;
|
||||||
|
clocks = <&clkc CLKID_CPU2_CLK>;
|
||||||
|
clock-latency = <50000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&cpu3 {
|
||||||
|
cpu-supply = <&vddcpu>;
|
||||||
|
operating-points-v2 = <&cpu_opp_table>;
|
||||||
|
clocks = <&clkc CLKID_CPU3_CLK>;
|
||||||
|
clock-latency = <50000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&ext_mdio {
|
||||||
|
external_phy: ethernet-phy@0 {
|
||||||
|
/* Realtek RTL8211F (0x001cc916) */
|
||||||
|
reg = <0>;
|
||||||
|
max-speed = <1000>;
|
||||||
|
|
||||||
|
interrupt-parent = <&gpio_intc>;
|
||||||
|
/* MAC_INTR on GPIOZ_14 */
|
||||||
|
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
ðmac {
|
||||||
|
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
phy-mode = "rgmii";
|
||||||
|
phy-handle = <&external_phy>;
|
||||||
|
amlogic,tx-delay-ns = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio {
|
||||||
|
gpio-line-names =
|
||||||
|
/* GPIOZ */
|
||||||
|
"", "", "", "", "", "", "", "",
|
||||||
|
"", "", "", "", "", "", "", "",
|
||||||
|
/* GPIOH */
|
||||||
|
"", "", "", "", "",
|
||||||
|
"PIN_36", /* GPIOH_5 */
|
||||||
|
"PIN_26", /* GPIOH_6 */
|
||||||
|
"PIN_32", /* GPIOH_7 */
|
||||||
|
"",
|
||||||
|
/* BOOT */
|
||||||
|
"", "", "", "", "", "", "", "",
|
||||||
|
"", "", "", "", "", "", "", "",
|
||||||
|
/* GPIOC */
|
||||||
|
"", "", "", "", "", "", "", "",
|
||||||
|
/* GPIOA */
|
||||||
|
"", "", "", "", "", "", "", "",
|
||||||
|
"", "", "", "", "", "",
|
||||||
|
"PIN_27", /* GPIOA_14 */
|
||||||
|
"PIN_28", /* GPIOA_15 */
|
||||||
|
/* GPIOX */
|
||||||
|
"PIN_16", /* GPIOX_0 */
|
||||||
|
"PIN_18", /* GPIOX_1 */
|
||||||
|
"PIN_22", /* GPIOX_2 */
|
||||||
|
"PIN_11", /* GPIOX_3 */
|
||||||
|
"PIN_13", /* GPIOX_4 */
|
||||||
|
"PIN_7", /* GPIOX_5 */
|
||||||
|
"PIN_33", /* GPIOX_6 */
|
||||||
|
"PIN_15", /* GPIOX_7 */
|
||||||
|
"PIN_19", /* GPIOX_8 */
|
||||||
|
"PIN_21", /* GPIOX_9 */
|
||||||
|
"PIN_24", /* GPIOX_10 */
|
||||||
|
"PIN_23", /* GPIOX_11 */
|
||||||
|
"PIN_8", /* GPIOX_12 */
|
||||||
|
"PIN_10", /* GPIOX_13 */
|
||||||
|
"PIN_29", /* GPIOX_14 */
|
||||||
|
"PIN_31", /* GPIOX_15 */
|
||||||
|
"PIN_12", /* GPIOX_16 */
|
||||||
|
"PIN_3", /* GPIOX_17 */
|
||||||
|
"PIN_5", /* GPIOX_18 */
|
||||||
|
"PIN_35"; /* GPIOX_19 */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* WARNING: The USB Hub on the Odroid-C4 needs a reset signal
|
||||||
|
* to be turned high in order to be detected by the USB Controller
|
||||||
|
* This signal should be handled by a USB specific power sequence
|
||||||
|
* in order to reset the Hub when USB bus is powered down.
|
||||||
|
*/
|
||||||
|
usb-hub {
|
||||||
|
gpio-hog;
|
||||||
|
gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
||||||
|
output-high;
|
||||||
|
line-name = "usb-hub-reset";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio_ao {
|
||||||
|
gpio-line-names =
|
||||||
|
/* GPIOAO */
|
||||||
|
"", "", "", "",
|
||||||
|
"PIN_47", /* GPIOAO_4 */
|
||||||
|
"", "",
|
||||||
|
"PIN_45", /* GPIOAO_7 */
|
||||||
|
"PIN_46", /* GPIOAO_8 */
|
||||||
|
"PIN_44", /* GPIOAO_9 */
|
||||||
|
"PIN_42", /* GPIOAO_10 */
|
||||||
|
"",
|
||||||
|
/* GPIOE */
|
||||||
|
"", "", "";
|
||||||
|
};
|
||||||
|
|
||||||
|
&hdmi_tx {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
hdmi-supply = <&vcc_5v>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&hdmi_tx_tmds_port {
|
||||||
|
hdmi_tx_tmds_out: endpoint {
|
||||||
|
remote-endpoint = <&hdmi_connector_in>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&ir {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&remote_input_ao_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
linux,rc-map-name = "rc-odroid";
|
||||||
|
};
|
||||||
|
|
||||||
|
&pwm_AO_cd {
|
||||||
|
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
clocks = <&xtal>;
|
||||||
|
clock-names = "clkin1";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&saradc {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* SD card */
|
||||||
|
&sd_emmc_b {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&sdcard_c_pins>;
|
||||||
|
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||||
|
pinctrl-names = "default", "clk-gate";
|
||||||
|
|
||||||
|
bus-width = <4>;
|
||||||
|
cap-sd-highspeed;
|
||||||
|
max-frequency = <200000000>;
|
||||||
|
sd-uhs-sdr12;
|
||||||
|
sd-uhs-sdr25;
|
||||||
|
sd-uhs-sdr50;
|
||||||
|
sd-uhs-sdr104;
|
||||||
|
disable-wp;
|
||||||
|
|
||||||
|
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||||
|
vmmc-supply = <&tflash_vdd>;
|
||||||
|
vqmmc-supply = <&tf_io>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* eMMC */
|
||||||
|
&sd_emmc_c {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||||
|
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||||
|
pinctrl-names = "default", "clk-gate";
|
||||||
|
|
||||||
|
bus-width = <8>;
|
||||||
|
cap-mmc-highspeed;
|
||||||
|
mmc-ddr-1_8v;
|
||||||
|
mmc-hs200-1_8v;
|
||||||
|
max-frequency = <200000000>;
|
||||||
|
disable-wp;
|
||||||
|
|
||||||
|
mmc-pwrseq = <&emmc_pwrseq>;
|
||||||
|
vmmc-supply = <&vcc_3v3>;
|
||||||
|
vqmmc-supply = <&flash_1v8>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart_AO {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-0 = <&uart_ao_a_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb {
|
||||||
|
status = "okay";
|
||||||
|
vbus-supply = <&usb_pwr_en>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb2_phy0 {
|
||||||
|
phy-supply = <&vcc_5v>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb2_phy1 {
|
||||||
|
/* Enable the hub which is connected to this port */
|
||||||
|
phy-supply = <&hub_5v>;
|
||||||
|
};
|
@ -104,7 +104,7 @@
|
|||||||
leds {
|
leds {
|
||||||
compatible = "gpio-leds";
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
bluetooth {
|
led-bluetooth {
|
||||||
label = "sei610:blue:bt";
|
label = "sei610:blue:bt";
|
||||||
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||||
default-state = "off";
|
default-state = "off";
|
||||||
|
@ -56,6 +56,7 @@
|
|||||||
reg = <0x0 0x0>;
|
reg = <0x0 0x0>;
|
||||||
enable-method = "psci";
|
enable-method = "psci";
|
||||||
next-level-cache = <&l2>;
|
next-level-cache = <&l2>;
|
||||||
|
#cooling-cells = <2>;
|
||||||
};
|
};
|
||||||
|
|
||||||
cpu1: cpu@1 {
|
cpu1: cpu@1 {
|
||||||
@ -64,6 +65,7 @@
|
|||||||
reg = <0x0 0x1>;
|
reg = <0x0 0x1>;
|
||||||
enable-method = "psci";
|
enable-method = "psci";
|
||||||
next-level-cache = <&l2>;
|
next-level-cache = <&l2>;
|
||||||
|
#cooling-cells = <2>;
|
||||||
};
|
};
|
||||||
|
|
||||||
cpu2: cpu@2 {
|
cpu2: cpu@2 {
|
||||||
@ -72,6 +74,7 @@
|
|||||||
reg = <0x0 0x2>;
|
reg = <0x0 0x2>;
|
||||||
enable-method = "psci";
|
enable-method = "psci";
|
||||||
next-level-cache = <&l2>;
|
next-level-cache = <&l2>;
|
||||||
|
#cooling-cells = <2>;
|
||||||
};
|
};
|
||||||
|
|
||||||
cpu3: cpu@3 {
|
cpu3: cpu@3 {
|
||||||
@ -80,6 +83,7 @@
|
|||||||
reg = <0x0 0x3>;
|
reg = <0x0 0x3>;
|
||||||
enable-method = "psci";
|
enable-method = "psci";
|
||||||
next-level-cache = <&l2>;
|
next-level-cache = <&l2>;
|
||||||
|
#cooling-cells = <2>;
|
||||||
};
|
};
|
||||||
|
|
||||||
l2: l2-cache0 {
|
l2: l2-cache0 {
|
||||||
@ -466,6 +470,26 @@
|
|||||||
compatible = "amlogic,sm1-clkc";
|
compatible = "amlogic,sm1-clkc";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&cpu_thermal {
|
||||||
|
cooling-maps {
|
||||||
|
map0 {
|
||||||
|
trip = <&cpu_passive>;
|
||||||
|
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||||
|
};
|
||||||
|
|
||||||
|
map1 {
|
||||||
|
trip = <&cpu_hot>;
|
||||||
|
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||||
|
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
ðmac {
|
ðmac {
|
||||||
power-domains = <&pwrc PWRC_SM1_ETH_ID>;
|
power-domains = <&pwrc PWRC_SM1_ETH_ID>;
|
||||||
};
|
};
|
||||||
|
Loading…
Reference in New Issue
Block a user