diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index a5c091eeaa..8002b7efdc 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -27,6 +27,8 @@ #include #elif defined(CONFIG_MACH_SUN9I) #include +#elif defined(CONFIG_MACH_SUN50I_H6) +#include #else #include #endif diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h new file mode 100644 index 0000000000..eeb4da5c3f --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h6.h @@ -0,0 +1,297 @@ +/* + * H6 dram controller register and constant defines + * + * (C) Copyright 2017 Icenowy Zheng + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DRAM_SUN50I_H6_H +#define _SUNXI_DRAM_SUN50I_H6_H + +enum sunxi_dram_type { + SUNXI_DRAM_TYPE_DDR3 = 3, + SUNXI_DRAM_TYPE_DDR4, + SUNXI_DRAM_TYPE_LPDDR2 = 6, + SUNXI_DRAM_TYPE_LPDDR3, +}; + +/* + * The following information is mainly retrieved by disassembly and some FPGA + * test code of sun50iw3 platform. + */ +struct sunxi_mctl_com_reg { + u32 cr; /* 0x000 control register */ + u8 reserved_0x004[4]; /* 0x004 */ + u32 unk_0x008; /* 0x008 */ + u32 tmr; /* 0x00c timer register */ + u8 reserved_0x010[4]; /* 0x010 */ + u32 unk_0x014; /* 0x014 */ + u8 reserved_0x018[8]; /* 0x018 */ + u32 maer0; /* 0x020 master enable register 0 */ + u32 maer1; /* 0x024 master enable register 1 */ + u32 maer2; /* 0x028 master enable register 2 */ + u8 reserved_0x02c[468]; /* 0x02c */ + u32 bwcr; /* 0x200 bandwidth control register */ + u8 reserved_0x204[12]; /* 0x204 */ + /* + * The last master configured by BSP libdram is at 0x49x, so the + * size of this struct array is set to 41 (0x29) now. + */ + struct { + u32 cfg0; /* 0x0 */ + u32 cfg1; /* 0x4 */ + u8 reserved_0x8[8]; /* 0x8 */ + } master[41]; /* 0x210 + index * 0x10 */ +}; +check_member(sunxi_mctl_com_reg, master[40].reserved_0x8, 0x498); + +/* + * The following register information are retrieved from some similar DRAM + * controllers, including the DRAM controllers in Allwinner A23/A80 SoCs, + * Rockchip RK3328 SoC, NXP i.MX7 SoCs and Xilinx Zynq UltraScale+ SoCs. + * + * The DRAM controller in Allwinner A23/A80 SoCs and NXP i.MX7 SoCs seems + * to be older than the one in Allwinner H6, as the DRAMTMG9 register + * is missing in these SoCs. (From the product specifications of these + * SoCs they're not capable of DDR4) + * + * Information sources: + * - dram_sun9i.h and dram_sun8i_a23.h in the same directory. + * - sdram_rk3328.h from the RK3328 TPL DRAM patchset + * - i.MX 7Solo Applications Processor Reference Manual (IMX7SRM) + * - Zynq UltraScale+ MPSoC Register Reference (UG1087) + */ +struct sunxi_mctl_ctl_reg { + u32 mstr; /* 0x000 */ + u32 statr; /* 0x004 unused */ + u32 mstr1; /* 0x008 unused */ + u32 unk_0x00c; /* 0x00c */ + u32 mrctrl0; /* 0x010 unused */ + u32 mrctrl1; /* 0x014 unused */ + u32 mrstatr; /* 0x018 unused */ + u32 mrctrl2; /* 0x01c unused */ + u32 derateen; /* 0x020 unused */ + u32 derateint; /* 0x024 unused */ + u8 reserved_0x028[8]; /* 0x028 */ + u32 pwrctl; /* 0x030 unused */ + u32 pwrtmg; /* 0x034 unused */ + u32 hwlpctl; /* 0x038 unused */ + u8 reserved_0x03c[20]; /* 0x03c */ + u32 rfshctl0; /* 0x050 unused */ + u32 rfshctl1; /* 0x054 unused */ + u8 reserved_0x058[8]; /* 0x05c */ + u32 rfshctl3; /* 0x060 */ + u32 rfshtmg; /* 0x064 */ + u8 reserved_0x068[104]; /* 0x068 reserved for ECC&CRC (from ZynqMP) */ + u32 init[8]; /* 0x0d0 */ + u32 dimmctl; /* 0x0f0 unused */ + u32 rankctl; /* 0x0f4 */ + u8 reserved_0x0f8[8]; /* 0x0f8 */ + u32 dramtmg[17]; /* 0x100 */ + u8 reserved_0x144[60]; /* 0x144 */ + u32 zqctl[3]; /* 0x180 */ + u32 zqstat; /* 0x18c unused */ + u32 dfitmg0; /* 0x190 */ + u32 dfitmg1; /* 0x194 */ + u32 dfilpcfg[2]; /* 0x198 unused */ + u32 dfiupd[3]; /* 0x1a0 */ + u32 reserved_0x1ac; /* 0x1ac */ + u32 dfimisc; /* 0x1b0 */ + u32 dfitmg2; /* 0x1b4 unused, may not exist */ + u8 reserved_0x1b8[8]; /* 0x1b8 */ + u32 dbictl; /* 0x1c0 */ + u8 reserved_0x1c4[60]; /* 0x1c4 */ + u32 addrmap[12]; /* 0x200 */ + u8 reserved_0x230[16]; /* 0x230 */ + u32 odtcfg; /* 0x240 */ + u32 odtmap; /* 0x244 */ + u8 reserved_0x248[8]; /* 0x248 */ + u32 sched[2]; /* 0x250 */ + u8 reserved_0x258[180]; /* 0x258 */ + u32 dbgcmd; /* 0x30c unused */ + u32 dbgstat; /* 0x310 unused */ + u8 reserved_0x314[12]; /* 0x314 */ + u32 swctl; /* 0x320 */ + u32 swstat; /* 0x324 */ +}; +check_member(sunxi_mctl_ctl_reg, swstat, 0x324); + +#define MSTR_DEVICETYPE_DDR3 BIT(0) +#define MSTR_DEVICETYPE_LPDDR2 BIT(2) +#define MSTR_DEVICETYPE_LPDDR3 BIT(3) +#define MSTR_DEVICETYPE_DDR4 BIT(4) +#define MSTR_DEVICETYPE_MASK GENMASK(5, 0) +#define MSTR_2TMODE BIT(10) +#define MSTR_BUSWIDTH_FULL (0 << 12) +#define MSTR_BUSWIDTH_HALF (1 << 12) +#define MSTR_ACTIVE_RANKS(x) (((x == 2) ? 3 : 1) << 24) +#define MSTR_BURST_LENGTH(x) (((x) >> 1) << 16) + +/* + * The following register information is based on Zynq UltraScale+ + * MPSoC Register Reference, as it's the currently only known + * DDR PHY similar to the one used in H6; however although the + * map is similar, the bit fields definitions are different. + * + * Other DesignWare DDR PHY's have similar register names, but the + * offset and definitions are both different. + */ +struct sunxi_mctl_phy_reg { + u32 ver; /* 0x000 guess based on similar PHYs */ + u32 pir; /* 0x004 */ + u8 reserved_0x008[8]; /* 0x008 */ + /* + * The ZynqMP manual didn't document PGCR1, however this register + * exists on H6 and referenced by libdram. + */ + u32 pgcr[8]; /* 0x010 */ + /* + * By comparing the hardware and the ZynqMP manual, the PGSR seems + * to start at 0x34 on H6. + */ + u8 reserved_0x030[4]; /* 0x030 */ + u32 pgsr[3]; /* 0x034 */ + u32 ptr[7]; /* 0x040 */ + /* + * According to ZynqMP reference there's PLLCR0~6 in this area, + * but they're tagged "Type B PLL Only" and H6 seems to have + * no them. + * 0x080 is not present in ZynqMP reference but it seems to be + * present on H6. + */ + u8 reserved_0x05c[36]; /* 0x05c */ + u32 unk_0x080; /* 0x080 */ + u8 reserved_0x084[4]; /* 0x084 */ + u32 dxccr; /* 0x088 */ + u8 reserved_0x08c[4]; /* 0x08c */ + u32 dsgcr; /* 0x090 */ + u8 reserved_0x094[4]; /* 0x094 */ + u32 odtcr; /* 0x098 */ + u8 reserved_0x09c[4]; /* 0x09c */ + u32 aacr; /* 0x0a0 */ + u8 reserved_0x0a4[32]; /* 0x0a4 */ + u32 gpr1; /* 0x0c4 */ + u8 reserved_0x0c8[56]; /* 0x0c8 */ + u32 dcr; /* 0x100 */ + u8 reserved_0x104[12]; /* 0x104 */ + u32 dtpr[7]; /* 0x110 */ + u8 reserved_0x12c[20]; /* 0x12c */ + u32 rdimmgcr[3]; /* 0x140 */ + u8 reserved_0x14c[4]; /* 0x14c */ + u32 rdimmcr[5]; /* 0x150 */ + u8 reserved_0x164[4]; /* 0x164 */ + u32 schcr[2]; /* 0x168 */ + u8 reserved_0x170[16]; /* 0x170 */ + /* + * The ZynqMP manual documents MR0~7, 11~14 and 22. + */ + u32 mr[23]; /* 0x180 */ + u8 reserved_0x1dc[36]; /* 0x1dc */ + u32 dtcr[2]; /* 0x200 */ + u32 dtar[3]; /* 0x208 */ + u8 reserved_0x214[4]; /* 0x214 */ + u32 dtdr[2]; /* 0x218 */ + u8 reserved_0x220[16]; /* 0x220 */ + u32 dtedr0; /* 0x230 */ + u32 dtedr1; /* 0x234 */ + u32 dtedr2; /* 0x238 */ + u32 vtdr; /* 0x23c */ + u32 catr[2]; /* 0x240 */ + u8 reserved_0x248[8]; + u32 dqsdr[3]; /* 0x250 */ + u32 dtedr3; /* 0x25c */ + u8 reserved_0x260[160]; /* 0x260 */ + u32 dcuar; /* 0x300 */ + u32 dcudr; /* 0x304 */ + u32 dcurr; /* 0x308 */ + u32 dculr; /* 0x30c */ + u32 dcugcr; /* 0x310 */ + u32 dcutpr; /* 0x314 */ + u32 dcusr[2]; /* 0x318 */ + u8 reserved_0x320[444]; /* 0x320 */ + u32 rankidr; /* 0x4dc */ + u32 riocr[6]; /* 0x4e0 */ + u8 reserved_0x4f8[8]; /* 0x4f8 */ + u32 aciocr[6]; /* 0x500 */ + u8 reserved_0x518[8]; /* 0x518 */ + u32 iovcr[2]; /* 0x520 */ + u32 vtcr[2]; /* 0x528 */ + u8 reserved_0x530[16]; /* 0x530 */ + u32 acbdlr[17]; /* 0x540 */ + u32 aclcdlr; /* 0x584 */ + u8 reserved_0x588[24]; /* 0x588 */ + u32 acmdlr[2]; /* 0x5a0 */ + u8 reserved_0x5a8[216]; /* 0x5a8 */ + struct { + u32 zqcr; /* 0x00 only the first one valid */ + u32 zqpr[2]; /* 0x04 */ + u32 zqdr[2]; /* 0x0c */ + u32 zqor[2]; /* 0x14 */ + u32 zqsr; /* 0x1c */ + } zq[2]; /* 0x680, 0x6a0 */ + u8 reserved_0x6c0[64]; /* 0x6c0 */ + struct { + u32 gcr[7]; /* 0x00 */ + u8 reserved_0x1c[36]; /* 0x1c */ + u32 bdlr0; /* 0x40 */ + u32 bdlr1; /* 0x44 */ + u32 bdlr2; /* 0x48 */ + u8 reserved_0x4c[4]; /* 0x4c */ + u32 bdlr3; /* 0x50 */ + u32 bdlr4; /* 0x54 */ + u32 bdlr5; /* 0x58 */ + u8 reserved_0x5c[4]; /* 0x5c */ + u32 bdlr6; /* 0x60 */ + u8 reserved_0x64[28]; /* 0x64 */ + u32 lcdlr[6]; /* 0x80 */ + u8 reserved_0x98[8]; /* 0x98 */ + u32 mdlr[2]; /* 0xa0 */ + u8 reserved_0xa8[24]; /* 0xa8 */ + u32 gtr0; /* 0xc0 */ + u8 reserved_0xc4[12]; /* 0xc4 */ + /* + * DXnRSR0 is not documented in ZynqMP manual but + * it's used in libdram. + */ + u32 rsr[4]; /* 0xd0 */ + u32 gsr[4]; /* 0xe0 */ + u8 reserved_0xf0[16]; /* 0xf0 */ + } dx[4]; /* 0x700, 0x800, 0x900, 0xa00 */ +}; +check_member(sunxi_mctl_phy_reg, dx[3].reserved_0xf0, 0xaf0); + +#define PIR_INIT BIT(0) +#define PIR_ZCAL BIT(1) +#define PIR_CA BIT(2) +#define PIR_PLLINIT BIT(4) +#define PIR_DCAL BIT(5) +#define PIR_PHYRST BIT(6) +#define PIR_DRAMRST BIT(7) +#define PIR_DRAMINIT BIT(8) +#define PIR_WL BIT(9) +#define PIR_QSGATE BIT(10) +#define PIR_WLADJ BIT(11) +#define PIR_RDDSKW BIT(12) +#define PIR_WRDSKW BIT(13) +#define PIR_RDEYE BIT(14) +#define PIR_WREYE BIT(15) +#define PIR_VREF BIT(17) +#define PIR_CTLDINIT BIT(18) +#define PIR_DQS2DQ BIT(20) +#define PIR_DCALPSE BIT(29) +#define PIR_ZCALBYP BIT(30) + +#define DCR_LPDDR3 (1 << 0) +#define DCR_DDR3 (3 << 0) +#define DCR_DDR4 (4 << 0) +#define DCR_DDR8BANK BIT(3) + +static inline int ns_to_t(int nanoseconds) +{ + const unsigned int ctrl_freq = CONFIG_DRAM_CLK / 2; + + return DIV_ROUND_UP(ctrl_freq * nanoseconds, 1000); +} + +#endif /* _SUNXI_DRAM_SUN50I_H6_H */ diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index ccf4b35734..32a46797e2 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -42,6 +42,12 @@ config DRAM_SUN9I Select this dram controller driver for Sun9i platforms, like A80. +config DRAM_SUN50I_H6 + bool + help + Select this dram controller driver for some sun50i platforms, + like H6. + config SUN6I_P2WI bool "Allwinner sun6i internal P2WI controller" help diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 97a4f22d8a..43a93e3085 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -38,4 +38,5 @@ obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o obj-$(CONFIG_SPL_SPI_SUNXI) += spl_spi_sunxi.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/ +obj-$(CONFIG_DRAM_SUN50I_H6) += dram_sun50i_h6.o endif diff --git a/arch/arm/mach-sunxi/dram_sun50i_h6.c b/arch/arm/mach-sunxi/dram_sun50i_h6.c new file mode 100644 index 0000000000..6b94cf38c5 --- /dev/null +++ b/arch/arm/mach-sunxi/dram_sun50i_h6.c @@ -0,0 +1,755 @@ +/* + * sun50i H6 platform dram controller init + * + * (C) Copyright 2017 Icenowy Zheng + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include +#include +#include + +/* + * The DRAM controller structure on H6 is similar to the ones on A23/A80: + * they all contains 3 parts, COM, CTL and PHY. (As a note on A33/A83T/H3/A64 + * /H5/R40 CTL and PHY is composed). + * + * COM is allwinner-specific. On H6, the address mapping function is moved + * from COM to CTL (with the standard ADDRMAP registers on DesignWare memory + * controller). + * + * CTL (controller) and PHY is from DesignWare. + * + * The CTL part is a bit similar to the one on A23/A80 (because they all + * originate from DesignWare), but gets more registers added. + * + * The PHY part is quite new, not seen in any previous Allwinner SoCs, and + * not seen on other SoCs in U-Boot. The only SoC that is also known to have + * similar PHY is ZynqMP. + */ + +/* + * The delay parameters below allow to allegedly specify delay times of some + * unknown unit for each individual bit trace in each of the four data bytes + * the 32-bit wide access consists of. Also three control signals can be + * adjusted individually. + */ +#define NR_OF_BYTE_LANES (32 / BITS_PER_BYTE) +/* The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable and DQSN */ +#define WR_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 4) +/* + * The eight data lines (DQn) plus DM, DQS, DQS/DM/DQ Output Enable, DQSN, + * Termination and Power down + */ +#define RD_LINES_PER_BYTE_LANE (BITS_PER_BYTE + 6) +struct dram_para { + u32 clk; + enum sunxi_dram_type type; + u8 cols; + u8 rows; + u8 ranks; + const u8 dx_read_delays[NR_OF_BYTE_LANES][RD_LINES_PER_BYTE_LANE]; + const u8 dx_write_delays[NR_OF_BYTE_LANES][WR_LINES_PER_BYTE_LANE]; +}; + +static void mctl_sys_init(struct dram_para *para); +static void mctl_com_init(struct dram_para *para); +static void mctl_set_timing_lpddr3(struct dram_para *para); +static void mctl_channel_init(struct dram_para *para); + +static void mctl_core_init(struct dram_para *para) +{ + mctl_sys_init(para); + mctl_com_init(para); + switch (para->type) { + case SUNXI_DRAM_TYPE_LPDDR3: + mctl_set_timing_lpddr3(para); + break; + default: + panic("Unsupported DRAM type!"); + }; + mctl_channel_init(para); +} + +static void mctl_phy_pir_init(u32 val) +{ + struct sunxi_mctl_phy_reg * const mctl_phy = + (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + + writel(val | BIT(0), &mctl_phy->pir); + mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0)); +} + +enum { + MBUS_PORT_CPU = 0, + MBUS_PORT_GPU = 1, + MBUS_PORT_MAHB = 2, + MBUS_PORT_DMA = 3, + MBUS_PORT_VE = 4, + MBUS_PORT_CE = 5, + MBUS_PORT_TSC0 = 6, + MBUS_PORT_NDFC0 = 8, + MBUS_PORT_CSI0 = 11, + MBUS_PORT_DI0 = 14, + MBUS_PORT_DI1 = 15, + MBUS_PORT_DE300 = 16, + MBUS_PORT_IOMMU = 25, + MBUS_PORT_VE2 = 26, + MBUS_PORT_USB3 = 37, + MBUS_PORT_PCIE = 38, + MBUS_PORT_VP9 = 39, + MBUS_PORT_HDCP2 = 40, +}; + +enum { + MBUS_QOS_LOWEST = 0, + MBUS_QOS_LOW, + MBUS_QOS_HIGH, + MBUS_QOS_HIGHEST +}; +inline void mbus_configure_port(u8 port, + bool bwlimit, + bool priority, + u8 qos, + u8 waittime, + u8 acs, + u16 bwl0, + u16 bwl1, + u16 bwl2) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0) + | (priority ? (1 << 1) : 0) + | ((qos & 0x3) << 2) + | ((waittime & 0xf) << 4) + | ((acs & 0xff) << 8) + | (bwl0 << 16) ); + const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff); + + debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1); + writel(cfg0, &mctl_com->master[port].cfg0); + writel(cfg1, &mctl_com->master[port].cfg1); +} + +#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2) \ + mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \ + MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2) + +static void mctl_set_master_priority(void) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + + /* enable bandwidth limit windows and set windows size 1us */ + writel(399, &mctl_com->tmr); + writel(BIT(16), &mctl_com->bwcr); + + MBUS_CONF( CPU, true, HIGHEST, 0, 256, 128, 100); + MBUS_CONF( GPU, true, HIGH, 0, 1536, 1400, 256); + MBUS_CONF( MAHB, true, HIGHEST, 0, 512, 256, 96); + MBUS_CONF( DMA, true, HIGH, 0, 256, 100, 80); + MBUS_CONF( VE, true, HIGH, 2, 8192, 5500, 5000); + MBUS_CONF( CE, true, HIGH, 2, 100, 64, 32); + MBUS_CONF( TSC0, true, HIGH, 2, 100, 64, 32); + MBUS_CONF(NDFC0, true, HIGH, 0, 256, 128, 64); + MBUS_CONF( CSI0, true, HIGH, 0, 256, 128, 100); + MBUS_CONF( DI0, true, HIGH, 0, 1024, 256, 64); + MBUS_CONF(DE300, true, HIGHEST, 6, 8192, 2800, 2400); + MBUS_CONF(IOMMU, true, HIGHEST, 0, 100, 64, 32); + MBUS_CONF( VE2, true, HIGH, 2, 8192, 5500, 5000); + MBUS_CONF( USB3, true, HIGH, 0, 256, 128, 64); + MBUS_CONF( PCIE, true, HIGH, 2, 100, 64, 32); + MBUS_CONF( VP9, true, HIGH, 2, 8192, 5500, 5000); + MBUS_CONF(HDCP2, true, HIGH, 2, 100, 64, 32); +} + +static u32 mr_lpddr3[12] = { + 0x00000000, 0x00000043, 0x0000001a, 0x00000001, + 0x00000000, 0x00000000, 0x00000048, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000003, +}; + +/* TODO: flexible timing */ +static void mctl_set_timing_lpddr3(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + struct sunxi_mctl_phy_reg * const mctl_phy = + (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + + u8 tccd = 2; + u8 tfaw = max(ns_to_t(50), 4); + u8 trrd = max(ns_to_t(10), 2); + u8 trcd = max(ns_to_t(24), 2); + u8 trc = ns_to_t(70); + u8 txp = max(ns_to_t(8), 2); + u8 twtr = max(ns_to_t(8), 2); + u8 trtp = max(ns_to_t(8), 2); + u8 twr = max(ns_to_t(15), 2); + u8 trp = ns_to_t(18); + u8 tras = ns_to_t(42); + u8 twtr_sa = ns_to_t(5); + u8 tcksrea = ns_to_t(11); + u16 trefi = ns_to_t(3900) / 32; + u16 trfc = ns_to_t(210); + u16 txsr = ns_to_t(220); + + if (CONFIG_DRAM_CLK % 400 == 0) { + /* Round up these parameters */ + twtr_sa++; + tcksrea++; + } + + u8 tmrw = 5; + u8 tmrd = 5; + u8 tmod = 12; + u8 tcke = 3; + u8 tcksrx = 5; + u8 tcksre = 5; + u8 tckesr = 5; + u8 trasmax = CONFIG_DRAM_CLK / 60; + u8 txs = 4; + u8 txsdll = 4; + u8 txsabort = 4; + u8 txsfast = 4; + + u8 tcl = 5; /* CL 10 */ + u8 tcwl = 3; /* CWL 6 */ + u8 t_rdata_en = twtr_sa + 8; + + u32 tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */ + u32 tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */ + u32 tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 11us */ + u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */ + + u8 twtp = tcwl + 4 + twr + 1; + /* + * The code below for twr2rd and trd2wr follows the IP core's + * document from ZynqMP and i.MX7. The BSP has both number + * substracted by 2. + */ + u8 twr2rd = tcwl + 4 + 1 + twtr; + u8 trd2wr = tcl + 4 + (tcksrea >> 1) - tcwl + 1; + + /* set mode register */ + memcpy(mctl_phy->mr, mr_lpddr3, sizeof(mr_lpddr3)); + + /* set DRAM timing */ + writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras, + &mctl_ctl->dramtmg[0]); + writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]); + writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd, + &mctl_ctl->dramtmg[2]); + writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]); + writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp, + &mctl_ctl->dramtmg[4]); + writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke, + &mctl_ctl->dramtmg[5]); + /* Value suggested by ZynqMP manual and used by libdram */ + writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]); + writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs, + &mctl_ctl->dramtmg[8]); + writel(txsr, &mctl_ctl->dramtmg[14]); + + clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30)); + writel(0, &mctl_ctl->dfimisc); + clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660); + + /* + * Set timing registers of the PHY. + * Note: the PHY is clocked 2x from the DRAM frequency. + */ + writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1), + &mctl_phy->dtpr[0]); + writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]); + writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]); + writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8), + &mctl_phy->dtpr[3]); + writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]); + writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]); + writel(0x0505, &mctl_phy->dtpr[6]); + + /* Configure DFI timing */ + writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000, + &mctl_ctl->dfitmg0); + writel(0x040201, &mctl_ctl->dfitmg1); + + /* Configure PHY timing */ + writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]); + writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]); + + /* set refresh timing */ + writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg); +} + +static void mctl_sys_init(struct dram_para *para) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + + /* Put all DRAM-related blocks to reset state */ + clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE | MBUS_RESET); + writel(0, &ccm->dram_gate_reset); + clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN); + clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET); + + udelay(5); + + /* Set PLL5 rate to doubled DRAM clock rate */ + writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN | + CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg); + mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK); + + /* Configure DRAM mod clock */ + writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg); + setbits_le32(&ccm->dram_clk_cfg, DRAM_CLK_UPDATE); + writel(BIT(0) | BIT(RESET_SHIFT), &ccm->dram_gate_reset); + + /* Disable all channels */ + writel(0, &mctl_com->maer0); + writel(0, &mctl_com->maer1); + writel(0, &mctl_com->maer2); + + /* Configure MBUS and enable DRAM mod reset */ + setbits_le32(&ccm->mbus_cfg, MBUS_RESET); + setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE); + setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET); + udelay(5); + + /* Unknown hack from the BSP, which enables access of mctl_ctl regs */ + writel(0x8000, &mctl_ctl->unk_0x00c); +} + +static void mctl_set_addrmap(struct dram_para *para) +{ + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + u8 cols = para->cols; + u8 rows = para->rows; + u8 ranks = para->ranks; + + /* Ranks */ + if (ranks == 2) + mctl_ctl->addrmap[0] = rows + cols - 3; + else + mctl_ctl->addrmap[0] = 0x1F; + + /* Banks, hardcoded to 8 banks now */ + mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16; + + /* Columns */ + mctl_ctl->addrmap[2] = 0; + switch (cols) { + case 8: + mctl_ctl->addrmap[3] = 0x1F1F0000; + mctl_ctl->addrmap[4] = 0x1F1F; + break; + case 9: + mctl_ctl->addrmap[3] = 0x1F000000; + mctl_ctl->addrmap[4] = 0x1F1F; + break; + case 10: + mctl_ctl->addrmap[3] = 0; + mctl_ctl->addrmap[4] = 0x1F1F; + break; + case 11: + mctl_ctl->addrmap[3] = 0; + mctl_ctl->addrmap[4] = 0x1F00; + break; + case 12: + mctl_ctl->addrmap[3] = 0; + mctl_ctl->addrmap[4] = 0; + break; + default: + panic("Unsupported DRAM configuration: column number invalid\n"); + } + + /* Rows */ + mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); + switch (rows) { + case 13: + mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00; + mctl_ctl->addrmap[7] = 0x0F0F; + break; + case 14: + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000; + mctl_ctl->addrmap[7] = 0x0F0F; + break; + case 15: + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000; + mctl_ctl->addrmap[7] = 0x0F0F; + break; + case 16: + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); + mctl_ctl->addrmap[7] = 0x0F0F; + break; + case 17: + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); + mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00; + break; + case 18: + mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24); + mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8); + break; + default: + panic("Unsupported DRAM configuration: row number invalid\n"); + } + + /* Bank groups, DDR4 only */ + mctl_ctl->addrmap[8] = 0x3F3F; +} + +static void mctl_com_init(struct dram_para *para) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + struct sunxi_mctl_phy_reg * const mctl_phy = + (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + u32 reg_val, tmp; + + mctl_set_addrmap(para); + + setbits_le32(&mctl_com->cr, BIT(31)); + /* + * This address is magic; it's in SID memory area, but there's no + * known definition of it. + * On my Pine H64 board it has content 7. + */ + if (readl(0x03006100) == 7) + clrbits_le32(&mctl_com->cr, BIT(27)); + else if (readl(0x03006100) == 3) + setbits_le32(&mctl_com->cr, BIT(27)); + + if (para->clk > 408) + reg_val = 0xf00; + else if (para->clk > 246) + reg_val = 0x1f00; + else + reg_val = 0x3f00; + clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val); + + /* TODO: half DQ, non-LPDDR3 types */ + writel(MSTR_DEVICETYPE_LPDDR3 | MSTR_BUSWIDTH_FULL | + MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks) | + 0x80000000, &mctl_ctl->mstr); + writel(DCR_LPDDR3 | DCR_DDR8BANK | 0x400, &mctl_phy->dcr); + + if (para->ranks == 2) + writel(0x0303, &mctl_ctl->odtmap); + else + writel(0x0201, &mctl_ctl->odtmap); + + /* TODO: non-LPDDR3 types */ + tmp = para->clk * 7 / 2000; + reg_val = 0x0400; + reg_val |= (tmp + 7) << 24; + reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16; + writel(reg_val, &mctl_ctl->odtcfg); + + /* TODO: half DQ */ +} + +static void mctl_bit_delay_set(struct dram_para *para) +{ + struct sunxi_mctl_phy_reg * const mctl_phy = + (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + int i, j; + u32 val; + + for (i = 0; i < 4; i++) { + val = readl(&mctl_phy->dx[i].bdlr0); + for (j = 0; j < 4; j++) + val += para->dx_write_delays[i][j] << (j * 8); + writel(val, &mctl_phy->dx[i].bdlr0); + + val = readl(&mctl_phy->dx[i].bdlr1); + for (j = 0; j < 4; j++) + val += para->dx_write_delays[i][j + 4] << (j * 8); + writel(val, &mctl_phy->dx[i].bdlr1); + + val = readl(&mctl_phy->dx[i].bdlr2); + for (j = 0; j < 4; j++) + val += para->dx_write_delays[i][j + 8] << (j * 8); + writel(val, &mctl_phy->dx[i].bdlr2); + } + clrbits_le32(&mctl_phy->pgcr[0], BIT(26)); + + for (i = 0; i < 4; i++) { + val = readl(&mctl_phy->dx[i].bdlr3); + for (j = 0; j < 4; j++) + val += para->dx_read_delays[i][j] << (j * 8); + writel(val, &mctl_phy->dx[i].bdlr3); + + val = readl(&mctl_phy->dx[i].bdlr4); + for (j = 0; j < 4; j++) + val += para->dx_read_delays[i][j + 4] << (j * 8); + writel(val, &mctl_phy->dx[i].bdlr4); + + val = readl(&mctl_phy->dx[i].bdlr5); + for (j = 0; j < 4; j++) + val += para->dx_read_delays[i][j + 8] << (j * 8); + writel(val, &mctl_phy->dx[i].bdlr5); + + val = readl(&mctl_phy->dx[i].bdlr6); + val += (para->dx_read_delays[i][12] << 8) | + (para->dx_read_delays[i][13] << 16); + writel(val, &mctl_phy->dx[i].bdlr6); + } + setbits_le32(&mctl_phy->pgcr[0], BIT(26)); + udelay(1); + + for (i = 1; i < 14; i++) { + val = readl(&mctl_phy->acbdlr[i]); + val += 0x0a0a0a0a; + writel(val, &mctl_phy->acbdlr[i]); + } +} + +static void mctl_channel_init(struct dram_para *para) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + struct sunxi_mctl_ctl_reg * const mctl_ctl = + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; + struct sunxi_mctl_phy_reg * const mctl_phy = + (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; + int i; + u32 val; + + setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30)); + setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30)); + writel(0x2f05, &mctl_ctl->sched[0]); + setbits_le32(&mctl_ctl->rfshctl3, BIT(0)); + setbits_le32(&mctl_ctl->dfimisc, BIT(0)); + setbits_le32(&mctl_ctl->unk_0x00c, BIT(8)); + clrsetbits_le32(&mctl_phy->pgcr[1], 0x180, 0xc0); + /* TODO: non-LPDDR3 types */ + clrsetbits_le32(&mctl_phy->pgcr[2], GENMASK(17, 0), ns_to_t(7800)); + clrbits_le32(&mctl_phy->pgcr[6], BIT(0)); + clrsetbits_le32(&mctl_phy->dxccr, 0xee0, 0x220); + /* TODO: VT compensation */ + clrsetbits_le32(&mctl_phy->dsgcr, BIT(0), 0x440060); + clrbits_le32(&mctl_phy->vtcr[1], BIT(1)); + + for (i = 0; i < 4; i++) + clrsetbits_le32(&mctl_phy->dx[i].gcr[0], 0xe00, 0x800); + for (i = 0; i < 4; i++) + clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, 0x5555); + for (i = 0; i < 4; i++) + clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, 0x1010); + + udelay(100); + + if (para->ranks == 2) + setbits_le32(&mctl_phy->dtcr[1], 0x30000); + else + clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000); + + clrbits_le32(&mctl_phy->dtcr[1], BIT(1)); + if (para->ranks == 2) { + writel(0x00010001, &mctl_phy->rankidr); + writel(0x20000, &mctl_phy->odtcr); + } else { + writel(0x0, &mctl_phy->rankidr); + writel(0x10000, &mctl_phy->odtcr); + } + + /* TODO: non-LPDDR3 types */ + clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040); + if (para->clk <= 792) { + if (para->clk <= 672) { + if (para->clk <= 600) + val = 0x300; + else + val = 0x400; + } else { + val = 0x500; + } + } else { + val = 0x600; + } + /* FIXME: NOT REVIEWED YET */ + clrsetbits_le32(&mctl_phy->zq[0].zqcr, 0x700, val); + clrsetbits_le32(&mctl_phy->zq[0].zqpr[0], 0xff, + CONFIG_DRAM_ZQ & 0xff); + clrbits_le32(&mctl_phy->zq[0].zqor[0], 0xfffff); + setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ >> 8) & 0xff); + setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xf00) - 0x100); + setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xff00) << 4); + clrbits_le32(&mctl_phy->zq[1].zqpr[0], 0xfffff); + setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ >> 16) & 0xff); + setbits_le32(&mctl_phy->zq[1].zqpr[0], ((CONFIG_DRAM_ZQ >> 8) & 0xf00) - 0x100); + setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ & 0xff0000) >> 4); + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { + for (i = 1; i < 14; i++) + writel(0x06060606, &mctl_phy->acbdlr[i]); + } + + /* TODO: non-LPDDR3 types */ + mctl_phy_pir_init(PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | + PIR_QSGATE | PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | + PIR_WREYE); + + /* TODO: non-LPDDR3 types */ + for (i = 0; i < 4; i++) + writel(0x00000909, &mctl_phy->dx[i].gcr[5]); + + for (i = 0; i < 4; i++) { + if (IS_ENABLED(CONFIG_DRAM_ODT_EN)) + val = 0x0; + else + val = 0xaaaa; + clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, val); + + if (IS_ENABLED(CONFIG_DRAM_ODT_EN)) + val = 0x0; + else + val = 0x2020; + clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, val); + } + + mctl_bit_delay_set(para); + udelay(1); + + setbits_le32(&mctl_phy->pgcr[6], BIT(0)); + clrbits_le32(&mctl_phy->pgcr[6], 0xfff8); + for (i = 0; i < 4; i++) + clrbits_le32(&mctl_phy->dx[i].gcr[3], ~0x3ffff); + udelay(10); + + if (readl(&mctl_phy->pgsr[0]) & 0x400000) + { + /* + * Detect single rank. + * TODO: also detect half DQ. + */ + if ((readl(&mctl_phy->dx[0].rsr[0]) & 0x3) == 2 && + (readl(&mctl_phy->dx[1].rsr[0]) & 0x3) == 2 && + (readl(&mctl_phy->dx[2].rsr[0]) & 0x3) == 2 && + (readl(&mctl_phy->dx[3].rsr[0]) & 0x3) == 2) { + para->ranks = 1; + /* Restart DRAM initialization from scratch. */ + mctl_core_init(para); + return; + } + else { + panic("This DRAM setup is currently not supported.\n"); + } + } + + if (readl(&mctl_phy->pgsr[0]) & 0xff00000) { + /* Oops! There's something wrong! */ + debug("PLL = %x\n", readl(0x3001010)); + debug("DRAM PHY PGSR0 = %x\n", readl(&mctl_phy->pgsr[0])); + for (i = 0; i < 4; i++) + debug("DRAM PHY DX%dRSR0 = %x\n", i, readl(&mctl_phy->dx[i].rsr[0])); + panic("Error while initializing DRAM PHY!\n"); + } + + clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40); + clrbits_le32(&mctl_phy->pgcr[1], 0x40); + clrbits_le32(&mctl_ctl->dfimisc, BIT(0)); + writel(1, &mctl_ctl->swctl); + mctl_await_completion(&mctl_ctl->swstat, 1, 1); + clrbits_le32(&mctl_ctl->rfshctl3, BIT(0)); + + setbits_le32(&mctl_com->unk_0x014, BIT(31)); + writel(0xffffffff, &mctl_com->maer0); + writel(0x7ff, &mctl_com->maer1); + writel(0xffff, &mctl_com->maer2); +} + +static void mctl_auto_detect_dram_size(struct dram_para *para) +{ + /* TODO: non-LPDDR3, half DQ */ + /* + * Detect rank number by the code in mctl_channel_init. Furtherly + * when DQ detection is available it will also be executed there. + */ + mctl_core_init(para); + + /* detect row address bits */ + para->cols = 8; + para->rows = 18; + mctl_core_init(para); + + for (para->rows = 13; para->rows < 18; para->rows++) { + /* 8 banks, 8 bit per byte and 32 bit width */ + if (mctl_mem_matches((1 << (para->rows + para->cols + 5)))) + break; + } + + /* detect column address bits */ + para->cols = 11; + mctl_core_init(para); + + for (para->cols = 8; para->cols < 11; para->cols++) { + /* 8 bits per byte and 32 bit width */ + if (mctl_mem_matches(1 << (para->cols + 2))) + break; + } +} + +unsigned long mctl_calc_size(struct dram_para *para) +{ + /* TODO: non-LPDDR3, half DQ */ + + /* 8 banks, 32-bit (4 byte) data width */ + return (1ULL << (para->cols + para->rows + 3)) * 4 * para->ranks; +} + +#define SUN50I_H6_DX_WRITE_DELAYS \ + {{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4, 0 }, \ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }} +#define SUN50I_H6_DX_READ_DELAYS \ + {{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ + { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ + { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \ + { 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }} + +unsigned long sunxi_dram_init(void) +{ + struct sunxi_mctl_com_reg * const mctl_com = + (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; + struct dram_para para = { + .clk = CONFIG_DRAM_CLK, + .type = SUNXI_DRAM_TYPE_LPDDR3, + .ranks = 2, + .cols = 11, + .rows = 14, + .dx_read_delays = SUN50I_H6_DX_READ_DELAYS, + .dx_write_delays = SUN50I_H6_DX_WRITE_DELAYS, + }; + + unsigned long size; + + /* RES_CAL_CTRL_REG in BSP U-boot*/ + setbits_le32(0x7010310, BIT(8)); + clrbits_le32(0x7010318, 0x3f); + + mctl_auto_detect_dram_size(¶); + + mctl_core_init(¶); + + size = mctl_calc_size(¶); + + clrsetbits_le32(&mctl_com->cr, 0xf0, (size >> (10 + 10 + 4)) & 0xf0); + + mctl_set_master_priority(); + + return size; +};