Merge branch 'master' of git://git.denx.de/u-boot-sunxi

trini: Disable CONFIG_SPL_USE_ARCH_MEMSET on orangepi_2

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2017-04-06 12:28:03 -04:00
commit d53ecad92f
38 changed files with 343 additions and 152 deletions

View File

@ -214,6 +214,10 @@ config ENABLE_ARM_SOC_BOOT0_HOOK
ARM_SOC_BOOT0_HOOK which contains the required assembler
preprocessor code.
config ARM_CORTEX_CPU_IS_UP
bool
default n
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y

View File

@ -1,27 +0,0 @@
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/proc-armv/ptrace.h>
#if defined (CONFIG_ARCH_INTEGRATOR)
void do_irq (struct pt_regs *pt_regs)
{
/* ASSUMED to be a timer interrupt */
/* Just clear it - count handled in */
/* integratorap.c */
*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0x0C) = 0;
}
#endif

View File

@ -1,26 +0,0 @@
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/s3c24x0_cpu.h>
#include <asm/proc-armv/ptrace.h>
void do_irq (struct pt_regs *pt_regs)
{
struct s3c24x0_interrupt *irq = s3c24x0_get_base_interrupt();
u_int32_t intpnd = readl(&irq->INTPND);
}

View File

@ -37,7 +37,7 @@
.align 5
#define ONE_MS (GENERIC_TIMER_CLK / 1000)
#define ONE_MS (COUNTER_FREQUENCY / 1000)
#define RESET_WAIT (30 * ONE_MS)
.globl psci_version

View File

@ -62,7 +62,7 @@ int timer_init(void)
/* Enable System Counter */
writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
freq = GENERIC_TIMER_CLK;
freq = COUNTER_FREQUENCY;
asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
/* Set PL1 Physical Timer Ctrl */

View File

@ -188,11 +188,11 @@ ENTRY(_nonsec_init)
* we do this here instead.
* But first check if we have the generic timer.
*/
#ifdef CONFIG_TIMER_CLK_FREQ
#ifdef COUNTER_FREQUENCY
mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1
and r0, r0, #CPUID_ARM_GENTIMER_MASK @ mask arch timer bits
cmp r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
ldreq r1, =CONFIG_TIMER_CLK_FREQ
ldreq r1, =COUNTER_FREQUENCY
mcreq p15, 0, r1, c14, c0, 0 @ write CNTFRQ
#endif

View File

@ -46,7 +46,7 @@ static u32 __secure cp15_read_cntp_ctl(void)
return val;
}
#define ONE_MS (CONFIG_TIMER_CLK_FREQ / 1000)
#define ONE_MS (COUNTER_FREQUENCY / 1000)
static void __secure __mdelay(u32 ms)
{

View File

@ -302,6 +302,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-nanopi-neo.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb

View File

@ -0,0 +1,147 @@
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-h3.dtsi"
/ {
model = "OrangePi PC 2";
compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5";
cpus {
cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
enable-method = "psci";
};
cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
enable-method = "psci";
};
cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
enable-method = "psci";
};
cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
enable-method = "psci";
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x40000000 0x40000000>;
};
aliases {
serial0 = &uart0;
ethernet0 = &emac;
};
soc {
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
};
&gic {
compatible = "arm,gic-400";
};
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc",
"allwinner,sun5i-a13-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 0>;
cd-inverted;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&usbphy {
status = "okay";
};
&ohci1 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_rgmii_pins>;
phy-mode = "rgmii";
phy = <&phy1>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};

View File

@ -242,7 +242,7 @@ struct sunxi_ccm_reg {
/* ahb_gate0 offsets */
#define AHB_GATE_OFFSET_USB_OHCI1 30
#define AHB_GATE_OFFSET_USB_OHCI0 29
#ifdef CONFIG_MACH_SUN8I_H3
#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
@ -293,7 +293,7 @@ struct sunxi_ccm_reg {
#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
#define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
#ifdef CONFIG_MACH_SUN8I_H3
#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.

View File

@ -15,5 +15,6 @@
#define SOCID_A64 0x1689
#define SOCID_H3 0x1680
#define SOCID_H5 0x1718
#endif /* _SUNXI_CPU_H */

View File

@ -56,7 +56,7 @@
#define SUNXI_USB2_BASE 0x01c1c000
#endif
#ifdef CONFIG_SUNXI_GEN_SUN6I
#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
#define SUNXI_USBPHY_BASE 0x01c19000
#define SUNXI_USB0_BASE 0x01c1a000
#define SUNXI_USB1_BASE 0x01c1b000
@ -94,7 +94,7 @@
#define SUNXI_KEYPAD_BASE 0x01c23000
#define SUNXI_TZPC_BASE 0x01c23400
#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \
#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUNXI_H3_H5) || \
defined(CONFIG_MACH_SUN50I)
/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
#define SUNXI_SIDC_BASE 0x01c14000

View File

@ -24,7 +24,7 @@
#include <asm/arch/dram_sun8i_a33.h>
#elif defined(CONFIG_MACH_SUN8I_A83T)
#include <asm/arch/dram_sun8i_a83t.h>
#elif defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
#elif defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
#include <asm/arch/dram_sun8i_h3.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/dram_sun9i.h>

View File

@ -12,7 +12,7 @@
#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
#define SPL_HEADER_VERSION 1
#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
#ifdef CONFIG_SUNXI_HIGH_SRAM
#define SPL_ADDR 0x10000
#else
#define SPL_ADDR 0x0

View File

@ -48,7 +48,7 @@ obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
obj-$(CONFIG_MACH_SUNXI_H3_H5) += dram_sun8i_h3.o
obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o
obj-$(CONFIG_MACH_SUN50I) += dram_sun8i_h3.o
endif

View File

@ -40,7 +40,7 @@ struct fel_stash {
struct fel_stash fel_stash __attribute__((section(".data")));
#ifdef CONFIG_MACH_SUN50I
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
static struct mm_region sunxi_mem_map[] = {
@ -98,7 +98,7 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUNXI_H3_H5)
sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
@ -180,15 +180,13 @@ void s_init(void)
/* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
#endif
#if defined CONFIG_MACH_SUN6I || \
defined CONFIG_MACH_SUN7I || \
defined CONFIG_MACH_SUN8I || \
defined CONFIG_MACH_SUN9I
#if !defined(CONFIG_ARM_CORTEX_CPU_IS_UP) && !defined(CONFIG_ARM64)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
"orr r0, r0, #1 << 6\n"
"mcr p15, 0, r0, c1, c0, 1\n");
"mcr p15, 0, r0, c1, c0, 1\n"
::: "r0");
#endif
#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3
/* Enable non-secure access to some peripherals */

View File

@ -22,7 +22,7 @@ void clock_init_safe(void)
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
#if !defined(CONFIG_MACH_SUN8I_H3) && !defined(CONFIG_MACH_SUN50I)
#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I)
struct sunxi_prcm_reg * const prcm =
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
@ -51,7 +51,7 @@ void clock_init_safe(void)
void clock_init_sec(void)
{
#ifdef CONFIG_MACH_SUN8I_H3
#ifdef CONFIG_MACH_SUNXI_H3_H5
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
@ -152,7 +152,7 @@ void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
const int max_n = 32;
int k = 1, m = 2;
#ifdef CONFIG_MACH_SUN8I_H3
#ifdef CONFIG_MACH_SUNXI_H3_H5
clrsetbits_le32(&ccm->pll5_tuning_cfg, CCM_PLL5_TUN_LOCK_TIME_MASK |
CCM_PLL5_TUN_INIT_FREQ_MASK,
CCM_PLL5_TUN_LOCK_TIME(2) | CCM_PLL5_TUN_INIT_FREQ(16));

View File

@ -91,6 +91,8 @@ int print_cpuinfo(void)
puts("CPU: Allwinner A80 (SUN9I)\n");
#elif defined CONFIG_MACH_SUN50I
puts("CPU: Allwinner A64 (SUN50I)\n");
#elif defined CONFIG_MACH_SUN50I_H5
puts("CPU: Allwinner H5 (SUN50I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");

View File

@ -177,6 +177,34 @@ static void mctl_set_master_priority_a64(void)
writel(0x81000004, &mctl_com->mdfs_bwlr[2]);
}
static void mctl_set_master_priority_h5(void)
{
struct sunxi_mctl_com_reg * const mctl_com =
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
/* enable bandwidth limit windows and set windows size 1us */
writel(399, &mctl_com->tmr);
writel((1 << 16), &mctl_com->bwcr);
/* set cpu high priority */
writel(0x00000001, &mctl_com->mapr);
/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
* they initialise it */
MBUS_CONF( CPU, true, HIGHEST, 0, 300, 260, 150);
MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200);
MBUS_CONF(UNUSED, true, HIGHEST, 0, 512, 256, 96);
MBUS_CONF( DMA, true, HIGHEST, 0, 256, 128, 32);
MBUS_CONF( VE, true, HIGHEST, 0, 1900, 1500, 1000);
MBUS_CONF( CSI, true, HIGHEST, 0, 150, 120, 100);
MBUS_CONF( NAND, true, HIGH, 0, 256, 128, 64);
MBUS_CONF( SS, true, HIGHEST, 0, 256, 128, 64);
MBUS_CONF( TS, true, HIGHEST, 0, 256, 128, 64);
MBUS_CONF( DI, true, HIGH, 0, 1024, 256, 64);
MBUS_CONF( DE, true, HIGHEST, 3, 3400, 2400, 1024);
MBUS_CONF(DE_CFD, true, HIGHEST, 0, 600, 400, 200);
}
static void mctl_set_master_priority(uint16_t socid)
{
switch (socid) {
@ -186,6 +214,9 @@ static void mctl_set_master_priority(uint16_t socid)
case SOCID_A64:
mctl_set_master_priority_a64();
return;
case SOCID_H5:
mctl_set_master_priority_h5();
return;
}
}
@ -256,7 +287,7 @@ static void mctl_set_timing_params(uint16_t socid, struct dram_para *para)
/* set two rank timing */
clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
(0x66 << 8) | (0x10 << 0));
((socid == SOCID_H5 ? 0x33 : 0x66) << 8) | (0x10 << 0));
/* set PHY interface timing, write latency and read latency configure */
writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
@ -391,7 +422,7 @@ static void mctl_sys_init(uint16_t socid, struct dram_para *para)
CCM_DRAMCLK_CFG_DIV(1) |
CCM_DRAMCLK_CFG_SRC_PLL11 |
CCM_DRAMCLK_CFG_UPD);
} else if (socid == SOCID_H3) {
} else if (socid == SOCID_H3 || socid == SOCID_H5) {
clock_set_pll5(CONFIG_DRAM_CLK * 2 * 1000000, false);
clrsetbits_le32(&ccm->dram_clk_cfg,
CCM_DRAMCLK_CFG_DIV_MASK |
@ -410,7 +441,7 @@ static void mctl_sys_init(uint16_t socid, struct dram_para *para)
setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
udelay(10);
writel(0xc00e, &mctl_ctl->clken);
writel(socid == SOCID_H5 ? 0x8000 : 0xc00e, &mctl_ctl->clken);
udelay(500);
}
@ -434,7 +465,10 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
/* setting VTC, default disable all VT */
clrbits_le32(&mctl_ctl->pgcr[0], (1 << 30) | 0x3f);
clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
if (socid == SOCID_H5)
setbits_le32(&mctl_ctl->pgcr[1], (1 << 24) | (1 << 26));
else
clrsetbits_le32(&mctl_ctl->pgcr[1], 1 << 24, 1 << 26);
/* increase DFI_PHY_UPD clock */
writel(PROTECT_MAGIC, &mctl_com->protect);
@ -444,15 +478,22 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
udelay(100);
/* set dramc odt */
for (i = 0; i < 4; i++)
clrsetbits_le32(&mctl_ctl->dx[i].gcr, (0x3 << 4) |
(0x1 << 1) | (0x3 << 2) | (0x3 << 12) |
(0x3 << 14),
IS_ENABLED(CONFIG_DRAM_ODT_EN) ?
DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF);
for (i = 0; i < 4; i++) {
u32 clearmask = (0x3 << 4) | (0x1 << 1) | (0x3 << 2) |
(0x3 << 12) | (0x3 << 14);
u32 setmask = IS_ENABLED(CONFIG_DRAM_ODT_EN) ?
DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF;
if (socid == SOCID_H5) {
clearmask |= 0x2 << 8;
setmask |= 0x4 << 8;
}
clrsetbits_le32(&mctl_ctl->dx[i].gcr, clearmask, setmask);
}
/* AC PDR should always ON */
setbits_le32(&mctl_ctl->aciocr, 0x1 << 1);
clrsetbits_le32(&mctl_ctl->aciocr, socid == SOCID_H5 ? (0x1 << 11) : 0,
0x1 << 1);
/* set DQS auto gating PD mode */
setbits_le32(&mctl_ctl->pgcr[2], 0x3 << 6);
@ -464,7 +505,7 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
/* dphy & aphy phase select 270 degree */
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
(0x1 << 10) | (0x2 << 8));
} else if (socid == SOCID_A64) {
} else if (socid == SOCID_A64 || socid == SOCID_H5) {
/* dphy & aphy phase select ? */
clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
(0x0 << 10) | (0x3 << 8));
@ -488,11 +529,12 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
mctl_phy_init(PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
} else if (socid == SOCID_A64) {
} else if (socid == SOCID_A64 || socid == SOCID_H5) {
clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
/* no PIR_QSGATE for H5 ???? */
}
/* detect ranks and bus width */
@ -533,7 +575,7 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
/* set PGCR3, CKE polarity */
if (socid == SOCID_H3)
writel(0x00aa0060, &mctl_ctl->pgcr[3]);
else if (socid == SOCID_A64)
else if (socid == SOCID_A64 || socid == SOCID_H5)
writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
/* power down zq calibration module for power save */
@ -604,6 +646,22 @@ static void mctl_auto_detect_dram_size(struct dram_para *para)
3, 4, 0, 3, 4, 1, 4, 0, \
1, 1, 0, 1, 13, 5, 4 }
#define SUN8I_H5_DX_READ_DELAYS \
{{ 14, 15, 17, 17, 17, 17, 17, 18, 17, 3, 3 }, \
{ 21, 21, 12, 22, 21, 21, 21, 21, 21, 3, 3 }, \
{ 16, 19, 19, 17, 22, 22, 21, 22, 19, 3, 3 }, \
{ 21, 21, 22, 22, 20, 21, 19, 19, 19, 3, 3 } }
#define SUN8I_H5_DX_WRITE_DELAYS \
{{ 1, 2, 3, 4, 3, 4, 4, 4, 6, 6, 6 }, \
{ 6, 6, 6, 5, 5, 5, 5, 5, 6, 6, 6 }, \
{ 0, 2, 4, 2, 6, 5, 5, 5, 6, 6, 6 }, \
{ 3, 3, 3, 2, 2, 1, 1, 1, 4, 4, 4 } }
#define SUN8I_H5_AC_DELAYS \
{ 0, 0, 5, 5, 0, 0, 0, 0, \
0, 0, 0, 0, 3, 3, 3, 3, \
3, 3, 3, 3, 3, 3, 3, 3, \
3, 3, 3, 3, 2, 0, 0 }
unsigned long sunxi_dram_init(void)
{
struct sunxi_mctl_com_reg * const mctl_com =
@ -625,6 +683,10 @@ unsigned long sunxi_dram_init(void)
.dx_read_delays = SUN50I_A64_DX_READ_DELAYS,
.dx_write_delays = SUN50I_A64_DX_WRITE_DELAYS,
.ac_delays = SUN50I_A64_AC_DELAYS,
#elif defined(CONFIG_MACH_SUN50I_H5)
.dx_read_delays = SUN8I_H5_DX_READ_DELAYS,
.dx_write_delays = SUN8I_H5_DX_WRITE_DELAYS,
.ac_delays = SUN8I_H5_AC_DELAYS,
#endif
};
/*
@ -636,6 +698,8 @@ unsigned long sunxi_dram_init(void)
uint16_t socid = SOCID_H3;
#elif defined(CONFIG_MACH_SUN50I)
uint16_t socid = SOCID_A64;
#elif defined(CONFIG_MACH_SUN50I_H5)
uint16_t socid = SOCID_H5;
#endif
mctl_sys_init(socid, &para);
@ -652,8 +716,9 @@ unsigned long sunxi_dram_init(void)
if (socid == SOCID_H3)
writel(0x0c000400, &mctl_ctl->odtcfg);
if (socid == SOCID_A64) {
setbits_le32(&mctl_ctl->vtfcr, 2 << 8);
if (socid == SOCID_A64 || socid == SOCID_H5) {
setbits_le32(&mctl_ctl->vtfcr,
(socid == SOCID_H5 ? 3 : 2) << 8);
clrbits_le32(&mctl_ctl->pgcr[2], (1 << 13));
}

View File

@ -146,10 +146,10 @@ __maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
}
}
#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
#if defined CONFIG_MACH_SUN8I_H3
#if defined CONFIG_MACH_SUNXI_H3_H5
if (phy->id == 0)
clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
#endif

View File

@ -27,6 +27,17 @@ config SPL_POWER_SUPPORT
config SPL_SERIAL_SUPPORT
default y
config SUNXI_HIGH_SRAM
bool
default n
---help---
Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
with the first SRAM region being located at address 0.
Some newer SoCs map the boot ROM at address 0 instead and move the
SRAM to 64KB, just behind the mask ROM.
Chips using the latter setup are supposed to select this option to
adjust the addresses accordingly.
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig
config SUNXI_GEN_SUN4I
@ -43,6 +54,11 @@ config SUNXI_GEN_SUN6I
watchdog, etc.
config MACH_SUNXI_H3_H5
bool
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
choice
prompt "Sunxi SoC Variant"
optional
@ -50,12 +66,14 @@ choice
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7
select ARM_CORTEX_CPU_IS_UP
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select CPU_V7
select ARM_CORTEX_CPU_IS_UP
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
@ -111,13 +129,13 @@ config MACH_SUN8I_H3
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select MACH_SUNXI_H3_H5
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
@ -125,14 +143,21 @@ config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
select SUNXI_GEN_SUN6I
select SUNXI_HIGH_SRAM
select SUPPORT_SPL
config MACH_SUN50I_H5
bool "sun50i (Allwinner H5)"
select ARM64
select MACH_SUNXI_H3_H5
select SUNXI_HIGH_SRAM
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T
config RESERVE_ALLWINNER_BOOT0_HEADER
bool "reserve space for Allwinner boot0 header"
@ -320,7 +345,7 @@ config OLD_SUNXI_KERNEL_COMPAT
config MMC0_CD_PIN
string "Card detect pin for mmc0"
default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
default ""
---help---
Set the card detect pin for mmc0, leave empty to not use cd. This
@ -485,7 +510,7 @@ config AXP_GPIO
config VIDEO
bool "Enable graphical uboot console on HDMI, LCD or VGA"
depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I
depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD

View File

@ -242,6 +242,11 @@ M: Icenowy Zheng <icenowy@aosc.xyz>
S: Maintained
F: configs/orangepi_zero_defconfig
ORANGEPI PC 2 BOARD
M: Andre Przywara <andre.przywara@arm.com>
S: Maintained
F: configs/orangepi_pc2_defconfig
R16 EVB PARROT BOARD
M: Quentin Schulz <quentin.schulz@free-electrons.com>
S: Maintained

View File

@ -100,14 +100,14 @@ int board_init(void)
* we avoid the risk of writing to it.
*/
asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r"(freq));
if (freq != CONFIG_TIMER_CLK_FREQ) {
if (freq != COUNTER_FREQUENCY) {
debug("arch timer frequency is %d Hz, should be %d, fixing ...\n",
freq, CONFIG_TIMER_CLK_FREQ);
freq, COUNTER_FREQUENCY);
#ifdef CONFIG_NON_SECURE
printf("arch timer frequency is wrong, but cannot adjust it\n");
#else
asm volatile("mcr p15, 0, %0, c14, c0, 0"
: : "r"(CONFIG_TIMER_CLK_FREQ));
: : "r"(COUNTER_FREQUENCY));
#endif
}
}

View File

@ -1,4 +1,5 @@
CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672

View File

@ -0,0 +1,19 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN50I_H5=y
CONFIG_SPL=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881977
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_SPL_SPI_SUNXI=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y

View File

@ -132,7 +132,7 @@ if SPL
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_H3 || MACH_SUN50I
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I
---help---
Enable support for SPI Flash. This option allows SPL to read from
sunxi SPI Flash. It uses the same method as the boot ROM, so does

View File

@ -185,14 +185,14 @@ static void spi0_deinit(void)
#define SPI_READ_MAX_SIZE 60 /* FIFO size, minus 4 bytes of the header */
static void sunxi_spi0_read_data(u8 *buf, u32 addr, u32 bufsize,
u32 spi_ctl_reg,
u32 spi_ctl_xch_bitmask,
u32 spi_fifo_reg,
u32 spi_tx_reg,
u32 spi_rx_reg,
u32 spi_bc_reg,
u32 spi_tc_reg,
u32 spi_bcc_reg)
ulong spi_ctl_reg,
ulong spi_ctl_xch_bitmask,
ulong spi_fifo_reg,
ulong spi_tx_reg,
ulong spi_rx_reg,
ulong spi_bc_reg,
ulong spi_tc_reg,
ulong spi_bcc_reg)
{
writel(4 + bufsize, spi_bc_reg); /* Burst counter (total bytes) */
writel(4, spi_tc_reg); /* Transfer counter (bytes to send) */

View File

@ -62,7 +62,7 @@
#define AHB_GATE_OFFSET_EPHY 0
#if defined(CONFIG_MACH_SUN8I_H3)
#if defined(CONFIG_MACH_SUNXI_H3_H5)
#define SUN8I_GPD8_GMAC 2
#else
#define SUN8I_GPD8_GMAC 4

View File

@ -12,7 +12,7 @@ choice
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
default AXP818_POWER if MACH_SUN8I_A83T
default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I
config SUNXI_NO_PMIC
bool "board without a pmic"
@ -60,7 +60,7 @@ config AXP818_POWER
config SY8106A_POWER
bool "SY8106A pmic support"
depends on MACH_SUN8I_H3
depends on MACH_SUNXI_H3_H5
---help---
Select this to enable support for the SY8106A pmic found on some
H3 boards.

View File

@ -45,7 +45,7 @@ static int ehci_usb_probe(struct udevice *dev)
* clocks resp. phys.
*/
priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
#endif
priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST;

View File

@ -23,7 +23,7 @@
/* input clock of PLL: 24MHz input clock */
#define CONFIG_SYS_CLK_FREQ 24000000
#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ
#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG

View File

@ -36,11 +36,6 @@
#define CONFIG_CMD_EXT2
#endif
/*
* Generic Timer Definitions
*/
#define GENERIC_TIMER_CLK 12500000
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
@ -243,7 +238,7 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_TIMER_CLK_FREQ 12500000
#define COUNTER_FREQUENCY 12500000
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256

View File

@ -27,11 +27,6 @@
#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
/*
* Generic Timer Definitions
*/
#define GENERIC_TIMER_CLK 12500000
#ifndef __ASSEMBLY__
unsigned long get_board_sys_clk(void);
unsigned long get_board_ddr_clk(void);
@ -500,7 +495,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_TIMER_CLK_FREQ 12500000
#define COUNTER_FREQUENCY 12500000
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256

View File

@ -56,11 +56,6 @@
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#endif
/*
* Generic Timer Definitions
*/
#define GENERIC_TIMER_CLK 12500000
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
@ -370,7 +365,7 @@
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_TIMER_CLK_FREQ 12500000
#define COUNTER_FREQUENCY 12500000
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256

View File

@ -21,7 +21,7 @@
#define CONFIG_MXC_GPT_HCLK
#define CONFIG_SYSCOUNTER_TIMER
#define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */
#define CONFIG_TIMER_CLK_FREQ CONFIG_SC_TIMER_CLK
#define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK
#define CONFIG_SYS_FSL_CLK
#define CONFIG_SYS_BOOTM_LEN 0x1000000

View File

@ -18,7 +18,6 @@
#define CONFIG_SUNXI_USB_PHYS 1
#define COUNTER_FREQUENCY CONFIG_TIMER_CLK_FREQ
#define GICD_BASE 0x1c81000
#define GICC_BASE 0x1c82000

View File

@ -46,7 +46,7 @@
#endif
/* CPU */
#define CONFIG_TIMER_CLK_FREQ 24000000
#define COUNTER_FREQUENCY 24000000
/*
* The DRAM Base differs between some models. We cannot use macros for the
@ -79,7 +79,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */
#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
#ifdef CONFIG_SUNXI_HIGH_SRAM
/*
* The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is
* slightly bigger. Note that it is possible to map the first 32 KiB of the
@ -175,32 +175,24 @@
#define CONFIG_SPL_BOARD_LOAD_IMAGE
#endif
#if defined(CONFIG_MACH_SUN9I)
#ifdef CONFIG_SUNXI_HIGH_SRAM
#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* ? KiB on sun9i */
#elif defined(CONFIG_MACH_SUN50I)
#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun50i */
#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB */
#define LOW_LEVEL_SRAM_STACK 0x00018000
#else
#define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */
#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#endif
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#ifndef CONFIG_ARM64
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
#endif
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
#if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
/* FIXME: 40 KiB instead of 32 KiB ? */
#define LOW_LEVEL_SRAM_STACK 0x00018000
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#else
/* end of 32 KiB in sram */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#endif
/* I2C */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \

View File

@ -6305,7 +6305,6 @@ CONFIG_TI816X_EVM_DDR3
CONFIG_TI816X_USE_EMIF0
CONFIG_TI816X_USE_EMIF1
CONFIG_TI81XX
CONFIG_TIMER_CLK_FREQ
CONFIG_TIMESTAMP
CONFIG_TIZEN
CONFIG_TI_KEYSTONE_SERDES