brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

Merge git://git.denx.de/u-boot-x86

Browse Source
This commit is contained in:
Tom Rini 2017-08-08 17:06:19 -04:00
commit d529124fdc
16 changed files with 380 additions and 87 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

74
arch/x86/include/asm/io.h
View File

@ -1,3 +1,10 @@
/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_IO_H
#define _ASM_IO_H
@ -118,71 +125,6 @@
#define setbits_8(addr, set) setbits(8, addr, set)
#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
/*
* ISA space is 'always mapped' on a typical x86 system, no need to
* explicitly ioremap() it. The fact that the ISA IO space is mapped
* to PAGE_OFFSET is pure coincidence - it does not mean ISA values
* are physical addresses. The following constant pointer can be
* used as the IO-area pointer (it can be iounmapped as well, so the
* analogy with PCI is quite large):
*/
#define isa_readb(a) readb((a))
#define isa_readw(a) readw((a))
#define isa_readl(a) readl((a))
#define isa_writeb(b,a) writeb(b,(a))
#define isa_writew(w,a) writew(w,(a))
#define isa_writel(l,a) writel(l,(a))
#define isa_memset_io(a,b,c) memset_io((a),(b),(c))
#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c))
#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c))
static inline int check_signature(unsigned long io_addr,
const unsigned char *signature, int length)
{
int retval = 0;
do {
if (readb(io_addr) != *signature)
goto out;
io_addr++;
signature++;
length--;
} while (length);
retval = 1;
out:
return retval;
}
/**
* isa_check_signature - find BIOS signatures
* @io_addr: mmio address to check
* @signature: signature block
* @length: length of signature
*
* Perform a signature comparison with the ISA mmio address io_addr.
* Returns 1 on a match.
*
* This function is deprecated. New drivers should use ioremap and
* check_signature.
*/
static inline int isa_check_signature(unsigned long io_addr,
const unsigned char *signature, int length)
{
int retval = 0;
do {
if (isa_readb(io_addr) != *signature)
goto out;
io_addr++;
signature++;
length--;
} while (length);
retval = 1;
out:
return retval;
}
#endif /* __KERNEL__ */
#ifdef SLOW_IO_BY_JUMPING
@ -325,4 +267,4 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
#define __iormb() dmb()
#define __iowmb() dmb()
#endif
#endif /* _ASM_IO_H */

1
arch/x86/lib/acpi_s3.c
View File

@ -8,6 +8,7 @@
#include <asm/acpi_s3.h>
#include <asm/acpi_table.h>
#include <asm/post.h>
#include <linux/linkage.h>
DECLARE_GLOBAL_DATA_PTR;

11
board/congatec/Kconfig
View File

@ -24,6 +24,17 @@ config TARGET_CONGA_QEVAL20_QA3_E3845
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
config TARGET_THEADORABLE_X86_CONGA_QA3_E3845
bool "theadorable-x86 baseboard & conga-QA3/E3845"
help
This is the theadorable-x86 baseboard board equipped with the
conga-QA3/E3845-4G SoM. It contains an Atom E3845 with Ethernet,
micro-SD, USB 2, USB 3, SATA, serial console and HDMI 1.3 video
out. It requires some binary blobs - see README.x86 for details.
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
endchoice
source "board/congatec/conga-qeval20-qa3-e3845/Kconfig"

9
board/congatec/conga-qeval20-qa3-e3845/Kconfig
View File

@ -1,5 +1,3 @@
if TARGET_CONGA_QEVAL20_QA3_E3845
config SYS_BOARD
default "conga-qeval20-qa3-e3845"
@ -10,7 +8,8 @@ config SYS_SOC
default "baytrail"
config SYS_CONFIG_NAME
default "conga-qeval20-qa3-e3845"
default "conga-qeval20-qa3-e3845" if TARGET_CONGA_QEVAL20_QA3_E3845
default "theadorable-x86-conga-qa3-e3845" if TARGET_THEADORABLE_X86_CONGA_QA3_E3845
config SYS_TEXT_BASE
default 0xfff00000 if !EFI_STUB
@ -24,8 +23,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SPI_FLASH_STMICRO
imply SPI_FLASH_SPANSION
imply SPI_FLASH_WINBOND
config PCIE_ECAM_BASE
default 0xe0000000
endif

3
board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
View File

@ -3,6 +3,9 @@ M: Stefan Roese <sr@denx.de>
S: Maintained
F: board/congatec/conga-qeval20-qa3-e3845
F: include/configs/conga-qeval20-qa3-e3845.h
F: include/configs/theadorable-x86-conga-qa3-e3845.h
F: configs/conga-qeval20-qa3-e3845_defconfig
F: configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
F: configs/theadorable-x86-conga-qa3-e3845_defconfig
F: configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
F: arch/x86/dts/conga-qeval20-qa3-e3845.dts

18
board/dfi/Kconfig
View File

@ -8,10 +8,9 @@ if VENDOR_DFI
choice
prompt "Mainboard model"
optional
config TARGET_DFI_BT700
bool "DFI BT700 BayTrail"
config TARGET_Q7X_151_DFI_BT700
bool "DFI BT700 BayTrail on DFI Q7X-151 baseboard"
imply SCSI
help
This is the DFI Q7X-151 baseboard equipped with the
@ -23,6 +22,19 @@ config TARGET_DFI_BT700
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
config TARGET_THEADORABLE_X86_DFI_BT700
bool "DFI BT700 BayTrail on theadorable-x86 baseboard"
imply SCSI
help
This is the theadorable-x86 baseboard equipped with the
DFI BayTrail Bt700 SoM. It contains an Atom E3845 with
Ethernet (in non-PCIe-x4 configuration), micro-SD, USB 2,
USB 3, SATA, serial console and DisplayPort video out.
It requires some binary blobs - see README.x86 for details.
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
endchoice
source "board/dfi/dfi-bt700/Kconfig"

9
board/dfi/dfi-bt700/Kconfig
View File

@ -1,5 +1,3 @@
if TARGET_DFI_BT700
config SYS_BOARD
default "dfi-bt700"
@ -10,7 +8,8 @@ config SYS_SOC
default "baytrail"
config SYS_CONFIG_NAME
default "dfi-bt700"
default "dfi-bt700" if TARGET_Q7X_151_DFI_BT700
default "theadorable-x86-dfi-bt700" if TARGET_THEADORABLE_X86_DFI_BT700
config SYS_TEXT_BASE
default 0xfff00000 if !EFI_STUB
@ -24,8 +23,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SPI_FLASH_STMICRO
imply SPI_FLASH_SPANSION
imply SPI_FLASH_WINBOND
config PCIE_ECAM_BASE
default 0xe0000000
endif

1
board/dfi/dfi-bt700/MAINTAINERS
View File

@ -3,6 +3,7 @@ M: Stefan Roese <sr@denx.de>
S: Maintained
F: board/dfi/dfi-bt700
F: include/configs/dfi-bt700.h
F: include/configs/theadorable-x86-dfi-bt700.h
F: configs/dfi-bt700-q7x-151_defconfig
F: configs/theadorable-x86-dfi-bt700_defconfig
F: arch/x86/dts/dfi-bt700.dtsi

5
configs/conga-qeval20-qa3-e3845_defconfig
View File

@ -2,12 +2,13 @@ CONFIG_X86=y
CONFIG_VENDOR_CONGATEC=y
CONFIG_TARGET_CONGA_QEVAL20_QA3_E3845=y
CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
CONFIG_DEBUG_UART=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffa0000
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_SEABIOS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
@ -46,8 +47,6 @@ CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_WINBOND_W83627=y
CONFIG_E1000=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y

6
configs/dfi-bt700-q7x-151_defconfig
View File

@ -1,13 +1,13 @@
CONFIG_X86=y
CONFIG_VENDOR_DFI=y
CONFIG_DEFAULT_DEVICE_TREE="dfi-bt700-q7x-151"
CONFIG_TARGET_DFI_BT700=y
CONFIG_DEBUG_UART=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffa0000
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_SEABIOS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
@ -44,8 +44,6 @@ CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_NUVOTON_NCT6102D=y
CONFIG_E1000=y
CONFIG_DEBUG_UART_BASE=0x3f8
CONFIG_DEBUG_UART_CLOCK=1843200
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y

55
configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig Normal file
View File

@ -0,0 +1,55 @@
CONFIG_X86=y
CONFIG_VENDOR_CONGATEC=y
CONFIG_TARGET_THEADORABLE_X86_CONGA_QA3_E3845=y
CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
CONFIG_INTERNAL_UART=y
CONFIG_FLASH_DESCRIPTOR_FILE="descriptor-pcie-x4.bin"
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffa0000
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_SEABIOS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ISO_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_WINBOND_W83627=y
CONFIG_E1000=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5

54
configs/theadorable-x86-conga-qa3-e3845_defconfig Normal file
View File

@ -0,0 +1,54 @@
CONFIG_X86=y
CONFIG_VENDOR_CONGATEC=y
CONFIG_TARGET_THEADORABLE_X86_CONGA_QA3_E3845=y
CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
CONFIG_INTERNAL_UART=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffa0000
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_SEABIOS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_INTEL=y
CONFIG_WINBOND_W83627=y
CONFIG_E1000=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_114=y
CONFIG_CONSOLE_SCROLL_LINES=5

3
configs/theadorable-x86-dfi-bt700_defconfig
View File

@ -1,13 +1,14 @@
CONFIG_X86=y
CONFIG_VENDOR_DFI=y
CONFIG_DEFAULT_DEVICE_TREE="theadorable-x86-dfi-bt700"
CONFIG_TARGET_DFI_BT700=y
CONFIG_TARGET_THEADORABLE_X86_DFI_BT700=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffa0000
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_SEABIOS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y

155
include/configs/theadorable-x86-common.h Normal file
View File

@ -0,0 +1,155 @@
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Common options, macros and default environment for all
* theadorable x86 based boards
*/
#ifndef __THEADORABLE_X86_COMMON_H
#define __THEADORABLE_X86_COMMON_H
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_PREBOOT
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0"
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_RTL8152
#define VIDEO_IO_OFFSET 0
#define CONFIG_X86EMU_RAW_IO
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
/* Environment settings */
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#undef CONFIG_ENV_SIZE
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0x006ec000
#define CONFIG_ENV_OFFSET_REDUND \
(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#undef CONFIG_BOOTARGS
#undef CONFIG_BOOTCOMMAND
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"tftpdir=" DEF_ENV_TFTPDIR "\0" \
"eth_init=" DEF_ENV_ETH_INIT "\0" \
"ubuntu_part=" __stringify(DEF_ENV_UBUNTU_PART) "\0" \
"yocto_part=" __stringify(DEF_ENV_YOCTO_PART) "\0" \
"ubuntu_tty=" __stringify(DEF_ENV_UBUNTU_TTY) "\0" \
"yocto_tty=" __stringify(DEF_ENV_YOCTO_TTY) "\0" \
"start_eth=if test -n \"${eth_init}\";" \
"then run eth_init;else sleep 0;fi\0" \
"kernel-ver=4.8.0-54\0" \
"boot=zboot 03000000 0 04000000 ${filesize}\0" \
"mtdparts=mtdparts=intel-spi:4k(descriptor),7084k(me)," \
"8k(env1),8k(env2),64k(mrc),640k(u-boot)," \
"64k(vga),-(fsp)\0" \
"addtty_ubuntu=setenv bootargs ${bootargs} " \
"console=ttyS${ubuntu_tty},${baudrate}\0" \
"addtty_yocto=setenv bootargs ${bootargs} " \
"console=ttyS${yocto_tty},${baudrate}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=setenv bootargs ${bootargs} " \
"intel-spi.writeable=1 vmalloc=300M " \
"pci=realloc=on,hpmemsize=0x12000000\0" \
"bootcmd=if env exists recovery_status;" \
"then run swupdate;" \
"else run yocto_boot;run swupdate;" \
"fi\0" \
"ubuntu_args=setenv bootargs " \
"root=/dev/sda${ubuntu_part} ro\0" \
"ubuntu_args_quiet=setenv bootargs " \
"root=/dev/sda${ubuntu_part} ro quiet\0" \
"ubuntu_load=load scsi 0:${ubuntu_part} 03000000 " \
"/boot/vmlinuz-${kernel-ver}-generic;" \
"load scsi 0:${ubuntu_part} 04000000 " \
"/boot/initrd.img-${kernel-ver}-generic\0" \
"ubuntu_boot=run ubuntu_args_quiet addmtd addmisc " \
"ubuntu_load boot\0" \
"ubuntu_boot_console=run ubuntu_args addtty_ubuntu " \
"addmtd addmisc ubuntu_load boot\0" \
"net_args=setenv bootargs root=/dev/sda${ubuntu_part} ro\0" \
"net_boot=run start_eth net_args addtty_yocto addmtd addmisc;" \
"tftp 03000000 ${tftpdir}/bzImage;" \
"load scsi 0:${ubuntu_part} 04000000 " \
"/boot/initrd.img-${kernel-ver}-generic;" \
"run boot\0" \
"yocto_args=setenv bootargs root=/dev/sda${yocto_part} " \
"ip=dhcp panic=1\0" \
"yocto_args_fast=setenv bootargs root=/dev/sda${yocto_part} " \
"quiet panic=1\0" \
"yocto_boot=run yocto_args addmtd addmisc addtty_yocto;" \
"if run yocto_load;then zboot 03000000;fi\0" \
"yocto_boot_fast=run yocto_args_fast addmtd addmisc " \
"addtty_yocto yocto_load;zboot 03000000\0" \
"yocto_boot_tftp=run yocto_args addmtd addmisc addtty_yocto " \
"start_eth yocto_load_tftp;zboot 03000000\0" \
"yocto_kernel=bzImage\0" \
"yocto_load=load scsi 0:${yocto_part} 03000000 " \
"/boot/${yocto_kernel}\0" \
"yocto_load_tftp=tftp 03000000 dfi/bzImage\0" \
"swupdate=if env exists swupdate_factory;" \
"then run swupdate_usb;run swupdate_run;" \
"else setenv swupdate_part 2;run swupdate_mmc;" \
"run swupdate_run;setenv swupdate_part 1;" \
"run swupdate_mmc;run swupdate_usb;" \
"run swupdate_run;" \
"fi\0" \
"swupdate-initrd=/boot/swupdate-image-theadorable.ext4.gz\0" \
"swupdate-kernel=/boot/bzImage\0" \
"swupdate_args=setenv bootargs root=/dev/ram rw ip=dhcp panic=1\0" \
"swupdate_dev=0\0" \
"swupdate_factory=0\0" \
"swupdate_interface=usb\0" \
"swupdate_kernel=vmlinuz-4.4.0-28-generic\0" \
"swupdate_load=load ${swupdate_interface} ${swupdate_dev}:" \
"${swupdate_part} 03000000 ${swupdate-kernel}" \
" && load ${swupdate_interface} ${swupdate_dev}:" \
"${swupdate_part} 04000000 ${swupdate-initrd}\0" \
"swupdate_mmc=setenv swupdate_interface mmc;" \
"setenv swupdate_dev ${swupdate_mmcdev};" \
"setenv swupdate_part 1;" \
"mmc dev ${swupdate_dev};mmc rescan\0" \
"swupdate_mmcdev=0\0" \
"swupdate_part=1\0" \
"swupdate_run=run swupdate_args addtty_yocto addmtd addmisc;" \
"if run swupdate_load;then run boot;" \
"else echo SWUpdate cannot be started from " \
"${swupdate_interface};" \
"fi\0" \
"swupdate_usb=setenv swupdate_interface usb;" \
"setenv swupdate_dev 0;setenv swupdate_part 1;" \
"usb start\0" \
"logo_tftp=tftp ${loadaddr} ${tftpdir}/logo.bmp;" \
"bmp display ${loadaddr}\0" \
"preboot=scsi scan;load scsi 0:${ubuntu_part} ${loadaddr} " \
"/boot/logo/logo.bmp;bmp display ${loadaddr}\0" \
"rootpath=/tftpboot/theadorable-x86-conga/work/" \
"rootfs-yocto-swupdate-2017-03-29\0" \
"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
"set_bootargs_nfs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},tcp,nfsvers=3\0" \
"net_nfs=run start_eth set_bootargs_nfs addtty_yocto addip " \
"addmtd addmisc;tftp 03000000 ${tftpdir}/bzImage;" \
"zboot 03000000\0" \
"load_uboot=tftp ${loadaddr} ${tftpdir}/u-boot.rom\0" \
"update_uboot=sf probe;" \
"sf update ${loadaddr} 0 800000;saveenv\0" \
"upd_uboot=run start_eth load_uboot update_uboot\0"
#endif /* __THEADORABLE_X86_COMMON_H */

30
include/configs/theadorable-x86-conga-qa3-e3845.h Normal file
View File

@ -0,0 +1,30 @@
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/x86-common.h>
/* Set the board specific parameters */
#define DEF_ENV_TFTPDIR "theadorable-x86-conga"
#define DEF_ENV_ETH_INIT ""
#define DEF_ENV_UBUNTU_PART 2
#define DEF_ENV_UBUNTU_TTY 0 /* Use ttyS0 */
#define DEF_ENV_YOCTO_PART 3
#define DEF_ENV_YOCTO_TTY 0 /* Use ttyS0 */
/*
* Include the theadorable-x86 common options, macros and default
* environment
*/
#include <configs/theadorable-x86-common.h>
#endif /* __CONFIG_H */

33
include/configs/theadorable-x86-dfi-bt700.h Normal file
View File

@ -0,0 +1,33 @@
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/x86-common.h>
/* Use BayTrail internal HS UART which is memory-mapped */
#undef CONFIG_SYS_NS16550_PORT_MAPPED
/* Set the board specific parameters */
#define DEF_ENV_TFTPDIR "theadorable-x86-dfi"
#define DEF_ENV_ETH_INIT "usb reset"
#define DEF_ENV_UBUNTU_PART 1
#define DEF_ENV_UBUNTU_TTY 4 /* Use ttyS4 */
#define DEF_ENV_YOCTO_PART 2
#define DEF_ENV_YOCTO_TTY 1 /* Use ttyS1 */
/*
* Include the theadorable-x86 common options, macros and default
* environment
*/
#include <configs/theadorable-x86-common.h>
#endif /* __CONFIG_H */