mpc8641: Try to detect old .dts files

Since we've changed the memory map of the board, be nice and
add some checking to try to catch out-of-date .dts files.  We do
this by checking the CCSRBAR location in the .dts and comparing
it to the CCSRBAR location in u-boot.  If they don't match, a
warning msg is printed.  This isn't foolproof, but it's simple and
will catch most of the cases where an out-of-date .dts is present,
including all of the cases where a new u-boot is used with an old
standard MPC8641 .dts file as supplied with Linux.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
This commit is contained in:
Becky Bruce 2008-11-07 13:46:19 -06:00 committed by Jon Loeliger
parent 8db0400a27
commit d52082b12c
2 changed files with 30 additions and 0 deletions

View File

@ -254,6 +254,10 @@ extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
void
ft_board_setup(void *blob, bd_t *bd)
{
int off;
u64 *tmp;
u32 *addrcells;
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI1
@ -262,6 +266,29 @@ ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_PCI2
ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
#endif
/*
* Warn if it looks like the device tree doesn't match u-boot.
* This is just an estimation, based on the location of CCSR,
* which is defined by the "reg" property in the soc node.
*/
off = fdt_path_offset(blob, "/soc8641");
addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
if (tmp) {
u64 addr;
if (addrcells && (*addrcells == 2))
addr = *tmp;
else
addr = *(u32 *)tmp;
if (addr != CONFIG_SYS_CCSRBAR_PHYS)
printf("WARNING: The CCSRBAR address in your .dts "
"does not match the address of the CCSR "
"in u-boot. This means your .dts might "
"be old.\n");
}
}
#endif

View File

@ -115,8 +115,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf
#define CONFIG_SYS_CCSRBAR_PHYS (CONFIG_SYS_CCSRBAR_PHYS_LOW \
| ((u64)CONFIG_SYS_CCSRBAR_PHYS_HIGH << 32))
#else
#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW
#endif
#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)