diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts index 883f217efb..f7fe9fa50c 100644 --- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts +++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts @@ -36,18 +36,18 @@ leds { compatible = "gpio-leds"; - pwr-led { + led-0 { label = "bananapi-m64:red:pwr"; gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ default-state = "on"; }; - green { + led-1 { label = "bananapi-m64:green:user"; gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */ }; - blue { + led-2 { label = "bananapi-m64:blue:user"; gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ }; @@ -105,7 +105,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dc1sw>; status = "okay"; @@ -331,10 +331,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts index e58db8a6ca..09b3c7fb82 100644 --- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts +++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts @@ -35,7 +35,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "nanopi-a64:blue:status"; gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ }; diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts index fde9c7a99b..70e31743f0 100644 --- a/arch/arm/dts/sun50i-a64-orangepi-win.dts +++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts @@ -120,7 +120,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_gmac_3v3>; status = "okay"; @@ -330,10 +330,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm/dts/sun50i-a64-pine64-lts.dts b/arch/arm/dts/sun50i-a64-pine64-lts.dts index 302e24be0a..596a259074 100644 --- a/arch/arm/dts/sun50i-a64-pine64-lts.dts +++ b/arch/arm/dts/sun50i-a64-pine64-lts.dts @@ -1,10 +1,25 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (c) 2018 ARM Ltd. +#include #include "sun50i-a64-sopine-baseboard.dts" / { model = "Pine64 LTS"; compatible = "pine64,pine64-lts", "allwinner,sun50i-r18", "allwinner,sun50i-a64"; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; + }; +}; + +&mmc0 { + broken-cd; /* card detect is broken on *some* boards */ }; diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts index b26181cf90..b54099b654 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus.dts +++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts @@ -13,7 +13,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; phy-handle = <&ext_rgmii_phy>; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts index 2165f238af..329cf27656 100644 --- a/arch/arm/dts/sun50i-a64-pine64.dts +++ b/arch/arm/dts/sun50i-a64-pine64.dts @@ -261,11 +261,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts index 64b1c54f87..7ae16541d1 100644 --- a/arch/arm/dts/sun50i-a64-pinebook.dts +++ b/arch/arm/dts/sun50i-a64-pinebook.dts @@ -126,8 +126,6 @@ }; &ehci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -169,6 +167,7 @@ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_eldo1>; + max-frequency = <200000000>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -177,8 +176,6 @@ }; &ohci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -374,15 +371,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts index 0c42272106..fb65319a3b 100644 --- a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts +++ b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts @@ -7,5 +7,10 @@ / { model = "Pine64 PinePhone Developer Batch (1.0)"; - compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64"; +}; + +&sgm3140 { + enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ + flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ }; diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts index 3e99a87e9c..5e59d37521 100644 --- a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts @@ -7,7 +7,7 @@ / { model = "Pine64 PinePhone Braveheart (1.1)"; - compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64"; }; &backlight { @@ -28,3 +28,8 @@ num-interpolated-steps = <50>; default-brightness-level = <400>; }; + +&sgm3140 { + enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ +}; diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.2.dts b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts index a9f5b670c9..4e7e237cb4 100644 --- a/arch/arm/dts/sun50i-a64-pinephone-1.2.dts +++ b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts @@ -7,7 +7,12 @@ / { model = "Pine64 PinePhone (1.2)"; - compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; + compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64"; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &backlight { @@ -38,3 +43,12 @@ interrupt-parent = <&pio>; interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ }; + +&mmc1 { + mmc-pwrseq = <&wifi_pwrseq>; +}; + +&sgm3140 { + enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ + flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */ +}; diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi index 25150aba74..9f69d489a8 100644 --- a/arch/arm/dts/sun50i-a64-pinephone.dtsi +++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &rtl8723cs; serial0 = &uart0; }; @@ -20,6 +21,7 @@ compatible = "pwm-backlight"; pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + power-supply = <®_ps>; /* Backlight configuration differs per PinePhone revision. */ }; @@ -30,25 +32,51 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { function = LED_FUNCTION_INDICATOR; color = ; gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */ }; - green { + led-1 { function = LED_FUNCTION_INDICATOR; color = ; gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */ }; - red { + led-2 { function = LED_FUNCTION_INDICATOR; color = ; gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */ }; }; + reg_ps: ps-regulator { + compatible = "regulator-fixed"; + regulator-name = "ps"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + reg_vbat_wifi: vbat-wifi { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vbat-wifi"; + }; + + sgm3140: led-controller { + compatible = "sgmicro,sgm3140"; + vin-supply = <®_dcdc1>; + + sgm3140_flash: led { + function = LED_FUNCTION_FLASH; + color = ; + flash-max-timeout-us = <250000>; + }; + }; + speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ @@ -142,15 +170,23 @@ status = "okay"; /* Magnetometer */ - lis3mdl: lis3mdl@1e { + lis3mdl: magnetometer@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; vddio-supply = <®_dldo1>; }; + /* Light/proximity sensor */ + light-sensor@48 { + compatible = "sensortek,stk3311"; + reg = <0x48>; + interrupt-parent = <&pio>; + interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */ + }; + /* Accelerometer/gyroscope */ - mpu6050@68 { + accelerometer@68 { compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&pio>; @@ -167,6 +203,7 @@ &lradc { vref-supply = <®_aldo3>; + wakeup-source; status = "okay"; button-200 { @@ -195,6 +232,20 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vbat_wifi>; + vqmmc-supply = <®_dldo4>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; @@ -251,10 +302,6 @@ #include "axp803.dtsi" -&ac_power_supply { - status = "okay"; -}; - &battery_power_supply { status = "okay"; }; @@ -274,8 +321,8 @@ ®_aldo3 { regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-name = "vcc-pll-avcc"; }; @@ -392,10 +439,10 @@ "Internal Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone", "MBIAS", "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", @@ -408,6 +455,19 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723cs-bt"; + device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */ + enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + }; +}; + /* Connected to the modem (hardware flow control can't be used) */ &uart3 { pinctrl-names = "default"; diff --git a/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts b/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts new file mode 100644 index 0000000000..6265360ce6 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pinetab-early-adopter.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Icenowy Zheng + * + */ + +/dts-v1/; + +#include "sun50i-a64-pinetab.dts" + +/ { + model = "PineTab, Early Adopter's version"; + compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64"; +}; + +&dsi { + /delete-node/ panel@0; + + panel@0 { + compatible = "feixin,k101-im2byl02", "ilitek,ili9881c"; + reg = <0>; + power-supply = <®_dc1sw>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + backlight = <&backlight>; + }; +}; diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts index dc4ab6b434..422a8507f6 100644 --- a/arch/arm/dts/sun50i-a64-pinetab.dts +++ b/arch/arm/dts/sun50i-a64-pinetab.dts @@ -14,7 +14,7 @@ #include / { - model = "PineTab"; + model = "PineTab, Development Sample"; compatible = "pine64,pinetab", "allwinner,sun50i-a64"; aliases { @@ -122,9 +122,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - csi_ep: endpoint { remote-endpoint = <&ov5640_ep>; bus-width = <8>; @@ -421,15 +418,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts index 2f6ea9f3f6..e22b94c836 100644 --- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts @@ -79,7 +79,7 @@ &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dc1sw>; status = "okay"; @@ -111,6 +111,7 @@ bus-width = <8>; non-removable; cap-mmc-hw-reset; + mmc-hs200-1_8v; status = "okay"; }; @@ -159,11 +160,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi index c48692b06e..df62044ff7 100644 --- a/arch/arm/dts/sun50i-a64-sopine.dtsi +++ b/arch/arm/dts/sun50i-a64-sopine.dtsi @@ -32,10 +32,9 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - non-removable; disable-wp; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */ status = "okay"; }; diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts index f5df5f705b..f0a16f355e 100644 --- a/arch/arm/dts/sun50i-a64-teres-i.dts +++ b/arch/arm/dts/sun50i-a64-teres-i.dts @@ -52,12 +52,12 @@ leds { compatible = "gpio-leds"; - capslock { + led-0 { label = "teres-i:green:capslock"; gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ }; - numlock { + led-1 { label = "teres-i:green:numlock"; gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ }; @@ -340,10 +340,10 @@ "Microphone", "Internal Microphone", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index 8dfbcd1440..57786fc120 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -51,7 +51,7 @@ reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -62,7 +62,7 @@ reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -73,7 +73,7 @@ reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -84,7 +84,7 @@ reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -139,10 +139,10 @@ simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC"; + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC"; status = "disabled"; cpudai: simple-audio-card,cpu { @@ -157,6 +157,7 @@ timer { compatible = "arm,armv8-timer"; allwinner,erratum-unknown1; + arm,no-tick-in-suspend; interrupts = , ; reset-names = "ahb"; interrupts = ; - max-frequency = <200000000>; + max-frequency = <150000000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -592,6 +593,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -602,6 +605,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -845,6 +850,20 @@ status = "disabled"; }; + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dma-names = "rx", "tx"; + dmas = <&dma 27>, <&dma 27>; + status = "disabled"; + }; + dai: dai@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-codec-i2s"; @@ -860,7 +879,8 @@ codec: codec@1c22e00 { #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-a33-codec"; + compatible = "allwinner,sun50i-a64-codec", + "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x600>; interrupts = ; clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts index c488aaacbd..a6a1087a0c 100644 --- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -129,7 +129,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; @@ -164,6 +164,10 @@ #include "axp22x.dtsi" +&ir0 { + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; @@ -201,10 +205,15 @@ &pio { pinctrl-names = "default"; pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; }; ®_aldo2 { - regulator-always-on; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-name = "vcc-pa"; @@ -218,16 +227,16 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-gmac-phy"; }; ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi index 06b685869f..d5ad3b9efd 100644 --- a/arch/arm/dts/sun8i-r40.dtsi +++ b/arch/arm/dts/sun8i-r40.dtsi @@ -44,8 +44,10 @@ #include #include #include +#include #include #include +#include / { #address-cells = <1>; @@ -78,25 +80,25 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; @@ -109,6 +111,22 @@ status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal: gpu-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -118,11 +136,11 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-r40-de2-clk", "allwinner,sun8i-h3-de2-clk"; - reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + reg = <0x01000000 0x10000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -172,6 +190,48 @@ }; }; + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-r40-deinterlace", + "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + /* + * NOTE: Contrary to what datasheet claims, + * DRAM deinterlace gate doesn't exist and + * it's shared with CSI1. + */ + <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = ; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-r40-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-r40-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -180,6 +240,69 @@ interrupts = ; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-r40-dma", + "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <16>; + dma-requests = <31>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + + spi0: spi@1c05000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + csi0: csi@1c09000 { + compatible = "allwinner,sun8i-r40-csi0", + "allwinner,sun7i-a20-csi0"; + reg = <0x01c09000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; + resets = <&ccu RST_BUS_CSI0>; + interconnects = <&mbus 5>; + interconnect-names = "dma-mem"; + status = "disabled"; + }; + + video-codec@1c0e000 { + compatible = "allwinner,sun8i-r40-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = ; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; @@ -266,6 +389,38 @@ #phy-cells = <1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-r40-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + + spi2: spi@1c17000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c17000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + reset-names = "ahci"; + status = "disabled"; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; @@ -312,6 +467,19 @@ status = "disabled"; }; + spi3: spi@1c1f000 { + compatible = "allwinner,sun8i-r40-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c1f000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; @@ -322,8 +490,7 @@ }; rtc: rtc@1c20400 { - compatible = "allwinner,sun8i-r40-rtc", - "allwinner,sun8i-h3-rtc"; + compatible = "allwinner,sun8i-r40-rtc"; reg = <0x01c20400 0x400>; interrupts = ; clock-output-names = "osc32k", "osc32k-out"; @@ -347,6 +514,20 @@ function = "clk_out_a"; }; + /omit-if-no-ref/ + csi0_8bits_pins: csi0-8bits-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi0_mclk_pin: csi0-mclk-pin { + pins = "PE1"; + function = "csi0"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -365,6 +546,36 @@ function = "i2c0"; }; + i2c1_pins: i2c1-pins { + pins = "PB18", "PB19"; + function = "i2c1"; + }; + + i2c2_pins: i2c2-pins { + pins = "PB20", "PB21"; + function = "i2c2"; + }; + + i2c3_pins: i2c3-pins { + pins = "PI0", "PI1"; + function = "i2c3"; + }; + + i2c4_pins: i2c4-pins { + pins = "PI2", "PI3"; + function = "i2c4"; + }; + + ir0_pins: ir0-pins { + pins = "PB4"; + function = "ir0"; + }; + + ir1_pins: ir1-pins { + pins = "PB23"; + function = "ir1"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -390,6 +601,36 @@ bias-pull-up; }; + /omit-if-no-ref/ + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi0_cs0_pc_pin: spi0-cs0-pc-pin { + pins = "PC23"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pi_pins: spi1-pi-pins { + pins = "PI17", "PI18", "PI19"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs0_pi_pin: spi1-cs0-pi-pin { + pins = "PI16"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs1_pi_pin: spi1-cs1-pi-pin { + pins = "PI15"; + function = "spi1"; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; @@ -409,6 +650,45 @@ wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = ; + clocks = <&osc24M>; + }; + + ir0: ir@1c21800 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21800 0x400>; + pinctrl-0 = <&ir0_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>; + clock-names = "apb", "ir"; + interrupts = ; + resets = <&ccu RST_BUS_IR0>; + status = "disabled"; + }; + + ir1: ir@1c21c00 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21c00 0x400>; + pinctrl-0 = <&ir1_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>; + clock-names = "apb", "ir"; + interrupts = ; + resets = <&ccu RST_BUS_IR1>; + status = "disabled"; + }; + + ths: thermal-sensor@1c24c00 { + compatible = "allwinner,sun8i-r40-ths"; + reg = <0x01c24c00 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = ; + resets = <&ccu RST_BUS_THS>; + /* TODO: add nvmem-cells for calibration */ + #thermal-sensor-cells = <1>; }; uart0: serial@1c28000 { @@ -518,6 +798,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -529,6 +811,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -540,6 +824,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -551,22 +837,33 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C4>; resets = <&ccu RST_BUS_I2C4>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - ahci: sata@1c18000 { - compatible = "allwinner,sun8i-r40-ahci"; - reg = <0x01c18000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; - resets = <&ccu RST_BUS_SATA>; - resets-name = "ahci"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-r40-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; }; gmac: ethernet@1c50000 { @@ -588,6 +885,16 @@ }; }; + mbus: dram-controller@1c62000 { + compatible = "allwinner,sun8i-r40-mbus"; + reg = <0x01c62000 0x1000>; + clocks = <&ccu 155>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x40000000 0x80000000>; + #interconnect-cells = <1>; + }; + tcon_top: tcon-top@1c70000 { compatible = "allwinner,sun8i-r40-tcon-top"; reg = <0x01c70000 0x1000>; @@ -614,12 +921,9 @@ #size-cells = <0>; tcon_top_mixer0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon_top_mixer0_in_mixer0: endpoint@0 { - reg = <0>; + tcon_top_mixer0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon_top>; }; }; @@ -713,7 +1017,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c73000 0x1000>; interrupts = ; - clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV0>; reset-names = "lcd"; @@ -756,7 +1060,7 @@ compatible = "allwinner,sun8i-r40-tcon-tv"; reg = <0x01c74000 0x1000>; interrupts = ; - clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>; clock-names = "ahb", "tcon-ch1"; resets = <&ccu RST_BUS_TCON_TV1>; reset-names = "lcd"; @@ -798,7 +1102,7 @@ gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -818,7 +1122,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled"; ports { @@ -843,7 +1147,7 @@ compatible = "allwinner,sun8i-r40-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, - <&ccu 7>, <&ccu 16>; + <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>; clock-names = "bus", "mod", "pll-0", "pll-1"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -851,6 +1155,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts index 15c22b06fc..47954551f5 100644 --- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts @@ -120,7 +120,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_dc1sw>; status = "okay"; }; @@ -198,16 +198,16 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-gmac-phy"; }; ®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; }; ®_dcdc2 { diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index a6cdda81a7..5a1b38bf80 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -554,7 +554,7 @@ static int parse_phy_pins(struct udevice *dev) * The GPIO pinmux value is an integration choice, so depends on the * SoC, not the EMAC variant. */ - if (IS_ENABLED(CONFIG_MACH_SUN8I_H3)) + if (IS_ENABLED(CONFIG_MACH_SUNXI_H3_H5)) iomux = SUN8I_IOMUX_H3; else if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) iomux = SUN8I_IOMUX_R40; @@ -562,8 +562,12 @@ static int parse_phy_pins(struct udevice *dev) iomux = SUN8I_IOMUX_H6; else if (IS_ENABLED(CONFIG_MACH_SUN50I_H616)) iomux = SUN8I_IOMUX_H616; - else + else if (IS_ENABLED(CONFIG_MACH_SUN8I_A83T)) iomux = SUN8I_IOMUX; + else if (IS_ENABLED(CONFIG_MACH_SUN50I)) + iomux = SUN8I_IOMUX; + else + BUILD_BUG_ON_MSG(1, "missing pinmux value for Ethernet pins"); for (i = 0; ; i++) { int pin; diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h index 4fa5f69fc2..d7337b55a4 100644 --- a/include/dt-bindings/clock/sun8i-r40-ccu.h +++ b/include/dt-bindings/clock/sun8i-r40-ccu.h @@ -43,6 +43,10 @@ #ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_ #define _DT_BINDINGS_CLK_SUN8I_R40_H_ +#define CLK_PLL_VIDEO0 7 + +#define CLK_PLL_VIDEO1 16 + #define CLK_CPU 24 #define CLK_BUS_MIPI_DSI 29 @@ -172,7 +176,7 @@ #define CLK_AVS 152 #define CLK_HDMI 153 #define CLK_HDMI_SLOW 154 - +#define CLK_MBUS 155 #define CLK_DSI_DPHY 156 #define CLK_TVE0 157 #define CLK_TVE1 158 diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h index 1ea1b702fe..35b6f69b7d 100644 --- a/include/dt-bindings/interrupt-controller/arm-gic.h +++ b/include/dt-bindings/interrupt-controller/arm-gic.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ /* * This header provides constants for the ARM GIC. */ @@ -7,14 +8,14 @@ #include -/* interrupt specific cell 0 */ +/* interrupt specifier cell 0 */ #define GIC_SPI 0 #define GIC_PPI 1 /* * Interrupt specifier cell 2. - * The flaggs in irq.h are valid, plus those below. + * The flags in irq.h are valid, plus those below. */ #define GIC_CPU_MASK_RAW(x) ((x) << 8) #define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1) diff --git a/include/dt-bindings/thermal/thermal.h b/include/dt-bindings/thermal/thermal.h index b5e6b0069a..bc7babb1a6 100644 --- a/include/dt-bindings/thermal/thermal.h +++ b/include/dt-bindings/thermal/thermal.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * This header provides constants for most thermal bindings. * * Copyright (C) 2013 Texas Instruments * Eduardo Valentin - * - * GPLv2 only */ #ifndef _DT_BINDINGS_THERMAL_THERMAL_H