Convert CONFIG_VIDEO_CT69000 to Kconfig

This converts the following to Kconfig:
   CONFIG_VIDEO_CT69000

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Simon Glass 2016-10-17 20:12:43 -06:00 committed by Tom Rini
parent c6745195be
commit cfa307f839
8 changed files with 30 additions and 26 deletions

23
README
View File

@ -1619,35 +1619,12 @@ CBFS (Coreboot Filesystem) support
instead.
- Video support:
CONFIG_VIDEO_CT69000
Enable Chips & Technologies 69000 Video chip
CONFIG_VIDEO_SMI_LYNXEM
Enable Silicon Motion SMI 712/710/810 Video chip. The
video output is selected via environment 'videoout'
(1 = LCD and 2 = CRT). If videoout is undefined, CRT is
assumed.
For the CT69000 and SMI_LYNXEM drivers, videomode is
selected via environment 'videomode'. Two different ways
are possible:
- "videomode=num" 'num' is a standard LiLo mode numbers.
Following standard modes are supported (* is default):
Colors 640x480 800x600 1024x768 1152x864 1280x1024
-------------+---------------------------------------------
8 bits | 0x301* 0x303 0x305 0x161 0x307
15 bits | 0x310 0x313 0x316 0x162 0x319
16 bits | 0x311 0x314 0x317 0x163 0x31A
24 bits | 0x312 0x315 0x318 ? 0x31B
-------------+---------------------------------------------
(i.e. setenv videomode 317; saveenv; reset;)
- "videomode=bootargs" all the video parameters are parsed
from the bootargs. (See drivers/video/videomodes.c)
CONFIG_VIDEO_SED13806
Enable Epson SED13806 driver. This driver supports 8bpp
and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP

View File

@ -16,3 +16,4 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_FAT=y
CONFIG_SYS_NS16550=y
CONFIG_VIDEO_CT69000=y

View File

@ -19,3 +19,4 @@ CONFIG_CMD_FAT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_CT69000=y

View File

@ -19,3 +19,4 @@ CONFIG_CMD_FAT=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_CT69000=y

View File

@ -493,6 +493,33 @@ config CFB_CONSOLE_ANSI
erase functions and limited graphics rendition control). Normal
output from U-Boot will pass through this filter.
config VIDEO_CT69000
bool "Enable Chips & Technologies 69000 video driver"
depends on VIDEO
help
This enables a frame buffer driver for the Chips & Technologies
ct69000, a fairly old graphics device (circa 2000) which is used
on some hardware. It operates over the ISA bus, and supports
some acceleration features.
For the CT69000 and SMI_LYNXEM drivers, videomode is
selected via environment 'videomode'. Two different ways
are possible:
- "videomode=num" 'num' is a standard LiLo mode numbers.
Following standard modes are supported (* is default):
Colors 640x480 800x600 1024x768 1152x864 1280x1024
-------------+---------------------------------------------
8 bits | 0x301* 0x303 0x305 0x161 0x307
15 bits | 0x310 0x313 0x316 0x162 0x319
16 bits | 0x311 0x314 0x317 0x163 0x31A
24 bits | 0x312 0x315 0x318 ? 0x31B
-------------+---------------------------------------------
(i.e. setenv videomode 317; saveenv; reset;)
- "videomode=bootargs" all the video parameters are parsed
from the bootargs. (See drivers/video/videomodes.c)
config LCD
bool "Enable legacy LCD support"
help

View File

@ -339,7 +339,6 @@
/************************************************************
* Video support
************************************************************/
#define CONFIG_VIDEO_CT69000
#define CONFIG_VIDEO_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VGA_AS_SINGLE_DEVICE

View File

@ -299,7 +299,6 @@
/************************************************************
* Video support
************************************************************/
#define CONFIG_VIDEO_CT69000
#define CONFIG_VIDEO_LOGO
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VGA_AS_SINGLE_DEVICE

View File

@ -8260,7 +8260,6 @@ CONFIG_VIDEO_BMP_GZIP
CONFIG_VIDEO_BMP_LOGO
CONFIG_VIDEO_BMP_RLE8
CONFIG_VIDEO_CORALP
CONFIG_VIDEO_CT69000
CONFIG_VIDEO_DA8XX
CONFIG_VIDEO_DT_SIMPLEFB
CONFIG_VIDEO_FONT_4X6