rockchip: clk: rk3368: add support for configuring the SPI clocks

As SPI support may be useful in the boot-flow, this adds support for
configuring the SPI controller's clocks in the RK3368 clock driver.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Philipp Tomsich 2017-07-25 16:48:16 +02:00
parent 4e4c40df30
commit cf8aceb1c9

View File

@ -282,32 +282,6 @@ static ulong rk3368_mmc_set_clk(struct clk *clk, ulong rate)
}
#endif
static ulong rk3368_clk_get_rate(struct clk *clk)
{
struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
ulong rate = 0;
debug("%s: id %ld\n", __func__, clk->id);
switch (clk->id) {
case PLL_CPLL:
rate = rkclk_pll_get_rate(priv->cru, CPLL);
break;
case PLL_GPLL:
rate = rkclk_pll_get_rate(priv->cru, GPLL);
break;
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
case HCLK_SDMMC:
case HCLK_EMMC:
rate = rk3368_mmc_get_clk(priv->cru, clk->id);
break;
#endif
default:
return -ENOENT;
}
return rate;
}
#if IS_ENABLED(CONFIG_TPL_BUILD)
static ulong rk3368_ddr_set_clk(struct rk3368_cru *cru, ulong set_rate)
{
@ -351,6 +325,110 @@ static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru,
}
#endif
/*
* RK3368 SPI clocks have a common divider-width (7 bits) and a single bit
* to select either CPLL or GPLL as the clock-parent. The location within
* the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable.
*/
struct spi_clkreg {
uint8_t reg; /* CLKSEL_CON[reg] register in CRU */
uint8_t div_shift;
uint8_t sel_shift;
};
/*
* The entries are numbered relative to their offset from SCLK_SPI0.
*/
static const struct spi_clkreg spi_clkregs[] = {
[0] = { .reg = 45, .div_shift = 0, .sel_shift = 7, },
[1] = { .reg = 45, .div_shift = 8, .sel_shift = 15, },
[2] = { .reg = 46, .div_shift = 8, .sel_shift = 15, },
};
static inline u32 extract_bits(u32 val, unsigned width, unsigned shift)
{
return (val >> shift) & ((1 << width) - 1);
}
static ulong rk3368_spi_get_clk(struct rk3368_cru *cru, ulong clk_id)
{
const struct spi_clkreg *spiclk = NULL;
u32 div, val;
switch (clk_id) {
case SCLK_SPI0 ... SCLK_SPI2:
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
break;
default:
error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
val = readl(&cru->clksel_con[spiclk->reg]);
div = extract_bits(val, 7, spiclk->div_shift);
debug("%s: div 0x%x\n", __func__, div);
return DIV_TO_RATE(GPLL_HZ, div);
}
static ulong rk3368_spi_set_clk(struct rk3368_cru *cru, ulong clk_id, uint hz)
{
const struct spi_clkreg *spiclk = NULL;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz);
assert(src_clk_div < 127);
switch (clk_id) {
case SCLK_SPI0 ... SCLK_SPI2:
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
break;
default:
error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
rk_clrsetreg(&cru->clksel_con[spiclk->reg],
((0x7f << spiclk->div_shift) |
(0x1 << spiclk->sel_shift)),
((src_clk_div << spiclk->div_shift) |
(1 << spiclk->sel_shift)));
return rk3368_spi_get_clk(cru, clk_id);
}
static ulong rk3368_clk_get_rate(struct clk *clk)
{
struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
ulong rate = 0;
debug("%s: id %ld\n", __func__, clk->id);
switch (clk->id) {
case PLL_CPLL:
rate = rkclk_pll_get_rate(priv->cru, CPLL);
break;
case PLL_GPLL:
rate = rkclk_pll_get_rate(priv->cru, GPLL);
break;
case SCLK_SPI0 ... SCLK_SPI2:
rate = rk3368_spi_get_clk(priv->cru, clk->id);
break;
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
case HCLK_SDMMC:
case HCLK_EMMC:
rate = rk3368_mmc_get_clk(priv->cru, clk->id);
break;
#endif
default:
return -ENOENT;
}
return rate;
}
static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
{
__maybe_unused struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
@ -358,6 +436,9 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
debug("%s id:%ld rate:%ld\n", __func__, clk->id, rate);
switch (clk->id) {
case SCLK_SPI0 ... SCLK_SPI2:
ret = rk3368_spi_set_clk(priv->cru, clk->id, rate);
break;
#if IS_ENABLED(CONFIG_TPL_BUILD)
case CLK_DDR:
ret = rk3368_ddr_set_clk(priv->cru, rate);