dm: serial: Replace setparity by setconfig

Replace setparity by more generic setconfig ops
to allow uart parity, bits word length and stop bits
number change.

Adds SERIAL_GET_PARITY/BITS/STOP macros.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Patrice Chotard 2018-08-03 15:07:38 +02:00 committed by Tom Rini
parent 555e378ca7
commit cbf538831d
2 changed files with 63 additions and 0 deletions

View File

@ -290,6 +290,20 @@ void serial_setbrg(void)
ops->setbrg(gd->cur_serial_dev, gd->baudrate);
}
int serial_setconfig(uint config)
{
struct dm_serial_ops *ops;
if (!gd->cur_serial_dev)
return 0;
ops = serial_get_ops(gd->cur_serial_dev);
if (ops->setconfig)
return ops->setconfig(gd->cur_serial_dev, config);
return 0;
}
void serial_stdio_init(void)
{
}
@ -401,6 +415,8 @@ static int serial_post_probe(struct udevice *dev)
ops->pending += gd->reloc_off;
if (ops->clear)
ops->clear += gd->reloc_off;
if (ops->setconfig)
ops->setconfig += gd->reloc_off;
#if CONFIG_POST & CONFIG_SYS_POST_UART
if (ops->loop)
ops->loop += gd->reloc_off

View File

@ -73,6 +73,39 @@ enum serial_par {
SERIAL_PAR_EVEN
};
#define SERIAL_PAR_SHIFT 0
#define SERIAL_PAR_MASK (0x03 << SERIAL_PAR_SHIFT)
#define SERIAL_GET_PARITY(config) \
((config & SERIAL_PAR_MASK) >> SERIAL_PAR_SHIFT)
enum serial_bits {
SERIAL_5_BITS,
SERIAL_6_BITS,
SERIAL_7_BITS,
SERIAL_8_BITS
};
#define SERIAL_BITS_SHIFT 2
#define SERIAL_BITS_MASK (0x3 << SERIAL_BITS_SHIFT)
#define SERIAL_GET_BITS(config) \
((config & SERIAL_BITS_MASK) >> SERIAL_BITS_SHIFT)
enum serial_stop {
SERIAL_HALF_STOP, /* 0.5 stop bit */
SERIAL_ONE_STOP, /* 1 stop bit */
SERIAL_ONE_HALF_STOP, /* 1.5 stop bit */
SERIAL_TWO_STOP /* 2 stop bit */
};
#define SERIAL_STOP_SHIFT 4
#define SERIAL_STOP_MASK (0x3 << SERIAL_STOP_SHIFT)
#define SERIAL_GET_STOP(config) \
((config & SERIAL_STOP_MASK) >> SERIAL_STOP_SHIFT)
#define SERIAL_DEFAULT_CONFIG SERIAL_PAR_NONE << SERIAL_PAR_SHIFT | \
SERIAL_8_BITS << SERIAL_BITS_SHIFT | \
SERIAL_ONE_STOP << SERIAL_STOP_SHIFT
/**
* struct struct dm_serial_ops - Driver model serial operations
*
@ -159,6 +192,20 @@ struct dm_serial_ops {
* @return 0 if OK, -ve on error
*/
int (*setparity)(struct udevice *dev, enum serial_par parity);
/**
* setconfig() - Set up the uart configuration
* (parity, 5/6/7/8 bits word length, stop bits)
*
* Set up a new config for this device.
*
* @dev: Device pointer
* @parity: parity to use
* @bits: bits number to use
* @stop: stop bits number to use
* @return 0 if OK, -ve on error
*/
int (*setconfig)(struct udevice *dev, uint serial_config);
};
/**