drivers: net: cpsw: Add reading of DT phy-handle node

Add the ability to read the phy-handle node of the
cpsw slave.  Upon reading this handle the phy-id
can be stored based on the reg node in the DT.

The phy-handle also needs to be stored and passed
to the phy to access any phy data that is available.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Dan Murphy 2016-05-02 15:45:56 -05:00 committed by Joe Hershberger
parent 641b936fa5
commit cb3862277b
2 changed files with 22 additions and 2 deletions

View File

@ -966,6 +966,11 @@ static int cpsw_phy_init(struct cpsw_priv *priv, struct cpsw_slave *slave)
phydev->supported &= supported;
phydev->advertising = phydev->supported;
#ifdef CONFIG_DM_ETH
if (slave->data->phy_of_handle)
phydev->dev->of_offset = slave->data->phy_of_handle;
#endif
priv->phydev = phydev;
phy_config(phydev);
@ -1226,8 +1231,22 @@ static int cpsw_eth_ofdata_to_platdata(struct udevice *dev)
if (phy_mode)
priv->data.slave_data[slave_index].phy_if =
phy_get_interface_by_name(phy_mode);
fdtdec_get_int_array(fdt, subnode, "phy_id", phy_id, 2);
priv->data.slave_data[slave_index].phy_addr = phy_id[1];
priv->data.slave_data[slave_index].phy_of_handle =
fdtdec_lookup_phandle(fdt, subnode,
"phy-handle");
if (priv->data.slave_data[slave_index].phy_of_handle >= 0) {
priv->data.slave_data[slave_index].phy_addr =
fdtdec_get_int(gd->fdt_blob,
priv->data.slave_data[slave_index].phy_of_handle,
"reg", -1);
} else {
fdtdec_get_int_array(fdt, subnode, "phy_id",
phy_id, 2);
priv->data.slave_data[slave_index].phy_addr =
phy_id[1];
}
slave_index++;
}

View File

@ -21,6 +21,7 @@ struct cpsw_slave_data {
u32 sliver_reg_ofs;
int phy_addr;
int phy_if;
int phy_of_handle;
};
enum {