Prepare v2010.03

Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk 2010-03-31 23:54:39 +02:00
parent 8e64d6efd8
commit ca6e1c136d
2 changed files with 153 additions and 1 deletions

152
CHANGELOG
View File

@ -1,3 +1,155 @@
commit 8e64d6efd8d778a5f83d8bff9cd273a86dcc182f
Author: Heiko Schocher <hs@denx.de>
Date: Wed Mar 31 08:34:51 2010 +0200
net, doc: How to setup MAC address correctly
As this seems unclear, document how the flow of setting up
the MAC address is correct.
Signed-off-by: Heiko Schocher <hs@denx.de>
Text changed slightly, adding input from Mike Frysinger.
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit b78b48c6a0c34b2991e31fc4548aaf773d34f2b3
Author: Heiko Schocher <hs@denx.de>
Date: Wed Mar 31 08:34:46 2010 +0200
net, fec_mxc: only setup the device enetaddr with eeprom value
Only fill the device enetaddr with the contents of the eeprom,
do not program it in MAC address registers
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
commit d5a64237d58ded31c2eed455c7a346e1c85f5565
Author: Felix Radensky <felix@embedded-sol.com>
Date: Tue Mar 30 15:02:13 2010 +0300
doc: Fix ramdisk examples in doc/uImage.FIT/multi.its
The ramdisk sections in doc/uImage.FIT/multi.its lack
load address and entry point properties. Using examples
from this file will result in unbootable image, u-boot
will issue the following error messages:
Can't get ramdisk subimage load address!
Ramdisk image is corrupt or invalid
This patch adds missing properties to ramdisk sections.
Signed-off-by: Felix Radensky <felix@embedded-sol.com>
commit 2d2018f3db5ed834bc1ee208a2c6212fdf00bca1
Author: Heiko Schocher <heiko.schocher@invitel.hu>
Date: Wed Mar 24 13:22:50 2010 +0100
jffs2, suen3: Fix compiler warning
$ ./MAKEALL suen3
jffs2_1pass.c: In function 'get_fl_mem':
jffs2_1pass.c:399: warning: unused variable 'id'
jffs2_1pass.c: In function 'get_node_mem':
jffs2_1pass.c:423: warning: unused variable 'id'
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Tom <Tom.Rix@windriver.com>
commit 9ff32d8ccf0e23b5577c25610f001af8d761b4a2
Author: Timur Tabi <timur@freescale.com>
Date: Mon Mar 29 12:51:07 2010 -0500
mpc86xx: set the DDR BATs after calculating true DDR size
After determining how much DDR is actually in the system, set DBAT0 and
IBAT0 accordingly. This ensures that the CPU won't attempt to access
(via speculation) addresses outside of actual memory.
On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB
and kept that way. If the system has less than 2GB of memory (typical for
an MPC8610 HPCD), the CPU may attempt to access this memory during
speculation. The zlib code is notorious for generating such memory reads,
and indeed on the MPC8610, uncompressing the Linux kernel causes a machine
check (without this patch).
Currently we are limited to power of two sized DDR since we only use a
single bat. If a non-power of two size is used that is less than
CONFIG_MAX_MEM_MAPPED u-boot will crash.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 33f57bd553edf29dffef5a6c7d76e169c79a6049
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Fri Mar 26 15:14:43 2010 -0500
85xx: Fix enabling of L1 cache parity on secondary cores
Use the same code between primary and secondary cores to init the
L1 cache. We were not enabling cache parity on the secondary cores.
Also, reworked the L1 cache init code to match the e500mc L2 init code
that first invalidates the cache and locks. Than enables the cache and
makes sure its enabled before continuing.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 1a332da61df9c38b567359af114daeaaaefaead8
Author: Stefan Roese <sr@denx.de>
Date: Mon Mar 29 15:30:46 2010 +0200
ppc4xx: Fix problem with I2C bus >= 1 initialization
This patch fixes a problem introduced with patch eb5eb2b0
[ppc4xx: Cleanup PPC4xx I2C infrastructure]. We need to assign the I2C
base address to the "i2c" pointer inside of the controller loop.
Otherwise controller 0 is initialized multiple times instead of
initializing each I2C controller sequentially.
Tested on Katmai.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
commit 24de2f4be00f81c58270d0df47296bf3a3601cef
Author: Heiko Schocher <hs@denx.de>
Date: Mon Mar 29 13:15:48 2010 +0200
bootm, linux: fix booting Multi-File Image with "kernel+ramdisk+fdt"
Booting a "Multi-File Image" including a linux kernel, ramdisk and
fdt, generated with
mkimage -A ppc \
-O linux \
-T multi \
-C gzip \
-a 00000000 \
-e 00000000 \
-n "kernel-2.6+initrd+dtb" \
-d "vmlinux.bin.gz:ramdisk_image.gz:board.dtb" \
multi.bin
actually fails, because ramdisk start and end addresses
didn;t get initialized. This patch fixes this issue.
Tested on the KUP4K board.
Signed-off-by: Heiko Schocher <hs@denx.de>
commit 2883cc2d48e99fd1873ef8af03fee7966611b735
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Mar 28 00:25:14 2010 +0100
Prepare 2010.03-rc3
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
commit 060f28532b09dd3d2c78423bdd809ac768a27629
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Mar 25 14:07:23 2010 +0100

View File

@ -24,7 +24,7 @@
VERSION = 2010
PATCHLEVEL = 03
SUBLEVEL =
EXTRAVERSION = -rc3
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else