Move default y configs out of arch/board Kconfig

Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Joe Hershberger 2015-06-22 16:15:29 -05:00 committed by Tom Rini
parent 3c85c8b9f9
commit c9bb942e2f
716 changed files with 1170 additions and 365 deletions

View File

@ -4,9 +4,6 @@ menu "ARC architecture"
config SYS_ARCH
default "arc"
config USE_PRIVATE_LIBGCC
default y
config SYS_CPU
default "arcv1" if ISA_ARCOMPACT
default "arcv2" if ISA_ARCV2

View File

@ -74,9 +74,6 @@ endchoice
config SYS_SOC
default "exynos"
config DM_USB
default y
source "board/samsung/smdkv310/Kconfig"
source "board/samsung/trats/Kconfig"
source "board/samsung/universal_c210/Kconfig"

View File

@ -15,9 +15,6 @@ config TARGET_RPI_2
endchoice
config PHYS_TO_BUS
default y
config SYS_BOARD
default "rpi" if TARGET_RPI
default "rpi_2" if TARGET_RPI_2

View File

@ -21,18 +21,6 @@ endchoice
config SYS_MALLOC_F_LEN
default 0x1800
config USE_PRIVATE_LIBGCC
default y
config DM_USB
default y
config SPL_DM
default y
config SPL_DISABLE_OF_CONTROL
default y
source "arch/arm/mach-tegra/tegra20/Kconfig"
source "arch/arm/mach-tegra/tegra30/Kconfig"
source "arch/arm/mach-tegra/tegra114/Kconfig"

View File

@ -8,9 +8,6 @@ config SYS_CPU
default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2
default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2
config USE_PRIVATE_LIBGCC
default y
choice
prompt "Target select"
optional

View File

@ -125,9 +125,6 @@ config SYS_CPU
default "sh3" if CPU_SH3
default "sh4" if CPU_SH4
config USE_PRIVATE_LIBGCC
default y
source "board/alphaproject/ap_sh4a_4a/Kconfig"
source "board/espt/Kconfig"
source "board/mpr2/Kconfig"

View File

@ -4,12 +4,6 @@ menu "x86 architecture"
config SYS_ARCH
default "x86"
config USE_PRIVATE_LIBGCC
default y
config SYS_VSNPRINTF
default y
choice
prompt "Mainboard vendor"
default VENDOR_EMULATION
@ -335,13 +329,4 @@ config PCIE_ECAM_BASE
assigned to PCI devices - i.e. the memory and prefetch regions, as
passed to pci_set_region().
config BOOTSTAGE
default y
config BOOTSTAGE_REPORT
default y
config CMD_BOOTSTAGE
default y
endmenu

View File

@ -12,14 +12,6 @@ config SYS_CONFIG_NAME
string
default "UCP1020"
config SPI_FLASH
bool
default y
config SPI_PCI
bool
default y
choice
prompt "Target image select"

View File

@ -566,25 +566,4 @@ config GMAC_TX_DELAY
---help---
Set the GMAC Transmit Clock Delay Chain value.
config SYS_MALLOC_CLEAR_ON_INIT
default n
config NETDEVICES
default y
config DM_ETH
default y
config DM_SERIAL
default y
config DM_USB
default y if !USB_MUSB_SUNXI
config CMD_SETEXPR
default y
config CMD_NET
default y
endif

View File

@ -5,5 +5,13 @@ CONFIG_DRAM_CLK=480
CONFIG_DRAM_EMR1=4
CONFIG_SYS_CLK_FREQ=912000000
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -7,5 +7,13 @@ CONFIG_MMC1_CD_PIN="PG13"
CONFIG_MMC_SUNXI_SLOT_EXTRA=1
CONFIG_USB1_VBUS_PIN="PB10"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -11,5 +11,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo
CONFIG_VIDEO_LCD_POWER="PB10"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -12,5 +12,13 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -6,6 +6,14 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_USB0_VBUS_PIN="PC17"
CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -3,6 +3,14 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -7,6 +7,14 @@ CONFIG_MMC3_CD_PIN="PH11"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -13,5 +13,11 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y

View File

@ -12,5 +12,11 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y

View File

@ -4,5 +4,13 @@ CONFIG_MACH_SUN5I=y
CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN="PG13"
CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -5,3 +5,4 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4420"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -5,3 +5,4 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_B4860QDS=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_B4860"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -5,3 +5,4 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -5,3 +5,4 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9131RDB=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH,SYS_CLK_100"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9131RDB=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,SPIFLASH"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_100,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -5,3 +5,4 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND_SECBOOT,SYS_CLK_100_DDR_133,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -5,3 +5,4 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_100"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SYS_CLK_100_DDR_133"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_BSC9132QDS=y
CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=432
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -6,6 +6,14 @@ CONFIG_USB1_VBUS_PIN="PH0"
CONFIG_USB2_VBUS_PIN="PH1"
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -6,3 +6,4 @@ CONFIG_TPL=y
CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,NAND"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH,SECURE_BOOT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT,SPIFLASH"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_C29XPCIE=y
CONFIG_SYS_EXTRA_OPTIONS="C29XPCIE,36BIT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -1,7 +1,7 @@
CONFIG_PPC=y
CONFIG_CMD_NET=y
CONFIG_4xx=y
CONFIG_TARGET_CPCI4052=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_CMD_NET=y

View File

@ -5,8 +5,16 @@ CONFIG_DRAM_CLK=432
CONFIG_USB1_VBUS_PIN=""
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -12,8 +12,14 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_VIDEO_LCD_SPI_CS="PA0"
CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
CONFIG_VIDEO_LCD_SPI_MOSI="PA2"

View File

@ -5,7 +5,15 @@ CONFIG_DRAM_CLK=240
CONFIG_DRAM_ZQ=251
CONFIG_USB1_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=480
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -5,6 +5,14 @@ CONFIG_DRAM_CLK=432
CONFIG_VIDEO_VGA=y
CONFIG_GMAC_TX_DELAY=1
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000

View File

@ -7,7 +7,15 @@ CONFIG_USB2_VBUS_PIN=""
CONFIG_VIDEO_VGA_VIA_LCD=y
CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -14,5 +14,11 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y

View File

@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000

View File

@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000

View File

@ -13,7 +13,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3000

View File

@ -6,6 +6,14 @@ CONFIG_DRAM_ZQ=122
CONFIG_USB1_VBUS_PIN="PH11"
CONFIG_GMAC_TX_DELAY=3
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -4,6 +4,14 @@ CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
CONFIG_DRAM_ZQ=122
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_DRAM_CLK=408
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -1,3 +1,4 @@
CONFIG_M68K=y
CONFIG_TARGET_M52277EVB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SPANSION_BOOT,SYS_TEXT_BASE=0x00000000"
CONFIG_SPI_FLASH=y

View File

@ -1,3 +1,4 @@
CONFIG_M68K=y
CONFIG_TARGET_M52277EVB=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x43E00000"
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54418TWR=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54418TWR=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54418TWR=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54418TWR=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54418TWR=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54418TWR=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54451EVB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54451EVB=y
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54455EVB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=66666666"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54455EVB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54455EVB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=66666666"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54455EVB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=33333333"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -2,3 +2,4 @@ CONFIG_M68K=y
CONFIG_TARGET_M54455EVB=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_TEXT_BASE=0x4FE00000,SYS_INPUT_CLKSRC=33333333"
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y
CONFIG_SYS_EXTRA_OPTIONS="36BIT"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y
CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -4,3 +4,4 @@ CONFIG_TARGET_MPC8536DS=y
CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -3,3 +3,4 @@ CONFIG_MPC85xx=y
CONFIG_TARGET_MPC8536DS=y
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_SPI_FLASH=y

View File

@ -9,5 +9,13 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
CONFIG_VIDEO_LCD_BL_PWM="PB2"
# CONFIG_USB_KEYBOARD is not set
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -3,13 +3,23 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_CLK=360
CONFIG_DRAM_ZQ=122
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_AXP_GPIO=y
CONFIG_VIDEO_LCD_MODE="x:768,y:1024,depth:18,pclk_khz:66000,le:56,ri:60,up:30,lo:36,hs:64,vs:50,sync:3,vmode:0"
CONFIG_VIDEO_LCD_BL_EN="PA25"
CONFIG_VIDEO_LCD_BL_PWM="PH13"
CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
CONFIG_USB_MUSB_SUNXI=y
# CONFIG_USB_KEYBOARD is not set
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
@ -17,7 +27,4 @@ CONFIG_VIDEO_LCD_SPI_CS="PH9"
CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
CONFIG_VIDEO_LCD_SPI_MISO="PH12"
CONFIG_AXP_GPIO=y
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB=y

View File

@ -2,5 +2,13 @@ CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -1,13 +1,3 @@
# The Mele A1000G quad is yet another Allwinnner based Android top set box
# from Mele.
#
# It uses the same case as the original Mele A1000 and the same PCB as the M9,
# the USM sata storage slot is connected via anusb to sata bridge connected to
# the otg controller, this renders the micro USB B receptacle non functional.
#
# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
# RTL R8188EU (USB) wifi and a full size sdcard slot
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
@ -15,10 +5,18 @@ CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -3,5 +3,13 @@ CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN4I=y
CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -5,10 +5,18 @@ CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -6,6 +6,14 @@ CONFIG_MMC0_CD_PIN="PH1"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_VIDEO_VGA=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -5,6 +5,14 @@ CONFIG_DRAM_CLK=432
CONFIG_DRAM_ZQ=122
CONFIG_MMC0_CD_PIN="PH1"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -1,13 +1,3 @@
# The Mele M9 is yet another Allwinnner based Android top set box from Mele.
#
# It uses the same PCB as the A1000G quad, but in a new case without a
# USM sata storage slot, and the space on the PCB for the usb to sata
# bridge connected to the otg controller is not populated, possible
# making the micro usb otg connector functional (untested)
#
# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
# micro USB B receptacle, RTL R8188EU (USB) and a full size sdcard slot
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
@ -15,10 +5,18 @@ CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_DM_SERIAL=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -1,11 +1,18 @@
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
CONFIG_VIDEO=n
CONFIG_USB_KEYBOARD=n
CONFIG_MMC0_CD_PIN="PH18"
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN9I=y
# these are unused atm but we must set them to something
CONFIG_DRAM_CLK=360
CONFIG_DRAM_ZQ=123
CONFIG_SYS_CLK_FREQ=1008000000
CONFIG_MMC0_CD_PIN="PH18"
# CONFIG_VIDEO is not set
# CONFIG_USB_KEYBOARD is not set
CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CMD_SETEXPR=y
CONFIG_CMD_NET=y
CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_DM_USB=y

Some files were not shown because too many files have changed in this diff Show More