Drop CONFIG_INIT_CRITICAL

This is now deprecated and no board is using it. Drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
This commit is contained in:
Bin Meng 2018-11-22 11:26:26 +01:00 committed by Andes
parent 2a23ac6107
commit c95cafd0b1
5 changed files with 1 additions and 73 deletions

View File

@ -200,14 +200,6 @@ update_gp:
jal turnoff_watchdog
#endif
/*
* Do CPU critical regs init only at reboot,
* not when booting from ram
*/
#ifdef CONFIG_INIT_CRITICAL
jal cpu_init_crit ! Do CPU critical regs init
#endif
/*
* Set stackpointer in internal RAM to call board_init_f
* $sp must be 8-byte alignment for ABI compliance.
@ -318,49 +310,6 @@ call_board_init_r:
/* jump to it ... */
jr $lp /* jump to board_init_r() */
/*
* Initialize CPU critical registers
*
* 1. Setup control registers
* 1.1 Mask all IRQs
* 1.2 Flush cache and TLB
* 1.3 Disable MMU and cache
* 2. Setup memory timing
*/
cpu_init_crit:
move $r0, $lp /* push ra */
/* Disable Interrupts by clear GIE in $PSW reg */
setgie.d
/* Flush caches and TLB */
/* Invalidate caches */
jal invalidate_icac
jal invalidate_dcac
/* Flush TLB */
mfsr $p0, $MMU_CFG
andi $p0, $p0, 0x3 ! MMPS
li $p1, 0x2 ! TLB MMU
bne $p0, $p1, 1f
tlbop flushall ! Flush TLB
1:
! Disable MMU, Dcache
! Whitiger is MMU disabled when reset
! Disable the D$
mfsr $p0, MR_CAC_CTL ! Get the $CACHE_CTL reg
li $p1, DIS_DCAC
and $p0, $p0, $p1 ! Set DC_EN bit
mtsr $p0, MR_CAC_CTL ! write back the $CACHE_CTL reg
isb
move $lp, $r0
2:
ret
/*
* Invalidate I$
*/

View File

@ -50,14 +50,6 @@ handle_reset:
csrwi mstatus, 0
csrwi mie, 0
/*
* Do CPU critical regs init only at reboot,
* not when booting from ram
*/
#ifdef CONFIG_INIT_CRITICAL
jal cpu_init_crit /* Do CPU critical regs init */
#endif
/*
* Set stackpointer in internal/ex RAM to call board_init_f
*/
@ -285,8 +277,3 @@ trap_entry:
LREG x31, 31*REGBYTES(sp)
addi sp, sp, 32*REGBYTES
mret
#ifdef CONFIG_INIT_CRITICAL
cpu_init_crit:
ret
#endif

View File

@ -36,9 +36,7 @@ In case c) it may be necessary for U-Boot to perform CM dependent initialization
Configuring U-Boot :
------------------
The makefile contains targets for Integrator platforms of both types
fitted with all current variants of CM. If these targets are to be used with
boot process c) above then CONFIG_INIT_CRITICAL may need to be defined to ensure
that the CM is correctly configured.
fitted with all current variants of CM.
There are also targets independent of CM. These may not be suitable for
boot process c) above. They have been preserved for backward compatibility with

View File

@ -549,11 +549,6 @@ int cpu_release(u32 nr, int argc, char * const argv[]);
#endif
#endif
#ifdef CONFIG_INIT_CRITICAL
#error CONFIG_INIT_CRITICAL is deprecated!
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
/*

View File

@ -961,7 +961,6 @@ CONFIG_IMX_OTP
CONFIG_IMX_VIDEO_SKIP
CONFIG_INETSPACE_V2
CONFIG_INITRD_TAG
CONFIG_INIT_CRITICAL
CONFIG_INIT_IGNORE_ERROR
CONFIG_INI_ALLOW_MULTILINE
CONFIG_INI_CASE_INSENSITIVE