brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL

Browse Source 
Cleanup this driver to use dt in U-boot and static platdata in SPL.
This requires the following steps:

1. Move all platdata assignment from probe() to ofdata_to_platdata().
   This function is only called in U-boot.
2. Replicate all the platdata assignment being done in
   ofdata_to_platdata() in the omapl138 board file. This data is used in
   the SPL case where SPL_OF_CONTROL is not enabled.
3. Remove SPL_OF_CONTROL and related configs from omapl138_lcdk_defconfig

This cleanup effectively reverts 3ef94715cc ('mmc: davinci: fix mmc boot in SPL')

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This commit is contained in:
Faiz Abbas 2020-05-22 07:32:28 +05:30 committed by Lokesh Vutla
parent fedfa374ff
commit c78ae11e07
4 changed files with 45 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/arm/mach-davinci/include/mach/sdmmc_defs.h
View File

@ -152,6 +152,13 @@ struct davinci_mmc {
struct mmc_config cfg;
};
#define DAVINCI_MAX_BLOCKS (32)
struct davinci_mmc_plat {
struct davinci_mmc_regs *reg_base; /* Register base address */
struct mmc_config cfg;
struct mmc mmc;
};
int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host);
#endif /* _SDMMC_DEFS_H */

12
board/davinci/da8xxevm/omapl138_lcdk.c
View File

@ -368,8 +368,20 @@ U_BOOT_DEVICE(omapl138_uart) = {
.platdata = &serial_pdata,
};
static const struct davinci_mmc_plat mmc_platdata = {
.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
.cfg = {
.f_min = 200000,
.f_max = 25000000,
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
.host_caps = MMC_MODE_4BIT,
.b_max = DAVINCI_MAX_BLOCKS,
.name = "da830-mmc",
},
};
U_BOOT_DEVICE(omapl138_mmc) = {
.name = "davinci_mmc",
.platdata = &mmc_platdata,
};
void spl_board_init(void)

4
configs/omapl138_lcdk_defconfig
View File

@ -40,16 +40,13 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_DIAG=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="da850-lcdk"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DAVINCI=y
@ -82,4 +79,3 @@ CONFIG_USB_MUSB_HOST=y
CONFIG_USB_MUSB_DA8XX=y
CONFIG_USB_MUSB_PIO_ONLY=y
CONFIG_USB_STORAGE=y
# CONFIG_SPL_OF_LIBFDT is not set

63
drivers/mmc/davinci_mmc.c
View File

@ -18,7 +18,6 @@
#include <asm-generic/gpio.h>
#include <linux/delay.h>
#define DAVINCI_MAX_BLOCKS (32)
#define WATCHDOG_COUNT (100000)
#define get_val(addr) REG(addr)
@ -34,12 +33,6 @@ struct davinci_mmc_priv {
struct gpio_desc cd_gpio; /* Card Detect GPIO */
struct gpio_desc wp_gpio; /* Write Protect GPIO */
};
struct davinci_mmc_plat
{
struct mmc_config cfg;
struct mmc mmc;
};
#endif
/* Set davinci clock prescalar value based on the required clock in HZ */
@ -487,43 +480,16 @@ static int davinci_mmc_probe(struct udevice *dev)
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct davinci_mmc_plat *plat = dev_get_platdata(dev);
struct davinci_mmc_priv *priv = dev_get_priv(dev);
struct mmc_config *cfg = &plat->cfg;
#ifdef CONFIG_SPL_BUILD
int ret;
#endif
cfg->f_min = 200000;
cfg->f_max = 25000000;
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
cfg->host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */
cfg->b_max = DAVINCI_MAX_BLOCKS;
cfg->name = "da830-mmc";
priv->reg_base = (struct davinci_mmc_regs *)dev_read_addr(dev);
priv->reg_base = plat->reg_base;
priv->input_clk = clk_get(DAVINCI_MMCSD_CLKID);
#if CONFIG_IS_ENABLED(DM_GPIO)
/* These GPIOs are optional */
gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN);
gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN);
#endif
upriv->mmc = &plat->mmc;
#ifdef CONFIG_SPL_BUILD
/*
* FIXME This is a temporary workaround to enable the driver model in
* SPL on omapl138-lcdk. For some reason the bind() callback is not
* being called in SPL for MMC which breaks the mmc boot - the hack
* is to call mmc_bind() from probe(). We also don't have full DT
* support in SPL, hence the hard-coded base register address.
*/
priv->reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE;
ret = mmc_bind(dev, &plat->mmc, &plat->cfg);
if (ret)
return ret;
#endif
return davinci_dm_mmc_init(dev);
}
@ -534,21 +500,44 @@ static int davinci_mmc_bind(struct udevice *dev)
return mmc_bind(dev, &plat->mmc, &plat->cfg);
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
static int davinci_mmc_ofdata_to_platdata(struct udevice *dev)
{
struct davinci_mmc_plat *plat = dev_get_platdata(dev);
struct mmc_config *cfg = &plat->cfg;
plat->reg_base = (struct davinci_mmc_regs *)dev_read_addr(dev);
cfg->f_min = 200000;
cfg->f_max = 25000000;
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
cfg->host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */
cfg->b_max = DAVINCI_MAX_BLOCKS;
cfg->name = "da830-mmc";
return 0;
}
static const struct udevice_id davinci_mmc_ids[] = {
{ .compatible = "ti,da830-mmc" },
{},
};
#endif
U_BOOT_DRIVER(davinci_mmc_drv) = {
.name = "davinci_mmc",
.id = UCLASS_MMC,
#if CONFIG_IS_ENABLED(OF_CONTROL)
.of_match = davinci_mmc_ids,
.platdata_auto_alloc_size = sizeof(struct davinci_mmc_plat),
.ofdata_to_platdata = davinci_mmc_ofdata_to_platdata,
#endif
#if CONFIG_BLK
.bind = davinci_mmc_bind,
#endif
.probe = davinci_mmc_probe,
.ops = &davinci_mmc_ops,
.platdata_auto_alloc_size = sizeof(struct davinci_mmc_plat),
.priv_auto_alloc_size = sizeof(struct davinci_mmc_priv),
#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
#endif
};
#endif