Merge branch 'master' of git://git.denx.de/u-boot-sh

This commit is contained in:
Wolfgang Denk 2011-01-12 23:59:53 +01:00
commit c6b734f5ae
21 changed files with 1309 additions and 224 deletions

View File

@ -1011,6 +1011,7 @@ Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
SH7763RDP SH7763
RSK7203 SH7203
AP325RXA SH7723
SHMIN SH7706
Mark Jonas <mark.jonas@de.bosch.com>

View File

@ -1,5 +1,5 @@
/*
* (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* (C) Copyright 2007-2009 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* (C) Copyright 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*
* This program is free software; you can redistribute it and/or
@ -31,7 +31,9 @@
#define CACHE_OC_NUM_ENTRIES 256
#define CACHE_OC_ENTRY_SHIFT 4
#if defined(CONFIG_CPU_SH7710)
#if defined(CONFIG_CPU_SH7706)
#include <asm/cpu_sh7706.h>
#elif defined(CONFIG_CPU_SH7710)
#include <asm/cpu_sh7710.h>
#elif defined(CONFIG_CPU_SH7720)
#include <asm/cpu_sh7720.h>

View File

@ -0,0 +1,53 @@
#ifndef _ASM_CPU_SH7706_H_
#define _ASM_CPU_SH7706_H_
#define CACHE_OC_NUM_WAYS 4
#define CCR_CACHE_INIT 0x0000000D
/* MMU and Cache control */
#define MMUCR 0xFFFFFFE0
#define CCR 0xFFFFFFEC
/* PFC */
#define PACR 0xA4050100
#define PBCR 0xA4050102
#define PCCR 0xA4050104
#define PETCR 0xA4050106
/* Port Data Registers */
#define PADR 0xA4050120
#define PBDR 0xA4050122
#define PCDR 0xA4050124
/* BSC */
#define FRQCR 0xffffff80
#define BCR1 0xffffff60
#define BCR2 0xffffff62
#define WCR1 0xffffff64
#define WCR2 0xffffff66
#define MCR 0xffffff68
/* SDRAM controller */
#define DCR 0xffffff6a
#define RTCSR 0xffffff6e
#define RTCNT 0xffffff70
#define RTCOR 0xffffff72
#define RFCR 0xffffff74
#define SDMR 0xFFFFD000
#define CS3_R 0xFFFFE460
/* SCIF */
#define SCSMR_2 0xA4000150
#define SCIF0_BASE SCSMR_2
/* Timer */
#define TSTR0 0xFFFFFE92
#define TSTR TSTR0
#define TCNT0 0xFFFFFE98
#define TCR0 0xFFFFFE9C
/* On chip oscillator circuits */
#define WTCNT 0xFFFFFF84
#define WTCSR 0xFFFFFF86
#endif /* _ASM_CPU_SH7706_H_ */

View File

@ -325,44 +325,6 @@
#define SPICR1 0xA4420030
/* SCIF */
/*
#define SCSMR 0xFFE00000
#define SCBRR 0xFFE00004
#define SCSCR 0xFFE00008
#define SCFTDR 0xFFE0000C
#define SCFSR 0xFFE00010
#define SCFRDR 0xFFE00014
#define SCFCR 0xFFE00018
#define SCFDR 0xFFE0001C
#define SCLSR 0xFFE00024
#define SCSMR1 0xFFE10000
#define SCBRR1 0xFFE10004
#define SCSCR1 0xFFE10008
#define SCFTDR1 0xFFE1000C
#define SCFSR1 0xFFE10010
#define SCFRDR1 0xFFE10014
#define SCFCR1 0xFFE10018
#define SCFDR1 0xFFE1001C
#define SCLSR1 0xFFE10024
#define SCSMR2 0xFFE20000
#define SCBRR2 0xFFE20004
#define SCSCR2 0xFFE20008
#define SCFTDR2 0xFFE2000C
#define SCFSR2 0xFFE20010
#define SCFRDR2 0xFFE20014
#define SCFCR2 0xFFE20018
#define SCFDR2 0xFFE2001C
#define SCLSR2 0xFFE20024
#define SCSMR3 0xFFE30000
#define SCBRR3 0xFFE30004
#define SCSCR3 0xFFE30008
#define SCFTDR3 0xFFE3000C
#define SCFSR3 0xFFE30010
#define SCFRDR3 0xFFE30014
#define SCFCR3 0xFFE30018
#define SCFDR3 0xFFE3001C
#define SCLSR3 0xFFE30024
*/
#define SCIF0_BASE 0xFFE00000
/* SIM */

View File

@ -166,26 +166,10 @@
/* SCI */
#define SCSMR1 0xFFE00000
#define SCBRR1 0xFFE00004
#define SCSCR1 0xFFE00008
#define SCTDR1 0xFFE0000C
#define SCSSR1 0xFFE00010
#define SCRDR1 0xFFE00014
#define SCSCMR1 0xFFE00018
#define SCSPTR1 0xFFE0001C
#define SCF0_BASE SCSMR1
/* SCIF */
#define SCSMR2 0xFFE80000
#define SCBRR2 0xFFE80004
#define SCSCR2 0xFFE80008
#define SCFTDR2 0xFFE8000C
#define SCFSR2 0xFFE80010
#define SCFRDR2 0xFFE80014
#define SCFCR2 0xFFE80018
#define SCFDR2 0xFFE8001C
#define SCSPTR2 0xFFE80020
#define SCLSR2 0xFFE80024
#define SCIF1_BASE SCSMR2
/* H-UDI */

View File

@ -333,27 +333,8 @@
#define RYRAR 0xFFE80054
/* Serial Communication Interface with FIFO */
#define SCIF0_BASE SCSMR0
#define SCSMR0 0xFFE00000
#define SCBRR0 0xFFE00004
#define SCSCR0 0xFFE00008
#define SCFSR0 0xFFE00010
#define SCFCR0 0xFFE00018
#define SCTFDR0 0xFFE0001C
#define SCRFDR0 0xFFE00020
#define SCSPTR0 0xFFE00024
#define SCLSR0 0xFFE00028
#define SCRER0 0xFFE0002C
#define SCSMR1 0xFFE10000
#define SCBRR1 0xFFE10004
#define SCSCR1 0xFFE10008
#define SCFSR1 0xFFE10010
#define SCFCR1 0xFFE10018
#define SCTFDR1 0xFFE1001C
#define SCRFDR1 0xFFE10020
#define SCSPTR1 0xFFE10024
#define SCLSR1 0xFFE10028
#define SCRER1 0xFFE1002C
#define SCIF0_BASE SCSMR0
/* Serial I/O with FIFO */
#define SIMDR 0xFFE20000

View File

@ -0,0 +1,41 @@
/*
* (C) Copyright 2010
* Renesas Solutions Corp.
* Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _ASM_ZIMAGE_H_
#define _ASM_ZIMAGE_H_
#define MOUNT_ROOT_RDONLY 0x000
#define RAMDISK_FLAGS 0x004
#define ORIG_ROOT_DEV 0x008
#define LOADER_TYPE 0x00c
#define INITRD_START 0x010
#define INITRD_SIZE 0x014
#define COMMAND_LINE 0x100
#define RD_PROMPT (1<<15)
#define RD_DOLOAD (1<<14)
#define CMD_ARG_RD_PROMPT "prompt_ramdisk="
#define CMD_ARG_RD_DOLOAD "load_ramdisk="
#endif

View File

@ -31,6 +31,9 @@ COBJS-y += time_sh2.o
else
COBJS-y += time.o
endif
ifeq ($(CONFIG_CMD_SH_ZIMAGEBOOT),y)
COBJS-y += zimageboot.o
endif
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))

View File

@ -1,5 +1,5 @@
/*
* Copyright (C) 2007,2008
* Copyright (C) 2007, 2008, 2010
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* This program is free software; you can redistribute it and/or
@ -46,7 +46,11 @@ unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
static int sh_flash_init(void)
{
gd->bd->bi_flashsize = flash_init();
printf("FLASH: %ldMB\n", gd->bd->bi_flashsize / (1024*1024));
if (gd->bd->bi_flashsize >= (1024 * 1024))
printf("FLASH: %ldMB\n", gd->bd->bi_flashsize / (1024*1024));
else
printf("FLASH: %ldKB\n", gd->bd->bi_flashsize / 1024);
return 0;
}

View File

@ -27,6 +27,7 @@
#include <common.h>
#include <command.h>
#include <asm/byteorder.h>
#include <asm/zimage.h>
#ifdef CONFIG_SYS_DEBUG
static void hexdump(unsigned char *buf, int len)
@ -43,19 +44,6 @@ static void hexdump(unsigned char *buf, int len)
}
#endif
#define MOUNT_ROOT_RDONLY 0x000
#define RAMDISK_FLAGS 0x004
#define ORIG_ROOT_DEV 0x008
#define LOADER_TYPE 0x00c
#define INITRD_START 0x010
#define INITRD_SIZE 0x014
#define COMMAND_LINE 0x100
#define RD_PROMPT (1<<15)
#define RD_DOLOAD (1<<14)
#define CMD_ARG_RD_PROMPT "prompt_ramdisk="
#define CMD_ARG_RD_DOLOAD "load_ramdisk="
#ifdef CONFIG_SH_SDRAM_OFFSET
#define GET_INITRD_START(initrd, linux) (initrd - linux + CONFIG_SH_SDRAM_OFFSET)
#else
@ -94,13 +82,12 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
return 1;
/* Setup parameters */
memset(param, 0, size); /* Clear zero page */
/* Clear zero page */
memset(param, 0, size);
/* Set commandline */
strcpy(cmdline, bootargs);
sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10);
/* Initrd */
if (images->rd_start || images->rd_end) {
unsigned long ramdisk_flags = 0;
@ -128,7 +115,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima
/* Boot kernel */
kernel();
/* does not return */
/* does not return */
return 1;
}

80
arch/sh/lib/zimageboot.c Normal file
View File

@ -0,0 +1,80 @@
/*
* (C) Copyright 2010
* Renesas Solutions Corp.
* Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Linux SuperH zImage loading and boot
*/
#include <common.h>
#include <asm/io.h>
#include <asm/zimage.h>
int do_sh_zimageboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong (*zboot_entry)(int, char * const []) = NULL;
char *s0, *s1;
unsigned char *param = NULL;
char *cmdline;
char *bootargs;
disable_interrupts();
if (argc >= 3) {
/* argv[1] holds the address of the zImage */
s0 = argv[1];
/* argv[2] holds the address of zero page */
s1 = argv[2];
} else {
goto exit;
}
if (s0)
zboot_entry = (ulong (*)(int, char * const []))simple_strtoul(s0, NULL, 16);
/* empty_zero_page */
if (s1)
param = (unsigned char*)simple_strtoul(s1, NULL, 16);
/* Linux kernel command line */
cmdline = (char *)param + COMMAND_LINE;
bootargs = getenv("bootargs");
/* Clear zero page */
memset(param, 0, 0x1000);
/* Set commandline */
strcpy(cmdline, bootargs);
/* Boot */
zboot_entry(0, NULL);
exit:
return -1;
}
U_BOOT_CMD(
zimageboot, 3, 0, do_sh_zimageboot,
"Boot zImage for Renesas SH",
""
);

49
board/shmin/Makefile Normal file
View File

@ -0,0 +1,49 @@
#
# Copyright (C) 2010 Nobuhiro Iwamatsu
# Copyright (C) 2008 Renesas Solutions Corp.
#
# u-boot/board/shmin/Makefile
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).o
OBJS := shmin.o
SOBJS := lowlevel_init.o
LIB := $(addprefix $(obj),$(LIB))
OBJS := $(addprefix $(obj),$(OBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

27
board/shmin/config.mk Normal file
View File

@ -0,0 +1,27 @@
#
# Copyright (C) 2010 Nobuhiro Iwamatsu
#
# u-boot/board/shmin/config.mk
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
# TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
CONFIG_SYS_TEXT_BASE = 0x8DFB0000

View File

@ -0,0 +1,36 @@
/*
* (C) Copyright 2008, 2010 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/processor.h>
#include <asm/macro.h>
.global lowlevel_init
.text
.align 2
lowlevel_init:
/* Use setting of original bootloader */
rts
nop
.align 2

108
board/shmin/shmin.c Normal file
View File

@ -0,0 +1,108 @@
/*
* Copyright (C) 2007 - 2010
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* board/shmin/shmin.c
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Copy board_flash_get_legacy() from board/freescale/m54455evb/m54455evb.c
*/
#include <common.h>
#include <asm/io.h>
#include <asm/processor.h>
int checkboard(void)
{
puts("BOARD: T-SH7706LAN ");
if(readb(0xb0008006) == 0xab)
puts("v2\n");
else
puts("v1\n");
return 0;
}
int board_init(void)
{
writew(0x2980, BCR2);
return 0;
}
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
return 0;
}
void led_set_state(unsigned short value)
{
}
#if defined(CONFIG_FLASH_CFI_LEGACY)
#include <flash.h>
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
int sect[] = CONFIG_SYS_ATMEL_SECT;
int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
int i, j, k;
if (base != CONFIG_SYS_ATMEL_BASE)
return 0;
info->flash_id = 0x01000000;
info->portwidth = 1;
info->chipwidth = 1;
info->buffer_size = 1;
info->erase_blk_tout = 16384;
info->write_tout = 2;
info->buffer_write_tout = 5;
info->vendor = 0xFFF0; /* CFI_CMDSET_AMD_LEGACY */
info->cmd_reset = 0x00F0;
info->interface = FLASH_CFI_X8;
info->legacy_unlock = 0;
info->manufacturer_id = (u16) ATM_MANUFACT;
info->device_id = ATM_ID_LV040;
info->device_id2 = 0;
info->ext_addr = 0;
info->cfi_version = 0x3133;
info->cfi_offset = 0x0000;
info->addr_unlock1 = 0x00000555;
info->addr_unlock2 = 0x000002AA;
info->name = "CFI conformant";
info->size = 0;
info->sector_count = CONFIG_SYS_ATMEL_TOTALSECT;
info->start[0] = base;
for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
info->size += sect[i] * sectsz[i];
for (j = 0; j < sect[i]; j++, k++) {
info->start[k + 1] = info->start[k] + sectsz[i];
info->protect[k] = 0;
}
}
return 1;
}
#endif /* CONFIG_FLASH_CFI_LEGACY */

View File

@ -745,6 +745,7 @@ xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx
rsk7203 sh sh2 rsk7203 renesas -
mpr2 sh sh3 mpr2 - -
ms7720se sh sh3 ms7720se - -
shmin sh sh3 shmin - -
espt sh sh4 espt - -
ms7722se sh sh4 ms7722se - -
ms7750se sh sh4 ms7750se - -

View File

@ -1,6 +1,7 @@
/*
* SuperH SCIF device driver.
* Copyright (c) 2007,2008 Nobuhiro Iwamatsu
* Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu
* Copyright (C) 2002 - 2008 Paul Mundt
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -20,8 +21,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#include "serial_sh.h"
#if defined(CONFIG_CONS_SCIF0)
# define SCIF_BASE SCIF0_BASE
@ -39,139 +39,88 @@ DECLARE_GLOBAL_DATA_PTR;
# error "Default SCIF doesn't set....."
#endif
/* Base register */
#define SCSMR (vu_short *)(SCIF_BASE + 0x0)
#define SCBRR (vu_char *)(SCIF_BASE + 0x4)
#define SCSCR (vu_short *)(SCIF_BASE + 0x8)
#define SCFCR (vu_short *)(SCIF_BASE + 0x18)
#define SCFDR (vu_short *)(SCIF_BASE + 0x1C)
#if defined(CONFIG_CPU_SH7720) || \
(defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A))
# define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */
# define SCFTDR (vu_char *)(SCIF_BASE + 0x20)
# define SCFRDR (vu_char *)(SCIF_BASE + 0x24)
#if defined(CONFIG_SCIF_A)
#define SCIF_BASE_PORT PORT_SCIFA
#else
# define SCFTDR (vu_char *)(SCIF_BASE + 0xC)
# define SCFSR (vu_short *)(SCIF_BASE + 0x10)
# define SCFRDR (vu_char *)(SCIF_BASE + 0x14)
#define SCIF_BASE_PORT PORT_SCIF
#endif
#if defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785)
# define SCRFDR (vu_short *)(SCIF_BASE + 0x20)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x24)
# define SCLSR (vu_short *)(SCIF_BASE + 0x28)
# define SCRER (vu_short *)(SCIF_BASE + 0x2C)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0xFF
#elif defined(CONFIG_CPU_SH7763)
# if defined(CONFIG_CONS_SCIF2)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0x1F
# else
# define SCRFDR (vu_short *)(SCIF_BASE + 0x20)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x24)
# define SCLSR (vu_short *)(SCIF_BASE + 0x28)
# define SCRER (vu_short *)(SCIF_BASE + 0x2C)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0xFF
# endif
#elif defined(CONFIG_CPU_SH7723)
# if defined(CONFIG_SCIF_A)
# define SCLSR SCFSR
# define LSR_ORER 0x0200
# define FIFOLEVEL_MASK 0x3F
#else
# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0x1F
#endif
#elif defined(CONFIG_CPU_SH7750) || \
defined(CONFIG_CPU_SH7751) || \
defined(CONFIG_CPU_SH7722) || \
defined(CONFIG_CPU_SH7203)
# define SCSPTR (vu_short *)(SCIF_BASE + 0x20)
# define SCLSR (vu_short *)(SCIF_BASE + 0x24)
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0x1F
#elif defined(CONFIG_CPU_SH7720)
# define SCLSR SCFSR
# define LSR_ORER 0x0200
# define FIFOLEVEL_MASK 0x1F
#elif defined(CONFIG_CPU_SH7710) || \
defined(CONFIG_CPU_SH7712)
# define SCLSR SCFSR /* SCSSR */
# define LSR_ORER 1
# define FIFOLEVEL_MASK 0x1F
#endif
/* SCBRR register value setting */
#if defined(CONFIG_CPU_SH7720)
# define SCBRR_VALUE(bps, clk) (((clk * 2) + 16 * bps) / (32 * bps) - 1)
#elif defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A)
/* SH7723 SCIFA use bus clock. So clock *2 */
# define SCBRR_VALUE(bps, clk) (((clk * 2 * 2) + 16 * bps) / (32 * bps) - 1)
#else /* Generic SuperH */
# define SCBRR_VALUE(bps, clk) ((clk + 16 * bps) / (32 * bps) - 1)
#endif
#define SCR_RE (1 << 4)
#define SCR_TE (1 << 5)
#define FCR_RFRST (1 << 1) /* RFCL */
#define FCR_TFRST (1 << 2) /* TFCL */
#define FSR_DR (1 << 0)
#define FSR_RDF (1 << 1)
#define FSR_FER (1 << 3)
#define FSR_BRK (1 << 4)
#define FSR_FER (1 << 3)
#define FSR_TEND (1 << 6)
#define FSR_ER (1 << 7)
/*----------------------------------------------------------------------*/
static struct uart_port sh_sci = {
.membase = (unsigned char*)SCIF_BASE,
.mapbase = SCIF_BASE,
.type = SCIF_BASE_PORT,
};
void serial_setbrg(void)
{
writeb(SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ), SCBRR);
DECLARE_GLOBAL_DATA_PTR;
sci_out(&sh_sci, SCBRR, SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ));
}
int serial_init(void)
{
writew((SCR_RE | SCR_TE), SCSCR);
writew(0, SCSMR);
writew(0, SCSMR);
writew((FCR_RFRST | FCR_TFRST), SCFCR);
readw(SCFCR);
writew(0, SCFCR);
sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
sci_out(&sh_sci, SCSMR, 0);
sci_out(&sh_sci, SCSMR, 0);
sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
sci_in(&sh_sci, SCFCR);
sci_out(&sh_sci, SCFCR, 0);
serial_setbrg();
return 0;
}
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCRFDR) & 0xff;
}
#elif defined(CONFIG_CPU_SH7763)
static int scif_rxfill(struct uart_port *port)
{
if ((port->mapbase == 0xffe00000) ||
(port->mapbase == 0xffe08000)) {
/* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
} else {
/* SCIF2 */
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
#elif defined(CONFIG_ARCH_SH7372)
static int scif_rxfill(struct uart_port *port)
{
if (port->type == PORT_SCIFA)
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
else
return sci_in(port, SCRFDR);
}
#else
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
static int serial_rx_fifo_level(void)
{
#if defined(SCRFDR)
return (readw(SCRFDR) >> 0) & FIFOLEVEL_MASK;
#else
return (readw(SCFDR) >> 0) & FIFOLEVEL_MASK;
#endif
return scif_rxfill(&sh_sci);
}
void serial_raw_putc(const char c)
{
unsigned int fsr_bits_to_clear;
while (1) {
if (readw(SCFSR) & FSR_TEND) { /* Tx fifo is empty */
fsr_bits_to_clear = FSR_TEND;
/* Tx fifo is empty */
if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci))
break;
}
}
writeb(c, SCFTDR);
if (fsr_bits_to_clear != 0)
writew(readw(SCFSR) & ~fsr_bits_to_clear, SCFSR);
sci_out(&sh_sci, SCxTDR, c);
sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci));
}
void serial_putc(const char c)
@ -193,27 +142,25 @@ int serial_tstc(void)
return serial_rx_fifo_level() ? 1 : 0;
}
#define FSR_ERR_CLEAR 0x0063
#define RDRF_CLEAR 0x00fc
void handle_error(void)
{
readw(SCFSR);
writew(FSR_ERR_CLEAR, SCFSR);
readw(SCLSR);
writew(0x00, SCLSR);
sci_in(&sh_sci, SCxSR);
sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
sci_in(&sh_sci, SCLSR);
sci_out(&sh_sci, SCLSR, 0x00);
}
int serial_getc_check(void)
{
unsigned short status;
status = readw(SCFSR);
status = sci_in(&sh_sci, SCxSR);
if (status & (FSR_FER | FSR_ER | FSR_BRK))
if (status & SCIF_ERRORS)
handle_error();
if (readw(SCLSR) & LSR_ORER)
if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
handle_error();
return status & (FSR_DR | FSR_RDF);
return status & (SCIF_DR | SCxSR_RDxF(&sh_sci));
}
int serial_getc(void)
@ -224,16 +171,15 @@ int serial_getc(void)
while (!serial_getc_check())
;
ch = readb(SCFRDR);
status = readw(SCFSR);
ch = sci_in(&sh_sci, SCxRDR);
status = sci_in(&sh_sci, SCxSR);
writew(RDRF_CLEAR, SCFSR);
sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci));
if (status & (FSR_FER | FSR_FER | FSR_ER | FSR_BRK))
if (status & SCIF_ERRORS)
handle_error();
if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
handle_error();
if (readw(SCLSR) & LSR_ORER)
handle_error();
return ch;
}

690
drivers/serial/serial_sh.h Normal file
View File

@ -0,0 +1,690 @@
/*
* Copy and modify from linux/drivers/serial/sh-sci.h
*/
struct uart_port {
unsigned long iobase; /* in/out[bwl] */
unsigned char *membase; /* read/write[bwl] */
unsigned long mapbase; /* for ioremap */
unsigned int type; /* port type */
};
#define PORT_SCI 52
#define PORT_SCIF 53
#define PORT_SCIFA 83
#define PORT_SCIFB 93
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
#include <asm/regs306x.h>
#endif
#if defined(CONFIG_H8S2678)
#include <asm/regs267x.h>
#endif
#if defined(CONFIG_CPU_SH7706) || \
defined(CONFIG_CPU_SH7707) || \
defined(CONFIG_CPU_SH7708) || \
defined(CONFIG_CPU_SH7709)
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
#elif defined(CONFIG_CPU_SH7705)
# define SCIF0 0xA4400000
# define SCIF2 0xA4410000
# define SCSMR_Ir 0xA44A0000
# define IRDA_SCIF SCIF0
# define SCPCR 0xA4000116
# define SCPDR 0xA4000136
/* Set the clock source,
* SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input
* SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
*/
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
#elif defined(CONFIG_CPU_SH7720) || \
defined(CONFIG_CPU_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define PORT_PTCR 0xA405011EUL
# define PORT_PVCR 0xA4050122UL
# define SCIF_ORER 0x0200 /* overrun error bit */
#elif defined(CONFIG_SH_RTS7751R2D)
# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7750) || \
defined(CONFIG_CPU_SH7750R) || \
defined(CONFIG_CPU_SH7750S) || \
defined(CONFIG_CPU_SH7091) || \
defined(CONFIG_CPU_SH7751) || \
defined(CONFIG_CPU_SH7751R)
# define SCSPTR1 0xffe0001c /* 8 bit SCI */
# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */)
#elif defined(CONFIG_CPU_SH7760)
# define SCSPTR0 0xfe600024 /* 16 bit SCIF */
# define SCSPTR1 0xfe610024 /* 16 bit SCIF */
# define SCSPTR2 0xfe620024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7710) || defined(CONFIG_CPU_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define PACR 0xa4050100
# define PBCR 0xa4050102
# define SCSCR_INIT(port) 0x3B
#elif defined(CONFIG_CPU_SH7343)
# define SCSPTR0 0xffe00010 /* 16 bit SCIF */
# define SCSPTR1 0xffe10010 /* 16 bit SCIF */
# define SCSPTR2 0xffe20010 /* 16 bit SCIF */
# define SCSPTR3 0xffe30010 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
#elif defined(CONFIG_CPU_SH7722)
# define PADR 0xA4050120
# undef PSDR
# define PSDR 0xA405013e
# define PWDR 0xA4050166
# define PSCR 0xA405011E
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7723)
# define SCSPTR0 0xa4050160
# define SCSPTR1 0xa405013e
# define SCSPTR2 0xa4050160
# define SCSPTR3 0xa405013e
# define SCSPTR4 0xa4050128
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7724)
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \
0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */)
#elif defined(CONFIG_CPU_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH5_101) || defined(CONFIG_CPU_SH5_103)
# define SCIF_BASE_ADDR 0x01030000
# define SCIF_ADDR_SH5 (PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR)
# define SCIF_PTR2_OFFS 0x0000020
# define SCIF_LSR2_OFFS 0x0000024
# define SCSPTR\
((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
# define SCLSR2\
((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define H8300_SCI_DR(ch) (*(volatile char *)(P1DR + h8300_sci_pins[ch].port))
#elif defined(CONFIG_H8S2678)
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define H8300_SCI_DR(ch) (*(volatile char *)(P1DR + h8300_sci_pins[ch].port))
#elif defined(CONFIG_CPU_SH7757)
# define SCSPTR0 0xfe4b0020
# define SCSPTR1 0xfe4b0020
# define SCSPTR2 0xfe4b0020
# define SCIF_ORER 0x0001
# define SCSCR_INIT(port) 0x38
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SH7763)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe08024 /* 16 bit SCIF */
# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7770)
# define SCSPTR0 0xff923020 /* 16 bit SCIF */
# define SCSPTR1 0xff924020 /* 16 bit SCIF */
# define SCSPTR2 0xff925020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
#elif defined(CONFIG_CPU_SH7780)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
#if defined(CONFIG_SH_SH2007)
/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */
# define SCSCR_INIT(port) 0x38
#else
/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */
# define SCSCR_INIT(port) 0x3a
#endif
#elif defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */
# define SCSPTR2 0xffec0024 /* 16 bit SCIF */
# define SCSPTR3 0xffed0024 /* 16 bit SCIF */
# define SCSPTR4 0xffee0024 /* 16 bit SCIF */
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7201) || \
defined(CONFIG_CPU_SH7203) || \
defined(CONFIG_CPU_SH7206) || \
defined(CONFIG_CPU_SH7263)
# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
# if defined(CONFIG_CPU_SH7201)
# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */
# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */
# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
# endif
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
# define SCSPTR1 0xf8410020 /* 16 bit SCIF */
# define SCSPTR2 0xf8420020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SHX3)
# define SCSPTR0 0xffc30020 /* 16 bit SCIF */
# define SCSPTR1 0xffc40020 /* 16 bit SCIF */
# define SCSPTR2 0xffc50020 /* 16 bit SCIF */
# define SCSPTR3 0xffc60020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#else
# error CPU subtype not defined
#endif
/* SCSCR */
#define SCI_CTRL_FLAGS_TIE 0x80 /* all */
#define SCI_CTRL_FLAGS_RIE 0x40 /* all */
#define SCI_CTRL_FLAGS_TE 0x20 /* all */
#define SCI_CTRL_FLAGS_RE 0x10 /* all */
#if defined(CONFIG_CPU_SH7750) || \
defined(CONFIG_CPU_SH7091) || \
defined(CONFIG_CPU_SH7750R) || \
defined(CONFIG_CPU_SH7722) || \
defined(CONFIG_CPU_SH7750S) || \
defined(CONFIG_CPU_SH7751) || \
defined(CONFIG_CPU_SH7751R) || \
defined(CONFIG_CPU_SH7763) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786) || \
defined(CONFIG_CPU_SHX3)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#elif defined(CONFIG_CPU_SH7724)
#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8)
#else
#define SCI_CTRL_FLAGS_REIE 0
#endif
/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
/* SCI_CTRL_FLAGS_CKE1 0x02 * all */
/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */
/* SCxSR SCI */
#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER)
/* SCxSR SCIF */
#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#if defined(CONFIG_CPU_SH7705) || \
defined(CONFIG_CPU_SH7720) || \
defined(CONFIG_CPU_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
# define SCIF_ORER 0x0200
# define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
# define SCIF_RFDC_MASK 0x007f
# define SCIF_TXROOM_MAX 64
#elif defined(CONFIG_CPU_SH7763)
# define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
# define SCIF_RFDC_MASK 0x007f
# define SCIF_TXROOM_MAX 64
/* SH7763 SCIF2 support */
# define SCIF2_RFDC_MASK 0x001f
# define SCIF2_TXROOM_MAX 16
#else
# define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
# define SCIF_RFDC_MASK 0x001f
# define SCIF_TXROOM_MAX 16
#endif
#ifndef SCIF_ORER
#define SCIF_ORER 0x0000
#endif
#define SCxSR_TEND(port)\
(((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_ERRORS(port)\
(((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
#define SCxSR_RDxF(port)\
(((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
#define SCxSR_TDxE(port)\
(((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
#define SCxSR_FER(port)\
(((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
#define SCxSR_PER(port)\
(((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
#define SCxSR_BRK(port)\
((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
#define SCxSR_ORER(port)\
(((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
#if defined(CONFIG_CPU_SH7705) || \
defined(CONFIG_CPU_SH7720) || \
defined(CONFIG_CPU_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
#else
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
#endif
/* SCFCR */
#define SCFCR_RFRST 0x0002
#define SCFCR_TFRST 0x0004
#define SCFCR_TCRST 0x4000
#define SCFCR_MCE 0x0008
#define SCI_MAJOR 204
#define SCI_MINOR_START 8
/* Generic serial flags */
#define SCI_RX_THROTTLE 0x0000001
#define SCI_MAGIC 0xbabeface
/*
* Events are used to schedule things to happen at timer-interrupt
* time, instead of at rs interrupt time.
*/
#define SCI_EVENT_WRITE_WAKEUP 0
#define SCI_IN(size, offset)\
if ((size) == 8) {\
return readb(port->membase + (offset));\
} else {\
return readw(port->membase + (offset));\
}
#define SCI_OUT(size, offset, value)\
if ((size) == 8) {\
writeb(value, port->membase + (offset));\
} else if ((size) == 16) {\
writew(value, port->membase + (offset));\
}
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
static inline unsigned int sci_##name##_in(struct uart_port *port) {\
if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {\
SCI_IN(scif_size, scif_offset)\
} else { /* PORT_SCI or PORT_SCIFA */\
SCI_IN(sci_size, sci_offset);\
}\
}\
static inline void sci_##name##_out(struct uart_port *port,\
unsigned int value) {\
if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {\
SCI_OUT(scif_size, scif_offset, value)\
} else { /* PORT_SCI or PORT_SCIFA */\
SCI_OUT(sci_size, sci_offset, value);\
}\
}
#ifdef CONFIG_H8300
/* h8300 don't have SCIF */
#define CPU_SCIF_FNS(name) \
static inline unsigned int sci_##name##_in(struct uart_port *port) {\
return 0;\
}\
static inline void sci_##name##_out(struct uart_port *port,\
unsigned int value) {\
}
#else
#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
static inline unsigned int sci_##name##_in(struct uart_port *port) {\
SCI_IN(scif_size, scif_offset);\
}\
static inline void sci_##name##_out(struct uart_port *port,\
unsigned int value) {\
SCI_OUT(scif_size, scif_offset, value);\
}
#endif
#define CPU_SCI_FNS(name, sci_offset, sci_size)\
static inline unsigned int sci_##name##_in(struct uart_port *port) {\
SCI_IN(sci_size, sci_offset);\
}\
static inline void sci_##name##_out(struct uart_port *port,\
unsigned int value) {\
SCI_OUT(sci_size, sci_offset, value);\
}
#if defined(CONFIG_SH3) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
#if defined(CONFIG_CPU_SH7710) || defined(CONFIG_CPU_SH7712)
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size,\
sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size, \
sh4_scif_offset, sh4_scif_size, \
h8_sci_offset, h8_sci_size) \
CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size,\
sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size,\
sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#elif defined(CONFIG_CPU_SH7705) || \
defined(CONFIG_CPU_SH7720) || \
defined(CONFIG_CPU_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#elif defined(CONFIG_ARCH_SH7372)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size,\
sh4_scifb_offset, sh4_scifb_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size,\
sh4_scifb_offset, sh4_scifb_size)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size,\
sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size,\
sh4_scif_offset, sh4_scif_size, \
h8_sci_offset, h8_sci_size) \
CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size,\
sh3_scif_offset, sh3_scif_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size,\
sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size)
#endif
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size,\
sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size,\
sh4_scif_offset, sh4_scif_size, \
h8_sci_offset, h8_sci_size) \
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size,\
sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name)
#elif defined(CONFIG_CPU_SH7723) || defined(CONFIG_CPU_SH7724)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size,\
sh4_scif_offset, sh4_scif_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size,\
sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#else
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size,\
sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size,\
sh4_scif_offset, sh4_scif_size, \
h8_sci_offset, h8_sci_size) \
CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size,\
sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, \
sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#endif
#if defined(CONFIG_CPU_SH7705) || \
defined(CONFIG_CPU_SH7720) || \
defined(CONFIG_CPU_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
SCIF_FNS(SCSCR, 0x08, 16)
SCIF_FNS(SCTDSR, 0x0c, 8)
SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCxSR, 0x14, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_ARCH_SH7372)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
SCIF_FNS(SCSCR, 0x08, 16)
SCIF_FNS(SCTDSR, 0x0c, 16)
SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCxSR, 0x14, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCTFDR, 0x38, 16)
SCIF_FNS(SCRFDR, 0x3c, 16)
SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
SCIF_FNS(SCLSR, 0x00, 0)
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8)
SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16)
SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8)
SCIx_FNS(SCSPTR, 0, 0, 0, 0)
SCIF_FNS(SCTDSR, 0x0c, 8)
SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCLSR, 0x24, 16)
#else
/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
/* name off sz off sz off sz off sz off sz*/
SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8)
SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8)
SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8)
SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8)
SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8)
SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#elif defined(CONFIG_CPU_SH7763)
SCIF_FNS(SCFDR, 0, 0, 0x1C, 16)
SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16)
SCIF_FNS(SCLSR2, 0, 0, 0x24, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#else
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
#if defined(CONFIG_CPU_SH7722)
SCIF_FNS(SCSPTR, 0, 0, 0, 0)
#else
SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
#endif
SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
#endif
#endif
#define sci_in(port, reg) sci_##reg##_in(port)
#define sci_out(port, reg, value) sci_##reg##_out(port, value)
/* H8/300 series SCI pins assignment */
#if defined(__H8300H__) || defined(__H8300S__)
static const struct __attribute__((packed)) {
int port; /* GPIO port no */
unsigned short rx, tx; /* GPIO bit no */
} h8300_sci_pins[] = {
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
{ /* SCI0 */
.port = H8300_GPIO_P9,
.rx = H8300_GPIO_B2,
.tx = H8300_GPIO_B0,
},
{ /* SCI1 */
.port = H8300_GPIO_P9,
.rx = H8300_GPIO_B3,
.tx = H8300_GPIO_B1,
},
{ /* SCI2 */
.port = H8300_GPIO_PB,
.rx = H8300_GPIO_B7,
.tx = H8300_GPIO_B6,
}
#elif defined(CONFIG_H8S2678)
{ /* SCI0 */
.port = H8300_GPIO_P3,
.rx = H8300_GPIO_B2,
.tx = H8300_GPIO_B0,
},
{ /* SCI1 */
.port = H8300_GPIO_P3,
.rx = H8300_GPIO_B3,
.tx = H8300_GPIO_B1,
},
{ /* SCI2 */
.port = H8300_GPIO_P5,
.rx = H8300_GPIO_B1,
.tx = H8300_GPIO_B0,
}
#endif
};
#endif
#if defined(CONFIG_CPU_SH7706) || \
defined(CONFIG_CPU_SH7707) || \
defined(CONFIG_CPU_SH7708) || \
defined(CONFIG_CPU_SH7709)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfffffe80)
return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */
return 1;
}
#elif defined(CONFIG_CPU_SH7750) || \
defined(CONFIG_CPU_SH7751) || \
defined(CONFIG_CPU_SH7751R) || \
defined(CONFIG_CPU_SH7750R) || \
defined(CONFIG_CPU_SH7750S) || \
defined(CONFIG_CPU_SH7091)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
return 1;
}
#elif defined(__H8300H__) || defined(__H8300S__)
static inline int sci_rxd_in(struct uart_port *port)
{
int ch = (port->mapbase - SMR0) >> 3;
return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
}
#else /* default case for non-SCI processors */
static inline int sci_rxd_in(struct uart_port *port)
{
return 1;
}
#endif
/*
* Values for the BitRate Register (SCBRR)
*
* The values are actually divisors for a frequency which can
* be internal to the SH3 (14.7456MHz) or derived from an external
* clock source. This driver assumes the internal clock is used;
* to support using an external clock source, config options or
* possibly command-line options would need to be added.
*
* Also, to support speeds below 2400 (why?) the lower 2 bits of
* the SCSMR register would also need to be set to non-zero values.
*
* -- Greg Banks 27Feb2000
*
* Answer: The SCBRR register is only eight bits, and the value in
* it gets larger with lower baud rates. At around 2400 (depending on
* the peripherial module clock) you run out of bits. However the
* lower two bits of SCSMR allow the module clock to be divided down,
* scaling the value which is needed in SCBRR.
*
* -- Stuart Menefy - 23 May 2000
*
* I meant, why would anyone bother with bitrates below 2400.
*
* -- Greg Banks - 7Jul2000
*
* You "speedist"! How will I use my 110bps ASR-33 teletype with paper
* tape reader as a console!
*
* -- Mitch Davis - 15 Jul 2000
*/
#if (defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)) && \
!defined(CONFIG_SH_SH2007)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SH7705) || \
defined(CONFIG_CPU_SH7720) || \
defined(CONFIG_CPU_SH7721) || \
defined(CONFIG_ARCH_SH7367) || \
defined(CONFIG_ARCH_SH7377) || \
defined(CONFIG_ARCH_SH7372)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
static inline int scbrr_calc(struct uart_port port, int bps, int clk)
{
if (port.type == PORT_SCIF)
return (clk+16*bps)/(32*bps)-1;
else
return ((clk*2)+16*bps)/(16*bps)-1;
}
#define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
#else /* Generic SH */
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif

View File

@ -24,6 +24,7 @@
#define CONFIG_CMD_IDE
#define CONFIG_CMD_EXT2
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_SH_ZIMAGEBOOT
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1

View File

@ -41,6 +41,7 @@
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_SH_ZIMAGEBOOT
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE

128
include/configs/shmin.h Normal file
View File

@ -0,0 +1,128 @@
/*
* Configuation settings for shmin (T-SH7706LAN, T-SH7706LSR)
*
* Copyright (C) 2010, 2011 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __SHMIN_H
#define __SHMIN_H
#define CONFIG_SH 1
#define CONFIG_SH3 1
#define CONFIG_CPU_SH7706 1
/* T-SH7706LAN */
#define CONFIG_SHMIN 1
/* T-SH7706LSR*/
/* #define CONFIG_T_SH7706LSR 1 */
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_NFS
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SAVEENV
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTARGS "console=ttySC0,115200"
/*
* This board has original boot loader. If you write u-boot to 0x0,
* you should set undef.
*/
#define CONFIG_VERSION_VARIABLE
#undef CONFIG_SHOW_BOOT_PROGRESS
/* system */
#define SHMIN_SDRAM_BASE (0x8C000000)
#define SHMIN_FLASH_BASE_1 (0xA0000000)
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */
#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */
/* Buffer size for Boot Arguments passed to kernel */
#define CONFIG_SYS_BARGSIZE 512
/* List of legal baudrate settings for this board */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600,14400,19200,38400,57600,115200 }
/* SCIF */
#define CONFIG_SCIF_CONSOLE 1
#define CONFIG_CONS_SCIF0 1
/* memory */
#define CONFIG_SYS_SDRAM_BASE SHMIN_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START SHMIN_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - (256 * 1024))
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE (SHMIN_FLASH_BASE_1 + CONFIG_ENV_SECT_SIZE)
#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
#define CONFIG_SYS_GBL_DATA_SIZE 256
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#undef CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CONFIG_SYS_FLASH_BASE SHMIN_FLASH_BASE_1
#define CONFIG_SYS_MAX_FLASH_SECT 11
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_FLASH_CFI_LEGACY
#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_ATMEL_TOTALSECT CONFIG_SYS_MAX_FLASH_SECT
#define CONFIG_SYS_ATMEL_REGION 4
#define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7}
#define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000}
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#ifdef CONFIG_T_SH7706LSR
#define CONFIG_ENV_ADDR (SHMIN_FLASH_BASE_1 + 70000)
#else
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#endif
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
/* Board Clock */
#ifdef CONFIG_T_SH7706LSR
#define CONFIG_SYS_CLK_FREQ 40000000
#else
#define CONFIG_SYS_CLK_FREQ 33333333
#endif /* CONFIG_T_SH7706LSR */
#define CONFIG_SYS_TMU_CLK_DIV 4
#define CONFIG_SYS_HZ 1000
/* Network device */
#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_NE2000_BASE (0xb0000300)
#endif /* __SHMIN_H */