serial: Add serial driver for Intel MID

Add a specific serial driver for Intel MID platforms.

It has special fractional divider which can be programmed via UART_PS,
UART_MUL, and UART_DIV registers.

The UART clock is calculated as

	UART clock = XTAL * UART_MUL / UART_DIV

The baudrate is calculated as

	baud rate = UART clock / UART_PS / DLAB

Initialize fractional divider correctly for Intel Edison platform.

For backward compatibility we have to set initial DLAB value to 16
and speed to 115200 baud, where initial frequency is 29491200Hz, and
XTAL frequency is 38.4MHz.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Andy Shevchenko 2017-02-28 14:04:10 +02:00 committed by Bin Meng
parent ae5564d1ae
commit c5f8dd482b
3 changed files with 79 additions and 0 deletions

View File

@ -376,6 +376,15 @@ config SYS_NS16550
be used. It can be a constant or a function to get clock, eg,
get_serial_clock().
config INTEL_MID_SERIAL
bool "Intel MID platform UART support"
depends on DM_SERIAL && OF_CONTROL
depends on INTEL_MID
select SYS_NS16550
help
Select this to enable a UART for Intel MID platforms.
This uses the ns16550 driver as a library.
config ROCKCHIP_SERIAL
bool "Rockchip on-chip UART support"
depends on DM_SERIAL && SPL_OF_PLATDATA

View File

@ -28,6 +28,7 @@ obj-$(CONFIG_S5P) += serial_s5p.o
obj-$(CONFIG_MXC_UART) += serial_mxc.o
obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
obj-$(CONFIG_MESON_SERIAL) += serial_meson.o
obj-$(CONFIG_INTEL_MID_SERIAL) += serial_intel_mid.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
endif

View File

@ -0,0 +1,69 @@
/*
* Copyright (c) 2017 Intel Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <ns16550.h>
#include <serial.h>
/*
* The UART clock is calculated as
*
* UART clock = XTAL * UART_MUL / UART_DIV
*
* The baudrate is calculated as
*
* baud rate = UART clock / UART_PS / DLAB
*/
#define UART_PS 0x30
#define UART_MUL 0x34
#define UART_DIV 0x38
static void mid_writel(struct ns16550_platdata *plat, int offset, int value)
{
unsigned char *addr;
offset *= 1 << plat->reg_shift;
addr = (unsigned char *)plat->base + offset;
writel(value, addr + plat->reg_offset);
}
static int mid_serial_probe(struct udevice *dev)
{
struct ns16550_platdata *plat = dev_get_platdata(dev);
/*
* Initialize fractional divider correctly for Intel Edison
* platform.
*
* For backward compatibility we have to set initial DLAB value
* to 16 and speed to 115200 baud, where initial frequency is
* 29491200Hz, and XTAL frequency is 38.4MHz.
*/
mid_writel(plat, UART_MUL, 96);
mid_writel(plat, UART_DIV, 125);
mid_writel(plat, UART_PS, 16);
return ns16550_serial_probe(dev);
}
static const struct udevice_id mid_serial_ids[] = {
{ .compatible = "intel,mid-uart" },
{}
};
U_BOOT_DRIVER(serial_intel_mid) = {
.name = "serial_intel_mid",
.id = UCLASS_SERIAL,
.of_match = mid_serial_ids,
.ofdata_to_platdata = ns16550_serial_ofdata_to_platdata,
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
.priv_auto_alloc_size = sizeof(struct NS16550),
.probe = mid_serial_probe,
.ops = &ns16550_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};