Blackfin: unify custom gpio commands

Now that we have a unified gpio layer, the misc partial gpio commands
can be unified and made complete (support all possible gpios).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Mike Frysinger 2010-06-02 04:34:49 -04:00
parent 4638b21f2e
commit c5530555f8
14 changed files with 127 additions and 387 deletions

View File

@ -18,6 +18,7 @@ CEXTRA := initcode.o
SEXTRA := start.o
SOBJS := interrupt.o cache.o
COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o
COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
COBJS-y += cpu.o
COBJS-y += gpio.o
COBJS-y += interrupts.o

View File

@ -0,0 +1,120 @@
/*
* Control GPIO pins on the fly
*
* Copyright (c) 2008-2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <command.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
enum {
GPIO_INPUT,
GPIO_SET,
GPIO_CLEAR,
GPIO_TOGGLE,
};
int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc == 2 && !strcmp(argv[1], "status")) {
bfin_gpio_labels();
return 0;
}
if (argc != 3) {
show_usage:
printf("Usage:\n%s\n", cmdtp->usage);
return 1;
}
/* parse the behavior */
ulong sub_cmd;
switch (argv[1][0]) {
case 'i': sub_cmd = GPIO_INPUT; break;
case 's': sub_cmd = GPIO_SET; break;
case 'c': sub_cmd = GPIO_CLEAR; break;
case 't': sub_cmd = GPIO_TOGGLE; break;
default: goto show_usage;
}
/* parse the pin with format: [p][port]<#> */
const char *str_pin = argv[2];
/* grab the [p]<port> portion */
ulong port_base;
if (*str_pin == 'p') ++str_pin;
switch (*str_pin) {
#ifdef GPIO_PA0
case 'a': port_base = GPIO_PA0; break;
#endif
#ifdef GPIO_PB0
case 'b': port_base = GPIO_PB0; break;
#endif
#ifdef GPIO_PC0
case 'c': port_base = GPIO_PC0; break;
#endif
#ifdef GPIO_PD0
case 'd': port_base = GPIO_PD0; break;
#endif
#ifdef GPIO_PE0
case 'e': port_base = GPIO_PE0; break;
#endif
#ifdef GPIO_PF0
case 'f': port_base = GPIO_PF0; break;
#endif
#ifdef GPIO_PG0
case 'g': port_base = GPIO_PG0; break;
#endif
#ifdef GPIO_PH0
case 'h': port_base = GPIO_PH0; break;
#endif
#ifdef GPIO_PI0
case 'i': port_base = GPIO_PI0; break;
#endif
#ifdef GPIO_PJ
case 'j': port_base = GPIO_PJ0; break;
#endif
default: goto show_usage;
}
/* grab the <#> portion */
ulong pin = simple_strtoul(str_pin + 1, NULL, 10);
if (pin > 15)
goto show_usage;
/* grab the pin before we tweak it */
ulong gpio = port_base + pin;
gpio_request(gpio, "cmd_gpio");
/* finally, let's do it: set direction and exec command */
if (sub_cmd == GPIO_INPUT) {
gpio_direction_input(gpio);
printf("gpio: pin %lu on port %c set to input\n", pin, *str_pin);
return 0;
}
ulong value;
switch (sub_cmd) {
case GPIO_SET: value = 1; break;
case GPIO_CLEAR: value = 0; break;
case GPIO_TOGGLE: value = !gpio_get_value(gpio); break;
default: goto show_usage;
}
gpio_direction_output(gpio, value);
printf("gpio: pin %lu on port %c (gpio %lu) value is %lu\n",
pin, *str_pin, gpio, value);
gpio_free(gpio);
return 0;
}
U_BOOT_CMD(gpio, 3, 0, do_gpio,
"set/clear/toggle gpio output pins",
"<set|clear|toggle> <port><pin>\n"
" - set/clear/toggle the specified pin (e.g. PF10)");

View File

@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o cmd_bf537led.o
COBJS-y := $(BOARD).o
COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o
COBJS-$(CONFIG_POST) += post.o post-memory.o

View File

@ -1,201 +0,0 @@
/*
* U-boot - cmd_bf537led.c
*
* Copyright (C) 2006 Aaron Gage, Ocean Optics Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <asm/blackfin.h>
#include <asm/string.h>
#ifdef CONFIG_BF537_STAMP_LEDCMD
/* Define the command usage in a reusable way */
#define USAGE_LONG \
"led <number> <action>\n" \
" <number> - Index (0-5) of LED to change, or \"all\"\n" \
" <action> - Must be one of:\n" \
" on off toggle"
/* Number of LEDs supported by the board */
#define NUMBER_LEDS 6
/* The BF537 stamp has 6 LEDs. This mask indicates that all should be lit. */
#define LED_ALL_MASK 0x003F
void show_cmd_usage(void);
void set_led_state(int index, int state);
void configure_GPIO_to_output(int index);
/* Map of LEDs according to their GPIO ports. This can be rearranged or
* otherwise changed to account for different GPIO configurations.
*/
int led_ports[] = { PF6, PF7, PF8, PF9, PF10, PF11 };
#define ACTION_TOGGLE -1
#define ACTION_OFF 0
#define ACTION_ON 1
#define LED_STATE_OFF 0
#define LED_STATE_ON 1
/* This is a trivial atoi implementation since we don't have one available */
int atoi(char *string)
{
int length;
int retval = 0;
int i;
int sign = 1;
length = strlen(string);
for (i = 0; i < length; i++) {
if (0 == i && string[0] == '-') {
sign = -1;
continue;
}
if (string[i] > '9' || string[i] < '0') {
break;
}
retval *= 10;
retval += string[i] - '0';
}
retval *= sign;
return retval;
}
int do_bf537led(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
int led_mask = 0;
int led_current_state = 0;
int action = ACTION_OFF;
int temp;
if (3 != argc) {
/* Not enough arguments, so just show usage information */
show_cmd_usage();
return 1;
}
if (strcmp(argv[1], "all") == 0) {
led_mask = LED_ALL_MASK;
} else {
temp = atoi(argv[1]);
if (temp < 0 || temp >= NUMBER_LEDS) {
printf("Invalid LED number [%s]\n", argv[1]);
show_cmd_usage();
return 2;
}
led_mask |= (1 << temp);
}
if (strcmp(argv[2], "off") == 0) {
action = ACTION_OFF;
} else if (strcmp(argv[2], "on") == 0) {
action = ACTION_ON;
} else if (strcmp(argv[2], "toggle") == 0) {
action = ACTION_TOGGLE;
} else {
printf("Invalid action [%s]\n", argv[2]);
show_cmd_usage();
return 3;
}
for (temp = 0; temp < NUMBER_LEDS; temp++) {
if ((led_mask & (1 << temp)) > 0) {
/*
* It is possible that the user has wired one of PF6-PF11 to
* something other than an LED, so this will only change a pin
* to output if the user has indicated a state change. This may
* happen a lot, but this way is safer than just setting all pins
* to output.
*/
configure_GPIO_to_output(temp);
led_current_state =
((*pPORTFIO & led_ports[temp]) >
0) ? LED_STATE_ON : LED_STATE_OFF;
/*
printf("LED state for index %d (%x) is %d\n", temp, led_ports[temp],
led_current_state);
printf("*pPORTFIO is %x\n", *pPORTFIO);
*/
if (ACTION_ON == action
|| (ACTION_TOGGLE == action
&& 0 == led_current_state)) {
printf("Turning LED %d on\n", temp);
set_led_state(temp, LED_STATE_ON);
} else {
printf("Turning LED %d off\n", temp);
set_led_state(temp, LED_STATE_OFF);
}
}
}
return 0;
}
/*
* The GPIO pins that go to the LEDs on the BF537 stamp must be configured
* as output. This function simply configures them that way. This could
* be done to all of the GPIO lines at once, but if a user is using a
* custom board, this will try to be nice and only change the GPIO lines
* that the user specifically names.
*/
void configure_GPIO_to_output(int index)
{
int port;
port = led_ports[index];
/* Clear the Port F Function Enable Register */
*pPORTF_FER &= ~port;
/* Set the Port F I/O direction register */
*pPORTFIO_DIR |= port;
/* Clear the Port F I/O Input Enable Register */
*pPORTFIO_INEN &= ~port;
}
/* Enforce the given state on the GPIO line for the indicated LED */
void set_led_state(int index, int state)
{
int port;
port = led_ports[index];
if (LED_STATE_OFF == state) {
/* Clear the bit to turn off the LED */
*pPORTFIO &= ~port;
} else {
/* Set the bit to turn on the LED */
*pPORTFIO |= port;
}
}
/* Display usage information */
void show_cmd_usage()
{
printf("Usage:\n%s\n", USAGE_LONG);
}
/* Register information for u-boot to find this command */
U_BOOT_CMD(led, 3, 1, do_bf537led,
"Control BF537 stamp LEDs", USAGE_LONG);
#endif

View File

@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o gpio.o gpio_cfi_flash.o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))

View File

@ -1,74 +0,0 @@
/*
* Control GPIO pins on the fly
*
* Copyright (c) 2008 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <command.h>
#include <asm/blackfin.h>
int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc != 3) {
show_usage:
printf("Usage:\n%s\n", cmdtp->usage);
return 1;
}
/* parse the behavior */
ulong port_cmd = 0;
switch (argv[1][0]) {
case 'i': break;
case 's': port_cmd = (PORTFIO_SET - PORTFIO); break;
case 'c': port_cmd = (PORTFIO_CLEAR - PORTFIO); break;
case 't': port_cmd = (PORTFIO_TOGGLE - PORTFIO); break;
default: goto show_usage;
}
/* parse the pin with format: [p]<fgh><#> */
const char *str_pin = argv[2];
/* grab the [p]<fgh> portion */
ulong port_base;
if (*str_pin == 'p') ++str_pin;
switch (*str_pin) {
case 'f': port_base = PORTFIO; break;
case 'g': port_base = PORTGIO; break;
case 'h': port_base = PORTHIO; break;
default: goto show_usage;
}
/* grab the <#> portion */
ulong pin = simple_strtoul(str_pin+1, NULL, 10);
ulong pin_mask = (1 << pin);
if (pin > 15)
goto show_usage;
/* finally, let's do it: set direction and exec command */
switch (*str_pin) {
case 'f': bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~pin_mask); break;
case 'g': bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~pin_mask); break;
case 'h': bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~pin_mask); break;
}
ulong port_dir = port_base + (PORTFIO_DIR - PORTFIO);
if (argv[1][0] == 'i')
bfin_write16(port_dir, bfin_read16(port_dir) & ~pin_mask);
else {
bfin_write16(port_dir, bfin_read16(port_dir) | pin_mask);
bfin_write16(port_base + port_cmd, pin_mask);
}
printf("gpio: pin %li on port %c has been %c\n", pin, *str_pin, argv[1][0]);
return 0;
}
U_BOOT_CMD(gpio, 3, 0, do_gpio,
"gpio - set/clear/toggle gpio output pins\n",
"<s|c|t> <port><pin>\n"
" - set/clear/toggle the specified pin\n");

View File

@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))

View File

@ -1,34 +0,0 @@
/*
* flash.c - helper commands for working with GPIO-assisted flash
*
* Copyright (c) 2005-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <command.h>
#include <asm/blackfin.h>
#include "gpio_cfi_flash.h"
int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong faddr = CONFIG_SYS_FLASH_BASE;
ushort data;
ulong dflg;
if (argc > 1) {
dflg = simple_strtoul(argv[1], NULL, 16);
faddr |= (dflg << 21);
gpio_cfi_flash_swizzle((void *)faddr);
} else {
data = bfin_read_PORTFIO();
printf("Port F data %04x (PF4:%i)\n", data, !!(data & PF4));
}
return 0;
}
U_BOOT_CMD(pf, 3, 0, do_pf,
"set/clear PF4 GPIO flash bank switch\n",
"<pf4> - set PF4 GPIO pin state\n");

View File

@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))

View File

@ -1,34 +0,0 @@
/*
* flash.c - helper commands for working with GPIO-assisted flash
*
* Copyright (c) 2005-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <command.h>
#include <asm/blackfin.h>
#include "gpio_cfi_flash.h"
int do_ph(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong faddr = CONFIG_SYS_FLASH_BASE;
ushort data;
ulong dflg;
if (argc > 1) {
dflg = simple_strtoul(argv[1], NULL, 16);
faddr |= (dflg << 21);
gpio_cfi_flash_swizzle((void *)faddr);
} else {
data = bfin_read_PORTHIO();
printf("Port H data %04x (PH0:%i)\n", data, !!(data & PH0));
}
return 0;
}
U_BOOT_CMD(ph, 3, 0, do_ph,
"set/clear PH0 GPIO flash bank switch\n",
"<ph0> - set PH0 GPIO pin state\n");

View File

@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o
COBJS-y := $(BOARD).o gpio_cfi_flash.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))

View File

@ -1,37 +0,0 @@
/*
* flash.c - helper commands for working with GPIO-assisted flash
*
* Copyright (c) 2005-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <command.h>
#include <asm/blackfin.h>
#include "gpio_cfi_flash.h"
int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong faddr = CONFIG_SYS_FLASH_BASE;
ushort data;
ulong dflg;
if (argc == 3) {
dflg = simple_strtoul(argv[1], NULL, 16);
faddr |= (dflg << 21);
dflg = simple_strtoul(argv[2], NULL, 16);
faddr |= (dflg << 22);
gpio_cfi_flash_swizzle((void *)faddr);
} else {
data = bfin_read_PORTFIO();
printf("Port F data %04x (PF4:%i PF5:%i)\n", data,
!!(data & PF4), !!(data & PF5));
}
return 0;
}
U_BOOT_CMD(pf, 3, 0, do_pf,
"set/clear PF4/PF5 GPIO flash bank switch\n",
"<pf4> <pf5> - set PF4/PF5 GPIO pin state\n");

View File

@ -268,8 +268,6 @@
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 0
/* #define CONFIG_BF537_STAMP_LEDCMD 1 */
/* Define if want to do post memory test */
#undef CONFIG_POST
#ifdef CONFIG_POST

View File

@ -83,6 +83,7 @@
# define CONFIG_CMD_CPLBINFO
# define CONFIG_CMD_ELF
# define CONFIG_ELF_SIMPLE_LOAD
# define CONFIG_CMD_GPIO
# define CONFIG_CMD_KGDB
# define CONFIG_CMD_REGINFO
# define CONFIG_CMD_STRINGS