diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
index 15ae21c03c..35866e096a 100644
--- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c
+++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
@@ -38,29 +38,62 @@ static int setup_fec(void)
 
 int board_phy_config(struct phy_device *phydev)
 {
-	/*
-	 * The PHY adds 1.2ns for the RXC and 0ns for TXC clock by
-	 * default. The MAC and the layout don't add a skew between
-	 * clock and data.
-	 * Add 0.3ns for the RXC path and 0.96 + 0.42 ns (1.38 ns) for
-	 * the TXC path to get the required clock skews.
-	 */
-	/* control data pad skew - devaddr = 0x02, register = 0x04 */
-	ksz9031_phy_extended_write(phydev, 0x02,
-				MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
-				MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0070);
-	/* rx data pad skew - devaddr = 0x02, register = 0x05 */
-	ksz9031_phy_extended_write(phydev, 0x02,
-				MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
-				MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x7777);
-	/* tx data pad skew - devaddr = 0x02, register = 0x06 */
-	ksz9031_phy_extended_write(phydev, 0x02,
-				MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
-				MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
-	/* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
-	ksz9031_phy_extended_write(phydev, 0x02,
-				MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
-				MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03f4);
+	int tmp;
+
+	switch (ksz9xx1_phy_get_id(phydev) & MII_KSZ9x31_SILICON_REV_MASK) {
+	case PHY_ID_KSZ9031:
+		/*
+		 * The PHY adds 1.2ns for the RXC and 0ns for TXC clock by
+		 * default. The MAC and the layout don't add a skew between
+		 * clock and data.
+		 * Add 0.3ns for the RXC path and 0.96 + 0.42 ns (1.38 ns) for
+		 * the TXC path to get the required clock skews.
+		 */
+		/* control data pad skew - devaddr = 0x02, register = 0x04 */
+		ksz9031_phy_extended_write(phydev, 0x02,
+					   MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
+					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
+					   0x0070);
+		/* rx data pad skew - devaddr = 0x02, register = 0x05 */
+		ksz9031_phy_extended_write(phydev, 0x02,
+					   MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
+					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
+					   0x7777);
+		/* tx data pad skew - devaddr = 0x02, register = 0x06 */
+		ksz9031_phy_extended_write(phydev, 0x02,
+					   MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
+					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
+					   0x0000);
+		/* gtx and rx clock pad skew - devaddr = 0x02,register = 0x08 */
+		ksz9031_phy_extended_write(phydev, 0x02,
+					   MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
+					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
+					   0x03f4);
+		break;
+	case PHY_ID_KSZ9131:
+	default:
+		/* read rxc dll control - devaddr = 0x2, register = 0x4c */
+		tmp = ksz9031_phy_extended_read(phydev, 0x02,
+					MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
+					MII_KSZ9031_MOD_DATA_NO_POST_INC);
+		/* disable rxdll bypass (enable 2ns skew delay on RXC) */
+		tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
+		/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4c */
+		tmp = ksz9031_phy_extended_write(phydev, 0x02,
+					MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
+					MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
+		/* read txc dll control - devaddr = 0x02, register = 0x4d */
+		tmp = ksz9031_phy_extended_read(phydev, 0x02,
+					MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
+					MII_KSZ9031_MOD_DATA_NO_POST_INC);
+		/* disable txdll bypass (enable 2ns skew delay on TXC) */
+		tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
+		/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4d */
+		tmp = ksz9031_phy_extended_write(phydev, 0x02,
+					MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
+					MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
+		break;
+	}
 
 	if (phydev->drv->config)
 		phydev->drv->config(phydev);