arm64: zynqmp: Use zynqmp_virt platform

Decrease amount of the similar defconfigs and use generic one instead.
The change was declared by commit 4b37c13dc3
("arm64: zynqmp: Introduce virtual defconfig") and this patch removes
configs for the most of the boards.
Utra96/zcu100/zcu102/zcu102 and ZynqMP based System controllers *a2197*.
have been also boot tested to make sure that funcionality
remains the same.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

configs/avnet_ultra96_rev1_defconfig

@@ -1,90 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff010000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_BOOTMENU=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="avnet-ultra96-rev1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-# CONFIG_NETDEVICES is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQ_SPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_ETHER=y
-CONFIG_USB_ETH_CDC=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_WDT=y
-CONFIG_WDT_CDNS=y
-CONFIG_SPL_GZIP=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_a2197_revA_defconfig

@@ -1,113 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA"
-CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-g-a2197-00-revA zynqmp-p-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_e_a2197_00_revA_defconfig

@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-e-a2197-00-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_g_a2197_00_revA_defconfig

@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-g-a2197-00-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_m_a2197_01_revA_defconfig

@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-01-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_m_a2197_02_revA_defconfig

@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-02-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_m_a2197_03_revA_defconfig

@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-m-a2197-03-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_p_a2197_00_revA_defconfig

@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal"
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-p-a2197-00-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_virt_defconfig

@@ -45,6 +45,8 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
+CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu216-revA"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y

configs/xilinx_zynqmp_zc1232_revA_defconfig

@@ -1,50 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1232-revA"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zc1254_revA_defconfig

@@ -1,50 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1254-revA"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig

@@ -1,95 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_HS200_SUPPORT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig

@@ -1,88 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm016-dc2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_DM_MMC=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_ARASAN=y
-CONFIG_SYS_NAND_MAX_CHIPS=2
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig

@@ -1,83 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff010000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm017-dc3"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_ARASAN=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig

@@ -1,68 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm018-dc4"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y

configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig

@@ -1,61 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu100_revC_defconfig

@@ -1,87 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff010000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_BOOTMENU=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_POWEROFF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-# CONFIG_NETDEVICES is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQ_SPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_ETHER=y
-CONFIG_USB_ETH_CDC=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_SPL_GZIP=y
-CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu102_rev1_0_defconfig

@@ -1,112 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-rev1.0"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_GPIO_HOG=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu102_revA_defconfig

@@ -1,112 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_GPIO_HOG=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_SPL_GZIP=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu102_revB_defconfig

@@ -1,111 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_GPIO_HOG=y
-CONFIG_XILINX_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu104_revA_defconfig

@@ -1,92 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu104-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu104_revC_defconfig

@@ -1,96 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu104-revC"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu106_revA_defconfig

@@ -1,105 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu106-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu111_revA_defconfig

@@ -1,94 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu111-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu1275_revA_defconfig

@@ -1,50 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu1275-revA"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu1275_revB_defconfig

@@ -1,59 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FS_FAT is not set
-# CONFIG_SPL_LIBDISK_SUPPORT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu1275-revB"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_MISC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_PHY_XILINX_GMII2RGMII=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y

configs/xilinx_zynqmp_zcu216_revA_defconfig

@@ -1,95 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
-CONFIG_SPL_ATF=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BIND=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_FPGA_LOAD_SECURE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu216-revA"
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_CLK_ZYNQMP=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SF_DUAL_FLASH=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_FIXED=y
-CONFIG_PHY_GIGE=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_SPI=y
-CONFIG_ZYNQMP_GQSPI=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y