davinci: ea20: reorganisation LCD startup

Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: Tom Rini <trini@ti.com>
Acked-by: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Bastian Ruppert 2012-09-13 22:28:59 +00:00 committed by Tom Rini
parent b72db2080b
commit bdb04abe42

View File

@ -176,6 +176,9 @@ int board_early_init_f(void)
if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0)
return 1;
/* Set DISP_ON high to enable LCD output*/
gpio_direction_output(97, 1);
/* Set the RESETOUTn low */
gpio_direction_output(111, 0);
@ -188,9 +191,6 @@ int board_early_init_f(void)
/* Set LCD_B_PWR low to power down LCD Backlight*/
gpio_direction_output(102, 0);
/* Set DISP_ON low to disable LCD output*/
gpio_direction_output(97, 0);
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
@ -250,11 +250,6 @@ int board_early_init_f(void)
writel(readl(&davinci_syscfg_regs->mstpri[2]) & 0x0fffffff,
&davinci_syscfg_regs->mstpri[2]);
/* Set LCD_B_PWR low to power up LCD Backlight*/
gpio_set_value(102, 1);
/* Set DISP_ON low to disable LCD output*/
gpio_set_value(97, 1);
return 0;
}
@ -276,6 +271,9 @@ int board_init(void)
int board_late_init(void)
{
unsigned char buf[2];
int ret;
/* PinMux for HALTEN */
if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0)
return 1;
@ -285,6 +283,15 @@ int board_late_init(void)
setenv("stdout", "serial");
/* Set fixed contrast settings for LCD via I2C potentiometer */
buf[0] = 0x00;
buf[1] = 0xd7;
ret = i2c_write(0x2e, 6, 1, buf, 2);
if (ret)
puts("\nContrast Settings FAILED\n");
/* Set LCD_B_PWR high to power up LCD Backlight*/
gpio_set_value(102, 1);
return 0;
}
#endif /* CONFIG_BOARD_LATE_INIT */