mmc: Fix splitting device initialization

Starting part of device initialization sets the init_in_progress flag
only if the MMC card did not yet come to ready state and needs to continue
polling. If the card is SD or if the MMC card became ready quickly,
the flag is not set and (if using pre-initialization) the starting
phase will be re-executed from mmc_init function.

Set the init_in_progress flag in all non-error cases. Also, move flags
setting statements around so that the flags are not set in error paths.
Also, IN_PROGRESS return status becomes unnecessary, so get rid of it.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
This commit is contained in:
Andrew Gabbasov 2015-03-19 07:44:07 -05:00 committed by Pantelis Antoniou
parent 1677eef459
commit bd47c13583
2 changed files with 9 additions and 10 deletions

View File

@ -387,7 +387,6 @@ static int mmc_send_op_cond(struct mmc *mmc)
mmc_go_idle(mmc);
/* Asking to the card its capabilities */
mmc->op_cond_pending = 1;
for (i = 0; i < 2; i++) {
err = mmc_send_op_cond_iter(mmc, i != 0);
if (err)
@ -395,9 +394,10 @@ static int mmc_send_op_cond(struct mmc *mmc)
/* exit if not busy (flag seems to be inverted) */
if (mmc->ocr & OCR_BUSY)
return 0;
break;
}
return IN_PROGRESS;
mmc->op_cond_pending = 1;
return 0;
}
static int mmc_complete_op_cond(struct mmc *mmc)
@ -1627,7 +1627,7 @@ int mmc_start_init(struct mmc *mmc)
if (err == TIMEOUT) {
err = mmc_send_op_cond(mmc);
if (err && err != IN_PROGRESS) {
if (err) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
printf("Card did not respond to voltage select!\n");
#endif
@ -1635,7 +1635,7 @@ int mmc_start_init(struct mmc *mmc)
}
}
if (err == IN_PROGRESS)
if (!err)
mmc->init_in_progress = 1;
return err;
@ -1645,6 +1645,7 @@ static int mmc_complete_init(struct mmc *mmc)
{
int err = 0;
mmc->init_in_progress = 0;
if (mmc->op_cond_pending)
err = mmc_complete_op_cond(mmc);
@ -1654,13 +1655,12 @@ static int mmc_complete_init(struct mmc *mmc)
mmc->has_init = 0;
else
mmc->has_init = 1;
mmc->init_in_progress = 0;
return err;
}
int mmc_init(struct mmc *mmc)
{
int err = IN_PROGRESS;
int err = 0;
unsigned start;
if (mmc->has_init)
@ -1671,7 +1671,7 @@ int mmc_init(struct mmc *mmc)
if (!mmc->init_in_progress)
err = mmc_start_init(mmc);
if (!err || err == IN_PROGRESS)
if (!err)
err = mmc_complete_init(mmc);
debug("%s: %d, time %lu\n", __func__, err, get_timer(start));
return err;

View File

@ -70,8 +70,7 @@
#define UNUSABLE_ERR -17 /* Unusable Card */
#define COMM_ERR -18 /* Communications Error */
#define TIMEOUT -19
#define IN_PROGRESS -20 /* operation is in progress */
#define SWITCH_ERR -21 /* Card reports failure to switch mode */
#define SWITCH_ERR -20 /* Card reports failure to switch mode */
#define MMC_CMD_GO_IDLE_STATE 0
#define MMC_CMD_SEND_OP_COND 1