dm: Add support for scsi/sata based devices

All sata based drivers are bind and corresponding block
device is created. Based on this find_scsi_device() is able
to get back block device based on scsi_curr_dev pointer.

intr_scsi() is commented now but it can be replaced by calling
find_scsi_device() and scsi_scan().

scsi_dev_desc[] is commented out but common/scsi.c heavily depends on
it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol
is reassigned to a block description allocated by uclass.
There is only one block description by device now but it doesn't need to
be correct when more devices are present.

scsi_bind() ensures corresponding block device creation.
uclass post_probe (scsi_post_probe()) is doing low level init.

SCSI/SATA DM based drivers requires to have 64bit base address as
the first entry in platform data structure to setup mmio_base.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Series-changes: 2
- Use CONFIG_DM_SCSI instead of mix of DM_SCSI and DM_SATA
  Ceva sata has never used sata commands that's why keep it in
  SCSI part only.
- Separate scsi_scan() for DM_SCSI and do not change cmd/scsi.c
- Extend platdata

Series-changes: 3
- Fix scsi_scan return path
- Fix header location uclass-internal.h
- Add scsi_max_devs under !DM_SCSI
- Add new header device-internal because of device_probe()
- Redesign block device creation algorithm
- Use device_unbind in error path
- Create block device with id and lun numbers (lun was there in v2)
- Cleanup dev_num initialization in block device description
  with fixing parameters in blk_create_devicef
- Create new Kconfig menu for SATA/SCSI drivers
- Extend description for DM_SCSI
- Fix Kconfig dependencies
- Fix kernel doc format in scsi_platdata
- Fix ahci_init_one - vendor variable

Series-changes: 4
- Fix Kconfig entry
- Remove SPL ifdef around SCSI uclass
- Clean ahci_print_info() ifdef logic
This commit is contained in:
Michal Simek 2016-09-08 15:06:45 +02:00
parent 3cfb67d041
commit bce4d18c9d
11 changed files with 165 additions and 13 deletions

View File

@ -620,7 +620,7 @@ static int initr_ambapp_print(void)
}
#endif
#if defined(CONFIG_SCSI)
#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
static int initr_scsi(void)
{
puts("SCSI: ");
@ -923,7 +923,7 @@ init_fnc_t init_sequence_r[] = {
initr_ambapp_print,
#endif
#endif
#ifdef CONFIG_SCSI
#if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
INIT_FUNC_WATCHDOG_RESET
initr_scsi,
#endif

View File

@ -10,7 +10,10 @@
#include <inttypes.h>
#include <pci.h>
#include <scsi.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
#if !defined(CONFIG_DM_SCSI)
#ifdef CONFIG_SCSI_DEV_LIST
#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
#else
@ -31,6 +34,7 @@
#endif
#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
#endif
#endif
#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
@ -39,11 +43,13 @@ static ccb tempccb; /* temporary scsi command buffer */
static unsigned char tempbuff[512]; /* temporary data buffer */
#if !defined(CONFIG_DM_SCSI)
static int scsi_max_devs; /* number of highest available scsi device */
static int scsi_curr_dev; /* current device */
static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
#endif
/* almost the maximum amount of the scsi_ext command.. */
#define SCSI_MAX_READ_BLK 0xFFFF
@ -444,6 +450,7 @@ static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc)
#endif
}
#if !defined(CONFIG_DM_SCSI)
/**
* scsi_init_dev_desc - initialize all SCSI specific blk_desc properties
*
@ -460,6 +467,7 @@ static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum)
scsi_init_dev_desc_priv(dev_desc);
}
#endif
/**
* scsi_detect_dev - Detect scsi device
@ -540,6 +548,73 @@ removable:
* (re)-scan the scsi bus and reports scsi device info
* to the user if mode = 1
*/
#if defined(CONFIG_DM_SCSI)
int scsi_scan(int mode)
{
unsigned char i, lun;
struct uclass *uc;
struct udevice *dev; /* SCSI controller */
int ret;
if (mode == 1)
printf("scanning bus for devices...\n");
ret = uclass_get(UCLASS_SCSI, &uc);
if (ret)
return ret;
uclass_foreach_dev(dev, uc) {
struct scsi_platdata *plat; /* scsi controller platdata */
/* probe SCSI controller driver */
ret = device_probe(dev);
if (ret)
return ret;
/* Get controller platdata */
plat = dev_get_platdata(dev);
for (i = 0; i < plat->max_id; i++) {
for (lun = 0; lun < plat->max_lun; lun++) {
struct udevice *bdev; /* block device */
/* block device description */
struct blk_desc *bdesc;
char str[10];
/*
* Create only one block device and do detection
* to make sure that there won't be a lot of
* block devices created
*/
snprintf(str, sizeof(str), "id%dlun%d", i, lun);
ret = blk_create_devicef(dev, "scsi_blk",
str, IF_TYPE_SCSI,
-1, 0, 0, &bdev);
if (ret) {
debug("Can't create device\n");
return ret;
}
bdesc = dev_get_uclass_platdata(bdev);
scsi_init_dev_desc_priv(bdesc);
bdesc->lun = lun;
ret = scsi_detect_dev(i, bdesc);
if (ret) {
device_unbind(bdev);
continue;
}
if (mode == 1) {
printf(" Device %d: ", 0);
dev_print(bdesc);
} /* if mode */
} /* next LUN */
}
}
return 0;
}
#else
int scsi_scan(int mode)
{
unsigned char i, lun;
@ -576,6 +651,7 @@ int scsi_scan(int mode)
#endif
return 0;
}
#endif
#ifdef CONFIG_BLK
static const struct blk_ops scsi_blk_ops = {

View File

@ -19,6 +19,15 @@ config AHCI
operations at present. The block device interface has not been converted
to driver model.
config DM_SCSI
bool "Support SCSI controllers with driver model"
depends on BLK
help
This option enables the SCSI (Small Computer System Interface) uclass
which supports SCSI and SATA HDDs. For every device configuration
(IDs/LUNs) a block device is created with RAW read/write and
filesystem support.
config BLOCK_CACHE
bool "Use block device cache"
default n
@ -27,3 +36,7 @@ config BLOCK_CACHE
This is most useful when accessing filesystems under U-Boot since
it will prevent repeated reads from directory structures and other
filesystem data structures.
menu "SATA/SCSI device support"
endmenu

View File

@ -12,6 +12,7 @@ obj-y += blk_legacy.o
endif
obj-$(CONFIG_AHCI) += ahci-uclass.o
obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
obj-$(CONFIG_SCSI_AHCI) += ahci.o
obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
obj-$(CONFIG_FSL_SATA) += fsl_sata.o

View File

@ -168,7 +168,7 @@ int ahci_reset(void __iomem *base)
static int ahci_host_init(struct ahci_probe_ent *probe_ent)
{
#ifndef CONFIG_SCSI_AHCI_PLAT
#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
# ifdef CONFIG_DM_PCI
struct udevice *dev = probe_ent->dev;
struct pci_child_platdata *pplat = dev_get_parent_platdata(dev);
@ -198,7 +198,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
writel(cap_save, mmio + HOST_CAP);
writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
#ifndef CONFIG_SCSI_AHCI_PLAT
#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
# ifdef CONFIG_DM_PCI
if (pplat->vendor == PCI_VENDOR_ID_INTEL) {
u16 tmp16;
@ -327,6 +327,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
tmp = readl(mmio + HOST_CTL);
debug("HOST_CTL 0x%x\n", tmp);
#if !defined(CONFIG_DM_SCSI)
#ifndef CONFIG_SCSI_AHCI_PLAT
# ifdef CONFIG_DM_PCI
dm_pci_read_config16(dev, PCI_COMMAND, &tmp16);
@ -337,6 +338,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
tmp |= PCI_COMMAND_MASTER;
pci_write_config_word(pdev, PCI_COMMAND, tmp16);
# endif
#endif
#endif
return 0;
}
@ -344,8 +346,8 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
static void ahci_print_info(struct ahci_probe_ent *probe_ent)
{
#ifndef CONFIG_SCSI_AHCI_PLAT
# ifdef CONFIG_DM_PCI
#if !defined(CONFIG_SCSI_AHCI_PLAT) && !defined(CONFIG_DM_SCSI)
# if defined(CONFIG_DM_PCI)
struct udevice *dev = probe_ent->dev;
# else
pci_dev_t pdev = probe_ent->dev;
@ -372,7 +374,7 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
else
speed_s = "?";
#ifdef CONFIG_SCSI_AHCI_PLAT
#if defined(CONFIG_SCSI_AHCI_PLAT) || defined(CONFIG_DM_SCSI)
scc_s = "SATA";
#else
# ifdef CONFIG_DM_PCI
@ -424,13 +426,15 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
}
#ifndef CONFIG_SCSI_AHCI_PLAT
# ifdef CONFIG_DM_PCI
# if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
static int ahci_init_one(struct udevice *dev)
# else
static int ahci_init_one(pci_dev_t dev)
# endif
{
#if !defined(CONFIG_DM_SCSI)
u16 vendor;
#endif
int rc;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
@ -450,6 +454,7 @@ static int ahci_init_one(pci_dev_t dev)
probe_ent->pio_mask = 0x1f;
probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
#if !defined(CONFIG_DM_SCSI)
#ifdef CONFIG_DM_PCI
probe_ent->mmio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_5,
PCI_REGION_MEM);
@ -473,6 +478,10 @@ static int ahci_init_one(pci_dev_t dev)
if (vendor == 0x197b)
pci_write_config_byte(dev, 0x41, 0xa1);
#endif
#else
struct scsi_platdata *plat = dev_get_platdata(dev);
probe_ent->mmio_base = (void *)plat->base;
#endif
debug("ahci mmio_base=0x%p\n", probe_ent->mmio_base);
/* initialize adapter */
@ -954,14 +963,17 @@ int scsi_exec(ccb *pccb)
}
#if defined(CONFIG_DM_SCSI)
void scsi_low_level_init(int busdevfunc, struct udevice *dev)
#else
void scsi_low_level_init(int busdevfunc)
#endif
{
int i;
u32 linkmap;
#ifndef CONFIG_SCSI_AHCI_PLAT
# ifdef CONFIG_DM_PCI
# if defined(CONFIG_DM_PCI)
struct udevice *dev;
int ret;
@ -969,6 +981,8 @@ void scsi_low_level_init(int busdevfunc)
if (ret)
return;
ahci_init_one(dev);
# elif defined(CONFIG_DM_SCSI)
ahci_init_one(dev);
# else
ahci_init_one(busdevfunc);
# endif

View File

@ -26,7 +26,7 @@ static const char *if_typename_str[IF_TYPE_COUNT] = {
static enum uclass_id if_type_uclass_id[IF_TYPE_COUNT] = {
[IF_TYPE_IDE] = UCLASS_INVALID,
[IF_TYPE_SCSI] = UCLASS_INVALID,
[IF_TYPE_SCSI] = UCLASS_SCSI,
[IF_TYPE_ATAPI] = UCLASS_INVALID,
[IF_TYPE_USB] = UCLASS_MASS_STORAGE,
[IF_TYPE_DOC] = UCLASS_INVALID,

View File

@ -0,0 +1,27 @@
/*
* Copyright (c) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
* Copyright (c) 2016 Xilinx, Inc
* Written by Michal Simek
*
* Based on ahci-uclass.c
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <scsi.h>
static int scsi_post_probe(struct udevice *dev)
{
debug("%s: device %p\n", __func__, dev);
scsi_low_level_init(0, dev);
return 0;
}
UCLASS_DRIVER(scsi) = {
.id = UCLASS_SCSI,
.name = "scsi",
.post_probe = scsi_post_probe,
};

View File

@ -145,7 +145,7 @@ struct ahci_ioports {
};
struct ahci_probe_ent {
#ifdef CONFIG_DM_PCI
#if defined(CONFIG_DM_PCI) || defined(CONFIG_DM_SCSI)
struct udevice *dev;
#else
pci_dev_t dev;

View File

@ -66,6 +66,7 @@ enum uclass_id {
UCLASS_REMOTEPROC, /* Remote Processor device */
UCLASS_RESET, /* Reset controller device */
UCLASS_RTC, /* Real time clock device */
UCLASS_SCSI, /* SCSI device */
UCLASS_SERIAL, /* Serial UART */
UCLASS_SPI, /* SPI bus */
UCLASS_SPMI, /* System Power Management Interface bus */

View File

@ -2,6 +2,7 @@
#define __SATA_H__
#include <part.h>
#if !defined(CONFIG_DM_SCSI)
int init_sata(int dev);
int reset_sata(int dev);
int scan_sata(int dev);
@ -15,5 +16,6 @@ int __sata_stop(void);
int sata_port_status(int dev, int port);
extern struct blk_desc sata_dev_desc[];
#endif
#endif

View File

@ -166,8 +166,11 @@ typedef struct SCSI_cmd_block{
void scsi_print_error(ccb *pccb);
int scsi_exec(ccb *pccb);
void scsi_bus_reset(void);
#if !defined(CONFIG_DM_SCSI)
void scsi_low_level_init(int busdevfunc);
#else
void scsi_low_level_init(int busdevfunc, struct udevice *dev);
#endif
/***************************************************************************
* functions residing inside cmd_scsi.c
@ -175,6 +178,21 @@ void scsi_low_level_init(int busdevfunc);
void scsi_init(void);
int scsi_scan(int mode);
#if defined(CONFIG_DM_SCSI)
/**
* struct scsi_platdata - stores information about SCSI controller
*
* @base: Controller base address
* @max_lun: Maximum number of logical units
* @max_id: Maximum number of target ids
*/
struct scsi_platdata {
unsigned long base;
unsigned long max_lun;
unsigned long max_id;
};
#endif
#define SCSI_IDENTIFY 0xC0 /* not used */
/* Hardware errors */