net/fm: Add QSGMII PCS init

QSGMII PCS needed to be programmed same as SGMII PCS, and there are
four ports in QSGMII PCS, port 0, 1, 2, 3, all the four ports shared
port 0's MDIO controller, so when programming port 0, we continue to
program other three ports.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
This commit is contained in:
Shaohui Xie 2015-10-26 19:47:48 +08:00 committed by York Sun
parent 8225b2fd87
commit bc24611ca1

View File

@ -41,28 +41,35 @@ static void dtsec_configure_serdes(struct fm_eth *priv)
bus.priv = priv->mac->phyregs;
bool sgmii_2500 = (priv->enet_if ==
PHY_INTERFACE_MODE_SGMII_2500) ? true : false;
int i = 0;
qsgmii_loop:
/* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */
value = PHY_SGMII_IF_MODE_SGMII;
if (!sgmii_2500)
value |= PHY_SGMII_IF_MODE_AN;
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x14, value);
/* Dev ability according to SGMII specification */
value = PHY_SGMII_DEV_ABILITY_SGMII;
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value);
memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x4, value);
/* Adjust link timer for SGMII -
1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3);
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x13, 0x3);
memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0x12, 0xd40);
/* Restart AN */
value = PHY_SGMII_CR_DEF_VAL;
if (!sgmii_2500)
value |= PHY_SGMII_CR_RESET_AN;
memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
memac_mdio_write(&bus, i, MDIO_DEVAD_NONE, 0, value);
if ((priv->enet_if == PHY_INTERFACE_MODE_QSGMII) && (i < 3)) {
i++;
goto qsgmii_loop;
}
#else
struct dtsec *regs = priv->mac->base;
struct tsec_mii_mng *phyregs = priv->mac->phyregs;
@ -91,6 +98,7 @@ static void dtsec_init_phy(struct eth_device *dev)
#endif
if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII ||
fm_eth->enet_if == PHY_INTERFACE_MODE_QSGMII ||
fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII_2500)
dtsec_configure_serdes(fm_eth);
}