video: seps525: Add seps525 SPI driver

Add support for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
using the SEPS525 (Syncoam) LCD Controller. Syncoam Seps525 PM-Oled is RGB
160x128 display. This driver has been tested through zynq-spi driver.

ZynqMP> load mmc 1 100000 rainbow.bmp
61562 bytes read in 20 ms (2.9 MiB/s)
ZynqMP> bmp info 100000
Image size    : 160 x 128
Bits per pixel: 24
Compression   : 0
ZynqMP> bmp display 100000
ZynqMP> setenv stdout vidconsole

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Michal Simek 2020-12-03 09:31:35 +01:00
parent 1ac1a04b9e
commit b66d7af41f
4 changed files with 336 additions and 0 deletions

View File

@ -590,6 +590,7 @@ F: drivers/spi/zynq_qspi.c
F: drivers/spi/zynq_spi.c F: drivers/spi/zynq_spi.c
F: drivers/timer/cadence-ttc.c F: drivers/timer/cadence-ttc.c
F: drivers/usb/host/ehci-zynq.c F: drivers/usb/host/ehci-zynq.c
F: drivers/video/seps525.c
F: drivers/watchdog/cdns_wdt.c F: drivers/watchdog/cdns_wdt.c
F: include/zynqmppl.h F: include/zynqmppl.h
F: include/zynqmp_firmware.h F: include/zynqmp_firmware.h

View File

@ -652,6 +652,13 @@ config VIDEO_NX
HDMI. This option enables this support which can be used on devices HDMI. This option enables this support which can be used on devices
which have an eDP display connected. which have an eDP display connected.
config VIDEO_SEPS525
bool "Enable video support for Seps525"
depends on DM_VIDEO
help
Enable support for the Syncoam PM-OLED display driver (RGB 160x128).
Currently driver is supporting only SPI interface.
source "drivers/video/nexell/Kconfig" source "drivers/video/nexell/Kconfig"
config VIDEO config VIDEO

View File

@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o
obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o
obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
obj-$(CONFIG_VIDEO_VESA) += vesa.o obj-$(CONFIG_VIDEO_VESA) += vesa.o
obj-$(CONFIG_VIDEO_SEPS525) += seps525.o
obj-y += bridge/ obj-y += bridge/
obj-y += sunxi/ obj-y += sunxi/

327
drivers/video/seps525.c Normal file
View File

@ -0,0 +1,327 @@
// SPDX-License-Identifier: GPL-2.0
/*
* FB driver for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
* using the SEPS525 (Syncoam) LCD Controller
*
* Copyright (C) 2020 Xilinx Inc.
*/
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <dm.h>
#include <errno.h>
#include <spi.h>
#include <video.h>
#include <asm/gpio.h>
#include <dm/device_compat.h>
#include <linux/delay.h>
#define WIDTH 160
#define HEIGHT 128
#define SEPS525_INDEX 0x00
#define SEPS525_STATUS_RD 0x01
#define SEPS525_OSC_CTL 0x02
#define SEPS525_IREF 0x80
#define SEPS525_CLOCK_DIV 0x03
#define SEPS525_REDUCE_CURRENT 0x04
#define SEPS525_SOFT_RST 0x05
#define SEPS525_DISP_ONOFF 0x06
#define SEPS525_PRECHARGE_TIME_R 0x08
#define SEPS525_PRECHARGE_TIME_G 0x09
#define SEPS525_PRECHARGE_TIME_B 0x0A
#define SEPS525_PRECHARGE_CURRENT_R 0x0B
#define SEPS525_PRECHARGE_CURRENT_G 0x0C
#define SEPS525_PRECHARGE_CURRENT_B 0x0D
#define SEPS525_DRIVING_CURRENT_R 0x10
#define SEPS525_DRIVING_CURRENT_G 0x11
#define SEPS525_DRIVING_CURRENT_B 0x12
#define SEPS525_DISPLAYMODE_SET 0x13
#define SEPS525_RGBIF 0x14
#define SEPS525_RGB_POL 0x15
#define SEPS525_MEMORY_WRITEMODE 0x16
#define SEPS525_MX1_ADDR 0x17
#define SEPS525_MX2_ADDR 0x18
#define SEPS525_MY1_ADDR 0x19
#define SEPS525_MY2_ADDR 0x1A
#define SEPS525_MEMORY_ACCESS_POINTER_X 0x20
#define SEPS525_MEMORY_ACCESS_POINTER_Y 0x21
#define SEPS525_DDRAM_DATA_ACCESS_PORT 0x22
#define SEPS525_GRAY_SCALE_TABLE_INDEX 0x50
#define SEPS525_GRAY_SCALE_TABLE_DATA 0x51
#define SEPS525_DUTY 0x28
#define SEPS525_DSL 0x29
#define SEPS525_D1_DDRAM_FAC 0x2E
#define SEPS525_D1_DDRAM_FAR 0x2F
#define SEPS525_D2_DDRAM_SAC 0x31
#define SEPS525_D2_DDRAM_SAR 0x32
#define SEPS525_SCR1_FX1 0x33
#define SEPS525_SCR1_FX2 0x34
#define SEPS525_SCR1_FY1 0x35
#define SEPS525_SCR1_FY2 0x36
#define SEPS525_SCR2_SX1 0x37
#define SEPS525_SCR2_SX2 0x38
#define SEPS525_SCR2_SY1 0x39
#define SEPS525_SCR2_SY2 0x3A
#define SEPS525_SCREEN_SAVER_CONTEROL 0x3B
#define SEPS525_SS_SLEEP_TIMER 0x3C
#define SEPS525_SCREEN_SAVER_MODE 0x3D
#define SEPS525_SS_SCR1_FU 0x3E
#define SEPS525_SS_SCR1_MXY 0x3F
#define SEPS525_SS_SCR2_FU 0x40
#define SEPS525_SS_SCR2_MXY 0x41
#define SEPS525_MOVING_DIRECTION 0x42
#define SEPS525_SS_SCR2_SX1 0x47
#define SEPS525_SS_SCR2_SX2 0x48
#define SEPS525_SS_SCR2_SY1 0x49
#define SEPS525_SS_SCR2_SY2 0x4A
/* SEPS525_DISPLAYMODE_SET */
#define MODE_SWAP_BGR BIT(7)
#define MODE_SM BIT(6)
#define MODE_RD BIT(5)
#define MODE_CD BIT(4)
/**
* struct seps525_priv - Private structure
* @reset_gpio: Reset gpio pin
* @dc_gpio: Data/command control gpio pin
* @dev: Device uclass for video_ops
*/
struct seps525_priv {
struct gpio_desc reset_gpio;
struct gpio_desc dc_gpio;
struct udevice *dev;
};
static int seps525_spi_write_cmd(struct udevice *dev, u32 reg)
{
struct seps525_priv *priv = dev_get_priv(dev);
u8 buf8 = reg;
int ret;
ret = dm_gpio_set_value(&priv->dc_gpio, 0);
if (ret) {
dev_dbg(dev, "Failed to handle dc\n");
return ret;
}
ret = dm_spi_xfer(dev, 8, &buf8, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
if (ret)
dev_dbg(dev, "Failed to write command\n");
return ret;
}
static int seps525_spi_write_data(struct udevice *dev, u32 val)
{
struct seps525_priv *priv = dev_get_priv(dev);
u8 buf8 = val;
int ret;
ret = dm_gpio_set_value(&priv->dc_gpio, 1);
if (ret) {
dev_dbg(dev, "Failed to handle dc\n");
return ret;
}
ret = dm_spi_xfer(dev, 8, &buf8, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
if (ret)
dev_dbg(dev, "Failed to write data\n");
return ret;
}
static void seps525_spi_write(struct udevice *dev, u32 reg, u32 val)
{
(void)seps525_spi_write_cmd(dev, reg);
(void)seps525_spi_write_data(dev, val);
}
static int seps525_display_init(struct udevice *dev)
{
/* Disable Oscillator Power Down */
seps525_spi_write(dev, SEPS525_REDUCE_CURRENT, 0x03);
mdelay(5);
/* Set Normal Driving Current */
seps525_spi_write(dev, SEPS525_REDUCE_CURRENT, 0x00);
mdelay(5);
seps525_spi_write(dev, SEPS525_SCREEN_SAVER_CONTEROL, 0x00);
/* Set EXPORT1 Pin at Internal Clock */
seps525_spi_write(dev, SEPS525_OSC_CTL, 0x01);
/* Set Clock as 120 Frames/Sec */
seps525_spi_write(dev, SEPS525_CLOCK_DIV, 0x90);
/* Set Reference Voltage Controlled by External Resister */
seps525_spi_write(dev, SEPS525_IREF, 0x01);
/* precharge time R G B */
seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_R, 0x04);
seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_G, 0x05);
seps525_spi_write(dev, SEPS525_PRECHARGE_TIME_B, 0x05);
/* precharge current R G B (uA) */
seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_R, 0x9D);
seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_G, 0x8C);
seps525_spi_write(dev, SEPS525_PRECHARGE_CURRENT_B, 0x57);
/* driving current R G B (uA) */
seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_R, 0x56);
seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_G, 0x4D);
seps525_spi_write(dev, SEPS525_DRIVING_CURRENT_B, 0x46);
/* Set Color Sequence */
seps525_spi_write(dev, SEPS525_DISPLAYMODE_SET, 0x00);
/* Set MCU Interface Mode */
seps525_spi_write(dev, SEPS525_RGBIF, 0x01);
/* Set Memory Write Mode */
seps525_spi_write(dev, SEPS525_MEMORY_WRITEMODE, 0x66);
/* 1/128 Duty (0x0F~0x7F) */
seps525_spi_write(dev, SEPS525_DUTY, 0x7F);
/* Set Mapping RAM Display Start Line (0x00~0x7F) */
seps525_spi_write(dev, SEPS525_DSL, 0x00);
/* Display On (0x00/0x01) */
seps525_spi_write(dev, SEPS525_DISP_ONOFF, 0x01);
/* Set All Internal Register Value as Normal Mode */
seps525_spi_write(dev, SEPS525_SOFT_RST, 0x00);
/* Set RGB Interface Polarity as Active Low */
seps525_spi_write(dev, SEPS525_RGB_POL, 0x00);
/* Enable access for data */
(void)seps525_spi_write_cmd(dev, SEPS525_DDRAM_DATA_ACCESS_PORT);
return 0;
}
static int seps525_spi_startup(struct udevice *dev)
{
struct seps525_priv *priv = dev_get_priv(dev);
int ret;
ret = dm_gpio_set_value(&priv->reset_gpio, 1);
if (ret)
return ret;
ret = dm_gpio_set_value(&priv->reset_gpio, 0);
if (ret)
return ret;
ret = dm_spi_claim_bus(dev);
if (ret) {
dev_err(dev, "Failed to claim SPI bus: %d\n", ret);
return ret;
}
ret = seps525_display_init(dev);
if (ret)
return ret;
dm_spi_release_bus(dev);
return 0;
}
static int seps525_sync(struct udevice *vid)
{
struct video_priv *uc_priv = dev_get_uclass_priv(vid);
struct seps525_priv *priv = dev_get_priv(vid);
struct udevice *dev = priv->dev;
int i, ret;
u8 data1, data2;
u8 *start = uc_priv->fb;
ret = dm_spi_claim_bus(dev);
if (ret) {
dev_err(dev, "Failed to claim SPI bus: %d\n", ret);
return ret;
}
/* start position X,Y */
seps525_spi_write(dev, SEPS525_MEMORY_ACCESS_POINTER_X, 0);
seps525_spi_write(dev, SEPS525_MEMORY_ACCESS_POINTER_Y, 0);
/* Enable access for data */
(void)seps525_spi_write_cmd(dev, SEPS525_DDRAM_DATA_ACCESS_PORT);
for (i = 0; i < (uc_priv->xsize * uc_priv->ysize); i++) {
data2 = *start++;
data1 = *start++;
(void)seps525_spi_write_data(dev, data1);
(void)seps525_spi_write_data(dev, data2);
}
dm_spi_release_bus(dev);
return 0;
}
static int seps525_probe(struct udevice *dev)
{
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
struct seps525_priv *priv = dev_get_priv(dev);
u32 buswidth;
int ret;
buswidth = dev_read_u32_default(dev, "buswidth", 0);
if (buswidth != 8) {
dev_err(dev, "Only 8bit buswidth is supported now");
return -EINVAL;
}
ret = gpio_request_by_name(dev, "reset-gpios", 0,
&priv->reset_gpio, GPIOD_IS_OUT);
if (ret) {
dev_err(dev, "missing reset GPIO\n");
return ret;
}
ret = gpio_request_by_name(dev, "dc-gpios", 0,
&priv->dc_gpio, GPIOD_IS_OUT);
if (ret) {
dev_err(dev, "missing dc GPIO\n");
return ret;
}
uc_priv->bpix = VIDEO_BPP16;
uc_priv->xsize = WIDTH;
uc_priv->ysize = HEIGHT;
uc_priv->rot = 0;
priv->dev = dev;
ret = seps525_spi_startup(dev);
if (ret)
return ret;
return 0;
}
static int seps525_bind(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
plat->size = WIDTH * HEIGHT * 16;
return 0;
}
static const struct video_ops seps525_ops = {
.video_sync = seps525_sync,
};
static const struct udevice_id seps525_ids[] = {
{ .compatible = "syncoam,seps525" },
{ }
};
U_BOOT_DRIVER(seps525_video) = {
.name = "seps525_video",
.id = UCLASS_VIDEO,
.of_match = seps525_ids,
.ops = &seps525_ops,
.platdata_auto_alloc_size = sizeof(struct video_uc_platdata),
.bind = seps525_bind,
.probe = seps525_probe,
.priv_auto_alloc_size = sizeof(struct seps525_priv),
};