diff --git a/MAKEALL b/MAKEALL index 8241f456b5..8e5dcc413a 100755 --- a/MAKEALL +++ b/MAKEALL @@ -510,6 +510,7 @@ LIST_ARM11=" \ apollon \ imx31_litekit \ imx31_phycore \ + mx31ads \ " ######################################################################### diff --git a/Makefile b/Makefile index ab5683111a..c50a9528c8 100644 --- a/Makefile +++ b/Makefile @@ -2636,6 +2636,9 @@ imx31_litekit_config : unconfig imx31_phycore_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 +mx31ads_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31 + #======================================================================== # i386 #======================================================================== diff --git a/board/mx31ads/Makefile b/board/mx31ads/Makefile new file mode 100644 index 0000000000..dfadd9685c --- /dev/null +++ b/board/mx31ads/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (C) 2008, Guennadi Liakhovetski +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := mx31ads.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mx31ads/config.mk b/board/mx31ads/config.mk new file mode 100644 index 0000000000..d34dc02d96 --- /dev/null +++ b/board/mx31ads/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x87f00000 diff --git a/board/mx31ads/lowlevel_init.S b/board/mx31ads/lowlevel_init.S new file mode 100644 index 0000000000..099a7ca81b --- /dev/null +++ b/board/mx31ads/lowlevel_init.S @@ -0,0 +1,281 @@ +/* + * Copyright (C) 2008, Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +.macro REG reg, val + ldr r2, =\reg + ldr r3, =\val + str r3, [r2] +.endm + +.macro REG8 reg, val + ldr r2, =\reg + ldr r3, =\val + strb r3, [r2] +.endm + +.macro DELAY loops + ldr r2, =\loops +1: + subs r2, r2, #1 + nop + bcs 1b +.endm + +/* RedBoot: AIPS setup - Only setup MPROTx registers. + * The PACR default values are good.*/ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =0x43F00000 + ldr r1, =0x77777777 + str r1, [r0, #0x00] + str r1, [r0, #0x04] + ldr r0, =0x53F00000 + str r1, [r0, #0x00] + str r1, [r0, #0x04] + + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ + ldr r0, =0x43F00000 + ldr r1, =0x0 + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + ldr r1, [r0, #0x50] + and r1, r1, #0x00FFFFFF + str r1, [r0, #0x50] + + ldr r0, =0x53F00000 + ldr r1, =0x0 + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + ldr r1, [r0, #0x50] + and r1, r1, #0x00FFFFFF + str r1, [r0, #0x50] +.endm /* init_aips */ + +/* RedBoot: MAX (Multi-Layer AHB Crossbar Switch) setup */ +.macro init_max + ldr r0, =0x43F04000 + /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ + ldr r1, =0x00302154 + str r1, [r0, #0x000] /* for S0 */ + str r1, [r0, #0x100] /* for S1 */ + str r1, [r0, #0x200] /* for S2 */ + str r1, [r0, #0x300] /* for S3 */ + str r1, [r0, #0x400] /* for S4 */ + /* SGPCR - always park on last master */ + ldr r1, =0x10 + str r1, [r0, #0x010] /* for S0 */ + str r1, [r0, #0x110] /* for S1 */ + str r1, [r0, #0x210] /* for S2 */ + str r1, [r0, #0x310] /* for S3 */ + str r1, [r0, #0x410] /* for S4 */ + /* MGPCR - restore default values */ + ldr r1, =0x0 + str r1, [r0, #0x800] /* for M0 */ + str r1, [r0, #0x900] /* for M1 */ + str r1, [r0, #0xA00] /* for M2 */ + str r1, [r0, #0xB00] /* for M3 */ + str r1, [r0, #0xC00] /* for M4 */ + str r1, [r0, #0xD00] /* for M5 */ +.endm /* init_max */ + +/* RedBoot: M3IF setup */ +.macro init_m3if + /* Configure M3IF registers */ + ldr r1, =0xB8003000 + /* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ + ldr r0, =0x00000040 + str r0, [r1] /* M3IF control reg */ +.endm /* init_m3if */ + +/* RedBoot: To support 133MHz DDR */ +.macro init_drive_strength + /* + * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits + * in SW_PAD_CTL registers + */ + + /* SDCLK */ + ldr r1, =0x43FAC200 + ldr r0, [r1, #0x6C] + bic r0, r0, #(1 << 12) + str r0, [r1, #0x6C] + + /* CAS */ + ldr r0, [r1, #0x70] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x70] + + /* RAS */ + ldr r0, [r1, #0x74] + bic r0, r0, #(1 << 2) + str r0, [r1, #0x74] + + /* CS2 (CSD0) */ + ldr r0, [r1, #0x7C] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x7C] + + /* DQM3 */ + ldr r0, [r1, #0x84] + bic r0, r0, #(1 << 22) + str r0, [r1, #0x84] + + /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ + ldr r2, =22 /* (0x2E0 - 0x288) / 4 = 22 */ +pad_loop: + ldr r0, [r1, #0x88] + bic r0, r0, #(1 << 22) + bic r0, r0, #(1 << 12) + bic r0, r0, #(1 << 2) + str r0, [r1, #0x88] + add r1, r1, #4 + subs r2, r2, #0x1 + bne pad_loop +.endm /* init_drive_strength */ + +/* CPLD on CS4 setup */ +.macro init_cs4 + ldr r0, =WEIM_BASE + ldr r1, =0x0000D843 + str r1, [r0, #0x40] + ldr r1, =0x22252521 + str r1, [r0, #0x44] + ldr r1, =0x22220A00 + str r1, [r0, #0x48] +.endm /* init_cs4 */ + +.globl lowlevel_init +lowlevel_init: + + /* Redboot initializes very early AIPS, what for? + * Then it also initializes Multi-Layer AHB Crossbar Switch, + * M3IF */ + /* Also setup the Peripheral Port Remap register inside the core */ + ldr r0, =0x40000015 /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 + + init_aips + + init_max + + init_m3if + + init_drive_strength + + init_cs4 + + /* Image Processing Unit: */ + /* Too early to switch display on? */ + REG IPU_CONF, IPU_CONF_DI_EN /* Switch on Display Interface */ + /* Clock Control Module: */ + REG CCM_CCMR, 0x074B0BF5 /* Use CKIH, MCU PLL off */ + + DELAY 0x40000 + + REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE /* MCU PLL on */ + REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS /* Switch to MCU PLL */ + + /* PBC CPLD on CS4 */ + mov r1, #CS4_BASE + ldrh r1, [r1, #0x2] + /* Is 27MHz switch set? */ + ands r1, r1, #0x16 + + /* 532-133-66.5 */ + ldr r0, =CCM_BASE + ldr r1, =0xFF871D58 + /* PDR0 */ + str r1, [r0, #0x4] + ldreq r1, MPCTL_PARAM_532 + ldrne r1, MPCTL_PARAM_532_27 + /* MPCTL */ + str r1, [r0, #0x10] + + /* Set UPLL=240MHz, USB=60MHz */ + ldr r1, =0x49FCFE7F + /* PDR1 */ + str r1, [r0, #0x8] + ldreq r1, UPCTL_PARAM_240 + ldrne r1, UPCTL_PARAM_240_27 + /* UPCTL */ + str r1, [r0, #0x14] + /* default CLKO to 1/8 of the ARM core */ + mov r1, #0x000002C0 + add r1, r1, #0x00000006 + /* COSR */ + str r1, [r0, #0x1c] + + /* RedBoot sets 0x1ff, 7, 3, 5, 1, 3, 0 */ +/* REG CCM_PDR0, PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | PDR0_MCU_PODF(0)*/ + + /* Redboot: 0, 51, 10, 12 / 0, 14, 9, 13 */ +/* REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | PLL_MFN(0x23)*/ + /* Default: 1, 4, 12, 1 */ + REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) + + /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */ + REG 0xB8001010, 0x00000004 + REG 0xB8001004, 0x006ac73a + REG 0xB8001000, 0x92100000 + REG 0x80000f00, 0x12344321 + REG 0xB8001000, 0xa2100000 + REG 0x80000000, 0x12344321 + REG 0x80000000, 0x12344321 + REG 0xB8001000, 0xb2100000 + REG8 0x80000033, 0xda + REG8 0x81000000, 0xff + REG 0xB8001000, 0x82226080 + REG 0x80000000, 0xDEADBEEF + REG 0xB8001010, 0x0000000c + + mov pc, lr + +MPCTL_PARAM_532: + .word (((1-1) << 26) + ((52-1) << 16) + (10 << 10) + (12 << 0)) +MPCTL_PARAM_532_27: + .word (((1-1) << 26) + ((15-1) << 16) + (9 << 10) + (13 << 0)) +UPCTL_PARAM_240: + .word (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0)) +UPCTL_PARAM_240_27: + .word (((2-1) << 26) + ((9 -1) << 16) + (8 << 10) + (8 << 0)) diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c new file mode 100644 index 0000000000..7c50c023ec --- /dev/null +++ b/board/mx31ads/mx31ads.c @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2008, Guennadi Liakhovetski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +int board_init (void) +{ + int i; +#if 0 + /* CS0: Nor Flash */ + /* + * These are values from the RedBoot sources by Freescale. However, + * under U-Boot with this configuration 32-bit accesses don't work, + * lower 16 bits of data are read twice for each 32-bit read. + */ + __REG(CSCR_U(0)) = 0x23524E80; + __REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but + * disabling it doesn't help either */ + __REG(CSCR_A(0)) = 0x00720900; +#endif + + /* setup pins for UART1 */ + mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); + mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); + mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); + mx31_gpio_mux(MUX_RTS1__UART1_CTS_B); + + /* PBC setup */ + /* Enable UART transceivers also reset the Ethernet/external UART */ + readw(CS4_BASE + 4); + + writew(0x8023, CS4_BASE + 4); + + /* RedBoot also has an empty loop with 100000 iterations here - + * clock doesn't run yet */ + for (i = 0; i < 100000; i++) + ; + + /* Clear the reset, toggle the LEDs */ + writew(0xDF, CS4_BASE + 6); + + /* clock still doesn't run */ + for (i = 0; i < 100000; i++) + ; + + /* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */ + readb(CS4_BASE + 8); + readb(CS4_BASE + 7); + readb(CS4_BASE + 8); + readb(CS4_BASE + 7); + + gd->bd->bi_arch_number = 447; /* board id for linux */ + gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */ + + return 0; +} + +int checkboard (void) +{ + printf("Board: MX31ADS\n"); + return 0; +} diff --git a/board/mx31ads/u-boot.lds b/board/mx31ads/u-boot.lds new file mode 100644 index 0000000000..1460adcdd8 --- /dev/null +++ b/board/mx31ads/u-boot.lds @@ -0,0 +1,59 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h index d04072e672..02b7dcbcb4 100644 --- a/include/asm-arm/arch-mx31/mx31-regs.h +++ b/include/asm-arm/arch-mx31/mx31-regs.h @@ -138,5 +138,19 @@ #define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI) #define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO) +/* + * Memory regions and CS + */ +#define IPU_MEM_BASE 0x70000000 +#define CSD0_BASE 0x80000000 +#define CSD1_BASE 0x90000000 +#define CS0_BASE 0xA0000000 +#define CS1_BASE 0xA8000000 +#define CS2_BASE 0xB0000000 +#define CS3_BASE 0xB2000000 +#define CS4_BASE 0xB4000000 +#define CS4_PSRAM_BASE 0xB5000000 +#define CS5_BASE 0xB6000000 +#define PCMCIA_MEM_BASE 0xC0000000 #endif /* __ASM_ARCH_MX31_REGS_H */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h new file mode 100644 index 0000000000..77a9a83662 --- /dev/null +++ b/include/configs/mx31ads.h @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2008, Guennadi Liakhovetski + * + * Configuration settings for the MX31ADS Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ +#define CONFIG_MX31_CLK32 32000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* + * Disabled for now due to build problems under Debian and a significant increase + * in the final file size: 144260 vs. 109536 Bytes. + */ +#if 0 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#endif + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#define CONFIG_MX31_UART 1 +#define CFG_MX31_UART1 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include + +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.23.168 +#define CONFIG_SERVERIP 192.168.23.2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 uImage-mx31; bootm\0" \ + "prg_uboot=tftpboot 0x80000000 u-boot-mx31ads.bin; protect off 0xa0000000 0xa001ffff; erase 0xa0000000 0xa001ffff; cp.b 0x80000000 0xa0000000 $(filesize)\0" + + +#define CONFIG_DRIVER_CS8900 1 +#define CS8900_BASE 0xb4020300 +#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0 /* memtest works on */ +#define CFG_MEMTEST_END 0x10000 + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR CSD0_BASE /* default load address */ + +#define CFG_HZ 32000 + +#define CONFIG_CMDLINE_EDITING 1 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE CS0_BASE +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128KiB */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE (32 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +/* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end. + * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors, + * if we put environment next to it, we will have to occupy 128KiB for it. + * Putting it at the top of flash we use only 32KiB. */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 32 * 1024 * 1024 - CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#if 0 /* Doesn't work yet, work in progress */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#endif +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* + * JFFS2 partitions + */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nor0" + +#endif /* __CONFIG_H */